Related
Hi,
I have a rooted Sprint GS3, running the stock ROM with just one or two root based apps. Do I need to unroot to accept the OTA update? If so, how do I go about doing that?
TheSapient said:
Hi,
I have a rooted Sprint GS3, running the stock ROM with just one or two root based apps. Do I need to unroot to accept the OTA update? If so, how do I go about doing that?
Click to expand...
Click to collapse
if you would like to run a 4.3 stock ROM, there are a couple in the development section that you can choose from without having to run the 4.3 boot loader that contains KNOX. That way you don't have to go through the unroot process to accept the OTA.
jdelano said:
if you would like to run a 4.3 stock ROM, there are a couple in the development section that you can choose from without having to run the 4.3 boot loader that contains KNOX. That way you don't have to go through the unroot process to accept the OTA.
Click to expand...
Click to collapse
Thanks. I think the preference is to accept the OTA. If we need to unroot, we'll do that if we can figure out how. Sorry for being a little vague. I'm trying to help someone else out.
ok, you can go here Restore to unrooted MD4 follow that and you're good to go
I was stock rooted with clockwork recovery.
Took the OTA without unrooting with no problems at all, just had to re-root when it was done.
dotNETProgrammer said:
I was stock rooted with clockwork recovery.
Took the OTA without unrooting with no problems at all, just had to re-root when it was done.
Click to expand...
Click to collapse
Really? I thought it was always a bad idea with a custom recovery. Maybe we will try it rooted as well. Thanks.
Every other time I've tried it would download, but just wouldn't flash the OTA.
This time, it did. Surprised me.
Re
I got the update notification today when i woke up and when i clicked the restart and install it went to recovery mode, i panicked and clicked reboot (honestly still dont know what to do),
and restarted the phone without updating
I'm running stock 4.1.2 with just 2 root apps (superuser) and tatanium backup, how can i update ?
thanks
mjkubba said:
I got the update notification today when i woke up and when i clicked the restart and install it went to recovery mode, i panicked and clicked reboot (honestly still dont know what to do),
and restarted the phone without updating
I'm running stock 4.1.2 with just 2 root apps (superuser) and tatanium backup, how can i update ?
thanks
Click to expand...
Click to collapse
Relax . You do not have to update. You do not have to lose Root. Check out THIS thread. It will explain a few things to you in detail about Updates, and how to stop the update nag. If you want to update to the latest TW 4.3 Stock Rooted, check out the thread HERE. Just make sure you read, and read again before doing anything. Also make sure to download the correct Rom. There are several versions on the thread.
prboy1969 said:
Relax . You do not have to update. You do not have to lose Root. Check out THIS thread. It will explain a few things to you in detail about Updates, and how to stop the update nag. If you want to update to the latest TW 4.3 Stock Rooted, check out the thread HERE. Just make sure you read, and read again before doing anything. Also make sure to download the correct Rom. There are several versions on the thread.
Click to expand...
Click to collapse
Thanks for the answer.
I actually want to update to stock 4.3, and I was trying to achieve that by getting the OTA update.
And i was wondering if i can still do that?
If I simply can't then I'll just go to CM instead of getting other rooms since I used to have them with my old HTC.
Thanks again
If you want completely Stock Rooted 4.3, it's the second link I posted for you. It's the Stock, Rooted, Factory Rom, with Knox removed. All done by CNexus . Just be sure to read before doing anything. As there are several versions posted. I would highly suggest going this route instead of taking the OTA update. Once you take the OTA you will have Knox, and a different bootloader.
TEAM MiK MikROMs Since 3/13/11
Thanks a lot man, I'm having a problem installing the ROM, I'm getting assert error (status 7) error when trying to install the odexed rom,
I have just updated my CWM to 6.0.4.5
Sorry I cant reply to the thread directly, need 10 posts to be able to do so.
MJ
edit: now it's stuck on boot loop
edit: I downloaded the original recovery rom and installed it from ordin, then updated phone through kies. it's all good now.
Hey guys,
It's my first question on this website so please forgive me if I am too noob-ish with my questions.
So recently I got an OTA update for my Sprint Samsung Galaxy S3 asking me to update from jelly bean 4.1.2 to 4.3 and I did so with no second thought. However, within two weeks of using the new jelly bean version, I am sick of its performance issues, battery life, wifi problems and a host of other annoying things it brought to the table. So I went about looking for advice on several forms on how to improve performance and make my phone usable again.
In the end, I ended up rooting my phone successfully using a thread I found.
I also installed a custom recovery (CWM) so I could flash well-rated custom ROMs. Now, I have a few questions before proceeding since I came across a couple concerns other people expressed on other similar threads......I heard the new 4.3 update came with some kind of new bootloader and Samsung KNOX, and I've read that it could cause problems if I try to downgrade my phone back to the stock ROM (4.1.1) or 4.1.2.
