No internet connection after flashing PACMAN - Galaxy Note II Q&A, Help & Troubleshooting

I just flashed PACMAN ROM4.3.1 with SaberMod. But i found the phone cannot use mobile data. Though it can make phone calls and use wifi. I tried to flash the csc and modem for my region but that didnt help.
What can i do now? I dont wanna flash back to the old rom as PACMAN is so good.

boyeooe1218 said:
I just flashed PACMAN ROM4.3.1 with SaberMod. But i found the phone cannot use mobile data. Though it can make phone calls and use wifi. I tried to flash the csc and modem for my region but that didnt help.
What can i do now? I dont wanna flash back to the old rom as PACMAN is so good.
Click to expand...
Click to collapse
Check your APN settings, same thing happened to me.

pwtil said:
Check your APN settings, same thing happened to me.
Click to expand...
Click to collapse
oh yes, it was the apn. thx

pwtil said:
Check your APN settings, same thing happened to me.
Click to expand...
Click to collapse
If not the APN, you can try Dr Ketan's WiFi patch which addresses the WiFi issue that seems to crop up when you upgrade fro the 4.12 bootloader to the 4.3.

Related

Bad signal or No service after flashing

Hi there. My device is a i747 on Virgin Mobile (Bell) in Canada. I have no service, or 1 bar of signal (can't make calls at all).
I flashed CM10 in November. Then just the other day I flashed Synergy. Then switched to Galaxy Mod. (I followed instructions for each flash, wiped everything each time etc. even when not specified in the instructions)
Today I switched to CyanogenMod 10.1, I got stuck in a boot loop. So I reflashed back to a stock root image with Odin (root66.stock_Bell_I747MVLALH1.tar). Now I have no service! I can see one signal bar. Under status it says VIRGIN.
EDIT: Now after I typed that, I reflashed another rooted stock image, I have no service at all and IMEI shows as 0.
EDIT: Since posting I have restored my IMEI, the phone seems to be registered on the network. But still no signal just like before
EDIT: March 16: I have tried flashing modems. Then I restored to the latest actual stock (non-rooted) image from my carrier. Same thing.
Please help me out, thanks
flyingpants said:
Hi there. My device is a i747 on Virgin Mobile (Bell) in Canada. I have no service, or 1 bar of signal (can't make calls at all).
I flashed CM10 in November. Then just the other day I flashed Synergy. Then switched to Galaxy Mod. (I followed instructions for each flash, wiped everything each time etc. even when not specified in the instructions)
Today I switched to CyanogenMod 10.1, I got stuck in a boot loop. So I reflashed back to a stock root image with Odin (root66.stock_Bell_I747MVLALH1.tar). Now I have no service! I can see one signal bar. Under status it says VIRGIN.
EDIT: Now after I typed that, I reflashed another rooted stock image, I have no service at all and IMEI shows as 0.
EDIT: Since posting I have restored my IMEI, the phone seems to be registered on the network. But still no signal just like before
Please help me out, thanks
Click to expand...
Click to collapse
After restoring your imei make sure your apn settings are correct.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
After restoring your imei make sure your apn settings are correct.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hello.
I just travelled by train and it picked up signals, both voice and data. Possibly because i was passing close to a cell tower. But it quickly stopped working whenever the train moved too far from a cell tower.
Then back to no signal at all.
Will check APNs, but I don't think it would start working then stop if it were a configuration issue.
flyingpants said:
Hello.
I just travelled by train and it picked up signals, both voice and data. Possibly because i was passing close to a cell tower. But it quickly stopped working whenever the train moved too far from a cell tower.
Then back to no signal at all.
Will check APNs, but I don't think it would start working then stop if it were a configuration issue.
Click to expand...
Click to collapse
That sounds like a modem issue.
BWolf56 said:
That sounds like a modem issue.
Click to expand...
Click to collapse
Yes, the modem is not working properly. Should I flash another modem or what? Thanks.
APN is set correctly.
flyingpants said:
Yes, the modem is not working properly. Should I flash another modem or what? Thanks.
APN is set correctly.
Click to expand...
Click to collapse
Yeah, sorry wasn't all too clear. I replied in a rush.
Go in the modem thread and look for modems for your carrier and start by flashing their latest.
BWolf56 said:
Yeah, sorry wasn't all too clear. I replied in a rush.
Go in the modem thread and look for modems for your carrier and start by flashing their latest.
Click to expand...
Click to collapse
Hi there, what do you mean by "the modem thread"? I looked around a bit but I cant find it.
flyingpants said:
Hi there, what do you mean by "the modem thread"? I looked around a bit but I cant find it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1831898
BWolf56 said:
http://forum.xda-developers.com/showthread.php?t=1831898
Click to expand...
Click to collapse
I tried the latest modem for i747M from the thread and it didn't work, same stuff is happening. I will keep trying them. Anything else I can try if that doesn't work?
flyingpants said:
I tried the latest modem for i747M from the thread and it didn't work, same stuff is happening. I will keep trying them. Anything else I can try if that doesn't work?
Click to expand...
Click to collapse
I tried about 4-5 so far. Didn't work. It's the same result. I'm not able to make any calls, it either shows 1 bar or No service.
So far I have set APNs, updated IMEI, and reflashed modems. When I get home I'm going to try more stuff.
BWolf56 said:
Yeah, sorry wasn't all too clear. I replied in a rush.
Go in the modem thread and look for modems for your carrier and start by flashing their latest.
Click to expand...
Click to collapse
flyingpants said:
I tried the latest modem for i747M from the thread and it didn't work, same stuff is happening. I will keep trying them. Anything else I can try if that doesn't work?
Click to expand...
Click to collapse
flyingpants said:
I tried about 4-5 so far. Didn't work. It's the same result. I'm not able to make any calls, it either shows 1 bar or No service.
So far I have set APNs, updated IMEI, and reflashed modems. When I get home I'm going to try more stuff.
Click to expand...
Click to collapse
Hi there, I just flashed this file from Samsung-updates.com using Odin. It is 4.1.1 from my carrier.
KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
Then I did a factory reset from inside Touchwiz. What should I try next?
I tried flashing another image: KIES_HOME_I747MVLALE8_I747MOYCALE8_20120523.225040_REV04_user_low_ship.tar.md5
and doing the factory reset code *2767*3855#. Didn't work, still have no signal in general.

