Develop Bugs

[APP] Samsung Smart view Dual View

I will not be monitoring this thread, I have a T-Mobile T999 but wanted to share this with the SGS3 community at large. Feel free to post results, and any additional mods (ie. Getting it to work with ASOP Rom's) in my original thread
For some reason, beyond my comprehension, Samsung have this great app, but have yet to open it up to the SGS3. I have been resorting to downloading it and installing it on my HTC HD2 (Running CM9) backing it up with Titanium, and then copying the backup over to my SGS3, and restoring the backup. A bit round about, but works.
The App, for those that don't know, allows you, with a Samsung high-end TV or BR-Player, use the app to not only as a remote, but as a second mirrored screen, with audio. Great for trips to the kitchen, bathroom, outside, or in another room (although range is limited by your router).
[Supported TV Models]
- Samsung Smart TV released in 2011:
Models greater or equal to LED 7000, PDP 8000
- Samsung Smart TV released in 2012:
Models greater or equal to LED ES7500,(Models greater or equal to LED ES7000 in Europe, Models greater or equal to PDP E8000 Models(E7000 Models in North America)
[Supported Phone]
While technically only SGS2, it works with SGS3 stock rooted rom, but should work on most with a stock base. It will not work on CM9/10 and ASOP ROM's but you could give it a try and let me know.
Here is the actual app, I extracted it from my Titanium backup figuring someone could use it until Samsung get around to updating the Market to let you just download it. The only thing I can't get to work is Bluetooth power on. I can pair with my TV, but it just doesn't show up until I have turned it on. I also had an issue with it working over the the 5Ghz 802.11n band, but with 3.1.9 that doesn't seem to be an issue anymore.
Version 3.1.9 - 39MB - Confirmed Working for me with 2011 PDP51D8000 Model
Version 3.2.0 - 40MB - Also Confirmed working
The Full description from Google Play:
[About the Application]
This application is Wi-Fi remote control for Samsung Smart TV. If both your phone and TV are connected to the same wireless Router, your phone will link to the TV automatically where you can use your phone like a remote control. The TV can also transfer live feeds to your phone.
[Main Features]
- Dual View
Enjoy TV and other multimedia right from your mobile device that’s connected to Samsung Smart TV. You can even send what you’re watching on your mobile device to TV and watch it from TV.
- Bluetooth PowerOn {I will add, never got this to work, despite pairing TV}
You can use your mobile device to turn on your TV using Bluetooth (available for certain TV and mobile devices only).
- Remote
Your mobile device can work as remote for your Samsung TV or BD products. Full remote screen is provided by default, and three tabs are provided at the bottom of the screen to help you control connected devices with ease. On screen keyboard shows up automatically when you need to enter text.
- Game Controller
With this feature, your mobile device can control games on TV. Full and Simple modes are available. Turn on Gyro function on your mobile device, and control games by tilting your mobile device.
- Movie Note (Models BD-E5900 or above, HTE4000or above (US only))
You can get information of DVD/BD title on your mobile, while you watching movies.
Ratings, synopsis, cast and director's information will be provided.
- Audio Settings (Models HT- E4000 or above)
You can control your speaker system by your phone.
Sound mode, distance of each speaker and sound level(dB) can be changed.
- Remote Scheduler (Models BD-E8000 series, STB-E7000 series EU/Australia/New Zealand Only)
Recording TV shows through your TV when you're outside.
- Settings
You can fine-tune control for TV and BD by adjusting gesture sensitivity in your mobile device.
[How to set up]
1.Check if Wireless Remote Control or Network Remote Control is enabled in your TV’s System or Setup menu. If you don’t see either of them in the menu, Samsung Smart View App can’t be used in your mobile device.
2.Connect wireless/wired router to TV LAN port, or connect Samsung Wireless LAN adapter to TV USB port.
3.Connect your phone to wireless/wired router.

Thank you,, just what I wanted

Nokia7Vista said:
Thank you,, just what I wanted
Click to expand...
Click to collapse
Very glad I could help. Just wanted to share back...

Thanks...missed this app..al is working well also bluetooth is working fine to start en turn off tv
Verstuurd van mijn GT-I9300 met Tapatalk

What about the 3.2.1 version? Can anyone share it?

