screen broken no boot? - T-Mobile Samsung Galaxy S 4

i dropped my S4 and it broke the LCD/Digitizer. now for some reason it wont even turn on.
can anybody tell me if the device will not turn on if the screen is broke? when i hold the power button, it just vibrates once and thats it, no lights or anything.
or is it possible something on the inside has been damaged to cause it not to turn on?
i can get it replaced through my insurance, but id rather get the screen replaced if i can because there is a lot of sensitive data on there that i need to recover some how.

If you feel a vibration after pressing the power button the phone IS powering on. You just can't see anything due to the screen being broke. You can try connecting your phone to your computer via USB and hope that the MTP Application loads up so that you can view your Internal and External SD cards under Removable Drives on your computer. Try connecting your phone about a minute after you feel the vibration when pressing the power button. Hopefully the kind of data you are trying to recover is on either of the SD cards.
Sent from my SGH-M919 using xda premium

I think I know exactly what you're talking about OP. Does the phone vibrate quickly like it's going to power on then nothing happens? I broke a screen on my S4 and it wouldn't turn on. I just recently connected a good screen to my phone that was having the same issue as yours and it powered on immediately. So, I'm fairly sure the screen is the reason why your phone isn't turning on?

brian117 said:
If you feel a vibration after pressing the power button the phone IS powering on. You just can't see anything due to the screen being broke. You can try connecting your phone to your computer via USB and hope that the MTP Application loads up so that you can view your Internal and External SD cards under Removable Drives on your computer. Try connecting your phone about a minute after you feel the vibration when pressing the power button. Hopefully the kind of data you are trying to recover is on either of the SD cards.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
thanks, tried this.
my computer does see that the phone is connected. but MTP does not activate. could this be because i have a screen lock pattern?

autonami said:
thanks, tried this.
my computer does see that the phone is connected. but MTP does not activate. could this be because i have a screen lock pattern?
Click to expand...
Click to collapse
I don't think the lock screen pattern should affect it, no. It usually boots up and displays the little USB icon in the top left as soon as its plugged in regardless of the phone being locked.
Stupid question but do you think the digitizer really is broken? You might be able to still draw the pattern for the lock screen and see if anything happens. Sorry this had to happen to you. Replacing the screen yourself might be the best bet. Or finding a service online. I'm sure it's easy to do.
Sent from my SGH-M919 using xda premium

I think the lock screen pattern does indeed affect it. I had a friend who broke her screen and was unable to access her files because of the pattern.
Sent from my SGH-M919 using XDA Premium 4 mobile app

Related

Unresponsive while copying files from pc to the phone

Anyone have an idea of why my G2 becomes extremely unresponsive whenever I copy files from the pc to the sd card on the phone?
I think its probably the pc not supplying the phone with enough power when plug with the usb, since it practically barely charges it if it does but it only happens when I copy files. When file finishes copying into the phone the unresponsiveness immediately goes away. Anyone ever face this problem?
Sent from my T-Mobile G2 using XDA Premium App
When I mean unresponsive I mean like doesn't even responds at all to anything I do to it and just freezes, than I turn the screen off and try to turn it back on but it won't even tuen back on after I press and the home menu back and search button would light up with the screen off
Sent from my T-Mobile G2 using XDA Premium App

Epic Download/Recovery mode with Bad Power Button?

