Related
So how do we change apn? I'm a tmo us user thanks!
Sent from my HTC Vision using XDA App
Settings>Wireless>Mobile Network>APN menu add apn...and your in the wrong sub forum...post in general or you'll get people upset
Sent from my HTC DesireZed GingrbreadiZed
G1rome said:
So how do we change apn? I'm a tmo us user thanks!
Click to expand...
Click to collapse
APN settings are located under Settings->Wireless & networks->Mobile networks->Access Point Names. Then hit the menu button to add your new APN (though I thought the T-Mobile one is already set up for you by default on a G2).
And just FYI, this should go in the Q&A section, not the dev section.
Hello, I am running Cyanogenmod 10.1 RC1 and when I send an MMS by clicking the paper clip symbol it says sending and stays like that for a while then fails. Please help!!
EDIT: I can send SMSs just not MMSs
TimeAndroid said:
Hello, I am running Cyanogenmod 10.1 RC1 and when I send an MMS by clicking the paper clip symbol it says sending and stays like that for a while then fails. Please help!!
Click to expand...
Click to collapse
Verify you have your imei intact and check your apn settings are correct.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Verify you have your imei intact and check your apn settings are correct.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
How do I check those?
TimeAndroid said:
How do I check those?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33060276
Those are the stock apn settings for each carrier.
Settings > more> mobile networks > access point names.
To check imei.
Settings > about phone> status> imei (anything other than "0" is good)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
http://forum.xda-developers.com/showthread.php?p=33060276
Those are the stock apn settings for each carrier.
Settings > more> mobile networks > access point names.
To check imei.
Settings > about phone> status> imei (anything other than "0" is good)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
In one of the things I was searching, a Bell website came up and told me to also set "MMS protocol: WAP 2.0". Do I need to do that?
KorGuy123 said:
http://forum.xda-developers.com/showthread.php?p=33060276
Those are the stock apn settings for each carrier.
Settings > more> mobile networks > access point names.
To check imei.
Settings > about phone> status> imei (anything other than "0" is good)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Still won't send. What network mode should I have? I am currently using GSM/WCDMA preferred. I have two other options:
LTE/WCDMA
LTA/GSM/WCDMA
By the way, I prefer to use 3G because LTE drains my battery I heard. And I can't use 2G because the signal completely disappears.
TimeAndroid said:
Still won't send. What network mode should I have? I am currently using GSM/WCDMA preferred. I have two other options:
LTE/WCDMA
LTA/GSM/WCDMA
By the way, I prefer to use 3G because LTE drains my battery I heard. And I can't use 2G because the signal completely disappears.
Click to expand...
Click to collapse
Select lte/gsm/wcdma and try that. Worry about disabling lte after you can send a text.
Are you using the stock mms or a third party app?
Some third party apps don't play nicely with some Roms
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Select lte/gsm/wcdma and try that. Worry about disabling lte after you can send a text.
Are you using the stock mms or a third party app?
Some third party apps don't play nicely with some Roms
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I am using the Messaging app that comes with Cyanogenmod. (Green speech bubble with a smiley face)
KorGuy123 said:
Select lte/gsm/wcdma and try that. Worry about disabling lte after you can send a text.
Are you using the stock mms or a third party app?
Some third party apps don't play nicely with some Roms
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Also, it is still not working, Even though I change it to that, it just says 3G
TimeAndroid said:
Also, it is still not working, Even though I change it to that, it just says 3G
Click to expand...
Click to collapse
when changing apns or network mode, it helps to reboot after making the selection. give that a shot if you hadnt already.
xBeerdroiDx said:
when changing apns or network mode, it helps to reboot after making the selection. give that a shot if you hadnt already.
Click to expand...
Click to collapse
Still not working.
TimeAndroid said:
Still not working.
Click to expand...
Click to collapse
Free thanks there....
With this problem I have found that I have had to completely delete the APN and then add it back in and reboot. Delete, add it back in manually and then reboot.
You might have to reboot between deleting and re-adding.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
galakanokis said:
Free thanks there....
With this problem I have found that I have had to completely delete the APN and then add it back in and reboot. Delete, add it back in manually and then reboot.
You might have to reboot between deleting and re-adding.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I have tried deleting then rebooting but have not deleted then rebooted then added. I'll try it and tell you the results. By the way, thanks to you too.
TimeAndroid said:
I have tried deleting then rebooting but have not deleted then rebooted then added. I'll try it and tell you the results. By the way, thanks to you too.
Click to expand...
Click to collapse
I have one labeled "Bell Flex"
APN: inet.bell.ca
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: Same as "Bell" APN
MMS Port: Not set
Can I delete that one?
Not familiar with Bell APN settings but I'm sure they can be googled. I deleted all the APN's in my phone and only added then one I needed.
I believe you can restore defaults at any point as well.
G man
galakanokis said:
Not familiar with Bell APN settings but I'm sure they can be googled. I deleted all the APN's in my phone and only added then one I needed.
