I had bought the official grey bumper case only to ask for a refund a couple of days in as the case started staining almost immediately. I was given a quick refund and told to keep the case anyway.
Since it was now free and I don't like grubby, I thought I would experiment.I bought some Rit dye from eBay for £3 and dyed the case a darker grey. The case started turning navy pretty quickly but the lip of the case took a long time in the dunk tank to take the dye properly (must be slightly different material to be more flexible when fitting the case) so ultimately the case finished up a dark charcoal grey, almost black but not quite. It is actually very nice. I might put up some photos...but if anyone is in the same boat and curious, the official bumper can be dyed, it just takes 2-3 hours in Rit dye.
nice to know waiting for photos
Scratch!
Next time try to scratch the surface with very fine sandpaper, 2000 points and above. The paint will apply a lot easier!
thetonyclifton said:
I had bought the official grey bumper case only to ask for a refund a couple of days in as the case started staining almost immediately. I was given a quick refund and told to keep the case anyway.
Since it was now free and I don't like grubby, I thought I would experiment.I bought some Rit dye from eBay for £3 and dyed the case a darker grey. The case started turning navy pretty quickly but the lip of the case took a long time in the dunk tank to take the dye properly (must be slightly different material to be more flexible when fitting the case) so ultimately the case finished up a dark charcoal grey, almost black but not quite. It is actually very nice. I might put up some photos...but if anyone is in the same boat and curious, the official bumper can be dyed, it just takes 2-3 hours in Rit dye.
Click to expand...
Click to collapse
I'm interested in seeing how it looks like. I have a crapped out yellow official case at the moment that I'm considering dying.
What color Rit dye did you use? Black? I'd like to see some pics.
Related
When i bought my HTC One Stealth Black, i made sure that i got a perfect model (no defects). I took about an hour in the shop examining all the black HTC One's (they agreed to open 3 boxes for me) before i finally made up my mind. I paid for my phone off-contract and went home perfectly happy with a 801e model (it also has a sticker on the side of the phone that says UKR and on the box as well, so i guess it's from Ukraine and i got a 3-pin power adapter in the box together with the standard 2-pin charger plug) and also got a free TPU case with screen protector, as gift from the shop. Well, i put my phone in the TPU case as soon as i got home for fear of any drops/bumps/scratches, put it in my jeans pocket and went through the rest of my day moving around. Later that afternoon, i pulled the phone out of its case to touch the cold aluminium back and to my horror, i found a scratch (there were no scratches whatsoever before) that matched the contour of the TPU case around the camera. The scratch is around the flash.
Conclusion: The cheap unbranded TPU case seemed to fit the phone snugly but apparently not, as the constant movement and rubbing of the phone within the TPU case from inside my jeans pocket had caused the sharp edge of the TPU case to slowly erode the paint coating. It's a good thing that i noticed it after only one day usage or the etching would have definitely gone deeper, possibly even exposing the aluminium colour after a couple of days. It says "nothing but the best" on the packaging of the unbranded case, which is ironic.
So, my advice (and the reason for my endless rant in this post): stay away from cheap TPU cases, even if it says TPU, which might be true about the material itself but the fact of the matter - without a tight fit of the phone inside the casing, the resulting inside friction between the phone and its casing will damage your phone, causing the paint to wear off. This is probably not applicable to those of you who chose/use the Glacial Silver HTC One, since any scratch will probably not show up. But with time, the constant friction might cause the scratch to become visible. I've attached pictures so you can understand why i'm *****ing about my One By the way, i apologize for my dirty camera lens.
Lesson learnt - i've already ordered 3 casings (the best i could find after hours of searching, for cases that offer a balance between compactness v/s protection); Cimo Grip Back Case Flexible TPU Black, Otterbox Commuter Black and UAG Aero. I wouldn't bother with any other cases, unless you want even more protection, then you should be satisfied with the Otterbox Defender case.
My friend .. ANY case you put on the phone has the potential to scratch the aluminum on the edges. It is simple physics: if you get some dust/sand in between the case and the aluminum (where in other locations can the dust/sand/lint settle ?) any slight pressure or movement of the case will cause a small surface defect. You can not hide from that and you can not prevent that.