Thanks, i didnt even know such an app exists

Anyone? I cannot download it with the sgs3, but could be done with a sgs2. Please share the 3.2.1 version.

Hello,
I have an issue with the App. I can´t see, what there stands. The Display always turns on and off.
I´m using Omega v34.
Edit: I´ve connected it with TV. It is working fine. But the Display turn on and off issue still exists.

App is working with Omega v34. But for me only the remote control and the gaming control.
NO dual view and the other stuff. My TV is UE46C7700.
Screen off and on issue is after device reboot gone.

mikescorei said:
What about the 3.2.1 version? Can anyone share it?
Click to expand...
Click to collapse
mikescorei said:
Anyone? I cannot download it with the sgs3, but could be done with a sgs2. Please share the 3.2.1 version.
Click to expand...
Click to collapse
dcade said:
App is working with Omega v34. But for me only the remote control and the gaming control.
NO dual view and the other stuff. My TV is UE46C7700.
Screen off and on issue is after device reboot gone.
Click to expand...
Click to collapse
I can no longer access the new file on my old HD2, it no longer shows up. Tehrefore I can't post 3.2.1 but the viersions here work, and nothing major in 3.2.1 that would require an update and if you look online, it says nothing new. So while 3.2.1 may be nice to upgrade too, I can't see any requirement to do so, if the version you have works.
Just read teh comments on the 3.2.1 version of the app, looks like 3.2.1 doesn't work more than it works. Numerous comments about it breaking dual view, or issues with Flicker. So if 3.2.0 or 3.1.9 work for you, then stay with them
Dual View is only guarenteed to work on Samsung TouchWiz based ROM's. I have it working on both my GIII (Now ith Jelly Bean) and Galaxy Tab 10.1. Custom ROM's may not include all the components that are required to make this work. I doubt anything in 3.2.1 will change this, and make it work for some who aren't working now. Both the TV and the phone have to be compatible or you just get a very large file for a remote control.
Also in the main thread, see link in OP, there is an even earlier version for those to try who are having problems...

works great
bluetooth power on : (selected model tv only.. 7000 and 8000 series have this. others , wouldnt know)
first start app you would turn off bluetooth and wifi and let the app complain about the missing radio and quit app (clean memory in taskmanager to be sure)
now pair your tv > within 50cm reach of the TV (security feature)
turn off bluetooth
start app and wait for it to nag about missing bluetooth. turn on bluetooth with the prog and see in the popup if your tv is listed as paired. if not do the pairing again. (it needs a few tries sometimes) press back and now see if it shows your tv and press bluetooth power on icon and wait for the tv to respond and after that to connect to wifi and connect to your phone.. takes about 40 secs or so.
3.20 works best for s3 i9300 on stock rom
app requires DRM , decryption service and samsung movieplayer and offcourse a samsung build.prop
3.21 porting to s3 > not so easy, you may want to read a little more about the crappiness of it.
edit: using version 3.20 still works great with 4.1.2 luxemburg stock rom rooted with CMW philz touch, modded bootloader, led-mod and signed multiwindowmod, apex 2.4 pro launcher. BT power-on works. in multi-window with other app works. if u dont see controls in fullscreen turn off gesture control and or taskbar hiding or just press where the button supposed to be normally. version 3.22 from market doesnt work, only remotecontrol.

working on perfect on 4.1.2

I am paired but still doesn't show up to power on.

nygmam said:
I am paired but still doesn't show up to power on.
Click to expand...
Click to collapse
did you allow the app on tv ? and for older models turn on external control thing in tv menu.

da_jojo said:
did you allow the app on tv ? and for older models turn on external control thing in tv menu.
Click to expand...
Click to collapse
I have the 2011 PDP51D8000 Model TV, and have looked at all menu options, but still can't seem to get power on to work. Not a big deal, would be nice, but I can live without it. Just glad Dual view works flawlessly on both my SGS3 and Galaxy Tab 10.1.

Finally!
I've been looking a long time to get my remote back. Thanks a lot for this!
I can also confirm that this app works fine with Samsungs C8705.

Too bad i got a UE37ES5500 TV and it doesn't support this option.

It works on Galaxy S5
Tested and Working perfectly on Galaxy S5

Can't fint TV.
This app can't find my TV (C8705) any more and I'm using a Nexus 4 with Lollipop. I think it stopped working before I got Lollipop but I'm not sure. I've set a DMZ between my device and TV in my firewall, so that can not be the problem.
Any ideas?

