Hi All,
I just used kindle fire utility to root my Fire. I installed ClockworkMod Recovery (this is what i use on my galaxy nexus). I then wiped data, cache, and davlink and installed CM9 Reloaded 1.2h. My fire then went into a boot loop where the kindle fire logo came up for 3 secs, then turned off, repeat. I then unplugged from my comp and tried again. now the logo comes up for 3 secs then goes to black screen. but i think the kindle is on bc when i plug into my comp it makes the usb connected sound. battery is fully charged. not sure what else to do. cant boot into recovery bc i cant connect to kindle fire utility...
any ideas?
-Thanks
bobojones said:
Hi All,
I just used kindle fire utility to root my Fire. I installed ClockworkMod Recovery (this is what i use on my galaxy nexus). I then wiped data, cache, and davlink and installed CM9 Reloaded 1.2h. My fire then went into a boot loop where the kindle fire logo came up for 3 secs, then turned off, repeat. I then unplugged from my comp and tried again. now the logo comes up for 3 secs then goes to black screen. but i think the kindle is on bc when i plug into my comp it makes the usb connected sound. battery is fully charged. not sure what else to do. cant boot into recovery bc i cant connect to kindle fire utility...
any ideas?
-Thanks
Click to expand...
Click to collapse
Read all posts for the ROM before installation!
Code:
Kernel 3.0 (v1.2H) - Bugs:
- Only flash in TWRP
- Black screen for awhile on boot, wait it out
- Notification graphic glitch (my error, being fixed in v1.3 and v1.3H)
- Wifi - Works once; when you disconnect, you have to reboot to reconnect
- Sometimes weird bars appear on the screen (not too noticeable)
- Can't mount storage when not in TWRP
whoops...
doh! anyway to recover? if not no biggie i have a BB warennty ill run over and get a new one and do it right this time.... im retarded... thanks for the info!
bobojones said:
doh! anyway to recover? if not no biggie i have a BB warennty ill run over and get a new one and do it right this time.... im retarded... thanks for the info!
Click to expand...
Click to collapse
That kind of attitude is what makes warranties more expensive for everybody and forces manufacturers to lock down their bootloaders so modifying devices is near impossible.
If you didn't install FIREFIREFIRE alongside CWMR, then you need to buy a factory cable (search for it) so you can get the device into fastboot mode. Then you can flash TWRP and install the ROM you want.
I'm sure you'll be going to Best Buy anyway.
You are correct sir! To bb i go!
Sent from my Galaxy Nexus using Tapatalk 2
Hi all, today I used cw to load a screen rotation mod from Calkulin.... Everything seemed fine after that so I tired to boot into clockwork again to do a backup and it brings up a screen with a green android and under that it says "Downloading... Do not shut off device" It just hangs on that screen until I reboot the phone!
Any ideas what I can do to fix this?
Thanks in advance,
Mike
post in the right forum. This is the original epic. The one with a keyboard.
Sent From My Toro+ via RED Tapatalk
Hi Guys
So, not so long ago I got my first Android phone, after i just bought nexus 7 and fell completely head over heels in love with this OS.
so when i got my HTC One V and saw the OS i was pretty disapointed, and decided to update the ROM.
i used this "w.w.w.android.gs/update-gsm-htc-one-v-aokp-jelly-bean" guide and everything went fine, until i rebooted to recovery.
Then i get this image of my phone and 2 green arrows pointing in a circle (didn't know how to say this ) and then that disappears and another screen with an image of a phone, and a red triangle and an exclamation mark inside of the triangle. and then the phone rebooted and showed the white HTC screen and red text underneath saying "this build belongs to HTC......" and then it resets but always shows the same screen.
I tried doing a Factory reset in Bootloader, but it always shows that HTC screen and red text.
i don't know what to do, i hope you guys have some answers, i certainly don't
This happened to me before too.. try to turn it on. If you made a backup like your supposed to and haven't flashed a kernal hold power until it stops blinking then hold vol down and then go into recovery and wipe data/facreset and wipe cache/dalvik and then install your backup and reboot.
Sent from my HTC One V using xda app-developers app
---------- Post added at 03:42 AM ---------- Previous post was at 03:36 AM ----------
I think it was because you don't have a recovery. I don't think you flashed it properly try again. That was my problem :thumbup:
I think
Sent from my HTC One V using xda app-developers app
Krizzikagl said:
Hi Guys
So, not so long ago I got my first Android phone, after i just bought nexus 7 and fell completely head over heels in love with this OS.
so when i got my HTC One V and saw the OS i was pretty disapointed, and decided to update the ROM.
i used this "w.w.w.android.gs/update-gsm-htc-one-v-aokp-jelly-bean" guide and everything went fine, until i rebooted to recovery.
