When do you think it will come to our device?
These forums for the KF2 are dead, so chances are slim to never. Almost all the devs are gone, or just think its more worth it to upgrade to a better, newer tablet.
Sent from my Amazon Kindle Fire2 using XDA Premium 4 mobile app
iamterence said:
These forums for the KF2 are dead, so chances are slim to never. Almost all the devs are gone, or just think its more worth it to upgrade to a better, newer tablet.
Sent from my Amazon Kindle Fire2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The cyanogen team had kf2 listed on their 10.2 builds. Would they be included on 11?
punkcitykid said:
The cyanogen team had kf2 listed on their 10.2 builds. Would they be included on 11?
Click to expand...
Click to collapse
Our device maintainer is @Hashcode so ask him
[Post_Deleted]
I can get it to compile (CM11, AOKP4.4, and/or OmniROM 4.4) BUT TWRP needs to be upgraded...you will get a flash error. I tried to make an updated TWRP and was successful but still cannot get it to boot. Still looking into it when I get time.
But I only know so much about android systems, Hashcode is doing all of the hard work.
obsolete1 said:
I can get it to compile (CM11, AOKP4.4, and/or OmniROM 4.4) BUT TWRP needs to be upgraded...you will get a flash error. I tried to make an updated TWRP and was successful but still cannot get it to boot. Still looking into it when I get time.
But I only know so much about android systems, Hashcode is doing all of the hard work.
Click to expand...
Click to collapse
That's been an issue on almost all devices, so the solution has been to just switch to clockworkmod in the meantime. Not sure if there's an updated version of cwm for the kf2, though.
Sent from my Amazon Kindle Fire2 using XDA Premium HD app
agentfusion said:
That's been an issue on almost all devices, so the solution has been to just switch to clockworkmod in the meantime. Not sure if there's an updated version of cwm for the kf2, though.
Sent from my Amazon Kindle Fire2 using XDA Premium HD app
Click to expand...
Click to collapse
I dont think anyone on here has tried a CWM and made it public.
I did make a TWRP from CM10.2 and swaped in TeamWin recovery binaries (which should make TWRP 2.7) but when flashed to my KF2 it only reads 2.6.3 which is what it had before...but now can flash KitKat but not boot.
Good news: CM11 came to otter2!!!
Bad news: I can't flash it. It ends up with the error set_metadata_recursive: some changes failed.
Can someone make CWM for otter2 and upload it to their d-h.st account?
mr_verystock said:
Good news: CM11 came to otter2!!!
Bad news: I can't flash it. It ends up with the error set_metadata_recursive: some changes failed.
Can someone make CWM for otter2 and upload it to their d-h.st account?
Click to expand...
Click to collapse
I spoke with hashcode and he is providing an updated twrp soon. Very busy dude so it might take a bit.
--》Sent from my mind to your screen
Guys you don't need an updated version of twrp. Just simply replace the update binary with this one and you can flash it...
Sry for no credit but I can't find the thread of the author.
flopower1996 said:
Guys you don't need an updated version of twrp. Just simply replace the update binary with this one and you can flash it...
Sry for no credit but I can't find the thread of the author.
Click to expand...
Click to collapse
Hashcode took care of us per my request bro.
Love that guy.
--》Sent from my mind to your screen
Well, it works with his latest post as TWRP 2.6.3.1.
GREAT JOB HASHCODE!!!
---------- Post added at 07:54 AM ---------- Previous post was at 07:46 AM ----------
mindmajick said:
I spoke with hashcode and he is providing an updated twrp soon. Very busy dude so it might take a bit.
--》Sent from my mind to your screen (OR did you...)
Click to expand...
Click to collapse
Never mind bout that... He posted the upgrade already.
mr_verystock said:
Well, it works with his latest post as TWRP 2.6.3.1.
GREAT JOB HASHCODE!!!
---------- Post added at 07:54 AM ---------- Previous post was at 07:46 AM ----------
Never mind bout that... He posted the upgrade already.