My internet data frequently disconnected

Hello,
i am back again with a new problem!
All the previous problems that was mentioned in this forum is GONE. i was a happy owner. Until i got this problem.
so i wanted to try new Modem, just so i can increase my Signal, and right now, my data plan is keep going on and off, and most the time i can't get it connected it.
i did the wipe date /factory reset from the ROM manager, and wipe cache and dalvik. and yet the problem is not solved.
right now, am running cm-10.1-20130304-EXPERIMENTAL
and the Modem am currently running which sometimes works ( I747MVLDLK4 ) am with Rogers, Canada, Edmonton, AB
If anyone helped me out with this, your next coffee is on me! for real!
anyone?
When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.
CZ Eddie said:
When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.
Click to expand...
Click to collapse
Thanks man, i really hope it works! , am gonna try this now.. When i restore to the stock, dose my based band goes to default or shall i manually do that?
just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....
MH_91 said:
just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....
Click to expand...
Click to collapse
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?
hednik said:
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?
Click to expand...
Click to collapse
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.
MH_91 said:
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.
Click to expand...
Click to collapse
What type of fail error?
How are you trying to flash it?
i managed to make my modem into the stock version. However am just getting "E" in my data connection. Reminder am still in STOCK ROM and stock modem now. is that a good sign that i slighty getting everything back??
should i just install the CM 10.1 now and see the results or what you guys recommend?
annnnnnnnnd my " E" is gone.. Beautiful
do you guys think it might be a actual physical sim card issue?
UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!
Try flashing Task's AOKP and see if you have the same issue. Additionally, try deleting the current APNs (access point names) and manually enter the APN settings for your carrier. Could also just be a faulty SIM card as you mentioned.
Sent from my SGH-I747 using xda app-developers app
MH_91 said:
UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!
Click to expand...
Click to collapse
You have your imei still ? I don't see that mentioned.... this sounds like that issue. flashing between TW and Custom it can happen
Thanks guys for the feedback, but i have managed to fix the problem, this post was before i know that i lost my IMEI...
All good now, everything has be resolved.
cheers,

