Related
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
I think you can use the appropriate nandroid backup from here http://forum.xda-developers.com/showthread.php?t=1975140 if an ruu is not available.
willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine
willmott1992 said:
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine
Click to expand...
Click to collapse
I hope you are lucky too. The relocked state could be a reason not to repair under warranty
Help
Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help
ryanrazer said:
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help
Click to expand...
Click to collapse
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version
Thant said:
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version
Click to expand...
Click to collapse
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it
ryanrazer said:
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it
Click to expand...
Click to collapse
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.
Thant said:
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.
Click to expand...
Click to collapse
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?
ryanrazer said:
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?
Click to expand...
Click to collapse
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.
Thank you
Thant said:
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.
Click to expand...
Click to collapse
Thank you for all your help! My phone is back on stock! Thank you!
ryanrazer said:
Thank you for all your help! My phone is back on stock! Thank you!
Click to expand...
Click to collapse
No problem You go to stock only with RUU 3.14.401.31 right?
No warranty
Thant said:
No problem You go to stock only with RUU 3.14.401.31 right?
Click to expand...
Click to collapse
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/
ryanrazer said:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/
Click to expand...
Click to collapse
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me
Thant said:
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me
Click to expand...
Click to collapse
Aha ok... i will try my luck! Thanks mate, i will report back their decision!
ryanrazer said:
Aha ok... i will try my luck! Thanks mate, i will report back their decision!
Click to expand...
Click to collapse
Good luck from me I hope they will repair:good:
Thant said:
Good luck from me I hope they will repair:good:
Click to expand...
Click to collapse
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
prafulk1987 said:
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
Click to expand...
Click to collapse
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28
Thant said:
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28
Click to expand...
Click to collapse
The utility reaches the screen where it starts copying stuff. .then gives an error 158 and tells me to find the correct update update utility. .
What am i doing wrong
I think the utility will not downgrade me from 4.19.708.1 to a 3.xx.708.xx ?? For that do we need to do a nandroid restore ? In that case can anyone point me to th one that will be applicable for me ? Since i have no clue on that. .
I just want to go back to 4.1.1 or 4.1.2 as the 4.2.2 update broke my camera focussing funtionality.
Hey guys
Not sure what happened but suddenly I don't have a baseband id any more... Doesn't show up on getvar all or in the bootloader...
All I did was install viper rom 1.7.1 and try to s-off with firewater... Although I keep getting the whelp message..
Is there anything I can do?
Everything works fine though
Do you have a backup?
Should just be a case of installing a firmware.zip. You can get this from an ota.
ashyx said:
Do you have a backup?
Should just be a case of installing a firmware.zip. You can get this from an ota.
Click to expand...
Click to collapse
I don't have a backup! Maybe I should have backed it up before I started flashing... this has never happened to me before though..
Can i install firmware without s-off though? Would i have to relock my bootloader?
oonline said:
I don't have a backup! Maybe I should have backed it up before I started flashing... this has never happened to me before though..
Can i install firmware without s-off though? Would i have to relock my bootloader?
Click to expand...
Click to collapse
Only the firmware for your carrier and model
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Android The Greek said:
Only the firmware for your carrier and model
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
unfortunately i don't have that... my cid is 044... can't find it on XDA...
You will have to relock boot loader. As long as you flash the latest firmware for your device and it matches your MID and CID it should flash using stock recovery.
Make a nandroid back up first of your boot.img as this will get overwritten then flash it back. Obviously you will have to reinstall your custom recovery again.
ashyx said:
You will have to relock boot loader. As long as you flash the latest firmware for your device and it matches your MID and CID it should flash using stock recovery.
Make a nandroid back up first of your boot.img as this will get overwritten then flash it back. Obviously you will have to reinstall your custom recovery again.
Click to expand...
Click to collapse
will give it a go! thanks!
oonline said:
unfortunately i don't have that... my cid is 044... can't find it on XDA...
Click to expand...
Click to collapse
Have a look here:
http://forum.xda-developers.com/showthread.php?t=2696282
Post an output of fastboot getvar all
SaHiLzZ said:
Post an output of fastboot getvar all
Click to expand...