Click to expand...
Click to collapse
Per my request
--》Sent from my mind to your screen
mindmajick said:
Per my request
--》Sent from my mind to your screen
Click to expand...
Click to collapse
TWRP 2.6.3.1
http://goo.im/devs/Hashcode/otter2/
nico_nuggets said:
TWRP 2.6.3.1
http://goo.im/devs/Hashcode/otter2/
Click to expand...
Click to collapse
Whats your point? We know it's up.
http://forum.xda-developers.com/showthread.php?t=2218868
--》Sent from my mind to your screen
nico_nuggets said:
TWRP 2.6.3.1
http://goo.im/devs/Hashcode/otter2/
Click to expand...
Click to collapse
good morning :silly:
Related
Hello Everybody
Looking for a simple step-by-step solution to install "2nd Bootloader + TWRP" on the "KINDLE FIRE 2" with OS 1.3.1.
It's been two days that I seek and I find nothing simple, that detail step by step.
If someone could help me I really need help.
Thank you and sorry for my English.
Install and run the apk from here:
http://forum.xda-developers.com/showthread.php?t=2106463
It doesn't get any easier.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
simple step by step process
grandmore said:
Hello Everybody
Looking for a simple step-by-step solution to install "2nd Bootloader + TWRP" on the "KINDLE FIRE 2" with OS 1.3.1.
It's been two days that I seek and I find nothing simple, that detail step by step.
If someone could help me I really need help.
Thank you and sorry for my English.
Click to expand...
Click to collapse
Use mindmajiks link this one only applies to hd version 10.3.1
ToCoolForSchool2013 said:
I came across this complete tutorial on my search for a more clear way of adding the 2nd boot loader. This actually makes it seem alot more simple. Im rooted and running the most recent Hashcode version of Cyanogenmod 10.1
http://forum.xda-developers.com/showthread.php?t=2271909
Credits: Hashcode, fattire, and verygreen for the work on the bootloader, stanga72 for the app FireFlash v1.1, sparkym3 and Bin4ry for their rooting methods, and seokhun for the creation of the guide reference above!
READ EVERYTHING CAREFULLY SO YOU DO NOT BRICK YOUR DEVICE! :good:
Click to expand...
Click to collapse
HELP ME !!! i have a message in TWRP no os installed. are you sure you wish to reboot? and i habe reboot !!! and now my kindle stay in twrp !! Help me
ToCoolForSchool2013 said:
I came across this complete tutorial on my search for a more clear way of adding the 2nd boot loader. This actually makes it seem alot more simple. Im rooted and running the most recent Hashcode version of Cyanogenmod 10.1
http://forum.xda-developers.com/showthread.php?t=2271909
Credits: Hashcode, fattire, and verygreen for the work on the bootloader, stanga72 for the app FireFlash v1.1, sparkym3 and Bin4ry for their rooting methods, and seokhun for the creation of the guide reference above!
READ EVERYTHING CAREFULLY SO YOU DO NOT BRICK YOUR DEVICE! :good:
Click to expand...
Click to collapse
Isn't that for the HD?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mindmajick said:
Isn't that for the HD?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yes it is the firmware he stated was that of a Kindle Fire HD 7 the 10.3.1 and that is the guide that I pointed him to.
ToCoolForSchool2013 said:
Yes it is the firmware he stated was that of a Kindle Fire HD 7 the 10.3.1 and that is the guide that I pointed him to.
Click to expand...
Click to collapse
No. No. No.
10.3.1 is the kindle fire 2.
NOT THE HD. NOT.
I really wish people would stop doing this. Gee- Wonder why there are so many bricks around (sarcasm intended)
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mindmajick said:
No. No. No.
10.3.1 is the kindle fire 2.
NOT THE HD. NOT.
I really wish people would stop doing this. Gee- Wonder why there are so many bricks around (sarcasm intended)
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I must have gotten lucky with my HD then because but I will delete this post since the info is incorrect my opologies.
