hi i got this kindle off my friend i think its hard bricked not sure what he done, what happend is power light comes on and kindle fire logo then powers off, windows see's nothing. kindle fire logo seems to be yellow. so assuming its not rooted. just would like to know what type of brick this is and how to ge out of it if possible
Doesn't sound hard bricked, I would hook it up to a fastboot cable to see if it will enter fastboot mode, though the bootloader seems to be acting odd(unless it's a low battery but I think it would flash a low battery symbol on the screen instead of kindle fire).
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Doesn't sound hard bricked, I would hook it up to a fastboot cable to see if it will enter fastboot mode, though the bootloader seems to be acting odd(unless it's a low battery but I think it would flash a low battery symbol on the screen instead of kindle fire).
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
yeah it has power as it will do the same when unplugged. So to make a fast boot cable solder 1 to four is that right?
Yes that's pretty much all there is to it, though the cable has to kinda have the contact point for what I think is pin 4, because its not usually used so not all cables have a contact point for it on the little PCB.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Yeah just popped one open and has four so red to white? Also could you direct me to the thread to what to do once I have created one
ok done cable plugged in still doing same thing???
That's not what pin 4 is, pin 4 has no wire coming from it, there's a guide that tells about this around here somewhere, look in this thread for a link at Q20. http://forum.xda-developers.com/showthread.php?t=2228539
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
ok sorry i have the usb cable it has 4 wires red and green on one side black and white on the other, i have read many of these instructions cant get my head round them
ok on the back there are two pins that go in with numbers 2 and 4. on the front there are 3 pins one with the number 1
sweet found it thanks for your help device is in fast boot with like traffic lights
Related
Hi all,
Some time ago i rooted my girlfriend's KF. It's running the FFF 1.4a and TWRP.
A couple of weeks ago she complained that the kindle wasn't being charged anymore. The result was that the Kindle was dead and after pressing the power button it appeared "Charling low battery - Please wait".
I tried every single procedure that i found here: pressing the power button for 30 secs, the Kindle Fire Unbrick Utility with the shorting trick, the SoupKit...
I managed to boot in TWRP and charge the KF there. Now i have 100% battery.
I boot system normally but the Kindle continues to don't charge normally and it doesn't even recognize that the USB cable is on.
The cable is OK (works in my Xperia Play). I already tried another cables. I already tried to charge via the stock wall charger.
Is it possible to be a software issue? I'm starting to think that the conector is broken/damaged.
I will flash another ROM to see if it's this the problem (I'm currently running CM9)
rbgabriel said:
Hi all,
Some time ago i rooted my girlfriend's KF. It's running the FFF 1.4a and TWRP.
A couple of weeks ago she complained that the kindle wasn't being charged anymore. The result was that the Kindle was dead and after pressing the power button it appeared "Charling low battery - Please wait".
I tried every single procedure that i found here: pressing the power button for 30 secs, the Kindle Fire Unbrick Utility with the shorting trick, the SoupKit...
I managed to boot in TWRP and charge the KF there. Now i have 100% battery.
I boot system normally but the Kindle continues to don't charge normally and it doesn't even recognize that the USB cable is on.
The cable is OK (works in my Xperia Play). I already tried another cables. I already tried to charge via the stock wall charger.
Is it possible to be a software issue? I'm starting to think that the conector is broken/damaged.
I will flash another ROM to see if it's this the problem (I'm currently running CM9)
Click to expand...
Click to collapse
Flashing anything other than CM9 would be a good idea
Guitarman2010 said:
Flashing anything other than CM9 would be a good idea
Click to expand...
Click to collapse
Ok. I'll try that and will post the result
No good... At first boot after installation of new ROM, windows recognized the device, tried to install drivers but very quickly it stopped to recognize...
Now it's charging, but only with the cable inserted in a very particular position.
I'm completely clueless about what to do....
what about connected to the wall? same connection problem? then you have a bad connector. use soupkit and flash stock, and return to Amazon for a replacement. or open the case up and solder the power connector back on,
sent from The Muffinator (it's a kindle fire running cm10.1)
using Tapatalk 4 beta, and loving it!
jma9454 said:
what about connected to the wall? same connection problem? then you have a bad connector. use soupkit and flash stock, and return to Amazon for a replacement. or open the case up and solder the power connector back on,
sent from The Muffinator (it's a kindle fire running cm10.1)
using Tapatalk 4 beta, and loving it!