Click to collapse
hey guys... i've managed to update my firmware but now it says in the bootloader...
RADIO-INVALID_VER_INFO
OpenDSP-INVALID_VER_INFO
getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.707.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH447WM05857
(bootloader) imei: 358716055168669
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Hi, can someone help me on how to unroot/restore my htc one x back to stock?
im currently using a custom rom which is ViperX 4.0.3
plus i dont have my backup stock rom file.
please help
thanks in advance!
thirdempire said:
Hi, can someone help me on how to unroot/restore my htc one x back to stock?
im currently using a custom rom which is ViperX 4.0.3
plus i dont have my backup stock rom file.
please help
thanks in advance!
Click to expand...
Click to collapse
post the result from command fastboot getvar version-main
Thant said:
post the result from command fastboot getvar version-main
Click to expand...
Click to collapse
how to do that? sorry this phone was given to me by my cousin and i dont know how to start.
thirdempire said:
how to do that? sorry this phone was given to me by my cousin and i dont know how to start.
Click to expand...
Click to collapse
then better read in general section some guide, you need fastboot and adb on your computer. You don't know how to go in bootloader and you want to flash rom. Please be more specific. Not like I am using ViperX say I take phone with installed ViperX. It is not so ease to restore phone and in case you don't know how to use fastboot!
And now my answare download fastboot and adb go in bootloader and run the command. To go in bootloader tutn off your phone then press volume down + power button until you are in bootloader.
i got it now sir
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
thirdempire said:
i got it now sir
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Now first download this RUU , charge the phone to full relock your bootloader and run the RUU as administrator.
to relock bootloader use the command fastboot oem lock if your bootloader say Unlocked you must run the command if say RELOCK then you are ready to run the RUU
And if you think I didn't see you post me the result from other command you are wrong
thank you sir, ill try it now.
Thant said:
Now first download this RUU , charge the phone to full relock your bootloader and run the RUU as administrator.
to relock bootloader use the command fastboot oem lock if your bootloader say Unlocked you must run the command if say RELOCK then you are ready to run the RUU
And if you think I didn't see you post me the result from other command you are wrong
Click to expand...
Click to collapse
Do you have a O2__001 RUU ?
GlennBrownie said:
Do you have a O2__001 RUU ?
Click to expand...
Click to collapse
NO I think read some your post you are with 1.72 hboot and there no RUU for this hboot you must found newr nandroid backup and rrestore it or install custom rom
Thant said:
NO I think read some your post you are with 1.72 hboot and there no RUU for this hboot you must found newr nandroid backup and rrestore it or install custom rom
Click to expand...
Click to collapse
I found one, does anyone need a copy?
GlennBrownie said:
I found one, does anyone need a copy?
Click to expand...
Click to collapse
Found RUU or backup for backup I dont need for RUU will be intersting to see this one
Hello,
Two months ago I upgraded my android version to 5.0.1, since then wifi problems start to appear.
There are two problems:
1) When the phone is sleeping, the wifi disconnect. once I wake the phone, even if it still locked, the wifi turns on again after 1 second. (I checked the advanced settings and "keep wifi on during sleep" is on "always").
2) Once I go from the wifi zone and come back after a while, I can't connect to the wifi. it just keep scanning, and when I tap on it to see available networks it just shows white page (switching wifi on and off doing nothing).
This problem can be solve by turning airplane mode on and off, but it only helps for one time - once I go away and come back to the same wifi zone I need to do it again.
*I tried factory reset, doesn't help.
*I flashed another rom, from HD revolution to ViperOne, and now my android version is 5.0.2, doesn't help.
*This problem happens in every router, not only in a specific one.
Maybe going back to the stock recovery will solve the problem, but I don't think so.
Thanks in advance
Avishay28 said:
Two months ago I upgraded my android version to 5.0.1, since then wifi problems start to appear.
*I flashed another rom, from HD revolution to ViperOne, and now my android version is 5.0.2, doesn't help.
Click to expand...