ToCoolForSchool2013 said:
Use mindmajiks link this one only applies to hd version 10.3.1
Click to expand...
Click to collapse
There is no HD version 10.3.1
You must have a kindle fire 2. If you look in the HD section you will see a COMPLETELY different version number.
The versions for the 7" HD model are 7.3.x
Sounds like you got REAL lucky since I don't think you know what device you have!
--
Sent from my mind to your screen.
---------- Post added at 06:36 PM ---------- Previous post was at 06:29 PM ----------
grandmore said:
HELP ME !!! i have a message in TWRP no os installed. are you sure you wish to reboot? and i habe reboot !!! and now my kindle stay in twrp !! Help me
Click to expand...
Click to collapse
Where are you with things now? Still in twrp?
--
Sent from my mind to your screen.
mindmajick said:
There is no HD version 10.3.1
You must have a kindle fire 2. If you look in the HD section you will see a COMPLETELY different version number.
The versions for the 7" HD model are 7.3.x
Sounds like you got REAL lucky since I don't think you know what device you have!
--
Sent from my mind to your screen.
---------- Post added at 06:36 PM ---------- Previous post was at 06:29 PM ----------
Where are you with things now? Still in twrp?
--
Sent from my mind to your screen.
Click to expand...
Click to collapse
You may be right I may have thought mine was 10.3.1 when really it was 7.3.1 with the thousands of posts just about the kindle fire its is easy to get confused and lost just like I somehow ended up posting incorrect info in the kindle fire 2 section when I typed in Amazon 7 Kindle Fire HD in the search bar at the top. I was a man and admitted I was wrong and withdrew my comment now will you drop it. Thanks
Dropped. Nothing personal. Just want to keep things accurate to protect others.
Takes a big man to admit his mistake. I've made my share.. That's for sure!
We're all here to help each other (well, most of us lol)
--
Sent from my mind to your screen.
NOT WORKING. COMPILING RESOURCES ON BUILDING FROM SOURCE. DON'T DOWNLOAD UNTIL X IS DELETED FROM TITLE. SORRY!!!!
OMG 4.3 CUSTOM ROM! TYBG!
Custom 4.3 Rom I tried to put together. If there are any kinks and what not, please tell me. It's my first rom so don't go too harsh on me. I used XenonHD as a base and changed a few things, . Special thanks to the XenonHD crew (Team Horizon) for the rom to build on and kevdliu for the initial 4.3 rom!
Also, make sure to do a nandroid back up.
Download
http://d-h.st/E2T
Download Gapps:
Dev-Host: http://d-h.st/UDe
Source: http://forum.xda-developers.com/show...38&postcount=1
*** Goo.im Gapps for 4.2.2 did not work. Use other Gapps at your own risk! ***
) Download SuperSU:
Dev-Host: http://d-h.st/7KB
Source: http://download.chainfire.eu/340/Sup...30625-1.41.zip
Instructions
clear cache, dalvik, and data
flash rom
flash gapps
flash SuperSU
when it says disable recovery flash select no
???
profit!
"We are not responsible for your device! We do not guarantee that everything will work the way it's supposed to. Not every device is created equal, what might work on our devices may not work on yours or vice versa. Please be a responsible person when it comes to flashing. This is a mature site, don't act immaturely when your device becomes problematic. If you cry and blame us for "destroying" your device, we will laugh at you. Your device is your responsibility, act like it.
Thanks for choosing Team Horizon, we hope you enjoy our works as much as we enjoy working with them." - Team Horizon
Downloading now! Any screenshots?
Sent from my AOSP on Toro using Tapatalk 4 Beta
Terrell1433 said:
Downloading now! Any screenshots?
Sent from my AOSP on Toro using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hold up, I'll get some up right now...
Enter The Nexus said:
Hold up, I'll get some up right now...
Click to expand...