Live with it ! It is called reality.
electronical said:
When i bought my HTC One Stealth Black, i made sure that i got a perfect model (no defects). I took about an hour in the shop examining all the black HTC One's (they agreed to open 3 boxes for me) before i finally made up my mind. I paid for my phone off-contract and went home perfectly happy with a 801e model (it also has a sticker on the side of the phone that says UKR and on the box as well, so i guess it's from Ukraine and i got a 3-pin power adapter in the box together with the standard 2-pin charger plug) and also got a free TPU case with screen protector, as gift from the shop. Well, i put my phone in the TPU case as soon as i got home for fear of any drops/bumps/scratches, put it in my jeans pocket and went through the rest of my day moving around. Later that afternoon, i pulled the phone out of its case to touch the cold aluminium back and to my horror, i found a scratch (there were no scratches whatsoever before) that matched the contour of the TPU case around the camera. The scratch is around the flash.
Conclusion: The cheap unbranded TPU case seemed to fit the phone snugly but apparently not, as the constant movement and rubbing of the phone within the TPU case from inside my jeans pocket had caused the sharp edge of the TPU case to slowly erode the paint coating. It's a good thing that i noticed it after only one day usage or the etching would have definitely gone deeper, possibly even exposing the aluminium colour after a couple of days. It says "nothing but the best" on the packaging of the unbranded case, which is ironic.
So, my advice (and the reason for my endless rant in this post): stay away from cheap TPU cases, even if it says TPU, which might be true about the material itself but the fact of the matter - without a tight fit of the phone inside the casing, the resulting inside friction between the phone and its casing will damage your phone, causing the paint to wear off. This is probably not applicable to those of you who chose/use the Glacial Silver HTC One, since any scratch will probably not show up. But with time, the constant friction might cause the scratch to become visible. I've attached pictures so you can understand why i'm *****ing about my One By the way, i apologize for my dirty camera lens.
Lesson learnt - i've already ordered 3 casings (the best i could find after hours of searching, for cases that offer a balance between compactness v/s protection); Cimo Grip Back Case Flexible TPU Black, Otterbox Commuter Black and UAG Aero. I wouldn't bother with any other cases, unless you want even more protection, then you should be satisfied with the Otterbox Defender case.
Click to expand...
Click to collapse
I had the black for a while. I think that it is prone to anything. Apart from light scratches sustained by using the double dip case, the camera cut out of an incipio case left a watermark on it as well. Now using a silver one and not a single scratch. Rotating between three cases.
Forgive me if I'm wrong, but isn't anodized AL WAY harder than TPU?
If it is, then isn't it PHYSICALLY IMPOSSIBLE for the case itself to scratch the phone?
Either a) there was dust/dirt in the case or
b) it's not a scratch, try wiping it with mild soap, water and a soft cloth.
Interesting thread...you were writing this 3 years ago, I just picked up two pristine condition used m7s, both with nearly all day batteries. Yesterday I got two cases of the first type described below.
I just love these phones so much. They are such a huge upgrade from any phone I have had since I had a droid 2 from motorola before knowing anything at all about these nifty little computers.
I just came in here to say that I will be getting the hard glass protection from now on for every phone I get. Would also recommend to anyone as it is far superior to foils.
Also three good types of cases:
- the hardened shell with no button coverage, and brushed metal exterior
- the clear plastic back, black bumpered semi hard with plugs and accurately designed button enhancers (distinguished by black surface lines on the back coming in from upper and lower edges about a cm each, towards the antennas)
-and believe it or not I really liked the ordinary rubber sort of cases with wavy line down the back and dual texture... as long as they have button covers. But those wouldnt be good for people who have a hard time with the buttons already.
Just picking up these phones starting in June 2016...has made my android experience so much more enjoyable...now being able to play top 3d heavy performance requiring games...and so much different development for the phones.
here's a couple pics of my phone cases I was describing. no scratches whatsoever on the two used like new phones, although its a used case on goldy. the other phones are for family and such, but also loving the cases on them. red looks good in red but it obscures the back... so take clear
kruc Ire said:
here's a couple pics of my phone cases I was describing. no scratches whatsoever on the two used like new phones, although its a used case on goldy. the other phones are for family and such, but also loving the cases on them. red looks good in red but it obscures the back... so take clear
Click to expand...