Click to collapse
Your android version is software version but not firmware version. You can't update your firmware by flashing ROMs.
Post your fastboot getvar all (delete serial & imei no.) then maybe that getvar info will point to your actual problem.
ckpv5 said:
Your android version is software version but not firmware version. You can't update your firmware by flashing ROMs.
Post your fastboot getvar all (delete serial & imei no.) then maybe that getvar info will point to your actual problem.
Click to expand...
Click to collapse
hi,
this is my info
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.21.21331147A1.19_2G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: BS_US001
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: df77f8b7
hbootpreupdate: 11
gencheckpt: 0
Is it help?
Your radio low version suggest that you have a 3.x firmware installed, not 4.x which is required for 5.0.x android version.
Here is the latest RUU for your device version : http://dl3.htc.com.s3.amazonaws.com...G_20.68.4196.01_F_release_446501_signed_2.exe
Relock bootloader & run RUU.
Later you can re-unlock bootloader and install any custom ROM that you like
ckpv5 said:
Your radio low version suggest that you have a 3.x firmware installed, not 4.x which is required for 5.0.x android version.
Here is the latest RUU for your device version : http://dl3.htc.com.s3.amazonaws.com...G_20.68.4196.01_F_release_446501_signed_2.exe
Relock bootloader & run RUU.
Later you can re-unlock bootloader and install any custom ROM that you like
Click to expand...
Click to collapse
I'm pretty new to all this, so I'll be glad to have some explanation.
What's "ruu"? And how do I relock the bootloader?
What's the difference between Android version and firmware version?
I need to wipe something before I run ruu?
You think this is what cause the Wi-Fi problems?
Thank you!
Here is a good read for you : http://forum.xda-developers.com/showthread.php?p=52484527
relock bootloader - run command fastboot oem lock (after you put your device in bootloader/fastboot mode and connect to PC)
No need to wipe anything - the RUU will remove all and replace everything with the latest images - data, system, firmware and ROM
Your wifi problem as mentioned earlier because your firmware is old and has old radio baseband and not meet the minimum requirement for Android 5.0..x
An important note : after you done the RUU thing, to install custom ROM or to root, you need to install latest TWRP 2.8.7.0
Don't use the old TWRP recovery that you have .. as seen in your getvar all, there are a few missing info because of outdated TWRP
ckpv5 said:
Here is a good read for you : http://forum.xda-developers.com/showthread.php?p=52484527
relock bootloader - run command fastboot oem lock (after you put your device in bootloader/fastboot mode and connect to PC)
No need to wipe anything - the RUU will remove all and replace everything with the latest images - data, system, firmware and ROM
Your wifi problem as mentioned earlier because your firmware is old and has old radio baseband and not meet the minimum requirement for Android 5.0..x
An important note : after you done the RUU thing, to install custom ROM or to root, you need to install latest TWRP 2.8.7.0
Don't use the old TWRP recovery that you have .. as seen in your getvar all, there are a few missing info because of outdated TWRP
Click to expand...
Click to collapse
Ok the status changed to "relocked" instead of "unlocked", now just run the ruu? is there any command or something?
edit: I need to gain s-off first?
sorry for all the questions, I don't want to damage the device
Avishay28 said:
Ok the status changed to "relocked" instead of "unlocked", now just run the ruu? is there any command or something?
edit: I need to gain s-off first?
sorry for all the questions, I don't want to damage the device
Click to expand...
Click to collapse
It's harder to help when you ask all non-related stuff. I don't mention anything about S-Off because it is not necessary.
I know your device is S-on, that's why I said relock bootloader
Only two steps :
relock bootloader - run comman fastboot oem lock
run RUU - right click the RUU and select run as administrator on windows context menu
What you need :
USB2.0 on PC
Latest HTC USB driver installed - if not sure, download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install it as it will install the latest driver then uninstall the HTC Sync Manager but leave the drivers.
Avishay28 said:
Ok the status changed to "relocked" instead of "unlocked", now just run the ruu? is there any command or something?
edit: I need to gain s-off first?
Click to expand...