I believe you can restore defaults at any point as well.
G man
Click to expand...
Click to collapse
Thanks again.
TimeAndroid said:
Thanks again.
Click to expand...
Click to collapse
Hopefully that works for you. I've had to do this going back to my captivate days and again on my S3 recently.
G Man
galakanokis said:
Hopefully that works for you. I've had to do this going back to my captivate days and again on my S3 recently.
G Man
Click to expand...
Click to collapse
Still did not work. I noticed when I press the MMS there is no subject.
KorGuy123 said:
Select lte/gsm/wcdma and try that. Worry about disabling lte after you can send a text.
Are you using the stock mms or a third party app?
Some third party apps don't play nicely with some Roms
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Omg! When I did that It said 4G and I completely lost signal.
TimeAndroid said:
Omg! When I did that It said 4G and I completely lost signal.
Click to expand...
Click to collapse
Interesting... that makes zero sense.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Has anyone gotten any openvpn client to work on the note 3 using t-mobile data? I can connect via wifi and thru tethering my laptop to my note 3 but not on note 3 with data on 4g
Sent from my SM-N900T using Tapatalk
Works fine for me, I use it every day. What VPN app do you use?
Sent from my SM-N9005 using xda app-developers app
Weird, I tried openvpn connect and openvpn for Android. Using tun connection, non standard port tho and my certs are in the config... What is your setup like?
Sent from my SM-N900T using Tapatalk
I use OpenVPN Settings with a tap connection, standard port, TCP protocol (though udp worked over 4g, it was my work's wifi that blocks udp so I switched to tcp). Phone takes an address on my router where the server's hosted and all is good.
Im using open vpn over data as we speak. Air Vpn is my provider.
Sent from my SM-N9005 using xda app-developers app
Gotta add, "admin" without parenthesis to the apn type and also change to ipv4/ipv6
Bravo!
Amd4life said:
Gotta add, "admin" without parenthesis to the apn type and also change to ipv4/ipv6
Click to expand...
Click to collapse
Amd4life said:
Gotta add, "admin" without parenthesis to the apn type and also change to ipv4/ipv6
Click to expand...
Click to collapse
Where do I make these changes and how?
Do I create a new apn? With same or different settings?
Nvm, I was being lazy. .. so I created a new apn and copied all the settings over and added admin in and set to ipv4/ipv6 and it now works! Thank you so much!
Now any idea why admin has to be added?
Sent from my SM-N900T using xda app-developers app
When you created a new APN are you referring to making one from your phone's Settings -> Connections -> More Networks -> VPN?
Or were you referring to doing all this in OpenVPN Connect App?
The reason I ask is because if done within the phone under settings there is only:
PPTP (horrible as we know),
L2TP/IPSec PSK,
L2TP/IPSec RSA,
IPSec Xauth PSK,
IPSec Xauth RSA,
IPSec Hybrid RSA.
Please clarify as my VPN all of a sudden stopped working (not connecting) on mobile data...only connects on Wifi....it's frustrating.
Thanks.
c-pimp said:
Where do I make these changes and how?
Do I create a new apn? With same or different settings?
Nvm, I was being lazy. .. so I created a new apn and copied all the settings over and added admin in and set to ipv4/ipv6 and it now works! Thank you so much!
Now any idea why admin has to be added?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
More network settings . Mobile networks . Access Point Names
Create a new entry, make the settings same as before, but add admin in with supl and whatnot as mentioned above
Sent from my SM-N900T using xda app-developers app
do you have to be rooted to use the openvpn client in the configuration you guys are talking about?
AC
Sent from my SM-N900T using Tapatalk
I recently unlocked for domestic use and am using my Sprint Edge+ on T-Mobile.
However, when I look for my APN, there are none selected.
Does anyone know how I can view my current APN (hidden)?
I know there is a SQL app i can view the database file with but how will know which one my phone is currently using.
Please help.
It's not hidden, you need to add it under settings
Sent from my SM-G928P using Tapatalk
Can we bypass Sprints Proxy locations by editing these files.
/data/data/com.sec.sprextension/files/mmhttppd.prop
/data/data/0/com.sec.sprextension/files/mmhttppd.prop
/data/data/com.sec.sprextension/files/mmrtsp.prop
/data/data/0/com.sec.sprextension/files/mmrtsp.prop
I'm not sure if you can by editing those files but with your MSL number you could just replace the strings with 0 (for ports) and 0.0.0.0 (for IP addresses / URLs)
Sterist said:
I'm not sure if you can by editing those files but with your MSL number you could just replace the strings with 0 (for ports) and 0.0.0.0 (for IP addresses / URLs)
Click to expand...
Click to collapse
##DATA#
Edit multimedia...
jhill110 said:
##DATA#
Edit multimedia...
Click to expand...
Click to collapse
if that's MM how'd you get the status bar themed?
edit: I see now what the OP is talking about, multimedia is missing from ##data# on MM
Im not able to do that in Marshmallow.
