[Q] Steps for updating google apps? - Paranoid Android Q&A

So I finally decided to try a custom ROM on my Galaxy S2 I9100 and went for paranoid android. I went with this version pa_i9100-3.99-RC2-20131031.zip and this version for google apps gapps-jb-20130726-pa4.3.zip. My question is a really basic one. How do I keep up to date? Solely through GooManager? When a new version is released what steps do I follow? Thanks in advance.

robocode said:
So I finally decided to try a custom ROM on my Galaxy S2 I9100 and went for paranoid android. I went with this version pa_i9100-3.99-RC2-20131031.zip and this version for google apps gapps-jb-20130726-pa4.3.zip. My question is a really basic one. How do I keep up to date? Solely through GooManager? When a new version is released what steps do I follow? Thanks in advance.
Click to expand...
Click to collapse
You were able to root the phone and get the custom ROM on there so that's the hard part. Every ROM thread will usually let you know if you need to do a full wipe or or just wipe caches. I think its best to download to computer then move zip pkg to SD card on phone. Pay attention to gapps packages. They can vary with what ROM you're going to flash. Use the one recommended for each ROM. Do yourself a favor and read. That way you can learn from mistakes other people make or better yet, have less chance to make any mistake. Take your time.
Sent from my SGH-M919 using Tapatalk

Bowmanspeer said:
You were able to root the phone and get the custom ROM on there so that's the hard part. Every ROM thread will usually let you know if you need to do a full wipe or or just wipe caches. I think its best to download to computer then move zip pkg to SD card on phone. Pay attention to gapps packages. They can vary with what ROM you're going to flash. Use the one recommended for each ROM. Do yourself a favor and read. That way you can learn from mistakes other people make or better yet, have less chance to make any mistake. Take your time.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Great, thanks. With the gapps packages, once I install the appropriate zip (found on the ROM thread), do I then update through the Play store or through GooManager? How will I know if the update is the correct one for my ROM?

robocode said:
Great, thanks. With the gapps packages, once I install the appropriate zip (found on the ROM thread), do I then update through the Play store or through GooManager? How will I know if the update is the correct one for my ROM?
Click to expand...
Click to collapse
Your ROM manager is smart like that. Be sure to take your time and read. If you don't, you could have problems.
Sent from my SGH-M919 using Tapatalk

robocode said:
Great, thanks. With the gapps packages, once I install the appropriate zip (found on the ROM thread), do I then update through the Play store or through GooManager? How will I know if the update is the correct one for my ROM?
Click to expand...
Click to collapse
You never have to update your Google Apps "package" (unless you flash a new ROM). Once the GApps package is installed, all of the pieces are updated individually through the Play Store.

That's great to hear, thanks. That answers my question!

Related

[Q] How To Update Rooted S3?