Click to collapse
Sweet! Did you get exchange services working or are they not included? I know on stock ROM they force close.
Sent from my AOSP on Toro using Tapatalk 4 Beta
Downloading~
Flashing ASAP :fingers-crossed:
Installation aborted?
For some reason, I'm getting an installation aborted. Don't flash until further notice, as I'll try to be fixing this.
Enter The Nexus said:
For some reason, I'm getting an installation aborted. Don't flash until further notice, as I'll try to be fixing this.
Click to expand...
Click to collapse
Got the same error.
Sent from my AOSP on Toro using Tapatalk 4 Beta
Terrell1433 said:
Got the same error.
Sent from my AOSP on Toro using Tapatalk 4 Beta
Click to expand...
Click to collapse
yeah me too
Just redo the zip, it went into a folder in / of the zip. I am moving files quick to see if that works
Sent from my Galaxy Nexus using Tapatalk 4 Beta
ironfisted said:
Just redo the zip, it went into a folder in / of the zip. I am moving files quick to see if that works
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks man, it would be nice to find my error.
Sent from my AOSP on Toro using xda app-developers app
Enter The Nexus said:
Thanks man, it would be nice to find my error.
Sent from my AOSP on Toro using xda app-developers app
Click to expand...
Click to collapse
well i did that and it flashed but its a non booter
ironfisted said:
well i did that and it flashed but its a non booter
Click to expand...
Click to collapse
I left my computer so I can't see what the problem is. Did the "installation failed" error come up?
Sent from my AOSP on Toro using xda app-developers app
Enter The Nexus said:
I left my computer so I can't see what the problem is. Did the "installation failed" error come up?
Sent from my AOSP on Toro using xda app-developers app
Click to expand...
Click to collapse
nope it finished flashing, then rebooted and just at google screen when you first boot it up
---------- Post added at 12:31 PM ---------- Previous post was at 12:28 PM ----------
then i cheated and created a whole new zip and tried booting, i got to boot animation and thats where it stayed
ironfisted said:
nope it finished flashing, then rebooted and just at google screen when you first boot it up
---------- Post added at 12:31 PM ---------- Previous post was at 12:28 PM ----------
then i cheated and created a whole new zip and tried booting, i got to boot animation and thats where it stayed
Click to expand...
Click to collapse
FUUUUUU- I want to do a Hangouts Session with people to figure out a problem and make a custom rom for VZW GNex.
https://plus.google.com/113815011188600151667 There's my G+
Flashing Now
adam80460 said:
Flashing Now
Click to expand...
Click to collapse
Any issues, I'm having issues even trying to install my ROM :/ Can you sprinkle some of your developer magic?
Enter The Nexus said:
Any issues, I'm having issues even trying to install my ROM :/ Can you sprinkle some of your developer magic?
Click to expand...
Click to collapse
I actually haven't had a chance to install it yet unfortunately.. What issues were you having?
Sent from my SCH-I535
Says "installation aborted". I'm a noob at development, so I don't know what happened. I added all of >system from XenonHD to Stock 4.3 rom along with a few build.prop changes but it's still screwing me over.
Yeah I never file swapped before .. Not sure how to fix that..
Enter The Nexus said:
Says "installation aborted". I'm a noob at development, so I don't know what happened. I added all of >system from XenonHD to Stock 4.3 rom along with a few build.prop changes but it's still screwing me over.
Click to expand...
Click to collapse
What do you mean you added all of >system to stock 4.3? Everything in /system makes up a custom ROM. If you replaced/overwrote everything in the 4.3 /system with the /system in XenonHD, you would basically just have XenonHD and it would not be 4.3 (unless it was to begin with). Maybe post what your goal is and we can help you get there . It'll be hard if you're trying to do it without compiling from source. It's not as easy as copying apk's from one rom to another.