LT28i ICS and Smartdock issue

Anyone with the Smartdock and running the LT28i version of ICS is your ion detecting the smartdock correctly in the Smart Connect (liveware) app? I even did a complete wipe and had it completely stock but Smart Connect will not detect the smartdock or a livedock. It sees when I have just the usb cable plugged in as being just the charger but neither dock is detected nor can I select either dock in the setup of Smart Connect.

Same, just get charging notification.

Hmm that's not good. Anyone else confirm it's not working?
Sent from my Sony Xperia™ ion

Same here.
Sent from my LT28at using xda app-developers app

My xperia ION LT28H works fine with live dock.
You must update the app on the market.
then, when the smartdock is connect via HDMI, the tv laucher start automatically.
You can also create a new profile called "smartdock" and select the app you want to lunch when there is no HDMI (clock for instance, like the xperia play).

cyberpic said:
My xperia ION LT28H works fine with live dock.
You must update the app on the market.
then, when the smartdock is connect via HDMI, the tv laucher start automatically.
You can also create a new profile called "smartdock" and select the app you want to lunch when there is no HDMI (clock for instance, like the xperia play).
Click to expand...
Click to collapse
We aren't talking about the lt28h firmware. I'm talking about the lt28i version of ics.
Sent from my Sony Xperia™ ion

any chance you can ask your boy at Sony why the international version isn't working with the smart dock? b/c i don't wanna switch to the at version + bloat ware for the smartdock (should i get one) just sayin....

killerskincanoe said:
any chance you can ask your boy at Sony why the international version isn't working with the smart dock? b/c i don't wanna switch to the at version + bloat ware for the smartdock (should i get one) just sayin....
Click to expand...
Click to collapse
Already did. He is passing it along. Also posted on the Sony mobile forums and have them looking at it.
Sent from my Sony Xperia S

Spectre51 said:
Already did. He is passing it along. Also posted on the Sony mobile forums and have them looking at it.
Sent from my Sony Xperia S
Click to expand...
Click to collapse
Just want to bump this and see if you got a reply.
I'm having this problem as well, but the circumstances are a bit different.
The stock LT28H firmware correctly detects the smartdock and rotates the screen as-is, as soon as I have it in the dock and it starts charging. After I update the smart connect software, it no longer acknowledges the dock unless it is connected to a TV via the HDMI output. Not sure if it's an intentional software change or a bug.

endGameXIII said:
Just want to bump this and see if you got a reply.
I'm having this problem as well, but the circumstances are a bit different.
The stock LT28H firmware correctly detects the smartdock and rotates the screen as-is, as soon as I have it in the dock and it starts charging. After I update the smart connect software, it no longer acknowledges the dock unless it is connected to a TV via the HDMI output. Not sure if it's an intentional software change or a bug.
Click to expand...
Click to collapse
What firmware are you on. It was working for me on the LT28h 3.7 firmware. Haven't heard anything from the dev at Sony but he was busy with CES so I will follow up shortly.
Sent from my Sony Xperia™ TL

Spectre51 said:
What firmware are you on. It was working for me on the LT28h 3.7 firmware. Haven't heard anything from the dev at Sony but he was busy with CES so I will follow up shortly.
Sent from my Sony Xperia™ TL
Click to expand...
Click to collapse
I'm currently on LT28H 3.7 as well. However, this has been happening for as long as I can remember having the phone. On every update I always wipe my phone, and the smart dock detection always works, as long as I don't update the Smart Connect software with the one from the market. As soon as I update it, the dock is only detectable if it's connected to a TV. So for now my only workaround is to not update the Smart Connect app.

endGameXIII said:
I'm currently on LT28H 3.7 as well. However, this has been happening for as long as I can remember having the phone. On every update I always wipe my phone, and the smart dock detection always works, as long as I don't update the Smart Connect software with the one from the market. As soon as I update it, the dock is only detectable if it's connected to a TV. So for now my only workaround is to not update the Smart Connect app.
Click to expand...
Click to collapse
ah ha. Nice catch. Okay so I just uninstalled the updates I had for Smart Connect and it rolled back to Liveware Manager and yep...smartdock works and is detected without HDMI being plugged in. Sending an email right now to my contact. Thanks for the info.