I have a rooted Galaxy S3 with stock rom.
I keep getting a pop up for a system update, but cant update.
Please tell me how to manually update, and (where) I can find the latest stock updated software
Thanks
Voodoo8648 said:
I have a rooted Galaxy S3 with stock rom.
I keep getting a pop up for a system update, but cant update.
Please tell me how to manually update, and (where) I can find the latest stock updated software
Thanks
Click to expand...
Click to collapse
Take a look in the android dev sections to this forum. If you ever update once rooted, you should be flashing a new ROM (clean or dirty flashing) to receive the next update. Running stock ROM in between a Sammy update and while having the older ROM without the newest update will yield that result.
Xontic said:
Take a look in the android dev sections to this forum. If you ever update once rooted, you should be flashing a new ROM (clean or dirty flashing) to receive the next update. Running stock ROM in between a Sammy update and while having the older ROM without the newest update will yield that result.
Click to expand...
Click to collapse
I dont know what any of that means.. I just want to update my phone. This cant be brain surgery.
Voodoo8648 said:
I dont know what any of that means.. I just want to update my phone. This cant be brain surgery.
Click to expand...
Click to collapse
This might be a foolish question, but why root your phone to leave it as is?
Xontic said:
This might be a foolish question, but why root your phone to leave it as is?
Click to expand...
Click to collapse
Wonderful question. I would LOVE to unroot my phone :good:
lol, well if you want to read up on installing a custom ROM, then that is your ticket to experiencing the world of rooted phone glory. If not, I recommend looking up the unroot method...
Xontic said:
This might be a foolish question, but why root your phone to leave it as is?
Click to expand...
Click to collapse
There are plenty of reasons for rooting but remaining stock (such as: tethering, Droid wall, Titanium Backup to allow me to backup and restore app data, removing bloat, etc).
I have flashed custom rooms in the past on my Evo but right now I am happy with my S3 at stock.
Sent from my SPH-L710 using xda app-developers app
Xontic said:
lol, well if you want to read up on installing a custom ROM, then that is your ticket to experiencing the world of rooted phone glory. If not, I recommend looking up the unroot method...
Click to expand...
Click to collapse
Oh, okay, Thanks for the help!
Voodoo8648 said:
I have a rooted Galaxy S3 with stock rom.
I keep getting a pop up for a system update, but cant update.
Please tell me how to manually update, and (where) I can find the latest stock updated software
Thanks
Click to expand...
Click to collapse
I was in the same boat at you. I put it off for a while but finally decided to update tonight. I followed the steps posted here.
You can update your baseband by flashing a properly packaged official baseband zip, or flash from recovery tool (my preference), like the one here: http://forum.xda-developers.com/showthread.php?p=29820376. There are also unofficial, or leaked basebands, available to flash from all-in-one zips, such as the one here: http://goo.im/devs/freeza/Galaxy-S-fre3-LIGFirmwareModemAIO.zip.
As far as the build version goes, that does not have to match your baseband (modem). Most of the ICS ROMs are LG8, although there are some LI3 ICS ROMs to choose from. There's also a leaked build of Jellybean, builds LIF & LIG, with a third leak LIH reportedly coming out tomorrow. Once rooted, you can update your build version by flashing the ROM of your choice, based upon the build of your choice.
One of the top developers, and probably the greatest asset to this community, is freeza. He explained the difference very well here: http://forum.xda-developers.com/showthread.php?p=32095775
That's a long-winded response, but I hope it answered your original question, and helps you out.
Have fun!
Edit: Once you're rooted, you'll still receive OTA update notifications, which will continually annoy you until you choose to update and reboot. Once you reboot, the update will fail because of your custom recovery (you will NOT lose root) and the notification will go away....until the next OTA...
Sent from my SPH-L710 using xda premium
m20120 said:
I was in the same boat at you. I put it off for a while but finally decided to update tonight. I followed the steps posted here.
Click to expand...
Click to collapse
Excuse me for my stupidity but I'm new to android. I'm also using the sprint variant of the s3 and have it rooted with stock rom. However my build number is IMM76D.L710VPALF9. I'm assuming the last 3 are the update versions. What is the current version and how do I update to it?
Also, I'm rooted with Clockwork mod 5.5.0.4. How do I upgrade this to version 6.0.1.2? Will I have to unroot then root again?
Thanks for clearing anything you can up. Don't mean to pirate the OP but I figured I'd post in this thread rather than make a new one. Thanks again.
johnnygabe89 said:
Excuse me for my stupidity but I'm new to android. I'm also using the sprint variant of the s3 and have it rooted with stock rom. However my build number is IMM76D.L710VPALF9. I'm assuming the last 3 are the update versions. What is the current version and how do I update to it?
Also, I'm rooted with Clockwork mod 5.5.0.4. How do I upgrade this to version 6.0.1.2? Will I have to unroot then root again?
Thanks for clearing anything you can up. Don't mean to pirate the OP but I figured I'd post in this thread rather than make a new one. Thanks again.
Click to expand...
Click to collapse
You can flash a new recovery using ODIN, or Mobile ODIN. I use Mobile ODIN. There's a thread on recoveries here: http://forum.xda-developers.com/showthread.php?p=31894089
As far as the versions, see my previous post on this thread.
Sent from my SPH-L710 using xda premium
Can anyone tell me how to just UNROOT?
Maybe step by step instructions and where to get the software?
Thanks
Voodoo8648 said:
Can anyone tell me how to just UNROOT?
Maybe step by step instructions and where to get the software?
Thanks
Click to expand...
Click to collapse
There is a link to a video of the unroot process in this post.
I just discovered a reason NOT to unroot...
I just found out that I can tether free wifi hotspot!
Zoing!:victory:
Voodoo8648 said:
I just discovered a reason NOT to unroot...
I just found out that I can tether free wifi hotspot!
Zoing!:victory:
Click to expand...
Click to collapse
That is one of the reasons that I am rooted... so I can use WiFi Tether. I do not it much. Hardly any data at all. But when I am in a spot and need a wireless connection and I only have my phone it comes in handy.
Some other reasons:
- DroidWall: Lets me block individual apps from accessing the internet.
- AddFree: Block ads in some apps.
why would you do that?
Xontic said:
This might be a foolish question, but why root your phone to leave it as is?
Click to expand...
Click to collapse
so you don't have to pay Sprint 12 dollars a month to teather.