[ROM] Unofficial CyanogenMod 10.2
http://db.tt/7pLKEySr
Latest gapps package for Android 4.3 http://forum.xda-developers.com/showthread.php?t=2387878
Note: I have not been able to test this rom yet so I'm not sure what works of does not work
I will write a much better post after work or on lunch
FIRST
SECOND!
Anyone test this yet?
frankx85 said:
Anyone test this yet?
Click to expand...
Click to collapse
Downloading now
I downloaded it and tested it. Now my sdcard won't mount and the phone won't boot, only into recovery :crying:
susy1990 said:
I downloaded it and tested it. Now my sdcard won't mount and the phone won't boot, only into recovery :crying:
Click to expand...
Click to collapse
Really that's odd like I said I have not tested this rom yet because I'm at work so I have not been able to check out issues
ROM doesn't boot.
I'd get a logcat but I'm out of town.
Sent from my SPH-D710 using Tapatalk 4
Dypraxxx said:
ROM doesn't boot.
I'd get a logcat but I'm out of town.
Sent from my SPH-D710 using Tapatalk 4
Click to expand...
Click to collapse
Can you please post the logcat when you a chance, also try this kernel it may work
http://forum.xda-developers.com/showthread.php?t=2270358
Same issue here, ROM wont boot
I'm sorry the rom doesn't boot rebuilding it now hopefully this one will boot again my apologizes
mtb3000gt said:
I'm sorry the rom doesn't boot rebuilding it now hopefully this one will boot again my apologizes
Click to expand...
Click to collapse
All is well I'm very interested in progress here also
Sent from my SCH-R760 using xda app-developers app
ps3hacker3 said:
All is well I'm very interested in progress here also
Sent from my SCH-R760 using xda app-developers app
Click to expand...
Click to collapse
Im working hard on it i really want to get a bootable build going but im having some trouble
mtb3000gt said:
Im working hard on it i really want to get a bootable build going but im having some trouble
Click to expand...
Click to collapse
Take your time my friend! We all appreciate the work your putting in to get us the 4.3 Release so you gotta do what ya gotta do. I'll be waiting for the release
l3gacy28 said:
Take your time my friend! We all appreciate the work your putting in to get us the 4.3 Release so you gotta do what ya gotta do. I'll be waiting for the release
Click to expand...
Click to collapse
trying another build now i think the last build was missing some proprietary files so keep your fingers crossed this one builds
mtb3000gt said:
trying another build now i think the last build was missing some proprietary files so keep your fingers crossed this one builds
Click to expand...
Click to collapse
*crosses fingers and prays* "Please boot.Please boot.Please boot.Please boot."
did any one try flashing a different kernel with the last build to see if that made any difference
Getting ready to flash the newest build,,,i hope it boots
No boot just a black screen ?????
mtb3000gt said:
Getting ready to flash the newest build,,,i hope it boots
No boot just a black screen ?????
Click to expand...
Click to collapse
DARN! do you know what it's missing? I wish I could contribute in any way but I don't know ANY programming or coding
Sent from my SPH-D710 using Tapatalk 4 Beta
l3gacy28 said:
DARN! do you know what it's missing? I wish I could contribute in any way but I don't know ANY programming or coding
Sent from my SPH-D710 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I'm not sure I thought I had everything this time but same thing it tries to boot but just a black screen
EDIT: Sorry guys, I won't be maintaining this anymore. I really apologize, but there's just too much to do nowadays. I will still maintain my carbon builds. (These boot and work without modification right now, for some reason my slim build won't boot, and I don't really have time to figure out why, because it could be an issue on my side or their side)
The moderators can end this thread if they wish to.
Carbon: http://forum.xda-developers.com/showthread.php?p=46548342
I shall still leave my jellybean build here though.
Downloads:
http://d-h.st/Kkh (November 8, 2013)
http://d-h.st/SMD (November 15, 2013)
GAPPS: slimroms.net --> Downloads --> addons
Are you really the dev of these ROMs? They seem a bit untrustworthy, since you or anyone else hasn't tested them.