I have an Epic 4G with a power button that will not respond, period. Phone is off and responds to the charger/usb cable being plugged in and all other keys cause the phone to "light up" when charging, but the power button istelf does nothing.
So, assuming the power button was bad, I ordered a new power button assy and installed it. It too will not work. There appears to be no physical damage to any of the ribbon cables, connectors, or boards inside the phone. The phone was Manufactured a month ago, so is fairly new and has gotten little use.
The phone's esn is bad, and my intentions were to flash it to cricket for a customer, so sending it Sprint is abviously not an option. Sending it to Samsung is also not an option since the phone has now been disassembled.
Is there any way to get the phone to "POWER ON" with any other button combination?
I have tried:
Plugging in USB Cable while holding 1 key: Does nothing
Holding VOL-DN + Camera + PWR while pluggin in USB: Does nothing
The phone only responds with the charging indicator (which the battery is now full).
Is there any other way to Force it into Download or Recovery Mode without a working power button?
Any help/advice would be greatly appreciated. Thanks!
I know a jig will work for download mode but I'm not too sure about recovery other than using rom manager to boot into recovery.... worst case senerio sell it for parts the screen etc etc.
I remember hearing someone using odin for turning the screen on search about it?
Would be really cool if you could remap the power button to something else but I know certain lockscreen apps or ROMs will allow for phone to be awaken by the camera button.
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Hold 1 and then plug the phone in to USB. It will then boot into download mode. For recovery, hold vol down, camera, and then plug into USB.
Edit: just read that didn't work. Try taking out the SD card and battery and letting it sit for 2 hours then try again with the battery and SD out.
Sent from my SPH-D700 using XDA App
marcusant said:
Hold 1 and then plug the phone in to USB. It will then boot into download mode. For recovery, hold vol down, camera, and then plug into USB.
Edit: just read that didn't work. Try taking out the SD card and battery and letting it sit for 2 hours then try again with the battery and SD out.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I was able to get it to boot up by plugging in the USB cable and unplugging it at the right time. But the phone doesn't respond to the slider, power button, or 2nd "click" of the camera button. However 1st click of the camera button and volume buttons work.
while playing around with it after about 10 mins the display switched itself to landscape mode and the keyboard backlight comes on, as if it has been "slid" open. If I slide it open and closed, it remains in that mode, as if it still thinks its slid open. However not all the keys on the keyboard are responding/working, but most are.
jasew503 said:
I was able to get it to boot up by plugging in the USB cable and unplugging it at the right time. But the phone doesn't respond to the slider, power button, or 2nd "click" of the camera button. However 1st click of the camera button and volume buttons work.
while playing around with it after about 10 mins the display switched itself to landscape mode and the keyboard backlight comes on, as if it has been "slid" open. If I slide it open and closed, it remains in that mode, as if it still thinks its slid open. However not all the keys on the keyboard are responding/working, but most are.
Click to expand...
Click to collapse
I don't think there's any hope for that phone... seems like its going to hell one "key" at a time
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Biggoron said:
I don't think there's any hope for that phone... seems like its going to hell one "key" at a time
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Click to expand...
Click to collapse
hmm, the problem isn't progressive, so it not getting better or worse. The only thing I can think of is a bad connection or the replacement Chinese cheap ass power button assembly is also bad.
the phone is only a month old.
Originally Posted by marcusant
Hold 1 and then plug the phone in to USB. It will then boot into download mode. For recovery, hold vol down, camera, and then plug into USB.
Edit: just read that didn't work. Try taking out the SD card and battery and letting it sit for 2 hours then try again with the battery and SD out.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I was able to get it to boot up by plugging in the USB cable and unplugging it at the right time. But the phone doesn't respond to the slider, power button, or 2nd "click" of the camera button. However 1st click of the camera button and volume buttons work.
while playing around with it after about 10 mins the display switched itself to landscape mode and the keyboard backlight comes on, as if it has been "slid" open. If I slide it open and closed, it remains in that mode, as if it still thinks its slid open. However not all the keys on the keyboard are responding/working, but most are.
Click to expand...
Click to collapse
When you get it to notice the keyboard slid open, pull the battery or turn it off then hold 1 and plug the phone in? That's my guess
Sent from my SPH-D700 using xda premium
I replaced the power button assy with the stock one from samsung knowing the power button is faulty, and got the phone to power back up jigging the usb cable in/out until the samsung logo appeared. The slide open/closed works perfect, and all other buttons and keyboard keys work fine as well (except the power button of course.)
This would leave me to believe the cheap chinese replacement board from ebay is bad to begin with. So ill have to order another one from a different seller/manufacturer.
I had installed the rooted UrbanPrecision X2 Gingerbread EI22 ROM with CWM Recvovery 5 before the power button failed a couple of weeks ago, and its working fine, but Id like to install the stock EC05 GB Rom to it through odin/recovery.
So my next question: Is there a way to emulate the power button with an app or something? Or enter Download/Recovery Mode from an app within the phone without using the power button?
Thanks again.
maybe this?
If worse comes to worse you can try this http://forum.xda-developers.com/showthread.php?t=1274999 which allows access to the most basic parts of the phone from what i understand. The only issue is you would have to use the ressurector every time to boot. also if you get it to boot with out this you can just use adb commands to boot into recovery and download mode if its powered on. The commands are adb reboot recovery, and adb reboot download
Wait that's right there's commands for download mode that you can put into the terminal emulator right?
Sent from my SPH-D700 using xda premium
i dont know how that would work, because they are adb commands, but he could try going into terminal emulator and simply typing reboot recovery or reboot download
Update Good thinking ac16313, just tested it. If he types su to get full system access reboot recovery definitely works( tested). Unfortunately download mode will not work though ( at least on cyanogenmod it just reboots). That would required adb reboot download via computer.
How could the Esn be bad if the phone was manufactured a month ago?
Sent from my SPH-D700 using xda premium
xjayman said:
How could the Esn be bad if the phone was manufactured a month ago?
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Stolen.....
Sent from my SPH-D700 using xda premium
what happened
Have you found a solution, will it boot, and do the commands through terminal emulator or adb work?
I just got back from the sprint repair center where thankfully they told me there was an issue with there latest updates for the epic 4g with these symptoms. They downgraded the phone back to EC05 and now i have none of the symptoms anymore! Aside from feeling a bit sheepish for only trying to ODIN back to EL30 i'm very happy about the free fix! Fortunately it's my wife's phone so it's not too big a deal for it to remain downgraded. Hope this info helps somebody else!