Click to collapse
Link please?
Saf98 said:
Link please?
Click to expand...
Click to collapse
www.urbandictionary.com/define.php?term=spinner
I picked up a white one of these:
http://www.ebay.com.au/itm/For-LG-G.../221311296509?ssPageName=ADME:L:eek:C:AU:3160
It has a matte translucent finish, and the case is hard, not TPU. I prefer translucent to clear as it doesn't show all the dust and crap that inevitably builds between the phone and the case. It fits perfectly and the buttons are easily accessible. I like that you can still see the rear logo and the case isn't physically obtrusive at all. The gap between screen and front bezel is just over 1mm. Worth the buy, especially for $5. I dropped it 20 minutes ago on a tile floor from about 1m up, no physical change. Can't tell if it landed on a front or back corner as there are no marks. Paid for itself 100 times over.
Photos here:
http://imgur.com/a/pMFZI
I have had one of these for a bit over a week and it's cracking all over the place where I tend to hold my phone. Not from drops, just the stress of holding the phone. :-/
thejonesyboy said:
I picked up a white one of these:
http://www.ebay.com.au/itm/For-LG-G.../221311296509?ssPageName=ADME:L:eek:C:AU:3160
It has a matte translucent finish, and the case is hard, not TPU. I prefer translucent to clear as it doesn't show all the dust and crap that inevitably builds between the phone and the case. It fits perfectly and the buttons are easily accessible. I like that you can still see the rear logo and the case isn't physically obtrusive at all. The gap between screen and front bezel is just over 1mm. Worth the buy, especially for $5. I dropped it 20 minutes ago on a tile floor from about 1m up, no physical change. Can't tell if it landed on a front or back corner as there are no marks. Paid for itself 100 times over.
Photos here:
http://imgur.com/a/pMFZI
Click to expand...
Click to collapse
I ordered a quicksand case from the same seller so it's good to know you got your case. How long did the shipping take I wonder?
Jaxidian said:
I have had one of these for a bit over a week and it's cracking all over the place where I tend to hold my phone. Not from drops, just the stress of holding the phone. :-/
Click to expand...
Click to collapse
Mine's flexible enough not to crack, even if I try to flex it, even at the corners. It fits nicely and isn't stretching to hold the phone at all. You might have a different model?
bblzd said:
I ordered a quicksand case from the same seller so it's good to know you got your case. How long did the shipping take I wonder?
Click to expand...
Click to collapse
About two weeks to Australia.
belt clip case for N5
I have also ordered one Amzer belt clip case for my N5 from a reseller site Fommy...just waitng for it to be delivered..and will surely put up the pics and reviews of the case....as I have also used the cases earlier also of this brand and they were quite sturdy and sustainable one...so considering the past experience I ordered one for my N5 too....so hoping that it wont let me go down.....
I have a similar case only in solid white. Not even a week of use and it is showing signs of coloration..
pic : http://imgur.com/jDgNmCM
stickyness
does this case stick in your pocket?
I find that really annoying with manny cases :-/
thejonesyboy said:
I picked up a white one of these:
http://www.ebay.com.au/itm/For-LG-G.../221311296509?ssPageName=ADME:L:eek:C:AU:3160
It has a matte translucent finish, and the case is hard, not TPU. I prefer translucent to clear as it doesn't show all the dust and crap that inevitably builds between the phone and the case. It fits perfectly and the buttons are easily accessible. I like that you can still see the rear logo and the case isn't physically obtrusive at all. The gap between screen and front bezel is just over 1mm. Worth the buy, especially for $5. I dropped it 20 minutes ago on a tile floor from about 1m up, no physical change. Can't tell if it landed on a front or back corner as there are no marks. Paid for itself 100 times over.
Photos here:
http://imgur.com/a/pMFZI
Click to expand...
Click to collapse
Hey did you use the screen protector that came along with it?
Thanks for the detailed pictures. I ordered the white one, too, based on the excellent details you provided here.
Cheers
Thanks for the review. There are also some very similar cases made by Bear Motion on Amazon, might even be same case? idk here for matte smooth and here for sand
I bought a grey bumper and had to get a refund as it started to tarnish inside just a few hours.