Click to collapse
RELOCKED is fine to run the RUU (as is LOCKED). UNLOCKED is the only status for that particular flag that prevents RUU.
You don't need s-off to RUU.
I relock the bootloader and run the ruu and now the wifi is working fine!
Thank you very much for your help!
same wifi issue
Hi
I got the same wifi issue and I try exactly the same fix as #Avishay28 but they didn't work.
And now I know why thanks to you #redpoint73.
Would you please suggest what kind of RUU should i install to have my phone back fully working?
Those are my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Read post #8 for steps & what you need then install
4.16.401.10 RUU then do OTA to 4.16.401.13
http://androidruu.com/?developer=M8
I seem to have issues still even though I'm past version 4:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.12.20.1211
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.605.9
(bootloader) version-misc: PVT SHIP S-ON
anyone else have issues on this version?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU (Hboot PreUpdate)
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
im having same issue with the wifi
eternity4ever said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: 11111111
(bootloader) security: off
im having same issue with the wifi
Click to expand...
Click to collapse
First - edit your post to remove serial & imei no.
Your baseband version suggest that you have a 3.xx.xxxx.x firmware installed.
You need a 4.xx.xxx.x firmware to have a working wifi when install a lollipop ROM.
What device that you have ? 0P6B16000 can be a Canadian device and some South American device. Update your firmware to the one meant for your device version.
My is Canadian device. I couldn't find a ruu version of device
eternity4ever said:
My is Canadian device. I couldn't find a ruu version of device
Click to expand...
Click to collapse
There is no RUU available for Canadian device. At least tell what it is .. Rogers, Bell, Telus or ??? You can try to find a nandroid backup and stock recovery, restore then do OTA to update to the latest.
Or .. as your device is S-Off, you can change it WWE device i.e change MID to EU MID then install EU RUU.
ckpv5 said:
There is no RUU available for Canadian device. At least tell what it is .. Rogers, Bell, Telus or ??? You can try to find a nandroid backup and stock recovery, restore then do OTA to update to the latest.
Or .. as your device is S-Off, you can change it WWE device i.e change MID to EU MID then install EU RUU.
Click to expand...
Click to collapse
Rogers
As I mentioned above try find a backup for device.
You need 3.34.631.4 and its stock recovery.
I already switch off my PC and in bed. Not sure whether I have those files in my collection.
I'll check tomorrow when I have time but try to find it first. Should be available.
ckpv5 said:
As I mentioned above try find a backup for device.
You need 3.34.631.4 and its stock recovery.
I already switch off my PC and in bed. Not sure whether I have those files in my collection.
I'll check tomorrow when I have time but try to find it first. Should be available.
Click to expand...
Click to collapse
can you post the files please ?thank you
Hi guys,
Hoping someone can help me.
I've got a HTC One X that is currently stuck on the HTC splash screen. looks like previous owner unlocked it, as it had a version of CWM as Recovery.
I'm wanting to Restore the phone back to Original Stock Firmware/ROM (JB or Higher if available), but so far, with all the Tutorials and such I've read through, the links in a lot of them seem to be no more.
Phone details;
C:\Android\HTC One X>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.980.27
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3669mV
(bootloader) devpower: 47
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Bootloader Details
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 1. 36. 0000
CPLD - None
MICROP - None
RADIO - 5. 1204. 162. 29
eMMC - bootmode: Disabled
CPU-bootmode: Disabled
HW Secure Boot: Enabled
Modem Path: OFF
-----------------------------------------------
So far, I've only come across an RUU file named;
RUU_ENDEAVOR_U_ICS_40_Optus_AU_1.28.980.10_Radio_1.1204.103.14_release_258004_signed.exe
But it appears to be ICS, a lower version and different Radio...
Is there an 'RUU' that's more Stock, maybe a ROM directly from HTC?
If I get an Optus RUU... does that mean it'll have all that Optus bloatware in it ?
From reading around, I believe I'll need 3x files?
- Stock Recovery Image
- Firmware Image
- Boot Image (not sure what this is for, last custom rom I tried didn't mention flashing this file.. what's it for?)
Any help would be awesome! if you need any additional info, please let me know.