[Tutorial] Rooting the Sprint GalaxyS3 the Easy Way

Mods, please lock this thread.
Thanks skunk ape!
Sent from my SPH-L710 using xda premium
Thread stuck!
The zip would not flash in recovery, phone is running the official jellybean.
Any ideas?
Sent from my SAMSUNG-SGH-I747 using xda premium
los0325 said:
The zip would not flash in recovery, phone is running the official jellybean.
Any ideas?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Which zip would not flash in recovery?
The only zip you will flash in recovery is team epic root from recovery. And it must be flashed in the recovery that was installed with Odin.
If you let the phone restart after flashing recovery in Odin the custom recovery will be replaced by the stock recovery.
Skunk Ape1 said:
Which zip would not flash in recovery?
The only zip you will flash in recovery is team epic root from recovery. And it must be flashed in the recovery that was installed with Odin.
If you let the phone restart after flashing recovery in Odin the custom recovery will be replaced by the stock recovery.
Click to expand...
Click to collapse
Omg bro I'm so sorry, I feel like a noob
Sent from my SAMSUNG-SGH-I747 using xda premium
los0325 said:
Omg bro I'm so sorry, I feel like a noob
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
So you figure it out?
Skunk Ape1 said:
So you figure it out?
Click to expand...
Click to collapse
Yes sir I did thanks
Sent from my SAMSUNG-SGH-I747 using xda premium
Will this work with the latest update and does it wipe data?
jstn76rs said:
Will this work with the latest update and does it wipe data?
Click to expand...
Click to collapse
It will not wipe any data and can be used to root any version android on the Sprint gs3.
Skunk Ape1 said:
It will not wipe any data and can be used to root any version android on the Sprint gs3.
Click to expand...
Click to collapse
Thanks for the quick reply. Will give this a go as soon as my wife gives me the ok.
jstn76rs said:
Thanks for the quick reply. Will give this a go as soon as my wife gives me the ok.
Click to expand...
Click to collapse
Really?
If you need anything, I monitor this thread and will provide support if needed.
Thanks!
As a TOTAL noob: appreciate the easy explanation! Waiting to do this myself, but have a few quick questions first. I've done a lot of reading up on rooting but I'm still not entirely clear on a few things so I'm hoping someone can explain it to me like I'm five:
1. Can I accept over-the-air updates from Sprint on a rooted phone? i.e. when they push Android 4.2. If not, do I unroot and reroot to update? Do I have to uninstall everything?
2. Is there something I need to install after doing this? I previously rooted an HTC EVO and remember having to install Superuser immediately after. Anything similar here? Looking to ultimately run wifi tether so any advice toward that end would be greatly appreciated.
3. I'm a little confused about rooting/flashing and some basic definitions. Are they the same thing? I hear a lot about CyanogenMod - what is it and is it coming into play here?
Thanks so much!!
As a TOTAL noob: appreciate the easy explanation! Waiting to do this myself, but have a few quick questions first. I've done a lot of reading up on rooting but I'm still not entirely clear on a few things so I'm hoping someone can explain it to me like I'm five:
1. Can I accept over-the-air updates from Sprint on a rooted phone? i.e. when they push Android 4.2. If not, do I unroot and reroot to update? Do I have to uninstall everything?
This is not going to be a straight up yes or no answer. If an update comes ota to your phone, you will be able to receive it providing you:
1. reflash stock recovery before accepting it.
2. haven't flashed a custom rom
3. haven't removed any required software. The ota will look for certain software and files. if the required software and files aren't present the ota will fail
None of this should concern you though. There are ALWAYS ways to get the updates while being rooted
2. Is there something I need to install after doing this? I previously rooted an HTC EVO and remember having to install Superuser immediately after. Anything similar here? Looking to ultimately run wifi tether so any advice toward that end would be greatly appreciated.
These instructions seem like you are doing many things. You aren't. There are really only 5 steps. I just broke all the steps down in detail. Really all this is:
1. Downloading all the files to your computer
2. Installing your Samsung Drivers to your computer
3. Copying one file to your phones sd or external sd card. (Team_Epic Root_From Recovery)
4. Flashing CWM Recovery to your phone with Odin.
5. Flashing TeamEpic-Root-from-Recovery-v5.zip with CWM Recovery
The Team Epic File that you are flashing in recovery installs superuser, busy box, and in addition removes two files needed to make recovery stick.
3. I'm a little confused about rooting/flashing and some basic definitions. Are they the same thing? I hear a lot about CyanogenMod - what is it and is it coming into play here?
Rooting is really nothing more than giving you the user, the right to access root or system files. It has very little to do with flashing as you can flash updates with stock recovery.
Flashing is simply installing something in a tar, img, or zip format. tar files are flashed with Odin, zips are flashed from recovery and img files are flashed or pushed with adb (Android Debug Bridge)or fastboot.
Cyanogen is a rom. roms are very simply the phones operating system and user interface. They're called roms because their files are kept on read only memory. There are many roms out there for our phone.
Awesome, appreciate the prompt response - thanks so much!!
Thanks!
Thanks for putting this together. My new gs3 arrives tomorrow and I have already prepped my computer with your files in anticipation.
I'll report back how it works out.
Thanks again!
One more thing
When I do get my phone should I activate it first or root it first or does it matter?
I know it voids the warranty but I guess I could unroot to take it in for service if needed?
Thanks again.
brianando said:
When I do get my phone should I activate it first or root it first or does it matter?
I know it voids the warranty but I guess I could unroot to take it in for service if needed?
Thanks again.
Click to expand...
Click to collapse
I would activate it.
This works with the 4.1 update, correct?
I previously had the Galaxy S1 (Epic) and went through several custom ROMs before finally going back to a stable release with root because of dissatisfaction with the ROMs. My phone never really returned to perfect functionality after this experimentation, and always had some buggy glitches and many FC's. Now that I have a perfectly running GS3 with Android 4.1, I would love to be able to wifi tether and install apps like adblock and Titanium Backup Pro, but I am hesitant because of my past experience.
Do you think there is any reason at all that simply doing this root procedure would change the functionality of my perfectly smooth-running GS3?