[Q] xperia s and hdmi connected to tv

hi to all and happy holidays
I bought a hdmi cable and I connected it to my Samsung Series 5 full HD tv,it connected and worked very well and fast,but in sony's web I show that it can work throw TV remote control but it doesn't work.I changed the TV to LG hd tv and still the remote it doesn't work.I checked the option on the phone for remote control.I'm using stock 4.1.2 jb .200.tv launcher is working but the remote no,does this work only on sony tv?or should I take any apps?
thnx

Some brand might support other brand...so,it depends...for eg. My grandpa LG tv can use skip,pause,play and stop function,but can't use the red green etc. Color button
Sent from my SK17i using xda premium

The TV needs HDMI CEC to work like that. Samsung for example calls it Anynet+
Sent From my LT26i using Tapatalk 4

Felimenta97 said:
The TV needs HDMI CEC to work like that. Samsung for example calls it Anynet+
Sent From my LT26i using Tapatalk 4
Click to expand...
Click to collapse
where can I search for this?
thnx a lot

tinial said:
where can I search for this?
thnx a lot
Click to expand...
Click to collapse
Look for your TV model, and search on the manual or in the internet if it have that

Hello.
My Xperia SL HDMI output used to work on stock room version 6.1.A.2.55 with my Sony TV (Bravia KDL-32M3000), a while ago I updated to 6.2.B.0.200 and I tough it was working right, but yesterday I plugged my phone to my TV and suddenly it was not working anymore today I made a factory reset and updated to 6.2.B.1.96 and still is not working. Then, just for testing, I made a downgrade to 6.1.A.2.55 via flash tool and the HDMI is still not working, finally I updated again to the latest firmware version (6.2.B.1.96) but nothing seems to work.
I plugged the cable on the TV, selected the right input, entered on the Service Menu of the phone, under Service test>TV-out test>TV-Out On>Get TV Out Status I see this:
Code:
Power Status:
Active mode
HDP Status:
H
RSEN Status:
N/A
TMDS Status:
On
HDCP Status:
On
CEC Status:
Source Active
TV-Output Type
HDMI
Device ID (Only for MHL)
N/A
On resolution/Frec I see this:
Code:
Resolution/Frec:
[email protected]
2D/3D Support:
2D
I tested different resolutions but none seems to work.
The TV just have a black screen on it, not even a "No signal" alert.
I haven't had a chance to test it on other TV since the problem appeared yesterday. A few weeks ago it was working on a friend's TV (also a Sony).
Any ideas?

By the way I already fixed this, it was because a bad cable
Sent from my LT26ii using xda app-developers app

[Q] Is my m8's IR blaster spoilt?

Have just gotten my M8
tried using the stock TV app first, didnt work... and it also doesn't "learn" from the other remote.
downloaded IR Universal Remote (which worked perfect on my S4 Active) and HTC Universal remote from the play store...
i do see the red beam flash ONCE only, but still doesnt turn on any device (tried a few diff TVs)
does anyone have an app or way to test this before i send it back for repairs?

None of the softwares remote profiles worked for me, I had to teach the app with the remote manually one button at the time to get it to work.

Worked fine for me, first try. Sony TV and Sony surround with an AT&T U-verse cable box. I only had to use the remote for it to learn from for 1, which worked first try. (All via their TV app on the phone)
I'm sure you're aware, but keep in mind the IR is in the power button itself. Good luck

Google smart ir remote. Best remote out there.
Sent from my HTC One_M8

tried that too but didnt work.
managed to get it working now after resetting the phone to defaults.!
Sent from my HTC One_M8 using Tapatalk

I'm facing the same problem here ... seems to be hardware issue

No problems here.

