So ive gone ahead rooted my P935 many times now quite simple to do. The question is its a Telus phone i'm with rogers, when i flash the v10f kdz i get origninal GB korean rom fully unlocked phone shows using rogers network. When then doing nitro hd unbrick guide and if i only DD the system.img file to install the att version p930 then do the battery pull factory reset my phone still is network unlocked. What i'm tryin to find out is which .img files baseband firmware etc would control this network lock, since when i tried to flash H!ONO v20c P930 cmw flashable ics leak my phone became network locked again. Ijust cant seem to straighten it all out , information overload .
That's very strange, flashing ROMs should not affect network lock. I'm using Bell P930 on Fido, I've flashed AT&T leak and Bell official ICS and neither have re-locked the phone. As long as the IMEI remains unchanged you should be able to use the original unlock code you received to unlock the phone again.
jekostas said:
That's very strange, flashing ROMs should not affect network lock. I'm using Bell P930 on Fido, I've flashed AT&T leak and Bell official ICS and neither have re-locked the phone. As long as the IMEI remains unchanged you should be able to use the original unlock code you received to unlock the phone again.
Click to expand...
Click to collapse
Interesting indeed would it be the v10f .kdz korean somehow. And heres the thing I have recieved no unlock code to unlock. And now am back to running the CM9.1 unlocked working on Rogers Network .
Aha! I figured it out. CM has your Rogers APN preconfigured. The official roms would not lol. I don't know why the SU640 rom was letting you connect. It really shouldn't because your firmware and baseband should be incorrect if you flash it. Anyway, APN has nothing to do with your phone being locked or not
w0095157, are you certain your phone was never carrier unlocked by someone? Did you purchase it brand new in box from a store?
drumist said:
w0095157, are you certain your phone was never carrier unlocked by someone? Did you purchase it brand new in box from a store?
Click to expand...
Click to collapse
brand new in box i swear, telus store,. must be a fluke. but it works id like to find more information on different radios modems, which may change service for me, but i was comparing this to what iphone 4 service was saying side b y side.
Yeah, that makes more sense. Unlock codes are $2 off of eBay, it's worth it just to make sure you don't have any hassles switching between ROMs.
Does LTE work on Rogers when using the Bell unlocked version (P930)?
I know you have to get an LTE Sim card and an LTE enabled plan, but before i buy on eBay and update my plan, i was wondering if the LTE band works on Rogers even if it is a Bell phone.
Yes, i have LTE in my area.
Cheers!
j1paque said:
Does LTE work on Rogers when using the Bell unlocked version (P930)?
I know you have to get an LTE Sim card and an LTE enabled plan, but before i buy on eBay and update my plan, i was wondering if the LTE band works on Rogers even if it is a Bell phone.
Yes, i have LTE in my area.
Cheers!
Click to expand...
Click to collapse
I don't live in Canada, but from what I'm able to find online, Rogers and Bell are using compatible LTE frequencies so it should work just fine.
It works!!!
w0095157 said:
So ive gone ahead rooted my P935 many times now quite simple to do....
Click to expand...
Click to collapse
:laugh:
So after trying million and 1 things I made it work! Baseband and firmware go together and I thought they contain the SIM/network lock so i tried changing them, but apparently all the versions i tried were locked too.... so since the Korean version is with unlocked SIM, why not change directly from it to Cyanogen build ??? Because the wifi is not working!!! and since i did not manage to fine how to install in while offline (CM or Clockworkmod) i flashed from the Korean version just the system.img and voila! I have unlocked SIM with working WIFI ... so putting CM after this was a breeze!
so:
1. flash to Korean V10F_00.kdz
2. root the phone
3.adb shell
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p27
should have unlocked SIM + everything else working on the ATT version which you can now install Clockworkmod and go for Cyanogen mod of your choice. i did cm-10-20121105-NIGHTLY-p930.zip - works great!
I have a p930 with at&t permanent locked network, I discovered too that the baseband of the korean version is unlocked, I made a thread about this but nobody commented or cared i think lol, you can install any rom you want but remove the baseband of the rom before install.
