Develop Bugs

Looking for some input with modding d3o & powerskin

Ok everyone this will be my first mod-accessory, for a mobile device and i am looking for some input. I want the best of both of these two cases and am pretty sure that the end result will be some kick arsenic case loved by most people. Check my video out it says all I am trying to do. http://youtu.be/DZOKjY2YMzg

Fix your audio, get prepared, get to the point and try again. Oh and gorilla glue? Couldn't tell what you wanted to use it for, but not a good idea. It expands.

Kerns_JW said:
Fix your audio, get prepared, get to the point and try again. Oh and gorilla glue? Couldn't tell what you wanted to use it for, but not a good idea. It expands.
Click to expand...
Click to collapse
I am wanting some input on how to go about using the inner top portion on the power-skin replacing the same area on the powerskin with the d3o portion. I know gorilla glue expands but nothing a razor blade can't fix after it cures.

Too many ideas, can you narrow it down?
Hard plastic kept or not?
Can hard plastic be removed if needed?
Room under the top section for an additional layer? Snug or decent room
Let's talk glue again. Wouldn't something that remains flexible be preferred?

Kerns_JW said:
Too many ideas, can you narrow it down?
Hard plastic kept or not?
Can hard plastic be removed if needed?
Room under the top section for an additional layer? Snug or decent room
Let's talk glue again. Wouldn't something that remains flexible be preferred?
Click to expand...
Click to collapse
Yeah I was thinking about losing the hard white plastic of the d3o and using the inner flexible black part. Right about the glue now that I think about it, will need some flexibility-any ideas on type of adhesive? I am thinking with the addition of the inner layer and losing the back phone coverage it will be comfortable in fit.
Sent from SGS II 4G Jelly Bean 4.1.1

okay
Cut off half of old and put on top of newer one. Issue looks dumb and unfinished. Use some type of cord to clean up the edge. Still may look bad and by removing hard plastic look nasty due to glue remains. Due to shown cracks, it's not likely you can use as hard case on top of new rubber.
Under newer one instead. Issue, it would look and feel off I think because of hump added. Maybe not sure due to hump caused by battery? Could be similar.
Fix cut old one slightly bigger than new hole. Glue edges only. Issue bump created around current lip from New hole.
Fix cut same size as new hole add inner layer such as felt. Glue piece to felt, felt to new inside part. If cut well and placed well, old piece fills void reduces lip. Issue of bad cut, looks bad. Cut slightly larger than hole and slowly trim to fit. Try to get edges to squash well together. Still may have nasty glue remains from removal of hard plastic. Fix may be tough to do and look off. Keep plastic attached, Trim both plastic and rubber to shape of hole and fit in hole. Use felt again as backer.
Eliminate felt use, trim plastic to hole, trim rubber slightly bigger. Glue old rubber to plastic and edges of old rubber to inside of new hole. Essentially, use old rubber as backer instead of felt. May still cause that hump around edge of new hole.
Fill hole with old piece as described above eliminate felt use, plastic if desired, and over size of old rubber. Create complete new back instead to glue piece to. Then glue this new back to the back of new case. This will cover up the old glue remains, bad possible cutting and lip issues. Tricky part, what to use for new back.
What's the inside of old case look like? Could it be used to create new back layer? If not sure where I am going, look at the back of a ballistic case.
Glue depends on decided application. If new back than semi rigid glue would work well. They have super glue that stays flexible. Rubber cement too flexible I think.

What would you suggest be my line of going forward? Cut the lip and buttons off the d3o
Sent from SGS II 4G Jelly Bean 4.1.1

Tough to say without being there and knowing the actual layout. Your video just made it to hard to see. Since the plastic is borked and underneath may be glued, you may want to hit up one of the mall vestibules and see if you can find some knock off cover that works to your needs.

Yeah I will probably grab some cheap cases similar & do some mock ups to get a feel for what it will be like. I'll post some pictures of my progress.
Sent from SGS II 4G Jelly Bean 4.1.1

[Q] Putting tape on chrome bezel

Hey guys, i was wondering if any of you put tape on the chrome bezel before putting on cases to prevent scratches. I tried this before and it seemed to work good, but i've never seen it being mentioned in any threads.
Another reason I'm asking is because I'm thinking of ordering a hybrid case (from this thread: T-Mobile Galaxy S2 T989 Hybrid case - $8! GREAT!!)that's supposedly somewhat of a loose fit. I was planning on putting double sided tape on the bezel to make the silicone part stick right onto the bezel to fix that problem.
Any thoughts/opinions would be appreciated!
Thanks guys!