Thanks
There's a nandroid backup in the nandroid collection thread in the general forum that's 2.17.xxx which is still ICS but you might be able to restore it using cwm and flashing the boot.IMG in the backup. It might not work though.
mrbtree98 said:
There's a nandroid backup in the nandroid collection thread in the general forum that's 2.17.xxx which is still ICS but you might be able to restore it using cwm and flashing the boot.IMG in the backup. It might not work though.
Click to expand...
Click to collapse
Hey Mrbtree, thanks for the reply . I came across the nandroid backup from here, http://forum.xda-developers.com/showthread.php?t=1975140 , but the versions need to match, don't they ?
What happens if you install a RUU / Nandroid with a different CID ? I've come across a couple of backups with the correct Main Version and Radio version.. just different CID.
At the moment, I managed to install Android Revolution HD 33.1, which I think is JB.. seems ok..
I've been able to flash my 4.1 backup after I updated to 4.2.2 but not sure how 4.1 to ics will work or if it will. I would just try and restore the optus ics nandroid from the thread if it works, it works if not I would just stick with Android revolution.
Le Widget said:
Hi guys,
Hoping someone can help me.
I've got a HTC One X that is currently stuck on the HTC splash screen. looks like previous owner unlocked it, as it had a version of CWM as Recovery.
I'm wanting to Restore the phone back to Original Stock Firmware/ROM (JB or Higher if available), but so far, with all the Tutorials and such I've read through, the links in a lot of them seem to be no more.
Phone details;
C:\Android\HTC One X>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.980.27
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3669mV
(bootloader) devpower: 47
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Bootloader Details
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 1. 36. 0000
CPLD - None
MICROP - None
RADIO - 5. 1204. 162. 29
eMMC - bootmode: Disabled
CPU-bootmode: Disabled
HW Secure Boot: Enabled
Modem Path: OFF
-----------------------------------------------
So far, I've only come across an RUU file named;
RUU_ENDEAVOR_U_ICS_40_Optus_AU_1.28.980.10_Radio_1.1204.103.14_release_258004_signed.exe
But it appears to be ICS, a lower version and different Radio...
Is there an 'RUU' that's more Stock, maybe a ROM directly from HTC?
If I get an Optus RUU... does that mean it'll have all that Optus bloatware in it ?
From reading around, I believe I'll need 3x files?
- Stock Recovery Image
- Firmware Image
- Boot Image (not sure what this is for, last custom rom I tried didn't mention flashing this file.. what's it for?)
Any help would be awesome! if you need any additional info, please let me know.
Thanks
Click to expand...
Click to collapse
You can try this method: search for "OneX Modder", download them, open and flash stock recovery. Then with this tool relock your bootloader. (the tool was made by me ) Then download the ruu (as you as said), run it and wait. When the process is completed, boot up the phone and update them via Update app. You will get JB (4.2.2) and a few little updates. Install them and you are done!
Giovix92 said:
You can try this method: search for "OneX Modder", download them, open and flash stock recovery. Then with this tool relock your bootloader. (the tool was made by me ) Then download the ruu (as you as said), run it and wait. When the process is completed, boot up the phone and update them via Update app. You will get JB (4.2.2) and a few little updates. Install them and you are done!
Click to expand...
Click to collapse
You can try this method: search for "OneX Modder", download them, open and flash stock recovery. Then with this tool relock your bootloader. (the tool was made by me ) Then download the ruu (as you as said), run it and wait. When the process is completed, boot up the phone and update them via Update app. You will get JB (4.2.2) and a few little updates. Install them and you are done!
Click to expand...
Click to collapse
Thanks Giovix, Ill check it out . At the moment I ended up flashing Android Revolution HD, which seems to be running well ... though am considering selling the phone, so will certainly check out that update and see how that goes
Le Widget said:
Thanks Giovix, Ill check it out . At the moment I ended up flashing Android Revolution HD, which seems to be running well ... though am considering selling the phone, so will certainly check out that update and see how that goes
Click to expand...
Click to collapse
You're welcome. I will not sell up my one x anymore