A noob's guide to rooting and flashing

Looking into rooting? Maybe try this foreign ROM thing? (Not talking about ethnicities here) Here is the place to be.
First of all, make sure you have a T-Mobile Galaxy S3. (Aka t999 or d2tmo)
If you follow instructions here for any other device, even for galaxy s3's of another carrier you are extremely likely to regret it and end up having to unbrick your device because you installed an incompatible file.
You can take your battery out to make sure it says t999 under if you are not absolutely sure.
Rooting is a similar idea to jail breaking an iPhone. It removes what restrictions there are with android devices. Yes, it is perfectly legal.
Which leads me to my disclaimer:
I take no credit for what's posted here.
The only work here that's mine is the organization. Please donate to the rightful people who spent quality time developing.
Also I am not responsible for any damage done to your device.
It is vital that you follow instructions in every exact detail.
Firstly, rooting.
1. Install drivers for your device onto your PC. To do this, you can install Samsung Kies or there are downloads that will install the drivers solely(recommended link for drivers http://d-h.st/zya)(thanks DocHoliday77). If you get to the point where you can exchange files to phone from the computer and vice-versa then you're set for drivers.
2. Do a backup (using Kies or a program of your choice)
3.Uninstall Kies. Kies doesn't play nicely with the program used to root called Odin. So uninstall Kies so Odin can work unhindered. Your drivers should stay. But make sure you can still copy files between your phone and computer before proceeding.
4.Follow these instructions put together by OfficialPhoneRebel(aka EverythingApplePro):
http://www.youtube.com/watch?v=fKwhAVj5Feg Outdated. try CF-Auto-Root
Yes, I used this method and it did work for me.
5.After you are rooted, the first thing you wanna do is either install ROM manager (on play store). Open ROM manager. (Yes, give it superuser rights) and install the latest clockworkmod recovery, or use GooManager to get TWRP recovery, both work, but sometimes one is suggested for the installation of a specific ROM.
6.Now install busybox(also in play store)
7.You're all done!
If you've made it this far, kudos. Now you're gonna wanna get the app called titanium backup and do a full backup of your phone. Also boot into recovery (home+volume up then press power until it vibrates all while holding home+volume up buttons) do a backup through these menus. If your feeling like an over achiever and wanna be super safe then go ahead and back up to both your internal sdcard and your external sdcard. Also it now would be wise to back up your IMEI nv (basically your phone's identity), instructions for that can be found here (thanks to daxecutioner24)
Now you have reached a possible stopping point. Stop here and enjoy root privileges. Continue to read how to install a custom ROM.
Installing a custom ROM(operating system):
GooManager (on play store) is a pretty good directory for ROMs. And is a great place to download them and gapps. Now since not every ROM installs this way it is important to check the main page associated with that page to see if any special instructions are required.
But this is what you generally do.
http://forum.xda-developers.com/showthread.php?t=1946701
Roms:
Gapps can be found either on the ROM's page or through goo manager make sure the firmware versions match up (like android 4.1 and 4.1 jelly bean gapps)
For a pure android ROM I would suggest CyanogenMod 10.1 (the one I am currently on)
For an inverted stock ROM stuffed with fun features I would suggest DaRTHSTALKER S3
For a full list of roms and descriptions or if your just addicted to flashing, then here's the stockpile of almost every rom made for the galaxy s3 t999
http://forum.xda-developers.com/showthread.php?t=2088179
Backups are your friend. Especially through recovery mode. They have saved my butt several times when flashing a ROM went wrong.
And yes it is possible to sim unlock (make it so you can use it on any GSM network(such as at&t or US cellular)) your phone:
http://forum.xda-developers.com/showthread.php?t=2037390
Problem happened and you can no longer boot correctly? This is actually very common.
If you can boot into recovery:
Boot into recovery (Hold home button and volume up then press power till it vibrates all while holding volume up and home)
Restore backup (easiest method)
If that falls through then install a rom by following the instructions mentioned earlier.
If you can't boot into recovery or if those methods didn't work:
You must odin to stock. Follow the instructions here under using odin. Odin and Driver files are at the top of the post. Firmware files (what you put in PDA) are located here
If this didn't work, you may be out of luck, try again and if you are still stuck browse the forums and possible post something under Q and A if worst comes to worse, make sure to describe the entire situation including error messages you may have received so the problem can be pinpointed.