Click to expand...
Click to collapse
With the wall charger I don't get any charging. Do they send another Kindle overseas (I live in Brazil)? I think it's a connector problem...
rbgabriel said:
With the wall charger I don't get any charging. Do they send another Kindle overseas (I live in Brazil)? I think it's a connector problem...
Click to expand...
Click to collapse
I don't know. You would have to talk to an Amazon representative.
Sent from my Amazon Kindle Fire using Tapatalk HD
After installing COTR with the KFU, i went and downloaded FFF and the 4.2.2 ROM. After i plugged in the factory cable and plugged it into my computer to get it into recovery mode, After using KFU to send it to recover it froze on the kindle fire splash screen. I turned it off and turned it on again and it went in a endless loop of turning on and off on the kindle fire splash screen the orange one. Confused where i should go from here.
Running Win7 64-bit
What happens when you plug in the factory cable?
it keeps cycling on and off
What's the interval between on and off?
Just pluged it in and now it is stuck at the stock static kindle fire screen. Device now appears as unknown.
When it first comes on, does the kindle fire logo stay brightly lit, or does it go dim at any point?
Starts bright and then goes dim right after. Driver error says code 43.
You need a factory cable.
i have one, that is what i'm using.
ramsv94 said:
i have one, that is what i'm using.
Click to expand...
Click to collapse
Let me rephrase that. You need one that works.
oh dang, well the good thing is SkOrPn is already sending me another cable because he didn't like the one he sent me. Hopefully it works then. Out of curiosity, how do you know the cause is a bad wire? So i know what to look for.
If the factory cable were working properly, the Kindle Fire logo would stay brightly lit, indefinitely. There would be no change in brightness.
[Edit:] The fact that your KF logo goes dim means that it's not staying in fastboot.
soupmagnet said:
Let me rephrase that. You need one that works.
Click to expand...
Click to collapse
I sent him a second cable this morning. The first one was an emergency cable (test cable of different design) that I kept around just in case (I was out of stock when he ordered), however when I assembled it i noticed the case was way too small for the mod and I had to apply tremendous force just to get it to partially close. With that said, I tested that cable over and over multiple times with a very expensive multimeter. But maybe it has a intermittent connection I could not find with a meter, thanks no doubt to the force I used to assemble it. Possibly broke a solder joint is my guess.
Anyway does this cable need to stay connected or just launch Fastboot? When Fastboot launches don't you guys remove the cable and then attach your normal cables? I was told not to keep the cable connected once Fastboot launches and to attach a normal cable for fastboot commands. Is this no longer true or has that never been true?
Sent from my Nexus 7 using Tapatalk 4
SkOrPn said:
Anyway does this cable need to stay connected or just launch Fastboot? When Fastboot launches don't you guys remove the cable and then attach your normal cables? I was told not to keep the cable connected once Fastboot launches and to attach a normal cable for fastboot commands. Is this no longer true or has that never been true?
Click to expand...
Click to collapse
That's correct. Once the device is in fastboot, there's no need to use the cable anymore.
soupmagnet said:
That's correct. Once the device is in fastboot, there's no need to use the cable anymore.
Click to expand...
Click to collapse
Ok, ramsv94 told me that the cable is not "keeping" the device in fastboot. However once the device enters Fastboot couldn't he instantly remove the cable? And if so, if the device does not stay in fastboot mode once the cable is removed, how exactly is that the cables fault? No one has ever mentioned to me that the factory cable is responsible for "keeping" the device locked into fastboot mode. So now I am confused. Since that cable tested good over and over it makes it even more difficult to understand how it could be bad now. Lol...
I think I am going to completely rebuild my Bench Tester with a new female port this weekend. Just in case. Thanks soupmagnet for the quick response.
Sent from my Nexus 7 using Tapatalk 4
SkOrPn said:
Ok, ramsv94 told me that the cable is not "keeping" the device in fastboot. However once the device enters Fastboot couldn't he instantly remove the cable? And if so, if the device does not stay in fastboot mode once the cable is removed, how exactly is that the cables fault? No one has ever mentioned to me that the factory cable is responsible for "keeping" the device locked into fastboot mode. So now I am confused. Since that cable tested good over and over it makes it even more difficult to understand how it could be bad now. Lol...