Sent from my Amazon Kindle Fire using xda app-developers app
404-Not Found said:
Are you really the dev of these ROMs? They seem a bit untrustworthy, since you or anyone else hasn't tested them.
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
He is compiling them. The Kindle fire base and the kernel is developed by Hashcode. Slim, AOKP, and Carbon implementations are all created by their perspective developers. Does that answer your question? Compiling a Rom is just a matter of setting up the proper environment and repositories then letting it rip. Well there`s a bit more to it than that but you get the jist.
Yeah he's exactly right. ^ also, I test the first build to make sure it does work and then I put it out if anyone wants to use it. I am building these myself. I can take screenshots of the builds straight from my computer if you'd like.
I may not be able to maintain all these ROMs, but I'd like to put the options out there. I might have to request for other people to maintain the aokp and slimbean thread if life gets too busy. I was originally only planning on maintaining carbon.. So I will keep going with that.
Thanks for the ports. Slimbean runs well, no real problems or quibbles I've found so far.
36 hours and one full cycle into this one and all is good. Seems SlimBean has settled in nicely on my KF. Thanks androidsftw! Your efforts to bring this variety of ROMs for us is greatly appreciated here!
Thepooch said:
He is compiling them. The Kindle fire base and the kernel is developed by Hashcode. Slim, AOKP, and Carbon implementations are all created by their perspective developers. Does that answer your question? Compiling a Rom is just a matter of setting up the proper environment and repositories then letting it rip. Well there`s a bit more to it than that but you get the jist.
Click to expand...
Click to collapse
I guess that does answer my question, but I find it a rare event like this to happen.
404-Not Found said:
I guess that does answer my question, but I find it a rare event like this to happen.
Click to expand...
Click to collapse
Actually, it's not rare at all.
Not sure why people are being skittish about using the ROM, I've run it for about a week now and it's rock solid stable! Fast and smooth...definitely one of the best 4.3.1 ROMs out.
Edit; Ive been using a few of the KitKat 4.4 system apks ( Play services, email, GEL Launcher, keyboard...) from here without any issues, making this Rom just that much more awesome. Can't wait for SlimRom to get updated to the new base!
Sent from my Amazon Kindle Fire using xda app-developers app
erad1 said:
Not sure why people are being skittish about using the ROM, I've run it for about a week now and it's rock solid stable! Fast and smooth...definitely one of the best 4.3.1 ROMs out.
Edit; Ive been using a few of the KitKat 4.4 system apks ( Play services, email, GEL Launcher, keyboard...) from here without any issues, making this Rom just that much more awesome. Can't wait for SlimRom to get updated to the new base!
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
To be honest with you I already have cm 11 and aosp built for the kindle fire. Unfortunately I can't test either until twrp releases a new build with kitkat support. I attempted to build twrp from source.. And it did build.. But let's just say the recovery doesn't work well xD.
androidsftw said:
To be honest with you I already have cm 11 and aosp built for the kindle fire. Unfortunately I can't test either until twrp releases a new build with kitkat support. I attempted to build twrp from source.. And it did build.. But let's just say the recovery doesn't work well xD.
Click to expand...
Click to collapse
That sounds great! Would this be of any help with the recovery issue?: http://forum.xda-developers.com/showpost.php?p=47024590&postcount=13
http://goo.im/devs/Hashcode/otter/recovery/flash-zip/
I think this one will help you.
themoto said:
http://goo.im/devs/Hashcode/otter/recovery/flash-zip/
I think this one will help you.
Click to expand...
Click to collapse
Thanks but I don't need it I've had recovery working for the past two weeks since TWRP has already released a build that works with kitkat.
TWRP 2.6.3.1
themoto said:
http://goo.im/devs/Hashcode/otter/recovery/flash-zip/
I think this one will help you.
Click to expand...
Click to collapse
Is there a flashable zip of 2.6.3.1 out there?
androidsftw said:
Thanks but I don't need it I've had recovery working for the past two weeks since TWRP has already released a build that works with kitkat.