Then i get this image of my phone and 2 green arrows pointing in a circle (didn't know how to say this ) and then that disappears and another screen with an image of a phone, and a red triangle and an exclamation mark inside of the triangle. and then the phone rebooted and showed the white HTC screen and red text underneath saying "this build belongs to HTC......" and then it resets but always shows the same screen.
I tried doing a Factory reset in Bootloader, but it always shows that HTC screen and red text.
i don't know what to do, i hope you guys have some answers, i certainly don't
Click to expand...
Click to collapse
when the red triangle appears with exclamation mark hold the volume up button with the power button ...................if u can get through than hit thanks....
Please ask all questions in Q&A. Thread moved there.
Dude u have not flashed a Custom recovery.... after the red triangle appears, press vol up+ power then u will enter stock recovery...u need to flash a custom recovery like Clockworkmod...the screen with red letters is normal...it shows that u are entering the recovery....or that u have flashed custom firmware or a custom kernel...hope i helped...
Sent from my One V using xda app-developers app
update
okay guys, i installed cwm 6.0.1.5 and tried it again, and everything went fine.but after the reboot, the screen goes black, and then just shows the white HTC screen and red text, and then just goes black again, and then White HTC screen and keeps switching i've been without a phone for 2 days now, and it's killing me
Krizzikagl said:
okay guys, i installed cwm 6.0.1.5 and tried it again, and everything went fine.but after the reboot, the screen goes black, and then just shows the white HTC screen and red text, and then just goes black again, and then White HTC screen and keeps switching i've been without a phone for 2 days now, and it's killing me
Click to expand...
Click to collapse
download a cm10 primou ROM/gapps/ to your sd card then downlad the boot.IMG on your computer. Go into recovery andflash gapps and the ROM.. then hold power and when it goes off hold down and you should go into boot loader. Then select fast boot. Go onto your computer and go to the cmd prmpt and type fastboot flash boot boot.IMG and them reboot. Depending on the kernel/boot.IMG you may need to flash the zip for it too.
Sent from my HTC One V using xda app-developers app
thanks guys
Thank you XxlemonxX i gave up on that AOKP build, and went for CM10 just finished flashing it as you posted this
now everything works as planned, I'm such a sucker for Jelly Bean
Krizzikagl said:
Thank you XxlemonxX i gave up on that AOKP build, and went for CM10 just finished flashing it as you posted this
now everything works as planned, I'm such a sucker for Jelly Bean
Click to expand...
Click to collapse
Welcome glad I could help
Sent from my HTC One V using xda app-developers app
I'm using an HTC One X.
Originally I installed a rooted app that made my phone go into a black screen and wouldn't boot up, and yet still I am able to see the "HTC quitly Brilliant" screen.
I decided to just reinstall the OS/ ROM.
I booted into power down and power button ( Bad english, sorry really frustrated ) and then I tried to install CWM but every time I attempt to restart the phone it just sits on the HOX quietly brilliant screen.
Any help would be much appreciated
P.S
Got recovery mod to work with TWRP, stupid me wiped everything...
Crypto66 said:
I'm using an HTC One X.
Originally I installed a rooted app that made my phone go into a black screen and wouldn't boot up, and yet still I am able to see the "HTC quitly Brilliant" screen.
I decided to just reinstall the OS/ ROM.
I booted into power down and power button ( Bad english, sorry really frustrated ) and then I tried to install CWM but every time I attempt to restart the phone it just sits on the HOX quietly brilliant screen.
Any help would be much appreciated
P.S
Got recovery mod to work with TWRP, stupid me wiped everything...
Click to expand...
Click to collapse
Have you been through the guides / tutorials?
Hey,
iam not a native speaker so excuse my gramma and some bad words.
I got the following problem:
I've already rooted my Kinde Fire 2 and got installed TWRP and Cyanogenmod. Now i want sell my Kinde Fire 2 and need to get the original Rom wird the original Bootlader. Everything is fine with adb, the Devices is listed but when iam trying to boot in the Fastboot Mode i get only a black screen and nothing is happening, even the LED is not lightning.
When i start the Kindle Fire with the button, its booting normaly. Whats my mistake? Bad Factory Cable or is something wrong?
Thanks for help.