I think I am going to completely rebuild my Bench Tester with a new female port this weekend. Just in case. Thanks soupmagnet for the quick response.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Here's the thing,
When the device is connected to the USB with the 1 & 4 pins connected, the device will boot into fastboot and stay in fastboot...period. With the stock bootloader, the device cannot start in fastboot, then start to boot normally. If FireFireFire were installed, however, the device would always start in fastboot mode for a few seconds, then proceed to boot normally. This function was added to help people in certain cases where the device is set to a normal bootmode, but without a working shell needed to enable fastboot.
There are two ways to determine whether or not the device is in fastboot. One, is by looking at the Kindle Fire logo at startup. If it is in fastboot, the Kindle Fire logo will be brightly lit and stay brightly lit. The other way is to check the system for what type of device is being connected to the USB. In Linux, this is done with the 'lsusb -v' command by checking the value of "bcdDevice". In Windows, this is done by looking at the device manager.
As astronomically improbable as it would be, ramsv94 has no way of determining, just by looking at the boot logo, that the device ever started up in fastboot and then began to boot normally with the stock bootloader installed.
Nevertheless, it's great that you're concerned about your customers, and your product, but you really have nothing to be worried about. You do good work, your cables are top quality, and this is the first one that I have ever seen that didn't work properly. Hundreds of Kindle Fire owners (including me) owe you a debt of gratitude for your service, and I can only hope that you continue to do so. :good::good:
soupmagnet said:
Here's the thing,
When the device is connected to the USB with the 1 & 4 pins connected, the device will boot into fastboot and stay in fastboot...period. With the stock bootloader, the device cannot start in fastboot, then start to boot normally. If FireFireFire were installed, however, the device would always start in fastboot mode for a few seconds, then proceed to boot normally. This function was added to help people in certain cases where the device is set to a normal bootmode, but without a working shell needed to enable fastboot.
There are two ways to determine whether or not the device is in fastboot. One, is by looking at the Kindle Fire logo at startup. If it is in fastboot, the Kindle Fire logo will be brightly lit and stay brightly lit. The other way is to check the system for what type of device is being connected to the USB. In Linux, this is done with the 'lsusb -v' command by checking the value of "bcdDevice". In Windows, this is done by looking at the device manager.
As astronomically improbable as it would be, ramsv94 has no way of determining, just by looking at the boot logo, that the device ever started up in fastboot and then began to boot normally with the stock bootloader installed.
Nevertheless, it's great that you're concerned about your customers, and your product, but you really have nothing to be worried about. You do good work, your cables are top quality, and this is the first one that I have ever seen that didn't work properly. Hundreds of Kindle Fire owners (including me) owe you a debt of gratitude for your service, and I can only hope that you continue to do so. :good::good:
Click to expand...
Click to collapse
thanks for the props bud... I am not worried any, I just get angry at myself when a tested good cable does not do its job just 3 days after I shipped it. you start to try and find another reason why this could be the case. A few hours ago I ordered two new Sparkfun micro-b breakout boards and I am going to redo my bench tester because this thing has been used thousands of times since late 2011. I test each connector before I solder on the wires, after I solder on the wires and after I hot glue the case together. That's three times during one cable build, so multiply that by 1100 cables and well you get the picture.
Anyway, I cant wait to see what happens when he gets the normal cable I built for him. lol
Can i use KFU to install FFF onto my Kindle or not?
ramsv94 said:
Can i use KFU to install FFF onto my Kindle or not?
Click to expand...
Click to collapse
Do you have access to fastboot?
This is where i am at right now. Kindle screen is lit bright so it is in fast boot mode. It is showing up on my computer as Android ADB Device. KFU says its offline. Attached Picture.