Putting tape on the bezel is a good idea to prevent scratches, however, there's a chance of the adhesive becoming lose over time (especially with the warmth coming from the hand). Thus, it would also leave that sticky tape residue.
I haven't tried the case you have mentioned, but I think putting double sided tape isn't necessary. Tape will be a decent temporary fix, however, I don't think it will be strong enough to have the silicone stay in place (especially if the adhesive gets warm and loosens up as mentioned before). The case should be fine even without the tape, but you won't lose much from trying.
If you are really set on getting that case and you are looking for something that would prevent scratches on the bezel. Another alternative to tape I would recommend is this body skin. Bestskinsever is currently having a sale, just recently ordered one for myself. It will have a better aesthetic on the phone and at least not leave any adhesive residue.
Hope my feedback helps

I have the case. Its not really a loose fit because the hard part of the case holds the softer, rubber part of it into place, and its not really needed.

*****Best Bumper*****

Hey Guys, just a quick question.
You know how their those aluminium bumper and then there's this sgp ones. Well I was just wondering if someone can answer these questions for me.
1. Say for instance i dropped my s3 and it happened to land on its screen would the bumper ( sgp and Metal) prevent the phone from cracking, better than the standard jelly case on ebay?
2. Which bumper would prevent the crack more. the metal or the sqp?
3. is it worth getting a metal bumper or a sqp one?
4. What is the deference between a jelly case, metal bumper and sqp bumper.
**********LINKS**********
METAL BUMPER http://www.ebay.com.au/itm/Aluminum...&var&hash=item565071e19e&_uhb=1#ht_983wt_1190
JELLY CASE THING http://www.spigen.com/cell-phone/samsung/galaxy-s3/samsung-galaxy-s3-case-modello-series.html
BUMPER http://www.spigen.com/cell-phone/sa...-galaxy-s3-case-ultra-bumper-lumi-series.html

not sure about the other 2, but the metal bumper won't help much. it doesn't even lift the camera lens off the surface.
it also has little to no padding, if you can call a few strips of tape around the inside as paddings...
Sent from my GT-I9300 using xda app-developers app

A lot of people cite no padding as the reason to not have metal bumpers. But, these bumpers do, in fact, protect your phone. The real value in having a solid metal bumper is to distribute the force of impact over a wider surface area, therefore lessening the likelihood of damage.
So yes, metal bumpers do protect.

Are You Sure
yeah so the metal bumper would be more ideal? Just thinking if its metal wouldn't create more of a shock than the sqp cause it is metal?

It's hard to say what bumper can absorb greater impact without a controlled lab test.
Keep in mind our phones do not have any moving parts, so the only real impact you have to worry about is the point at which the material breaks or the joined parts separate.
Personally, I think the difference in protection is negligible, and would worry more about the reception problems associated with metal bumpers.

I guess you would wrap a Ferrari with a case too

i'll only buy a metal case ONLY IF the inside is rubberized to absorb the shock when it falls.

tom.revelly46 said:
Hey Guys, just a quick question.
You know how their those aluminium bumper and then there's this sgp ones. Well I was just wondering if someone can answer these questions for me.
1. Say for instance i dropped my s3 and it happened to land on its screen would the bumper ( sgp and Metal) prevent the phone from cracking, better than the standard jelly case on ebay?
2. Which bumper would prevent the crack more. the metal or the sqp?
3. is it worth getting a metal bumper or a sqp one?
4. What is the deference between a jelly case, metal bumper and sqp bumper.
**********LINKS**********
METAL BUMPER http://www.ebay.com.au/itm/Aluminum...&var&hash=item565071e19e&_uhb=1#ht_983wt_1190
JELLY CASE THING http://www.spigen.com/cell-phone/samsung/galaxy-s3/samsung-galaxy-s3-case-modello-series.html
BUMPER http://www.spigen.com/cell-phone/sa...-galaxy-s3-case-ultra-bumper-lumi-series.html
Click to expand...
Click to collapse
1. If you drop it on the screen and there is something there, there isn't anything that will prevent it from cracking better than anything.
2. None.
3. SGP does not effect reception. Aluminum bumpers do.
4. /thread.