Sent from my SM-N910P using XDA-Developers mobile app
jhill110 said:
##DATA#
Edit multimedia...
Click to expand...
Click to collapse
Proxy ports only have to be, 0
---------- Post added at 09:42 AM ---------- Previous post was at 09:35 AM ----------
I'm assuming editing these is the same, but I'm prob wrong.
Got it, thanks
Sent from my SM-N910P using XDA-Developers mobile app
Also I think I'm wrong cause when u update, prl and profile, these reset to default.
I think MMSC is for MMS... I wouldn't touch it.. lol
Platinum XDA said:
Can we bypass Sprints Proxy locations by editing these files.
/data/data/com.sec.sprextension/files/mmhttppd.prop
/data/data/0/com.sec.sprextension/files/mmhttppd.prop
/data/data/com.sec.sprextension/files/mmrtsp.prop
/data/data/0/com.sec.sprextension/files/mmrtsp.prop
Click to expand...
Click to collapse
I actually figured it out.
thanks to your observation.
I used SQlite editor, and went into Phone Info apk
then in: t_systemproperty find the same proxy addresses and ports.
then change to the respective values as we used to before.
I put 0.0.0.0 for the proxies, and <Not set> for the ports
Sweet, I'm going to do that right away. Thanks
Sent from my SM-N910P using XDA-Developers mobile app
What is the reason for changing the proxy settings? What is the advantages of changing them?
Sent from my SM-N920P using XDA-Developers mobile app
RazingKahne said:
What is the reason for changing the proxy settings? What is the advantages of changing them?
Sent from my SM-N920P using XDA-Developers mobile app
Click to expand...
Click to collapse
When streaming video it removes the proxy as a mediator... if the bandwidth is there it increases and smooths out the data throughput. ..
Sent from my SM-N910P using Tapatalk
ScottieRotten said:
When streaming video it removes the proxy as a mediator... if the bandwidth is there it increases and smooths out the data throughput. ..
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Cool, that's a plus! Thanks!
Sent from my SM-N920P using XDA-Developers mobile app
Has anyone confirmed this is working? When I first jumped to MM I edited the MMSC settings and had problems sending Multimedia Messages when I was connected to any Wifi,. This included group texts as well as receiving those types of messages. I'm not too good at using SQlite and doing all this on my own, so if someone can confirm and help explain how to do it I would Appreciate it. Don't forget to do a Backup!
HunterKiotori said:
Has anyone confirmed this is working? When I first jumped to MM I edited the MMSC settings and had problems sending Multimedia Messages when I was connected to any Wifi,. This included group texts as well as receiving those types of messages. I'm not too good at using SQlite and doing all this on my own, so if someone can confirm and help explain how to do it I would Appreciate it. Don't forget to do a Backup!
Click to expand...
Click to collapse
you shouldn't have done the mmsc settings. that changes the sms and mms sending
i wish i could tell you how to do it but i rather show you thann write it out.
it is simple tho
if you really want to know...ill write it out for you
sunmybun said:
you shouldn't have done the mmsc settings. that changes the sms and mms sending
i wish i could tell you how to do it but i rather show you thann write it out.
it is simple tho
if you really want to know...ill write it out for you
Click to expand...
Click to collapse
If you could I would greatly appreciate it. Don't know how you can show me rather than write it out.
Sent from my SM-N910P using XDA-Developers mobile app
HunterKiotori said:
If you could I would greatly appreciate it. Don't know how you can show me rather than write it out.
Sent from my SM-N910P using XDA-Developers mobile app
Click to expand...
Click to collapse
First buy the sqlite editor by speedsoftware
Then in that app go to Phone Info
Press db_systemproperty
Then press t_systemproperty
Now look for the thingys
Press Edit Record for each of the 4 thingys
And change the values
Hopefully you know what to change and what to change it to
Sent from my SM-N910P using Tapatalk
sunmybun said:
First buy the sqlite editor by speedsoftware
Then in that app go to Phone Info
Press db_systemproperty
Then press t_systemproperty
Now look for the thingys
Press Edit Record for each of the 4 thingys
And change the values
Hopefully you know what to change and what to change it to
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
thanks mate! once I got in I saw exactly what I had to edit. Thanks for the quick tutorial. Another App that I add to my Utility belt.
sunmybun said:
First buy the sqlite editor by speedsoftware
Then in that app go to Phone Info
Press db_systemproperty
Then press t_systemproperty
Now look for the thingys
Press Edit Record for each of the 4 thingys
And change the values
Hopefully you know what to change and what to change it to
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Guys, I'm using N910P with a GSM SIM outside of US.
I've enabled hotspot through various "hacks" present here on XDA, but when I try to connect my PC through my phone, the PC gets stuck at "Obtaining IP Address".
In my opinion, there's something in stock MM ROM that looks for some Sprint IPs (I may be wrong). So, will editing lines in above mentioned post work for me too?