Alright, little bit of background. Customer ended up leaving a half broken (logic board was messed up) at my business. I gave them so much time to pick it up after it sat for a very long time. They didn't. I figured why not find a new board, ebay had horrible prices on the board I needed so I bought a busted kindle (digitizer.) I took all the parts from the newly purchased kindle and used them in the old ones perfectly uncracked digitizer. Also put a new battery in. So I immediately found out all the cool things you can do with them and wanted to install jellybean on it. I spent the night trying to install the wrong drivers (thought it was 1st gen.) Then I finally got it to recognize as an ADB device. So I then found a guide stating I needed a factory cord. I fired up my solder station and started working on a micro usb cable. First go was a bust, acted like normal and came up. Something went wrong, so I took out all the solder on the micro usb part and started fresh with fresh cut cables instead of the factory ones. Boom! Fastboot immediately upon plugging it in. However, no ding in windows, and no recognized device with the fastboot command. Nothing. Just the Fastboot screen and a blinking stop light with green blinking on and off. So, what do I do?
EDIT: Took out the 4th pin wire and no recognition on the PC still. I am going to stop by walmart and see if I can find a cheap cable to try again with. Does anyone know any typical big box stores that you can buy easily modded cables from? Also if anyone can link me to the guide for doing the jelly bean stuff to a 10.4.8 software kindle I'd appreciate knowing I have the right link, I searched through a lot of guides, want to verify. Thanks!
Here's the guide for 2nd bootloader + twrp, ignore the fact this process was meant for a lesser version, just either put the rom on ahead of time or push the rom on with an "adb push" once it starts to bootloop into recovery. The bootloop is of no concern, it won't happen once you flash another rom.
http://forum.xda-developers.com/showthread.php?t=2100963
Also just a warning, a bad fastboot cable can fry the kindles USB circuit, assume an ic or something partially shorts out, have seen it happen before on the forum. I don't have a link handy but there's a nifty adapted that goes between the end of a micro-usb cable and the kindle for fastboot mode, I believe its in the op of the thread I linked. Oh and please check the md5sum of the bootloader before downgrading/flashing it or you will risk hard brick it and be putting that soldering iron to some really good use...
Sent from my Amazon Kindle Fire HD using Tapatalk
I loaned my daughter and her husband my kindle fire 1st gen 2 years ago. Thinking I would never get it back, I bought another. This week, it showed up on my desk (and no one knows WHO brought it back). My daughter said her husband was "playing with it" a while back, then said it was "broke". When I pushed the power button, I get a blue logo of Kindle Fire (my new one is red), it is on for just a couple of seconds, then turns back off. When I plug it in to charge, the light doesn't come on... had a tech look at it, and he verified the battery is fully charged, but said it's a software issue, and that's not his department... he's a battery and cracked screen guy.
I have tried pressing and holding the power button, but no luck, still just get the fire logo for a second or two, then nothing.
Is there any hope of reinstalling the OS on this or do I now just have a cool coaster for my soda?
wholycow said:
I loaned my daughter and her husband my kindle fire 1st gen 2 years ago. Thinking I would never get it back, I bought another. This week, it showed up on my desk (and no one knows WHO brought it back). My daughter said her husband was "playing with it" a while back, then said it was "broke". When I pushed the power button, I get a blue logo of Kindle Fire (my new one is red), it is on for just a couple of seconds, then turns back off. When I plug it in to charge, the light doesn't come on... had a tech look at it, and he verified the battery is fully charged, but said it's a software issue, and that's not his department... he's a battery and cracked screen guy.
I have tried pressing and holding the power button, but no luck, still just get the fire logo for a second or two, then nothing.
Is there any hope of reinstalling the OS on this or do I now just have a cool coaster for my soda?
Click to expand...
Click to collapse
A couple of things to try
On a pc, use install.drivers.bat from Kindle Fire Utility v0.9.9
Then try to flash twrp and firefirefire with kindle fire utility
Links in my
[How To][Root] Kindle Fire 1 update 6.3.4 [2014]
If that fails may need a fastboot cable
How to flash twrp and firefirefire with a Fastboot cable
http://forum.xda-developers.com/showpost.php?p=53652317&postcount=2
Sent from my XT907 using Tapatalk
---------- Post added at 12:44 AM ---------- Previous post was at 12:42 AM ----------
Should be a kindle fire utility video in
[How To][Videos] For Kindle Fire 1 [2014]
Sent from my XT907 using Tapatalk
sd_shadow said:
A couple of things to try
On a pc, use install.drivers.bat from Kindle Fire Utility v0.9.9
Then try to flash twrp and firefirefire with kindle fire utility
Links in my
[How To][Root] Kindle Fire 1 update 6.3.4 [2014]
If that fails may need a fastboot cable
How to flash twrp and firefirefire with a Fastboot cable
http://forum.xda-developers.com/showpost.php?p=53652317&postcount=2
Sent from my XT907 using Tapatalk
---------- Post added at 12:44 AM ---------- Previous post was at 12:42 AM ----------
Should be a kindle fire utility video in
[How To][Videos] For Kindle Fire 1 [2014]
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Yup, it didn't work, so I just ordered the fastboot cable. Might I ask, what makes this cable so special? Just curious....
