[Q] Need help with odin (the parameter is incorrect) - Sprint Samsung Galaxy S III

Hi, Im having a problem trying to restore the stock rom on my friend's sister's galaxy s3 because whenever I try to start it up it gets stuck on the Samsung Galaxy s3 logo. So I downloaded the stock rom from sammobile and when I try to put it into odin it says "The parameter is incorrect" I tried to remove the .md5 at the end but when I put it in and press start this shows up. (Picture is attached)
The stock rom that I am using is this (Picture is attached)
And here is all the info I know so far about the phone:
MODEL: GT-I9300
FCC ID: A3LGTI9300A
SSN: -19300GSMH
Thank you

Cellphone4Chicago said:
Hi, Im having a problem trying to restore the stock rom on my friend's sister's galaxy s3 because whenever I try to start it up it gets stuck on the Samsung Galaxy s3 logo. So I downloaded the stock rom from sammobile and when I try to put it into odin it says "The parameter is incorrect" I tried to remove the .md5 at the end but when I put it in and press start this shows up. (Picture is attached)
The stock rom that I am using is this (Picture is attached)
And here is all the info I know so far about the phone:
MODEL: GT-I9300
FCC ID: A3LGTI9300A
SSN: -19300GSMH
Thank you
Click to expand...
Click to collapse
Your in the wrong forum, GT-i9300 is the international variant.

Related

[Q] Please help me restore Galaxy Note II

Hi,
I have a Samsung Galaxy Note II locked to Bell Canada (BMC) SGH-i317M.
This afternoon, I tried to purchase an unlock code for my cellphone and I've read that I need to downgrade a firmware from 4.1.2 to 4.1.1 in
order to successfully unlock it.
So I've downloaded Odin and 4.1.1 firmware and I have done everything as the instruction from the website.
After Odin program showed "Green Pass", it automatically rebooted and here's my problem.
No matter how many times I reboot it, it just stops where "Samsung" logo shows.
I felt something went wrong so I tried it again with 4.1.1 firmware. (But, failed)
Then I wanted to restore it back to 4.1.2 and when I downloaded and installed it with Odin.
Perhaps, the 4.1.2 firmware file is something wrong or else. I fail to complete installing 4.1.2 and it shows message saying
"error occured with upgrade, please try Kies to restore it".
But, my computer does not even recognize Galaxy note II.
I've tried to download firmware files from Samfirmware(shows me error message that I cannot download it now)
It's been almost 9 hours since Galaxy note II soft bricked.
Can anyone help me with this problem, please?
Try this install like a normal rom wipe everything data and Cache
http://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using xda app-developers app

Need Help with odin stock rom

Hi, Im having a problem trying to restore the stock rom on my friend's sister's galaxy s3 because whenever I try to start it up it gets stuck on the Samsung Galaxy s3 logo. So I downloaded the stock rom from sammobile and when I try to put it into odin it says "The parameter is incorrect" I tried to remove the .md5 at the end but when I put it in and press start this shows up. (Picture is attached)
The stock rom that I am using is this (Picture is attached)
And here is all the info I know so far about the phone:
MODEL: GT-I9300
FCC ID: A3LGTI9300A
SSN: -19300GSMH
Thank you

Samsung GT S5830i - cannot install original ROM

Hello, i recently recieved a S5830i with what seems to be a custom ROM. The problem is the phone stays at the Samsung screen, so i wanted to put it back to original ROM. Phone is Rooted and CWM is installed. Upon downloading the Firmware and using Odin, some error pops up and i have no idea what to do. I have picture of the problem, but i cannot upload it yet.
Wrong section, please move to appropriate.

Samsung Galaxy Tab 3 Lite SM-T111 in a bootloop

Hi, my Galaxy Tab 3 Lite has gone into a restart loop.
If I try to do a factory reset I just get a dead android with a "no command" message and I cannot access the menu.
The phone then goes into the retart loop again after a few sec.
I've tried using Odin to flash a new firmware(downloaded in sammobile) but it always failed after the DTim.Recovery
Any ideas? Thanks
During the bootloop, i saw Samsung Galaxy Tab 3 Lite SM-T111, but when i go to sammobile, the model is SM-T111M. Is there an different?
hmm...tried the TWRP but it failed at RQT_CLOSE...any help pls?
samsung tab 3 lite sm t111 hang on logo
GoneLink said:
hmm...tried the TWRP but it failed at RQT_CLOSE...any help pls?
Click to expand...
Click to collapse
hi brother, i have the same problem except i can install firmware from odin without any problem but still no life on the tab...any solution
This website.......
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
....is full of what they call 'repair' firmwares. The firmwares are downloaded as zips that contain multiple files that have to be loaded into Odin in their respective 'slots'. The zips also contain the device .pit file. These firmwares/pits will give anybody in your position the best chance of recovering their Tabs.....
Sent from my SM-G900F using XDA Labs
thanks!! I will give it a try and let you know the result :good:
this procedure also failed bro

Samsung Galaxy S4 Mini GT-I9195I pit error, sbl1 error and aaboot error

Hey guys!
I tried to root my S4 Mini GT-I9195I using the steps from here: https://forum.xda-developers.com/showthread.php?t=2387341, but at 2nd step i forgot to uncheck F. Reset Time, so my phone show only the "Downloading..." screen when i press power button (appears the Samsung Galaxy S4 Mini logo, then enters in Downloading mode).
I tried to reinstall the stock firmware using "CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar", but i got this error: (sbl1) http://prntscr.com/jl27cd.
Also i tried with "I9195XXUCOD3_I9195BTUCOD1_I9195XXUCOD3_HOME.tar", but i got this error: (aboot) http://prntscr.com/jl28pm.
When i tried to flash the pit using "SERRANOLTE_EUR_OPEN_HIDDEN200M.pit" i got this error: "secure check failit" http://prntscr.com/jl29sq. Also i tried with "JFVELTE_EUR_OPEN.pit", but i got the same result.
My phone is Samsung Galaxy S4 Mini GT-I9195I , bought from Romania - Vodafone.
Anyone knows any solution? Thanks in advance!
The i9195i (serranovelte) and the i9195 (serranolte) are two different devices.
So you have to use recovery and rom for your actual phone.
You could try to flash the twrp for your phone: https://twrp.me/samsung/samsunggalaxys4mini64bit.html
And lineage: https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-cyanogenmod-14-1-t3522169
Good luck, bringing your device back.
thorium231 said:
The i9195i (serranovelte) and the i9195 (serranolte) are two different devices.
So you have to use recovery and rom for your actual phone.
You could try to flash the twrp for your phone: https://twrp.me/samsung/samsunggalaxys4mini64bit.html
And lineage: https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-cyanogenmod-14-1-t3522169
Good luck, bringing your device back.
Click to expand...
Click to collapse
Thank you so much! It worked with twrp-3.0.2-0-serranoveltexx. :highfive:
Now i use Lineage 14.1, i didnĀ“t find a stock firmware and pit for the i9195i (serranovelte).

Categories

Resources