And finally, everyone be nice seeing as I am welcoming very new people to this thread.
Also if any suggestions to improve this post let me know.
Sent from my SGH-T999 using xda app-developers app
Good job
I like this post, would save those useless threads how do I root even though it's sticky all over. Also it would be really helpful if you include how to back up your IMEI nv maybe link the thread before they start flashing roms. This is probably one of the most important thing as when you start flashing stuff the IMEI might get lost and without that there is no phone. Everything else looks good.
Here's the link
http://forum.xda-developers.com/showthread.php?p=29514187
Sent from my SGH-T999 using xda app-developers app
daxecutioner24 said:
I like this post, would save those useless threads how do I root even though it's sticky all over. Also it would be really helpful if you include how to back up your IMEI nv maybe link the thread before they start flashing roms. This is probably one of the most important thing as when you start flashing stuff the IMEI might get lost and without that there is no phone. Everything else looks good.
Here's the link
http://forum.xda-developers.com/showthread.php?p=29514187
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thank you!! I implemented that into my instructions. The goal of this thread is to be the thread that everyone can direct newbies here and not have a thousand different threads on the same thing. Also this way people can get their answers faster seeing as their questions will be in the same known place not in some obscure oddly-titled thread in the wrong section. Thanks!
ignorethis
will this work on my T-Mobile Galaxy S3 4.1.2?
Sent from my SGH-T999 using xda premium
Will this work on a 4.1.2 version and yes I do have the galaxy s3 t-999 T-Mobile please respond back asap thank you
Sent from my SGH-T999 using xda premium
It should work fine.
I suggest either CF AutoRoot or root66 (see firmware link in my sig) as the best ways too root. Imo.
Sent from my SGH-T999 using xda premium
Yes this works for that all you needed to do is click on the CF-Auto-Root method during the process and that would've been explained to you. I have used CF-Auto-Root atleast twice on two different galaxy s3's running jellybean 4.1.2 and it worked more than flawlessly
Sent from my SPH-L300 using xda app-developers app
Just fyi, though, CF Autoroot aparently does not work fot the new T999L.
Sent from my SGH-T999L using xda premium
Thanks for the info, make sure to read read read, about any changes you are going to do to your phone and always backup! Cheers!
Sent from my SGH-T999 using xda app-developers app
So after I root with this method can I still install a custom recovery and install Roms
Sent from my SCH-I605 using Tapatalk
timmyd463229 said:
So after I root with this method can I still install a custom recovery and install Roms
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
What android version are you running
I have a lg g flex tmobile. Can i install custom recovery and install roms?with this method?
raygozao said:
I have a lg g flex tmobile. Can i install custom recovery and install roms?with this method?
Click to expand...
Click to collapse
No
What about kernels? What exactly are they and how should you flash them (do you even need to)?
Can you still use Galaxy S3 motion activated features after flashing a custom ROM?
Squishy Crayons said:
What about kernels? What exactly are they and how should you flash them (do you even need to)?
Can you still use Galaxy S3 motion activated features after flashing a custom ROM?
Click to expand...
Click to collapse
kernel is when hardware need something like you bluetooth or need to adjust screen brightness it send a request to kernel bla bla bla.
you can only flash a kernel that is compatible to your rom by rebooting to recovery
Squishy Crayons said:
What about kernels? What exactly are they and how should you flash them (do you even need to)?
Can you still use Galaxy S3 motion activated features after flashing a custom ROM?
Click to expand...
Click to collapse
The way I understand it is the kernel is the bridge between your input and the devices output. Like the bridge between software and hardware... Sorta.. Ya you don't need to flash one sometimes custom kernels can add features and maybe improve GPS/battery life but I don't use custom kernels much. But that's just me some people are in to that stuff.
And yeah it just depends on the specific ROM for the specific features. I don't know if this is still a think its been a while since I've had some Samsung action but check our hyperdrive they had some good stuff going on when I used em.
Best bet is Google. Everything you could ever want to know about kernels and more! If you want to know about custom ones, read the OP's of the many available ones.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