So I have ruled out the option of downgrading my phone given the risk of permanently bricking it.
So my question and concern is.....can I go ahead and flash a custom ROM without bricking my phone? I am thinking about Cyanogenmod 10.2, which is apparently based on jelly bean 4.3. Can I install cyanogenmod 11 (based on 4.4 kitkat) instead of 10.2? What are my risks of flashing a custom ROM through CWM at this point?
Please help, I'm stuck!!! Any help is much appreciated
trilfc said:
Hey guys,
It's my first question on this website so please forgive me if I am too noob-ish with my questions.
So recently I got an OTA update for my Sprint Samsung Galaxy S3 asking me to update from jelly bean 4.1.2 to 4.3 and I did so with no second thought. However, within two weeks of using the new jelly bean version, I am sick of its performance issues, battery life, wifi problems and a host of other annoying things it brought to the table. So I went about looking for advice on several forms on how to improve performance and make my phone usable again.
In the end, I ended up rooting my phone successfully using a thread I found.
I also installed a custom recovery (CWM) so I could flash well-rated custom ROMs. Now, I have a few questions before proceeding since I came across a couple concerns other people expressed on other similar threads......I heard the new 4.3 update came with some kind of new bootloader and Samsung KNOX, and I've read that it could cause problems if I try to downgrade my phone back to the stock ROM (4.1.1) or 4.1.2.
So I have ruled out the option of downgrading my phone given the risk of permanently bricking it.
So my question and concern is.....can I go ahead and flash a custom ROM without bricking my phone? I am thinking about Cyanogenmod 10.2, which is apparently based on jelly bean 4.3. Can I install cyanogenmod 11 (based on 4.4 kitkat) instead of 10.2? What are my risks of flashing a custom ROM through CWM at this point?
Please help, I'm stuck!!! Any help is much appreciated
Click to expand...
Click to collapse
Have you read THIS thread very carefully?
joeyhdownsouth said:
Have you read THIS thread very carefully?
Click to expand...
Click to collapse
Thank you so much man!
My apologies, I never stumbled on that thread but I'm glad you shared it with me
trilfc said:
Thank you so much man!
My apologies, I never stumbled on that thread but I'm glad you shared it with me
Click to expand...
Click to collapse
CNexus should see about getting his thread stickied in the Q&A section. I think it would help alot of folks with KNOX issues. Theres been a ton of repeat questions about KNOX.
RE::
joeyhdownsouth said:
CNexus should see about getting his thread stickied in the Q&A section. I think it would help alot of folks with KNOX issues. Theres been a ton of repeat questions about KNOX.
Click to expand...
Click to collapse
Hey so I have another little question.....if I flash a stock MK3 file at my rooted S3, will I lose root as well as my custom recovery? I can't seem to find a thread on how to reload my stock recovery after installing CWM, Suggestions?
trilfc said:
Hey so I have another little question.....if I flash a stock MK3 file at my rooted S3, will I lose root as well as my custom recovery? I can't seem to find a thread on how to reload my stock recovery after installing CWM, Suggestions?
Click to expand...
Click to collapse
THIS thread may help
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
eletendre84 said:
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
Click to expand...
Click to collapse
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
mentorkyrom said:
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
Click to expand...
Click to collapse
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
eletendre84 said:
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
Click to expand...
Click to collapse
Tethering is available on CM11 just like it was on 10.2; would strongly recommend latest Philz Touch Recovery over either TWRP or CWM though. Although it is based on CWM, it has proven to be pretty much the superior recovery option for flashing any Android build number, plus it is highly customizable.
Philz Touch Recovery
this is how to downgrade
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
smuther22 said:
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
Click to expand...
Click to collapse
Do you realize that this thread hasn't been used in a couple of months? I would assume the author has no more need of advice based on the inactivity. Also, once Knox is installed, it is on the phone to stay. PERIOD. NO DOWNGRADING POSSIBLE VIA ODIN. Custom ROMs of any build are fine via custom recovery, but any attempt to change the bootloader will trigger Knox and brick the phone. Dangerous info to be posting here, especially since someone else who doesn't know better might try this.
I have a VM l710 that came with 4.3. I managed to install ClockworkMod v6.0.4.3 and flashed Slimbean. I had a few issues with Slimbean so I decided that I wanted to go back to stock. But, of course, I forgot to run a back up in CM. I eventually found an OTA update for my phone that was 4.1.2. I installed it and everything works well. Its rooted and I still have CM. I get update notifications every so often but it does not seem to update my phone and now I am stuck at 4.1.2.
Is there a way I can update to 4.3?