Thanks
wholycow said:
Yup, it didn't work, so I just ordered the fastboot cable. Might I ask, what makes this cable so special? Just curious....
Thanks
Click to expand...
Click to collapse
See
http://forum.xda-developers.com/showthread.php?p=59141378
Motorola USB Drivers, RSD Lite, Firmware...(2015)
* What is a Fastboot Cable
Sent from my Motorola RAZR MAXX using Tapatalk
hi y'all nice and lucky people! Kindle Fire Murderer (me) has literally murdered his Kindle! you see, it has FFF with android Ice Cream Sandwich, but I wanted to dualboot with stock rooted, and was too lazy to go to recovery and mtp, so using fastboot I just flashed the FFF extended zip as a bootloader, and now I cant turn on my Kindle FIre! I tried the 20 seconds hole power button, and still, it doesn't turn on! even Fastboot doesn't work! and the back cover wont open, so no, I cannot do the USB Boot stuff! :crying: :crying: :crying:
KINDLE FIRE MURDERER said:
hi y'all nice and lucky people! Kindle Fire Murderer (me) has literally murdered his Kindle! you see, it has FFF with android Ice Cream Sandwich, but I wanted to dualboot with stock rooted, and was too lazy to go to recovery and mtp, so using fastboot I just flashed the FFF extended zip as a bootloader, and now I cant turn on my Kindle FIre! I tried the 20 seconds hole power button, and still, it doesn't turn on! even Fastboot doesn't work! and the back cover wont open, so no, I cannot do the USB Boot stuff! :crying: :crying: :crying:
Click to expand...
Click to collapse
edit : I opened thw back cover, but don't understand, what do you mean by "shorting" the pin? do I cut it? or do I connect it with something! please explain and help me, the stupid n00b who bricked his kindle fire! I saw the pin Pokey9000 circled saying to "short circuit it" BUT HOW :crying::crying::crying::crying::crying: help, anyone, please, how to USB Boot and do the weird shorting stuff.....
KINDLE FIRE MURDERER said:
edit : I opened thw back cover, but don't understand, what do you mean by "shorting" the pin? do I cut it? or do I connect it with something! please explain and help me, the stupid n00b who bricked his kindle fire! I saw the pin Pokey9000 circled saying to "short circuit it" BUT HOW :crying::crying::crying::crying::crying: help, anyone, please, how to USB Boot and do the weird shorting stuff.....
Click to expand...
Click to collapse
Short to metal frame
Sent from my XT1060 using Tapatalk
sd_shadow said:
Short to metal frame
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
so like, I connect it to the metal frame using the paper clip? if yes, then once that is done, in the firekit usb repair stuff, I chose usb boot twrp, so when it is doing that, should I keep the aperclip connected to metal frame and pin? or only for the first one second I connect the paperclip? thanks, in advance.
Sincerely,
An Idiot who screwed up
KINDLE FIRE MURDERER said:
so like, I connect it to the metal frame using the paper clip? if yes, then once that is done, in the firekit usb repair stuff, I chose usb boot twrp, so when it is doing that, should I keep the aperclip connected to metal frame and pin? or only for the first one second I connect the paperclip? thanks, in advance.
Sincerely,
An Idiot who screwed up
Click to expand...
Click to collapse
short the specified pin to metal frame, then press power, remove short.
run firekit
Sent from my KFFOWI using Tapatalk
sd_shadow said:
short the specified pin to metal frame, then press power, remove short.
run firekit
Sent from my KFFOWI using Tapatalk
Click to expand...
Click to collapse
thanks! will tell results.....