[Q] what's the deal with 4.3?

- For android 4.3, there has been a lot of talk on the developer section, and from what I can see, the major bugs/issues have been fixed. Like the ROM not rebooting correctly. For those using 4.3, is this true?
- Also, from what I understand, this was due to the recoveries not being ready for 4.3, however CM released their own bare bone recovery to fix that issue. And then I've read that the TW recovery has also been updated to solve this problem.
-There is a lot of information in the development forums, but I have not seen any post on the steps on what to do in order to upgrade from 4.2 to 4.3.
-Right now I have CWM 5 recovery, because that's been working for me, and I never bothered changing (bad experience with trying to upgrade/change a recovery). Now from what I understand, I should be able to flash the newest touch recovery (via the goo app?), and then wipe and flash any 4.3 ROM. Any detail instructions would be a help, or if someone can create a tutorial post, that would be great.
Thanks in advance.
Here is a post I made yesterday about how I switched from 4.2 to 4.3
I hope it helps. I have been on hellybean 4.3 for two days and everything is running great.
http://forum.xda-developers.com/showpost.php?p=45021060&postcount=632
You could just install ROM Manager and update from there. It's super-easy (you need ROOT, but I presume you have that since you're flashing ROMs anyway). :good:
Sicily1918 said:
You could just install ROM Manager and update from there. It's super-easy (you need ROOT, but I presume you have that since you're flashing ROMs anyway). :good:
Click to expand...
Click to collapse
Many people have had bad experiences with ROM Manager. Especially in the Gingerbread days when its use was more common for this sort of thing.
Just my 2 cents.
monkeybuttons said:
Many people have had bad experiences with ROM Manager. Especially in the Gingerbread days when its use was more common for this sort of thing.
Just my 2 cents.
Click to expand...
Click to collapse
Interesting -- always been good to me, although I only use it to update the recovery; for the ROM itself I use Cyanogen's update util. I also use CWM, not TWRP, so there's that...
bobiscool07 said:
- For android 4.3, there has been a lot of talk on the developer section, and from what I can see, the major bugs/issues have been fixed. Like the ROM not rebooting correctly. For those using 4.3, is this true?
- Also, from what I understand, this was due to the recoveries not being ready for 4.3, however CM released their own bare bone recovery to fix that issue. And then I've read that the TW recovery has also been updated to solve this problem.
-There is a lot of information in the development forums, but I have not seen any post on the steps on what to do in order to upgrade from 4.2 to 4.3.
-Right now I have CWM 5 recovery, because that's been working for me, and I never bothered changing (bad experience with trying to upgrade/change a recovery). Now from what I understand, I should be able to flash the newest touch recovery (via the goo app?), and then wipe and flash any 4.3 ROM. Any detail instructions would be a help, or if someone can create a tutorial post, that would be great.
Thanks in advance.
Click to expand...
Click to collapse
Ur best and safest approach would be to DL Odin and the drivers for ur phone, then go to techerrata.com/browse/twrp2/hercules and DL twrp2.6.0.4, this is the 4.3 compatible version, then put ur device in DL mode and connect to odin, load the tar file in PDA and click start, 30 sec and u have the latest and greatest twrp recovery, now go get hellybean 4.3 or beanstalk4.3 and flash it, watch the beauty take place...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
I updated my rom today like I usually do from the CMUpdater and it updated from 4.2 to 4.3. I didn't mean or want to do that, but it didn't tell me otherwise. Now I'm having issues left and right......the one time I don't back it up...grrr.
I'm having the most issues with Gapps. I downloaded the new one and installed it and Google Music and Youtube keeps crashing. I guess I'll be doing the full wipe now.
Did u update to 4 3 gapps? It won't do it automatically, even if u updated through goo it just looks at what version is installed and updates that version, 4.3 gapps can be found in any 4.3 thread
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
soupysoup said:
Ur best and safest approach would be to DL Odin and the drivers for ur phone, then go to techerrata.com/browse/twrp2/hercules and DL twrp2.6.0.4, this is the 4.3 compatible version, then put ur device in DL mode and connect to odin, load the tar file in PDA and click start, 30 sec and u have the latest and greatest twrp recovery, now go get hellybean 4.3 or beanstalk4.3 and flash it, watch the beauty take place...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why do some of those files say hercules, and others sgh-t989? Aren't they the same phone?