Would I be able to find an OTA of 4.3, flash it, and then use knox remover? Or 4.1.2 --> 4.2 --> 4.3 if 4.1 --> 4.3 is too big of a jump?
Sorry if this question has been answered before, I tried google but since I had 4.3 before and now have 4.1.2 I don't want to mess up a bootloader or something.
Thank you
Every custom 4.3 Rom in the development section is Knox free, just flash the one you like.
metalfan78 said:
Every custom 4.3 Rom in the development section is Knox free, just flash the one you like.
Click to expand...
Click to collapse
Thanks. I updated with this ROM.
Everything works well except mobile data. I flashed the recommended modem but it didn't help.
Any recommendations for this?
EDIT: flashed an MK5 modem, everything works now.
DId you update your PRL/Profile? You can also try ##72786# on your dial pad.
[Q&A] [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA U
Q&A for [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA Updates!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA Updates!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can I flash the root666 T999_UVUEMJC (or even the stock) firmware on top of stock T999_UVUENC2 without bricking the phone? I got the latest T999_UVUENC2 OTA update and my wifi won't work anymore . Any help would be appreciated. Thanks
GS3 t999l T999LUVUBNF4 update TowelRoot
hi just unrooted my GS3 and updated via kies to T999LUVUBNF4, went back to towelroot and it says phone is not supported. Does anyone know another quick way to root? Also is anyone else using this update and can tell me how its behaving. appreciate the info
gs3goodtome said:
hi just unrooted my GS3 and updated via kies to T999LUVUBNF4, went back to towelroot and it says phone is not supported. Does anyone know another quick way to root? Also is anyone else using this update and can tell me how its behaving. appreciate the info
Click to expand...
Click to collapse
cf-auto root, or flash SuperSU with custom recovery.
T999LUVUBNF4 Root
Hey, I've been trying to root my S3 running the T999LUVUBNF4 firmware, but I'm having trouble. Towelroot doesn't support it, I haven't seen anything about a Root66, and I've heard mixed reports on CF-auto root. Does anyone know if there is a workable solution yet? How would I go about flashing SuperSU? Thanks.
Okay I've recently just flashed the root66 firmware that gave me supersu and all that.
My question is... Where do i go from here?
How would i proceed to
1) Install TWRP?, which version as well? Is 2.8 d2tmo fine? Can i have some instructions whether i use TWRP manager(goomanager doesn't seem to exist anymore) or do i have to go into download and flash through odin 3.09?
2) Installing a custom rom? I want to install Paranoid Android 4.6 beta 5 for D2lte but i'm not sure how to go about it. I have already downloaded the rom itself but not sure how to proceed from here. Also, how would i get the working and latest version of Gapps? (Also, can you tell me how to install Cyanogenmod 11 for d2lte as well?)
3) What are some cool apps to get?
4) Which root apps/roms/softwares will brick my phone? I'm never sure which thing will work and which won't.
5) how do i install xposed?
6) How do i remove all the bloatware? and how would i got about flashing through my phone without using the computer? is mobile odin compatible with my phone?
My phone is the SGH-T999L and i have no idea if i have a locked bootloader and how i would go about and bypass the limitations of this locked bootloader
rocket540 said:
Hey, I've been trying to root my S3 running the T999LUVUBNF4 firmware, but I'm having trouble. Towelroot doesn't support it, I haven't seen anything about a Root66, and I've heard mixed reports on CF-auto root. Does anyone know if there is a workable solution yet? How would I go about flashing SuperSU? Thanks.
Click to expand...
Click to collapse
Did you read my post above yours?
IceHism said:
Okay I've recently just flashed the root66 firmware that gave me supersu and all that.
My question is... Where do i go from here?
How would i proceed to
1) Install TWRP?, which version as well? Is 2.8 d2tmo fine? Can i have some instructions whether i use TWRP manager(goomanager doesn't seem to exist anymore) or do i have to go into download and flash through odin 3.09?
2) Installing a custom rom? I want to install Paranoid Android 4.6 beta 5 for D2lte but i'm not sure how to go about it. I have already downloaded the rom itself but not sure how to proceed from here. Also, how would i get the working and latest version of Gapps? (Also, can you tell me how to install Cyanogenmod 11 for d2lte as well?)
3) What are some cool apps to get?
4) Which root apps/roms/softwares will brick my phone? I'm never sure which thing will work and which won't.
5) how do i install xposed?
6) How do i remove all the bloatware? and how would i got about flashing through my phone without using the computer? is mobile odin compatible with my phone?
My phone is the SGH-T999L and i have no idea if i have a locked bootloader and how i would go about and bypass the limitations of this locked bootloader
Click to expand...
