[Q] OTG detected in recovery mode but not when its switched on - Nexus 7 (2013) Q&A

Hi guys,
I bought a new OTG cable and have tried a lot of thing on my nexus 7(2013) for it to detect the cable and flash drive.I tried stickmount,many OTG troubleshooters(which show a tick in front of the OTG detected).But was unable to see the files in my flash drive.I have unlocked bootloader and recovery mode and have also rooted my device and was using elementalx but I restored it to the previous state(with stock kernel).The point is that I am able to see my flash drive files in the file explorer in recovery mode but am unable to see it when my nexus is switched on.It doesn't show any notification when I connect my OTG to the Nexus.Can anybody help me with this?
Note: I am using kitkat (4.4.2)

Solution to the problem
Hey guys,
nobody replied
but I found the solution myself
It wasnt working because I was using ElementalX kernel
When I restored it to the previous version (Stock Kernel) and installed stickmount it detected it.
So if anybody needs any help regarding this post me a message.
Also I have confirmed that Mouse and keyboard are also working
So the basic process is you need to unlock bootloader,Root your device and install stickmount and also a filemanager for browsing your Flash drive.:good::laugh:
feeling happy and satisfied as of now.

Related

Lost MTP mode usb support

yesterday i rooted my s4 mini (Stock Kitkat 4.4.2) using CF-Auto root method.
But now i observed that mtp mode is not working.........i tried everything like, reinstalling every single pc drivers even kies, also i unrooted and flashed to totally official firmware again using odin........but still my problem is not solved.......plzz help me guys
also my data cable is fine...........it starts charging but my drive is not shown in my computer.
i tried on different laptops also win7/8

I need and android 4x update ZIP (please read carefully)

Hi All
I have An ace 2 which I thinks a cracking phone but am unable to flash root etc as it has to be done via odin!!! And the problem is the USB seems damaged somehow as no pc or laptop will recognise it. It Charges fine but thats it....
Now I have notice that in the stock recovery it says flash update so am hoping that someone will be able to point me in the right direction of an update to stock android 4 or a rooted update file so can really start to use the phone again...
please help..
regards
Lohtse

S6 edge dead After ROM Flash fail

Hi everyone,
I have a big Problem With my S6 Edge, After installing a ROM Which failed, my S6 Has a bootloop, just See Samsung Logo, Nothing else.
Bootloader and everything has status:"Custom".
My biggest problem is, that the s6 Can Not be connected anymore to the Pc.
It's charging normally, but not connecting to the pc.
If the Device is in Download Mode, Computer does Not recognize the Samsung.
Do I have any possibility to get It working again? - like Samsung Pro Tool?
Thanks in advance!
Don't think there is a solution for your phone. There are many in your situation with no solution. But if you do find one please post back, it may help someone else.
Pp.
Is now there any possibility to get access to my PC?
Has anybody a solution?
Try flashing ozop rom on twrp and freeing up space with its file explorer
Hi
how Can I Flash it?
My Computer doesn't recognize the s6 on the USB Port. I Can gibt into download Mode but no connection to pc.
I can probably help you
I might have solution to fix your phone. Text me 7609156486 No matter what you did, the phone should still be recognized in download mode.
Odin recognized mine just flashed the stock firmware and went from there . Everything is all good now.
Hi everyone,
i have now exchanged the Dockconnector, but the problem that it would not be recognized from the PC is still there. @hjkjohn: I wrote you a PM, can you please help me?

[HELP] Cannot root my G3/D855

Hey guys, just want to root my LG G3 (never rooted before) these day but failed for many ways. But computer said the MTP is not working while I entered download mode (code 10 error). I have tried a lot of way to solve the problem but still not success. Mine is in 5.0 with software version V21A. Someone told me V21A is unable to root. Is there any solution to it? Wanna downgrade back to kitkat cuz 5.0 drains battery in really a short period of time.
Hi, be sure to install the right mtp drivers for your phone. Do a quick web search on that. Also, disable any antivirus on your phone and make sure that you use the right usb cable. Some usb cables are not designed for data transfer - just for charging. The stock cable should work.

(Solved) Fastboot Devices Shows as Question Mark (?????? Fastboot)

Hello everyone,
So I was just finished flashing MIUI 12 official recovery rom when I found out that I have an issue where the Region is set to China. When I'm about to flash the Region Fix Patch, I encounter another problem where the custom recovery i used to have was replaced by Xiaomi stock recovery.
The biggest problem occurred when I'm about to flash custom recovery. As I typed in Fastboot Devices command, my device ID shows up as bunch of question mark (?????? Fastboot) and I can't flash or boot my device into custom recovery
I have tried toggling USB Debugging on and off, revoking USB Debugging, reinstalling USB driver on my PC, as well as switching the cable I used but none of them seems to fix the problem.
Does anyone ever encounter the same problem as mine? How can you work around this problem and able to flash recovery again? Thank you
I was coming from Lineage OS 18.1 before flashing MIUI 12. Please help me get
SOLVED. I switched to a different PC and it worked flawlessly
Bro same problem I m facing now ....... I m unable to lock bootloader .....during fastboot I face same isuue(????????)..... Bro do uh get the solution of this problem please reply

Categories

Resources