Hi, Im having a problem trying to restore the stock rom on my friend's sister's galaxy s3 because whenever I try to start it up it gets stuck on the Samsung Galaxy s3 logo. So I downloaded the stock rom from sammobile and when I try to put it into odin it says "The parameter is incorrect" I tried to remove the .md5 at the end but when I put it in and press start this shows up. (Picture is attached)
The stock rom that I am using is this (Picture is attached)
And here is all the info I know so far about the phone:
MODEL: GT-I9300
FCC ID: A3LGTI9300A
SSN: -19300GSMH
Thank you
Related
Hi,
I have a Samsung Galaxy Note II locked to Bell Canada (BMC) SGH-i317M.
This afternoon, I tried to purchase an unlock code for my cellphone and I've read that I need to downgrade a firmware from 4.1.2 to 4.1.1 in
order to successfully unlock it.
So I've downloaded Odin and 4.1.1 firmware and I have done everything as the instruction from the website.
After Odin program showed "Green Pass", it automatically rebooted and here's my problem.
No matter how many times I reboot it, it just stops where "Samsung" logo shows.
I felt something went wrong so I tried it again with 4.1.1 firmware. (But, failed)
Then I wanted to restore it back to 4.1.2 and when I downloaded and installed it with Odin.
Perhaps, the 4.1.2 firmware file is something wrong or else. I fail to complete installing 4.1.2 and it shows message saying
"error occured with upgrade, please try Kies to restore it".
But, my computer does not even recognize Galaxy note II.
I've tried to download firmware files from Samfirmware(shows me error message that I cannot download it now)
It's been almost 9 hours since Galaxy note II soft bricked.
Can anyone help me with this problem, please?
Try this install like a normal rom wipe everything data and Cache
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using xda app-developers app
Hi, Im having a problem trying to restore the stock rom on my friend's sister's galaxy s3 because whenever I try to start it up it gets stuck on the Samsung Galaxy s3 logo. So I downloaded the stock rom from sammobile and when I try to put it into odin it says "The parameter is incorrect" I tried to remove the .md5 at the end but when I put it in and press start this shows up. (Picture is attached)
The stock rom that I am using is this (Picture is attached)
And here is all the info I know so far about the phone:
MODEL: GT-I9300
FCC ID: A3LGTI9300A
SSN: -19300GSMH
Thank you
Cellphone4Chicago said:
Hi, Im having a problem trying to restore the stock rom on my friend's sister's galaxy s3 because whenever I try to start it up it gets stuck on the Samsung Galaxy s3 logo. So I downloaded the stock rom from sammobile and when I try to put it into odin it says "The parameter is incorrect" I tried to remove the .md5 at the end but when I put it in and press start this shows up. (Picture is attached)
The stock rom that I am using is this (Picture is attached)
And here is all the info I know so far about the phone:
MODEL: GT-I9300
FCC ID: A3LGTI9300A
SSN: -19300GSMH
Thank you
Click to expand...
Click to collapse
Your in the wrong forum, GT-i9300 is the international variant.
I had mistakenly deleted a stock app on my I317M phone I had recently got after had rooting it.
I have attempted to put the phone into recovery mode, wiping the phone back to default settings, apps, etc.
I then realized that factory resetting a rooted phone DOES NOT help.
I downloaded the stock firmware
www DOT sammobile DOT com/firmwares/download/31935/I317MVLUDNF3_I317MOYADNF3_RWC/
I figured it was this one because "I317MVLUDNF3" matched with the numbers in the system settings.
Ever since I flashed that file onto my phone, I get stuck on the logo.
I can get into download mode on the phone, but cannot go into recovery mode and my phone doesn't start past the logo.
What do I do? Please help!
The phone is 4.4.2 KitKat AT&T Galaxy Note ll
please please please please please help
Hello, i recently recieved a S5830i with what seems to be a custom ROM. The problem is the phone stays at the Samsung screen, so i wanted to put it back to original ROM. Phone is Rooted and CWM is installed. Upon downloading the Firmware and using Odin, some error pops up and i have no idea what to do. I have picture of the problem, but i cannot upload it yet.
Wrong section, please move to appropriate.
Hey guys!
I tried to root my S4 Mini GT-I9195I using the steps from here: https://forum.xda-developers.com/showthread.php?t=2387341, but at 2nd step i forgot to uncheck F. Reset Time, so my phone show only the "Downloading..." screen when i press power button (appears the Samsung Galaxy S4 Mini logo, then enters in Downloading mode).
I tried to reinstall the stock firmware using "CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar", but i got this error: (sbl1) http://prntscr.com/jl27cd.
Also i tried with "I9195XXUCOD3_I9195BTUCOD1_I9195XXUCOD3_HOME.tar", but i got this error: (aboot) http://prntscr.com/jl28pm.
When i tried to flash the pit using "SERRANOLTE_EUR_OPEN_HIDDEN200M.pit" i got this error: "secure check failit" http://prntscr.com/jl29sq. Also i tried with "JFVELTE_EUR_OPEN.pit", but i got the same result.
My phone is Samsung Galaxy S4 Mini GT-I9195I , bought from Romania - Vodafone.
Anyone knows any solution? Thanks in advance!
The i9195i (serranovelte) and the i9195 (serranolte) are two different devices.
So you have to use recovery and rom for your actual phone.
You could try to flash the twrp for your phone: https://twrp.me/samsung/samsunggalaxys4mini64bit.html
And lineage: https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-cyanogenmod-14-1-t3522169
Good luck, bringing your device back.
thorium231 said:
The i9195i (serranovelte) and the i9195 (serranolte) are two different devices.
So you have to use recovery and rom for your actual phone.
You could try to flash the twrp for your phone: https://twrp.me/samsung/samsunggalaxys4mini64bit.html
And lineage: https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-cyanogenmod-14-1-t3522169
Good luck, bringing your device back.
Click to expand...
Click to collapse
Thank you so much! It worked with twrp-3.0.2-0-serranoveltexx. :highfive:
Now i use Lineage 14.1, i didn´t find a stock firmware and pit for the i9195i (serranovelte).