So my question is, was my grey case faulty or do all of the grey cases smudge up quickly on the corners? Do any of the other colours do the same? Is black the only long term option? I have looked at other cases and even tried some but so far the bumper seems the best fit and finish and while it doesn't keep the factory shape, it does look and feel the most OEM to me.
So....
What colour bumper did you buy?
How long have you had it?
Has it tarnished at the corners showing dirt/wear?
thetonyclifton said:
I bought a grey bumper and had to get a refund as it started to tarnish inside just a few hours.
So my question is, was my grey case faulty or do all of the grey cases smudge up quickly on the corners? Do any of the other colours do the same? Is black the only long term option? I have looked at other cases and even tried some but so far the bumper seems the best fit and finish and while it doesn't keep the factory shape, it does look and feel the most OEM to me.
So....
What colour bumper did you buy?
How long have you had it?
Has it tarnished at the corners showing dirt/wear?
Click to expand...
Click to collapse
All but the black stain. The black isn't that great because the coating peels off.
I owned a gray bumper. I threw the gray bumper in the trash after my black Ebay Quicksand case for $1 came in.
How is the fit of the cheap cases? I like the fit and feel of the bumper but not at the expense of tarnishing or peeling. I got a refund for my grey bumper but got to keep it so I might try and dye it and see what happens.
Sent from my Nexus 5 using XDA Premium 4 mobile app
New owner here:
Read the reviews and knew the glass back isn't exactly a problem but I would prefer something more textured like some other phones - even faux leather even.
I'm currently using the adhesive back that came with my phone and it's not bad but wondering what else other owners are using.
Thank you.
You can find a plenty of "Carbon Fiber" skins around. I had one on my previous phone and made it feel really good.
Alternatively, check this site out: https://dbrand.com/shop/xperia-z3-compact
The page speaks for itself, but there's leather. I can't tell you how the site is because I've never bought from them, and I can't say if the leather is real or not. You'll have to look around to see other people's opinions on that.
Gave you a stepping stone at least.
Bought from them twice.
Shipping is very slow since you pay less than 2$ of shipping fee.
As said, the cut is really precise, and repositionnnable if necessary.
I have the "carbon" one and it looks great. Almost like real carbon fiber.
It's textured and resistant to scratch. Don't expect the phone to be less slippery however.
Bought the metal skin for my Ps4 and it looks great on the console, not on the controller.
Looks like real brushed aluminum.
Recommended
Slickwraps
Slickwraps has skin for front, back and sides for a complete skinned look. Got black leather on white.
avinandaspid said:
Slickwraps has skin for front, back and sides for a complete skinned look. Got black leather on white.
Click to expand...
Click to collapse
What about the texture?
And is it possible to use a tempered glass screen protector with the front skin?
I am also looking for a away to make the phone less slippery without a case (I have tried several cases, they all suck more or less).
Never again shall I buy a phone this slippery, it really is annoying how it handles with one hand.
Glass is less slippery if you have sweaty hands. Your fingers , long or short, rest on the side of the phone which is plastic, the skin does help on that area.
If you want real leather, check COLORS
Yes you can use tempered, but tempered has to be placed before the skin.
I'm giving dbrand a try. I've always used slickwraps but I don't see the point of paying for an entire skin and not using it.
Dbrand has sale today also. 25% off!
Only fully body white case on the market is the Rhinoshield solidsuit. Everything else white are minimalist hard shell cases.
Took my old Spigen liquid clear tpu case and spray painted it white. Turned out way better than I thought.
https://imgur.com/a/M5jlxLx
Momotani-Hitoshi said:
Only fully body white case on the market is the Rhinoshield solidsuit. Everything else white are minimalist hard shell cases.
Took my old Spigen liquid clear tpu case and spray painted it white. Turned out way better than I thought.
https://imgur.com/a/M5jlxLx
Click to expand...
Click to collapse
I did a simple google search and came up with a bunch of them, not sure what you're talking about:
https://www.google.com/search?q=white+bodyshield+cases+pixel+3+xl
You can even get one with built in lights:
https://lumee.com/products/lumee-duo-google-pixel-3xl-case
sanjsrik said:
I did a simple google search and came up with a bunch of them, not sure what you're talking about:
https://www.google.com/search?q=white+bodyshield+cases+pixel+3+xl
You can even get one with built in lights:
https://lumee.com/products/lumee-duo-google-pixel-3xl-case
Click to expand...