No phone service

I can not get any radio to work to make or receive calls! I flashed everyone out there and still can not make or receive calls. What method can I use do to get it to work? I flashed radio from TWRP with Factory reset, delvik and cache and then flash with no wipe and I just cant get that or any radio to work. I just get AT&T when I do a scan, which I use T-Mobile. When I choose search in settings in mobile networks, still nothing. When I try to use phone, it always says no network avail. and yes I have data box checked off. It just seams lately any Rom I flash after the newest stock, (JB) I have radio issues, can not make or receive calls. I even erased, wiped everything and started from scratch with stock. Phones works fine, but when I try any ROM, no calls, no matter what radio I flash. I must be doing something wrong. I must say, that I flashed many a Roms before and all worked well until now! I even download same radios in case I got a bad download. I can use kernels, such as Tiberius with Stock JB. I Flash a Rom and no radio, no matter what Rom. My version in stock is UVMC6, SGH T-989 phone. (T-Mobile). I know all phones are different and thought maybe something in stock files I might be able to use, but don't know which files. I am not a dev by any means and thought if I could use the stock I have now can work with the any Rom here. I never dirty flash anything, all Roms work that I flash from sd card, just not able to use phone in any Rom at all! I thought maybe I can manually put in APN, but I have no idea were to get address to enter. I am from Delaware if that matters as far as APN. Can anyone give any suggestions of what they did to get radio to work?
Sargeue said:
I can not get any radio to work to make or receive calls! I flashed everyone out there and still can not make or receive calls. What method can I use do to get it to work? I flashed radio from TWRP with Factory reset, delvik and cache and then flash with no wipe and I just cant get that or any radio to work. I just get AT&T when I do a scan, which I use T-Mobile. When I choose search in settings in mobile networks, still nothing. When I try to use phone, it always says no network avail. and yes I have data box checked off. It just seams lately any Rom I flash after the newest stock, (JB) I have radio issues, can not make or receive calls. I even erased, wiped everything and started from scratch with stock. Phones works fine, but when I try any ROM, no calls, no matter what radio I flash. I must be doing something wrong. I must say, that I flashed many a Roms before and all worked well until now! I even download same radios in case I got a bad download. I can use kernels, such as Tiberius with Stock JB. I Flash a Rom and no radio, no matter what Rom. My version in stock is UVMC6, SGH T-989 phone. (T-Mobile). I know all phones are different and thought maybe something in stock files I might be able to use, but don't know which files. I am not a dev by any means and thought if I could use the stock I have now can work with the any Rom here. I never dirty flash anything, all Roms work that I flash from sd card, just not able to use phone in any Rom at all! I thought maybe I can manually put in APN, but I have no idea were to get address to enter. I am from Delaware if that matters as far as APN. Can anyone give any suggestions of what they did to get radio to work?
Click to expand...
Click to collapse
Verify your APN settings are correct. If there isn't a t mobile APN set up than try creating one. Also go to Settings > About Phone > Status and make sure your phone has a valid IMEI number (anything other than 0)
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Verify your APN settings are correct. If there isn't a t mobile APN set up than try creating one. Also go to Settings > About Phone > Status and make sure your phone has a valid IMEI number (anything other than 0)
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks, yeah after all reading and troubleshooting it seems APN is where I have to create and/or edit! I found APN settings on Google and wrote down the settings that is on stock Rom where phone is working and will try it. Thanks for heading me in the right direction.
Sargeue said:
Thanks, yeah after all reading and troubleshooting it seems APN is where I have to create and/or edit! I found APN settings on Google and wrote down the settings that is on stock Rom where phone is working and will try it. Thanks for heading me in the right direction.
Click to expand...
Click to collapse
Glad to help.
Sent from my SGH-I747 using xda app-developers app
I'm in Canada and had same problem with SlimBean ROM (which is my favourite ROM). I flashed phone back to a stock ROM, flashed DARKSIDE.SUPER.WIPE, the ROM, and Gapps with TWRP recovery (in that order) and was back in business.
T989D
TWRP 2.4
SlimBean ROM 3.4
Deacon75 said:
I'm in Canada and had same problem with SlimBean ROM (which is my favourite ROM). I flashed phone back to a stock ROM, flashed DARKSIDE.SUPER.WIPE, the ROM, and Gapps with TWRP recovery (in that order) and was back in business.
T989D
TWRP 2.4
SlimBean ROM 3.4
Click to expand...
Click to collapse
Still no radio, will try your way, thanks!