Dreven said:
:laugh:
So after trying million and 1 things I made it work! Baseband and firmware go together and I thought they contain the SIM/network lock so i tried changing them, but apparently all the versions i tried were locked too.... so since the Korean version is with unlocked SIM, why not change directly from it to Cyanogen build ??? Because the wifi is not working!!! and since i did not manage to fine how to install in while offline (CM or Clockworkmod) i flashed from the Korean version just the system.img and voila! I have unlocked SIM with working WIFI ... so putting CM after this was a breeze!
so:
1. flash to Korean V10F_00.kdz
2. root the phone
3.adb shell
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p27
should have unlocked SIM + everything else working on the ATT version which you can now install Clockworkmod and go for Cyanogen mod of your choice. i did cm-10-20121105-NIGHTLY-p930.zip - works great!
Click to expand...
Click to collapse
Ok I have a similar problem with an at&t Lp 930, did the unbrick guide to sim unlock with the korean baseband. While in the koream ROM sim was succesfully unlocked. But after following the guide, flashing to AT&T Gingerbread and installing ClockWork Mod, I flashed it to HO!NO! AT&T ICS CWM Flashable ROM once in ICS, I lost Sim Unlock and was back to: Network Locked on Phone.
So what your saying is to basically only flash the system.img after the korean ROM is on the phone and ignore the other images, then after flash to desired ROM with CWM?
And if so, if I flashed to HO!NO! At&t flash, would I still have Locked Network?
Thank You
vagrant00 said:
Ok I have a similar problem with an at&t Lp 930, did the unbrick guide to sim unlock with the korean baseband. While in the koream ROM sim was succesfully unlocked. But after following the guide, flashing to AT&T Gingerbread and installing ClockWork Mod, I flashed it to HO!NO! AT&T ICS CWM Flashable ROM once in ICS, I lost Sim Unlock and was back to: Network Locked on Phone.
So what your saying is to basically only flash the system.img after the korean ROM is on the phone and ignore the other images, then after flash to desired ROM with CWM?
And if so, if I flashed to HO!NO! At&t flash, would I still have Locked Network?
Thank You
Click to expand...
Click to collapse
replace everything but the baseband, that is how I did
Hi guys, still very stuck with my E988 since flashing CM 10.2. And I can't get it back to stock for some reason.
But question is, Can I flash a E980 radio onto my E988 and will that help me pick up some of the carriers I once had in Canada? e.g. Virgin Mobile.
Thanks
edit: I flashed the e980 radio and the phone just hung there on the LG boot screen. ...
Hi guys,
I had my Note 2 on Koodo network for less than a year. Recently I unlocked it and sold it to a friend. My friend is on Videotron network and the phone shows the signal with an R like if my friend was roaming however it works properly. I also tried switching the network manually but it doesn't want to connect to Videotron. Is there something that I need to flash such as modem maybe ? It's running on Slimkat latest stable version.
I've recently upgraded to CM11 for d2lte from stock, and can't connect to mobile data network. Tried flashing the T999UVUENC2 baseband for the device, but it still isn't working. I'm wondering if there's a conflict between the networks? Does it need to be "re-unlocked" or anything?
I have the lg g3 t-mobile version. I recently bought it off eBay and im located within the UK meaning i will be using a UK network. For some reason on stock it has no problem connecting to the network however on any custom rom i have tried (one was cm13 nightly , the other being resurrection) it says 'cannot connect to the network please try again later) . Any help would be much appreciated
joe.savage said:
I have the lg g3 t-mobile version. I recently bought it off eBay and im located within the UK meaning i will be using a UK network. For some reason on stock it has no problem connecting to the network however on any custom rom i have tried (one was cm13 nightly , the other being resurrection) it says 'cannot connect to the network please try again later) . Any help would be much appreciated
Click to expand...
Click to collapse
Try this, flash or restore your stock ROM, and check IMEI. If it displays 0, then i guess thats the reason why.