Click to collapse
https://lumee.com/products/lumee-duo-google-pixel-3xl-case
Not exactly white, more like marble, and really $70 USD?
https://www.google.com/search?q=white+bodyshield+cases+pixel+3+xl
first product search result link is not white. It is transparent case with white flower artwork
2nd result hit Not really white. They are black case with printed decals slapped on the back
skim through more search hits, there are very few if not only 1-2. Wouldn't call that a "bunch". I've done the search many times, there are not many to out there on the market for pixel 3 xl. I've searched through amazon, ebay, aliexpress.
Challenge you to link me 5-10 on amazon.com that is full body pure white like the Rhinoshield solid suit . They are like the only one readily available. Peelcase has a kind of white one made of recycled stuff, but not really true white. Looks like recycled paper.
As a white-case connoisseur, my educated guess, after owning a billion of them for a billion phones, is I suspect they're not the favorite to produce for manufactures. Rubber and TPU, favorite materials for phone cases, stain VERY easily, and white ones turn irreversibly blue from blue jeans after only a couple days. They probably get a lot of customer complaints/returns. I pretty much gave up on finding nice solid-white cases. Either they stain RAPIDLY, or are made of very hard materials which are either bulky as hell or thin with terrible coverage (insufficient lip to set the phone face down without the screen touching the surface).
Otterbox is the one!!!
itiskonrad said:
As a white-case connoisseur, my educated guess, after owning a billion of them for a billion phones, is I suspect they're not the favorite to produce for manufactures. Rubber and TPU, favorite materials for phone cases, stain VERY easily, and white ones turn irreversibly blue from blue jeans after only a couple days. They probably get a lot of customer complaints/returns. I pretty much gave up on finding nice solid-white cases. Either they stain RAPIDLY, or are made of very hard materials which are either bulky as hell or thin with terrible coverage (insufficient lip to set the phone face down without the screen touching the surface).
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B07R28S854
Found one. I like it so far. We will see how easily it discolors or stain. https://imgur.com/a/AHRt4VC
Momotani-Hitoshi said:
https://www.amazon.com/gp/product/B07R28S854
Found one. I like it so far. We will see how easily it discolors or stain. https://imgur.com/a/AHRt4VC
Click to expand...
Click to collapse
Does if feel "sticky" like some silicon cases do? Is there a good lip preventing the screen from touching a surface?
TIA
mgp53 said:
Does if feel "sticky" like some silicon cases do? Is there a good lip preventing the screen from touching a surface?
TIA
Click to expand...
Click to collapse
It isn't sticky. Actually kind of slippery. Feels more like a soft touch plastic. Lip is minimal. Description says 1.2mm, but if you put a TGSP it might be flush.
Momotani-Hitoshi said:
It isn't sticky. Actually kind of slippery. Feels more like a soft touch plastic. Lip is minimal. Description says 1.2mm, but if you put a TGSP it might be flush.
Click to expand...
Click to collapse
Thanks, the wife really prefers a white case. Still looking too.
mgp53 said:
Thanks, the wife really prefers a white case. Still looking too.
Click to expand...
Click to collapse
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183531573765
It's not full body had a opening at the bottom but pretty dam close and good looking
razrlover said:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183531573765
It's not full body had a opening at the bottom but pretty dam close and good looking
Click to expand...
Click to collapse
those are half price on Ali, and the bottom opening has always been sharp for me. to be fair, i haven't used one since probably the og pixel, but I'd had may previously and they all were sharp against my pinky
These cases are amazing, and the protection is good, consider buying a better screen protector though, you get a free one, and you can tell its free, but its good until you can buy more expensive screen protector. Not white though, but i bet there will be.
https://www.mobilefun.co.uk/by-brand/zizo
There was a great Speck brand case few years ago, for like the iPhone 7 or something, it was White, with black little corners, looked super cool, but never saw it again for any other phone.
https://www.speckproducts.com/apple...olor=799865728&cgidmaster=sptyp-st850#start=5
I would like this for my Pixel 3 XL