TWRP 2.6.3.1
Click to expand...
Click to collapse
Sent from inside the time vortex
johnadelic said:
Is there a flashable zip of 2.6.3.1 out there?
Sent from inside the time vortex
Click to expand...
Click to collapse
I'm not sure, I just do it the manual way with fastboot.
androidsftw said:
I'm not sure, I just do it the manual way with fastboot.
Click to expand...
Click to collapse
The better way...
Download flashify from play store.
Download twrp 2.6.3.1 IMG
Open flashify n flash
------------------------------------------------------
If I was Helpful, click thanks
Sent from my air powered ceiling fan
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Now: one common recovery for all: d2lte
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
The below specific variants are no more updated, use d2lte common variant
- d2att
Click to expand...
Click to collapse
Thank you! This latest update is compatible with KitKat 4.4.
Thanks sir..
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thank you
Sent from my SAMSUNG-SGH-I747 using Tapatalk
thank you for the support!
thanks.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
(^o^) thanks
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thanks @Phil3759 for building recovery for d2att.
Eagerly waiting for the next version based on the latest CWM Recovery
---------- Post added at 06:31 AM ---------- Previous post was at 06:26 AM ----------
Bit of search and found the latest version of the Recovery.
FYI the link for v6.07.9
http://www.mediafire.com/download/bhbbqdx16chbl6y/philz_touch_6.07.9-d2att.zip
matrixzone said:
Thanks @Phil3759 for building recovery for d2att.
Eagerly waiting for the next version based on the latest CWM Recovery
---------- Post added at 06:31 AM ---------- Previous post was at 06:26 AM ----------
Bit of search and found the latest version of the Recovery.
FYI the link for v6.07.9
http://www.mediafire.com/download/bhbbqdx16chbl6y/philz_touch_6.07.9-d2att.zip
Click to expand...
Click to collapse
Did it work for you? It didn't for me. Soft bricked my phone. Luckily I could Odin out of it.
Crack-Flasher
SlothlyDX said:
Did it work for you? It didn't for me. Soft bricked my phone. Luckily I could Odin out of it.
Crack-Flasher
Click to expand...
Click to collapse
I was about to flash the recovery, was taking backup and got call. Thanks will hold on flashing this until fixed by @Phil3759
matrixzone said:
I was about to flash the recovery, was taking backup and got call. Thanks will hold on flashing this until fixed by @Phil3759
Click to expand...
Click to collapse
SlothlyDX said:
Did it work for you? It didn't for me. Soft bricked my phone. Luckily I could Odin out of it.
Crack-Flasher
Click to expand...
Click to collapse
It works totally fine for me not sure why you had a soft brick issue. Its a lot nicer than having to use the volume buttons to toggle around.
Phil3759 said:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
...
Click to expand...
Click to collapse
hey phil, first of all, thank your for your hard work, it really is something great.
this being such a popular device, can you update to latest version?
New philz came out yesterday. Loving it.
Crack-Flasher
Thanks for update..
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Now: one common recovery for all: d2lte
The d2att specific variants are no more updated, use d2lte common variant
So all d2att will now be d2lte?
neojim913 said:
So all d2att will now be d2lte?
Click to expand...
Click to collapse
yes not even this recovery, some.roms like cm, aokp and omirom will be unified as d2lte
Sent from my SAMSUNG-SGH-I747 using Tapatalk
blackwing182 said:
yes not even this recovery, some.roms like cm, aokp and omirom will be unified as d2lte
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Do you know where the 6.19.2 update can be found? I dont know how to build my own
daha2002 said:
Do you know where the 6.19.2 update can be found? I dont know how to build my own
Click to expand...
Click to collapse
In op u find link ur looking for.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
No latest build yet (6.22) :crying:
On 6.19, everytime i boot recovery, the recovery settings are reset to defaults, i have to load the config from a save file every time. Any idea why this is?