MisterTedster said:
A lot of people cite no padding as the reason to not have metal bumpers. But, these bumpers do, in fact, protect your phone. The real value in having a solid metal bumper is to distribute the force of impact over a wider surface area, therefore lessening the likelihood of damage.
So yes, metal bumpers do protect.
Click to expand...
Click to collapse
I'm not sure there's a whole lot of impact dissipation when it comes to a solid material, though. Pretty sure that's the main reason why cases like the Otterbox and such still use a soft silicon layer, aside from in-hand comfort. ESPECIALLY when just about every metal bumper i've seen has almost nothing separating the phone itself from the metal bumper aside from what looks like slightly thicker than average tape.

I have that exact same bumper as linked in the OP from ebay and I can tell you straight up that it has a few bits of tape and the back part of the bumper doesn't even lift the camera lens off the surface. The power and volume buttons are stupidly hard to press (you can only press them from the back) and the headphone port is narrow enough to the point that you would need a real skinny aux cable.
I don't think it even comes close to protecting anything. it looks kinda unique but that's about as far as it goes.
those little tapes are there so that the metal doesn't scratch the phone's edges, that's it.

I've dropped my phone several times with my metal bumper from 2 foot up to about 4 foot and it's survived every time. I did take my bumper off for a while and accidentally dropped it from about 2 foot and the screen broke lol.
The only issue with the metal bumper is the loss of reception. I get about 10% less reception than when I have no bumper on. I do get GPS perfectly fine, same with wifi and NFC(obviously as the case only covers the sides not the back).

tom.revelly46 said:
Hey Guys, just a quick question.
You know how their those aluminium bumper and then there's this sgp ones. Well I was just wondering if someone can answer these questions for me.
1. Say for instance i dropped my s3 and it happened to land on its screen would the bumper ( sgp and Metal) prevent the phone from cracking, better than the standard jelly case on ebay?
2. Which bumper would prevent the crack more. the metal or the sqp?
3. is it worth getting a metal bumper or a sqp one?
4. What is the deference between a jelly case, metal bumper and sqp bumper.
**********LINKS**********
METAL BUMPER http://www.ebay.com.au/itm/Aluminum...&var&hash=item565071e19e&_uhb=1#ht_983wt_1190
JELLY CASE THING http://www.spigen.com/cell-phone/samsung/galaxy-s3/samsung-galaxy-s3-case-modello-series.html
BUMPER http://www.spigen.com/cell-phone/sa...-galaxy-s3-case-ultra-bumper-lumi-series.html
Click to expand...
Click to collapse
why is this thread named "*****Best Bumper*****" and then for metal bumper, a lesser version is listed? if you want the best, you gotta raise that price, and go DRACO. (unless you want to name this *****SOME Bumpers For people that don't want to spend much*****)

Metal band: don't be fooled, it's mostly plastic. Here's an alternative.

Hope people do realise that the metal band is really just plastic with a (cheap) metal strap.
Knowing this, I guess it's probably smarter to just buy one of these adapters and find some quality 24mm bands you can fit yourself. I too was searching for Sony's metal band, but after seeing that the part that holds the screen is just made out of painted plastic, I'm glad I didn't buy one yet. It saved me from being very disappointed...

Sorry but this is not true. An element with which you write, that it is made of plastic, rubber and metal. The rubber is combined with plastic (directly to the metal it can not be combined). Rubber is used to close the core mounting in the cover. Then the cover is protected on both sides of the metal finish.

I saw the 3D printed models in another thread, they are a really poor quality and awful fit and finish, unless they've improved since I last looked at them.
Still the metal band is almost impossible to get hold of anyway, but genuine adapters have started to pop up on eBay
Sent from my P9000 using Tapatalk

The metal tape is very heavy and looks good.
But the part that holds the screen is painted.
I have a small scratch in it, because I didn't know it.
I use the metal tape only to special occasions.

Does anyone have the pasonomi case?

https://www.amazon.com/gp/aw/d/B01F...0+pasonomi&dpPl=1&dpID=51wuOYiWWML&ref=plSrch
I've been looking at this case, but it seems that the inside of it is just plastic and I'd be concerned about plastic cases scuffing up the metal, since all the cases I've had for my phone's for years have had rubber inside layers. Does anyone have this case that can comment on this and it's quality?

I have the silver version. The interior is plastic, indeed, but the contact points are rubber. There is no direct plastic to aluminum connection.
However, the finishing of the case is a little disappointing. There are sharp edges left and at least the silver version is actually a light colour plastic painted silver, so, in time, there will be areas where paint will be gone.
One more thing, the usb-c port opening is not wide enough to fit certain connectors (the original is fine though).
-= Sent from a parallel universe through a wormhole =-