Click to collapse
Please don't post the same thing on multiple threads. Not being rude but it doesn't help at all
Rooting SGH-T99L with T999LUVUBNF4
I've read most of the more recent posts, and it is still unclear to me how to root my T999L which is already on the T999LUVUBNF4 baseband and build. I've seen references to cf-auto-root (like serio22 above), but the T999 (which I believe works for T999L) is based on T999UVALEM, which is 4.0.4 ICS. I certainly don't want to downgrade that far. The latest firmware on the first page of this Root66 thread is T999L_UVUBNC1, and there was a post indicating better reception with the newer modem, so I'd rather not downgrade that either. If I flash T999L_UVUBNC1 will my baseband remain intact (BNF4)? Or should I wait for a pre-rooted T999L_UVUBNF4? Or is there a better way altogether to root my T999L/BNF4?
Also, for other n00bs reading this, it's pretty clear that towelroot doesn't work on BNF4.
Thanks!!
I need some help repairing my imei
I'm on the t999
nc2 radio
on a t mobile based rom 4.3
Stock root image for Baseband ver
IM TRYING TO FIND OUT HOW TO ROOT MY s3, A baseband version of SGL99L t mobile samsung s3 T999LUVUBNF4, what file do i want?
Best root and 4.4 rom for NF4 t999L
Did you find one DKARMANN?
@DocHoliday77 is there any root66 for UVUBNF4? I tried searching everywhere in the forums and I can't seem to find anything.
android_noob12 said:
@DocHoliday77 is there any root66 for UVUBNF4? I tried searching everywhere in the forums and I can't seem to find anything.
Click to expand...
Click to collapse
not root66 , but did you read post #4?
mrrocketdog said:
not root66 , but did you read post #4?
Click to expand...
Click to collapse
See post #8, re cf-root and downgrading.
rooted Windmobile 4.4.4
anyone have 4.4.? for wind mobile what ever is the new one stock that is rooted ?
I tried flashing UVDLJC - UVDMD5 (latest OTA update) using Multiboot Recovery v2.2 - (twrp2.8.3.0)
When flashing directly onto blank partition, I got some error about missing build.prop, and so decided to try flashing on top of stock ROM.
Stock I have installed as Flash PureStock Rom + Secure UVAMB7 Kernel (from http://forum.xda-developers.com/showpost.php?p=43772060&postcount=3) -- again, in multiboot -- and tried installing OTA on top of that. Got "error executing updater binary in zip"
What am I doing wrong?
Thanks
slimkat v9 to stock tw
Please help me. I have a sgh-t999. I want to know is it safe to install stock tw t999_uvuenc2. I'm currently running slimkat v9. My baseband is t999uvuenc2 and my android version is 4.4.4 i really want my s3 to revert back to stock. Ive been asking to the roms posted in this unit if it safe to direct flash but i havent got a good advice. I really want the stock touchwiz. Pls help me.
Which firmware to use
After I un-bricked my SGH-T999 with the debrick image sdcard ( YAYYY), I was able to boot with the stock 4.3 rom again.
I reflash the root66 4.3 firmware hoping it could get the correct boot image back in place. However it got stuck at the Samsung logo.
So I went into stock recovery and did a wipe/factory reset. Now I can still boot with the debrick sdcard but I am back in JellyBean (4.1.2 T999UVDMD5).
Which firmware should I flash 4.3 or 4.1.2? And did I miraculously downgraded my firmware ( I thought it wasn't possible) ?
iam.alucard said:
Please help me. I have a sgh-t999. I want to know is it safe to install stock tw t999_uvuenc2. I'm currently running slimkat v9. My baseband is t999uvuenc2 and my android version is 4.4.4 i really want my s3 to revert back to stock. Ive been asking to the roms posted in this unit if it safe to direct flash but i havent got a good advice. I really want the stock touchwiz. Pls help me.
Click to expand...
Click to collapse
Late, but yes you can, you'll have to factory reset
pancakemiz said:
After I un-bricked my SGH-T999 with the debrick image sdcard ( YAYYY), I was able to boot with the stock 4.3 rom again.
I reflash the root66 4.3 firmware hoping it could get the correct boot image back in place. However it got stuck at the Samsung logo.
So I went into stock recovery and did a wipe/factory reset. Now I can still boot with the debrick sdcard but I am back in JellyBean (4.1.2 T999UVDMD5).
Which firmware should I flash 4.3 or 4.1.2? And did I miraculously downgraded my firmware ( I thought it wasn't possible) ?
Click to expand...
Click to collapse
What does download mode display?
Unsure which firmware to use
serio22 said:
What does download mode display?
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-T999
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Warranty Bit: 1
Bootloader AP SWAEV: 1
Am I correct that if the root66 firmware had installed correctly, it should read:
Custom Binary Download: Yes
Current Binary: Custom
Click to expand...
Click to collapse
.