[PROBLEM] 3G Doesn't Work!

Hello everyone,
I currently have an issue with my arc S (LT18i) where 3G doesn't work anymore on any Sony stock ROM. I am aware that my carrier supports the needed basebands, and I am in an area where my service has 3G with full signals. I have tried the following:
I have switched ROMs from ICS and Gingerbread & tried reflashing, but still 3G doesn't work. I have no problems with 2G however.
Changing kernels didn't help too. I normally use LuPuS, but the problem still remains.
I first thought it was a hardware issue, but then I switched to CyanogenMOD and MIUI, 3G works on both ROMs. So it's not a hardware issue.
I still do not know what the problem is. Can anyone help me out? This problem occured just after I flashed LuPuS kernel, and then returning back to stock kernel. Ever since then 3G doesn't work.
Hope I get a solution. Help is appreciated. Thanks!
Did you flash the correct baseband for the ROM? Each Android version works with a different baseband.
僕のLT18iから送られてきた
popthosegaskets said:
Did you flash the correct baseband for the ROM? Each Android version works with a different baseband.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Never had problems with using various basebands on various ROMs. 64 worked fine on ICS, 77 worked fine on GB. No issues for me.
popthosegaskets said:
Did you flash the correct baseband for the ROM? Each Android version works with a different baseband.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I used what comes in the .FTF itself. I even tried flashing with Sony's official flash tool for unlocked bootloaders. I'll try manually flashing basebands and switch them out to see whether that works.
Someguyfromhell said:
Never had problems with using various basebands on various ROMs. 64 worked fine on ICS, 77 worked fine on GB. No issues for me.
Click to expand...
Click to collapse
Gotta check then.
Had you checked in what mode are you?
2G, 2G/3G Prefered, 3G only
Had you configured the APN Settings? In my phone it doesnt donwload anything from 3G/2G until i register the network.
Or perhaps you didnt do all the wipes and some remanent file is causing the problem.
17th_angel said:
Had you checked in what mode are you?
2G, 2G/3G Prefered, 3G only
Had you configured the APN Settings? In my phone it doesnt donwload anything from 3G/2G until i register the network.
Or perhaps you didnt do all the wipes and some remanent file is causing the problem.
Click to expand...
Click to collapse
Residual files seems to be the problem. I have the correct APNs and correct mode. I should try clearing with fastboot.
GMattZ said:
Residual files seems to be the problem. I have the correct APNs and correct mode. I should try clearing with fastboot.
Click to expand...
Click to collapse
Flash a new kernel and do clean install, wipe everything and flash a ROM.
僕のLT18iから送られてきた
Wiping everything off and flashing a new kernel and again wiping and going back to stock ROM worked.
Thanks for all your support guys!
GMattZ said:
Wiping everything off and flashing a new kernel and again wiping and going back to stock ROM worked.
Thanks for all your support guys!
Click to expand...
Click to collapse
hi ... ihave the same problem .. can u please tell me what have you done exactly ?

[HELP] Couldn't connect to my network although my phone sees it!!

hey everyone, after i updated to B-125 international the device wont connect to my network, always showing no service, although when i search for networks manually the phone sees all the available networks but wont connect to mine, i tried my sim on different phone and it works, aslo i tried different sim and it didnt work, any help with that?
p.s. the imei is present
Turn ON and then OFF AirplaneMode.
iDroidOperatingSystem said:
Turn ON and then OFF AirplaneMode.
Click to expand...
Click to collapse
no luck
Factory reset,wipe all.
Restart your phone and check your providers config.
wipe phone. flash software that worked, dont wipe then and flash b125. worked for me.
Phinity said:
Restart your phone and check your providers config.
Click to expand...
Click to collapse
how?
benna said:
wipe phone. flash software that worked, dont wipe then and flash b125. worked for me.
Click to expand...
Click to collapse
tried that with no luck, i notice that the baseband version remains the same while chnaging firmwares, even when i tried cm,
anyway to change the baseband it might be the fix?
7OOKA said:
tried that with no luck, i notice that the baseband version remains the same while chnaging firmwares, even when i tried cm,
anyway to change the baseband it might be the fix?
Click to expand...
Click to collapse
sure you did an full wipe/

Categories

Resources