[Q] My phone freaked out on me?!

My phone froze, so naturally I held down the power button to get the restart option. Then it kept restarting over and over never making it past red eyeball looking screen. So I popped the battery out, waited a while and put it back in to turn back on. Nothing even if I try to charge it..nada, not eve the light on the front that lets you know its charging. Ive read about holding the volume down button + power to do a factory reset...nothing happens...Did I do something wrong or is phone fried?
kryptickitty said:
My phone froze, so naturally I held down the power button to get the restart option. Then it kept restarting over and over never making it past red eyeball looking screen. So I popped the battery out, waited a while and put it back in to turn back on. Nothing even if I try to charge it..nada, not eve the light on the front that lets you know its charging. Ive read about holding the volume down button + power to do a factory reset...nothing happens...Did I do something wrong or is phone fried?
Click to expand...
Click to collapse
Can you plug the phone into the computer and the computer recognizes something plugged in??
Sent from my SGH-I747 using xda premium
soljafree said:
Can you plug the phone into the computer and the computer recognizes something plugged in??
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I've tried to see if it would charge from the computer no luck either. Computer doesn't recognize a device

[Q] Won't boot into anything

Hey,
So I just got this GNex from eBay and it won't boot at all. If I plug it into the wall it will show the battery charging and show it filling up 3 times and then go black. I've tried plugging it into the computer and pulling the battery quickly to get it to boot and nothing. Is there anything I can do to flash/boot into the device or am I stuck relying on the store to do something about it? I've done several searches on the forum and google and I haven't found anything beneficial.
Thanks!
I would say it's dead. Try holding down the power button while holding down the volume up and volume down buttons all at once. If it should vibrate let go of the power button and see if it will enter fast boot. If not send it back.
bstevens23 said:
Hey,
So I just got this GNex from eBay and it won't boot at all. If I plug it into the wall it will show the battery charging and show it filling up 3 times and then go black. I've tried plugging it into the computer and pulling the battery quickly to get it to boot and nothing. Is there anything I can do to flash/boot into the device or am I stuck relying on the store to do something about it? I've done several searches on the forum and google and I haven't found anything beneficial.
Thanks!
Click to expand...
Click to collapse
thats the normal behavior when you plug it in, 3 times filling up then black. then when you press the power button, three times fill up then black. to me it sounds like your power button is broken.
I think power button is broken. Possibly volume keys as well. I'm able to boot if I plug into the PC and then wiggle the battery. There's a lock pattern so I can't get past it but I'm unable to adjust volume or turn the screen off/on. I'm going to bring it to the sprint store tomorrow and say it won't turn on.
Thanks!
Sent from my SPH-D700 using xda app-developers app
Looks like the phone got wet. I can boot it up with the PC as mentioned before but its locked and I don't know the pattern/gmail account. Is there anyway to put a phone into USB debugging without getting into the phone? How about fast boot/recovery/download mode without volume down or power buttons?
Sent from my SPH-D700 using xda app-developers app

sprint galaxy s II will not turn on no more

Hello to all yesterday, I tried to hook up a speaker system to the audio port on my phone to listen to music, and the screen fizzed up and turned purple. None of the buttons will work so after trying everything I just took out the battery. but since then the phone will not turn on( even after charging) when I press the power on button, the indication light (which usually turns blue while starting). just blinks purple and does nothing, not even a vibration. My question is where do I go from here, is the phone bricked? if so is it possible to get my pics, which I believe is on the phones internal memory not the sd card. any help info. is well appreciated.
thanks in advance
See if you can get into download mode. Power off completely. Then hold power button + volume down, then volume up to confirm. If you can try an Odin one click full restore no data
Sent from my SPH-D710 using xda premium
leaderbuilder said:
See if you can get into download mode. Power off completely. Then hold power button + volume down, then volume up to confirm. If you can try an Odin one click full restore no data
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I wont go into download mode when I try power + vol down the indicator light just blinks purple and nothing else. when I try to hook up to a computer through the usb cable it also does nothing. the computer does not recognize the phone either, this does not look good
nfixit said:
Hello to all yesterday, I tried to hook up a speaker system to the audio port on my phone to listen to music, and the screen fizzed up and turned purple. None of the buttons will work so after trying everything I just took out the battery. but since then the phone will not turn on( even after charging) when I press the power on button, the indication light (which usually turns blue while starting). just blinks purple and does nothing, not even a vibration. My question is where do I go from here, is the phone bricked? if so is it possible to get my pics, which I believe is on the phones internal memory not the sd card. any help info. is well appreciated.
thanks in advance
Click to expand...
Click to collapse
its sounds like hardware failure. if it is, no you cannot get anything from the phone, you need a whole new device
TheAtheistOtaku is right. Bight the bullet and get it replaced.

Categories

Resources