So ..OP did u send your phone for repair??
or solved the problem by yourself

[Q] Sixaxis with Tab S

Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!

maneetb said:
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
Click to expand...
Click to collapse
I tried all the tricks I know, to no avail, it's really hard to make it work, unless you're willing to do it 'oldschool' style, wired via OTG.
we managed to do this in samsung tab 3 before, 2 PS3 controllers for 2 player fighting games, dunno, seems like we have bluetooth compatibility issues as the PS3 bluetooth is already outdated.
let's here other chime in

what ? sixaxis controller works perfectly on my tab s 10.5 :v no issue . even with wire

Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app

better33 said:
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you dont need to install that app , just set the host IP for the controller and play . that's all

Well, like I said, didn't work until I tried that. Can't tell why though, never had too before. But I tried it since I remember a while ago, sense and touchwizz used to be not compatible with sixaxis app
Sent from my LG-D802 using XDA Premium 4 mobile app

screenshots...method...controller type?
sku|| said:
what ? sixaxis controller works perfectly on my tab s 10.5 :v no issue . even with wire
Click to expand...
Click to collapse
better33 said:
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok, wait...so are both of u guys saying that u have a PS3 controller working through BLUETOOTH with the tab S?! If so then could one of u please provide a screenshot as proof and describe your connection method...did u use the pc program or bond with an otg cable through the sixaxis app then pair and what version of the sixis app are u using? Also..are u using original oem sony controllers or ebay branded ones? :confused
:
@better33
to answer all of the basic questions...yes i'm rooted & yes i've used the app before successfully most recently on the tab pro 8.4 . i really need the above questions i posed to the poster above answered...also as @sku|| suggested i doubt if the compatibility checker helps but yes i've tried that too. Thx for the screenshot though...are u using original sony controllers and more importantly what version of the sixaxis app are u using?

Like I said, it wasn't working the first time, so I downloaded the compatibility checker since I remember there used to be issues with touchwizz, and it said it was compatible. I'm using the official ps3 controller. Are you root ?
Forgot to say, I connected the controller on my computer to change the master address and then connected it through Bluetooth
Sent from my SM-T700 using XDA Premium 4 mobile app

THEDEVIOUS1 said:
ok, wait...so are both of u guys saying that u have a PS3 controller working through BLUETOOTH with the tab S?! If so then could one of u please provide a screenshot as proof and describe your connection method...did u use the pc program or bond with an otg cable through the sixaxis app then pair and what version of the sixis app are u using? Also..are u using original oem sony controllers or ebay branded ones? :confused
:
@better33
to answer all of the basic questions...yes i'm rooted & yes i've used the app before successfully most recently on the tab pro 8.4 . i really need the above questions i posed to the poster above answered...also as @sku|| suggested i doubt if the compatibility checker helps but yes i've tried that too. Thx for the screenshot though...are u using original sony controllers and more importantly what version of the sixaxis app are u using?
Click to expand...
Click to collapse
I'm using the 0.7.4 version, what else do you need?

Hmm interesting. What rom version are you using? It could be regional issue?
---------- Post added at 12:55 AM ---------- Previous post was at 12:51 AM ----------
better33 said:
Like I said, it wasn't working the first time, so I downloaded the compatibility checker since I remember there used to be issues with touchwizz, and it said it was compatible. I'm using the official ps3 controller. Are you root ?
Forgot to say, I connected the controller on my computer to change the master address and then connected it through Bluetooth
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im using 2 official controllers here, one that came with the ps3 that I used on my tab 7.7 with no issues (bluetooth) . And another aftermarker pink controller that I also used with no issues with tab 7.7. Only thing devious and I have in common might be our custom rom which he compiled
I tried connecting it through PC and change the mac address via sixaxis changer. Installed the compatibility checker and eas advised that it's compatible. Bought the sixaxis app. And.. boom. Stuck at 'listening to controllers'. I'll give it a shot once again

maneetb said:
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
Click to expand...
Click to collapse
I'm having the same issue in my rooted Tab s 10.5. I changed the master to my tablet, then the tablet never sees the controller. Any luck?

Uhhh. Dunno what I did but.. it worked.
Heres what I remembered.
Uninstalled sixaxis.
Downloaded compatibility checker and run
-hooked up my controller via otg and manually typed my bluetooth MAC
Installed Sixaxis
-tried pairing via OTG. Disconnect cable and tried pairing via BT: unsuccessful
*frustrated*
Killed app compatibility checker
Killed app sixaxis
Reopened sixaxis
Clicked change IME - list of keyboard appeared. Tapped sixaxis
Clicked start. It connected.