[Q] How can I use Multiboot? MultiRom?

I saw on a thread that someone was using "Multiboot" to run CM11 as their daily driver but also having TW on it to use for WiFi calling and such.... I want to ask:
Was this a fib?
If not then how can I do it?
Is there a guide I can look at?
If it is possible then I would like to run CM11 and TW 4.1.2, I already have the images and ODIN for that. I never updated to 4.3 so I don't think that is a problem?
If you have help please quote my post so I can get a handy email of the response ^-^
Thanks
ShernDog said:
I saw on a thread that someone was using "Multiboot" to run CM11 as their daily driver but also having TW on it to use for WiFi calling and such.... I want to ask:
Was this a fib?
If not then how can I do it?
Is there a guide I can look at?
If it is possible then I would like to run CM11 and TW 4.1.2, I already have the images and ODIN for that. I never updated to 4.3 so I don't think that is a problem?
If you have help please quote my post so I can get a handy email of the response ^-^
Thanks
Click to expand...
Click to collapse
Good morning.
This describes me. I use CM as my daily driver but I use z999 Touchwiz ROM as a backup for the wifi calling.
Quick questions: are you rooted? Have you flashed a custom ROM/recovery before? Your answers will help me in answering your questions on how to do.
Bass_Man25 said:
Good morning.
This describes me. I use CM as my daily driver but I use z999 Touchwiz ROM as a backup for the wifi calling.
Quick questions: are you rooted? Have you flashed a custom ROM/recovery before? Your answers will help me in answering your questions on how to do.
Click to expand...
Click to collapse
Yes I'm rooted, have CM11 installed with the latest CWM recovery.
ShernDog said:
Yes I'm rooted, have CM11 installed with the latest CWM recovery.
Click to expand...
Click to collapse
Simply follow this thread
It only took a quick search of "multiboot" in development to find this thread.
ShernDog said:
Yes I'm rooted, have CM11 installed with the latest CWM recovery.
Click to expand...
Click to collapse
Get the AT&T version 2.12 - it has a fix in it for the External SD card that appeared in 2.11. While it's an AT&T recovery, it'll work fine on our phones as the TMO and AT&T S3 are the same phones.
Once you have the file, flash it via CWM and you'll have a MultiBoot TWRP as your recovery. The thread for the MultiBoot Recovery has a couple of Youtube videos that walk through setting up additional ROMs. I'm currently using z999 (Odexed 4.1.2 TW ROM) as my backup ROM to use for Wi-Fi calling.
Let me know if you have any additional questions.
Thank you, I'll try this tonight. I searched multiboot online but didn't find anything and Tapatalk doesn't have a good search function :/
ShernDog said:
Thank you, I'll try this tonight. I searched multiboot online but didn't find anything and Tapatalk doesn't have a good search function :/
Click to expand...
Click to collapse
Did you have any luck?
My schedule is busy I'll try it asap
Bass_Man25 said:
Get the AT&T version 2.12 - it has a fix in it for the External SD card that appeared in 2.11. While it's an AT&T recovery, it'll work fine on our phones as the TMO and AT&T S3 are the same phones.
Once you have the file, flash it via CWM and you'll have a MultiBoot TWRP as your recovery. The thread for the MultiBoot Recovery has a couple of Youtube videos that walk through setting up additional ROMs. I'm currently using z999 (Odexed 4.1.2 TW ROM) as my backup ROM to use for Wi-Fi calling.
Let me know if you have any additional questions.
Click to expand...
Click to collapse
I have a question. This external SD Care problem, what was it? Was it an issue with the card getting unmounted? Or was it another issue?
GS³: Carbonized, KT747'd, Philz'd
mp3deviant721 said:
I have a question. This external SD Care problem, what was it? Was it an issue with the card getting unmounted? Or was it another issue?
GS³: Carbonized, KT747'd, Philz'd
Click to expand...
Click to collapse
For some reason, on the 2.11 version, I couldn't get the secondary ROM to see my external SD card. I backup all of my apps there - it was a pain to copy my backups to the internal SD card. There were a lot of comments about the issue on the AT&T forum and the developer put out a new version (2.12). However, he never put out a version for d2tmo - only d2att. So, I messed around with the install script and loaded the newer recovery on my phone. External SD problem solved.
Sent from my SGH-T999 using XDA Free mobile app
Bass_Man25 said:
For some reason, on the 2.11 version, I couldn't get the secondary ROM to see my external SD card. I backup all of my apps there - it was a pain to copy my backups to the internal SD card. There were a lot of comments about the issue on the AT&T forum and the developer put out a new version (2.12). However, he never put out a version for d2tmo - only d2att. So, I messed around with the install script and loaded the newer recovery on my phone. External SD problem solved.
Sent from my SGH-T999 using XDA Free mobile app
Click to expand...
Click to collapse
Okay so I am researching how to do it and I believe I understand BUT the T-mobile TW file I have has to be flashed through ODIN, it's not a zip, and I want CM to be my stock ROM. So I was searching for a 4.1.2 TW rom (I prefer that version) and couldn't find any zip files...
Do you know how to help me? Do you know where to find a stock .zip flashable through recovery?
I followed all the instructions to use multiboot and I got the z999 touchwiz rom on there but then it wouldn't "find" my CM rom that was already on there so I ended up formatting and having no OS, so I tried to sideload but the multiboot stuff messed it up so I'm using ODIN to go back to stock >.> this has failed miserably.
ShernDog said:
I followed all the instructions to use multiboot and I got the z999 touchwiz rom on there but then it wouldn't "find" my CM rom that was already on there so I ended up formatting and having no OS, so I tried to sideload but the multiboot stuff messed it up so I'm using ODIN to go back to stock >.> this has failed miserably.
Click to expand...
Click to collapse
The multi boot recovery won't "find" your CM ROM - it will always be the "internal" ROM. Multi boot will only show secondary ROMs in the multi boot menu. Anytime you want to boot CM, just boot the internal ROM.
Give me some time and I'll do a video on how to set up multiple ROMs.
Sent from my SGH-T999 using XDA Free mobile app
Bass_Man25 said:
The multi boot recovery won't "find" your CM ROM - it will always be the "internal" ROM. Multi boot will only show secondary ROMs in the multi boot menu. Anytime you want to boot CM, just boot the internal ROM.
Give me some time and I'll do a video on how to set up multiple ROMs.
Sent from my SGH-T999 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you! I'm gonna try it again today and see how it goes. Maybe I got confused because when I rebooted the phone it booted TW no matter what and I couldn't get it to boot into CM...there was no option to boot internal or whatever...
@Bass_Man25 I finally got it working!
I couldn't install it on the internal storage directory. So I ADB pushed the files to the /tmp folder and installed it off that and I finally have it working!
ShernDog said:
@Bass_Man25 I finally got it working!
I couldn't install it on the internal storage directory. So I ADB pushed the files to the /tmp folder and installed it off that and I finally have it working!
Click to expand...
Click to collapse
Awesome. Glad to hear.
...and I just finished the video. LOL! :silly:
https://www.youtube.com/watch?v=rSYkSFbDguA
Bass_Man25 said:
Awesome. Glad to hear.
...and I just finished the video. LOL! :silly:
https://www.youtube.com/watch?v=rSYkSFbDguA
Click to expand...
Click to collapse
You're so nice thank you so much I will use that video because I hardly know what I'm doing still but I got it working somehow xD
Many thanks!
Edit:
Wow your video explained everything, it is much clearer now!
@Bass_Man25
Would it be possible for me to use a 4.3+ ROM using multiboot? I have the old boot loader or whatever that came with 4.1.2 along with those modems etc.
If it's possible to run a 4.4.4 aosp ROM on the old boot loader how come you can't run newer versions of TW? If there is a ROM I can use along 4.1.2 that'd be nice.
TW roms have Knox.
ShernDog said:
@Bass_Man25
Would it be possible for me to use a 4.3+ ROM using multiboot? I have the old boot loader or whatever that came with 4.1.2 along with those modems etc.
If it's possible to run a 4.4.4 aosp ROM on the old boot loader how come you can't run newer versions of TW? If there is a ROM I can use along 4.1.2 that'd be nice.
Click to expand...
Click to collapse
To be honest, I don't know. From what I've read, some of the 4.3 ROMS don't play nicely with MultiBoot. I haven't given it a try yet. If you're willing to give it try, please let me know what you find. The good new is, if you try it as a secondary ROM and it doesn't work, you can just delete it.

Categories

Resources