Mine is :
1. Have a DS3 controller
2. Have a cable and OTG
3. Connect DS3 via OTG
4. Open sixaxis controller app ( v0.7.4)
5. Tap PAIR
6. Disconnect the controller
7. Change IME
8. Tap Start and connect with DS3
9. Done

ThE_SoUrCe said:
Clicked change IME - list of keyboard appeared. Tapped sixaxis
Clicked start. It connected.
Click to expand...
Click to collapse
Actually I remember doing that too (changing the IME BEFORE looking for devices), maybe that's why it worked for me. I'm on the last stock French rom, can't tell you more I'm at work without the tab.
Sent from my LG-D802 using XDA Premium 4 mobile app

I got it working on Tab S by changing IME to sixaxis > then go to "set up input methods" > made sure sixaxis is checked > into its general settings , checked auto start > then into game setting checking "enable gamepad. Presto!!

Hi everyone,
Thanks for all the feedback! I am trying very hard to replicate the steps, but I still can't get past the "Listening for controllers" status.
Can anyone please delete all of the six axis settings, and post detailed step by steps from scratch?
Also, I noticed my bluetooth button isn't lit up (indicating that it is on) when I start Sixaxis. And when I try to turn it on, it doesn't.
Thanks for your help!!

maneetb said:
Hi everyone,
Thanks for all the feedback! I am trying very hard to replicate the steps, but I still can't get past the "Listening for controllers" status.
Can anyone please delete all of the six axis settings, and post detailed step by steps from scratch?
Also, I noticed my bluetooth button isn't lit up (indicating that it is on) when I start Sixaxis. And when I try to turn it on, it doesn't.
Thanks for your help!!
Click to expand...
Click to collapse
Wait, you guys are right.... it is totally random, but I got it working! This time, I did retype the bluetooth address manually and clicked pair (even though it looked the same). Then, it still didn't work. Then I tried it with my regular swiftkey input, and it connected! Then I switched it to six axis.
This was the reason I bought the tablet, so THANK YOU guys for the help (even though we are still kind of puzzled )

I got another simpler method that works, so far so good,
-Force close all sixaxis apps (compatibility checker and sixaxis)
-at the back of the controller, there's a reset button, insert anything small enough and reset it
-connect the controller to your device via OTG
-run sixaxis controller app
-tap pair, then tap pair (the one on pop up)[ensure the bluetooth address is correct]
-disconnect OTG
-turn the controller on
-tap Start.
and there you have it.
edit:
and it will not work again as soon as you paired your device to your Samsung Gear LOL..
what you need to do, after using your Samsung Gear, disconnect it, reboot your device and follow the instructions above, it will sync once again

ThE_SoUrCe said:
I got another simpler method that works, so far so good,
-Force close all sixaxis apps (compatibility checker and sixaxis)
-at the back of the controller, there's a reset button, insert anything small enough and reset it
-connect the controller to your device via OTG
-run sixaxis controller app
-tap pair, then tap pair (the one on pop up)[ensure the bluetooth address is correct]
-disconnect OTG
-turn the controller on
-tap Start.
and there you have it.
edit:
and it will not work again as soon as you paired your device to your Samsung Gear LOL..
what you need to do, after using your Samsung Gear, disconnect it, reboot your device and follow the instructions above, it will sync once again
Click to expand...
Click to collapse
I got it working perfectly yesterday, but couldn't get it today. I tried your steps over and over again, but no luck!
Any way you can post a video? I will be very thankful to the person who can get this working for me! It is frustrating that it worked yesterday flawlessly with two controllers, but only after hours of messing with it (and it isn't working today!)

maneetb said:
I got it working perfectly yesterday, but couldn't get it today. I tried your steps over and over again, but no luck!
Any way you can post a video? I will be very thankful to the person who can get this working for me! It is frustrating that it worked yesterday flawlessly with two controllers, but only after hours of messing with it (and it isn't working today!)
Click to expand...
Click to collapse
I was about to edit my post for the nth time LOl. Sad to say. I does not work again. I was simply lucky that I managed to do it 3 times in a row. Now. It simply doesnt pair. Could be something messing with the bluetooth becuase once you get it to pair initially. Even if you reboot, it would still pair. But once you connect your device to another bluetooth device such as headset/gear. BT will forget the sixaxis profile and you'll have trouble syncing it again. I'm close to giving up. I'm simply using it with USB OTG just to satisfy my game-cravings. Hope the others who got it working chime in once again if they manage to pair it all the time.