Ok folks,when I go into the dialer settings and click edit,enter my MSL and press "ok" nothing happens, what would be the problem? i know it's 000000
How do you know it's 000000? How did you get your number? You're putting ##3282# in the dialer, correct?
Related
when i dial ##778# and go to edit, and enter the 000000 it says invalid code, i just flashed with the omj rom, everything is good, just no service, i need to enter my a-key, and i cant get into edit!!!! please help
neomaximus10 said:
when i dial ##778# and go to edit, and enter the 000000 it says invalid code, i just flashed with the omj rom, everything is good, just no service, i need to enter my a-key, and i cant get into edit!!!! please help
Click to expand...
Click to collapse
Use search
http://forum.xda-developers.com/showthread.php?p=2556512#post2556512
Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.
download msl reader from the market, and it'll give you the 6 digit code. You can remove the battery from the phone, and read off the meid number, and make sure the information matches the actual phone you have.
I'm not sure I understand. I have downloaded a msl reader and it did not work. Are you advising I download an another/different msl reader?
Naw, its the same one. The app asks for super user permissions, then gives you a 6 digit code? Also, your bootloader shows s-off?
WhoreDog said:
Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.
Click to expand...
Click to collapse
You may want to do a Factory Reset from Menu > Settings > SD & phone storage > Factory data reset.
After the phone reboots, it may go through the hands free activation. If it does, you're set. If not, by this time you should be able to enter the MSL. I would recommend doing a Data Profile restore by opening up the virtual keypad, typing ##DATA#, entering your MSL, going to Edit Mode and then selecting Data Profile. You'll be taken to the Data Profile page. Once you're there, press the Menu button on the phone and tap on the Restore option. Phone will reboot.
I did this even after rooting with Unrevoked3 and encountering the same issue and it worked.
I'm using roboto mod and my device can't send text messages. then i changed ROM to modpunks CM9 but it still fails . how did you think its my phone or ics mistake?
Try stock rom. If the problem persists it will be phone's problem .
Can you see incoming messages?
dady000 said:
Can you see incoming messages?
Click to expand...
Click to collapse
yes
Check SMS settings. maybe SMS carrier number is required!
If yes then check your operator SMSC number. I have this problem too. Go to your dialer and type *#*#4636#*#* don't call to this number. It open debug menu. Go to the first (Information about phone) and find "SMSC:" (It is somewhere down.) Then type in your operator SMSC number and press Update. I found my operator SMSC on google. Try this. Hope this help.
dady000 said:
If yes then check your operator SMSC number. I have this problem too. Go to your dialer and type *#*#4636#*#* don't call to this number. It open debug menu. Go to the first (Information about phone) and find "SMSC:" (It is somewhere down.) Then type in your operator SMSC number and press Update. I found my operator SMSC on google. Try this. Hope this help.
Click to expand...
Click to collapse
THANKS THANKS THANKS MAN!!!! You sooooo helped i get 1GB free internet data on my phone ^^
Got a few questions specifically regarding the new aokp JellyBean rom for the Epic, and I thought I'd post them here since the original thread got shut down:
1. Is there any way to get the "enter" button to not send messages in the SMS application?
2. Is there any way to prevent the "mount your USB storage!" popup from coming up every time the device is connected to a computer?
3. Back on the samsung based roms, I was able to to type ##debug## to get to a menu where I could force 1xrtt mode for extremely low signal situations. In the new rom, I found you can get to that same menu by typing in *#*#debug#*#*, but any screen prompting for the msl code is now impassable. I know my msl code, but it gives me a "modem error" no matter what I type and asks "modem exception occurs", to which the only option is "yes" (clicking it just closes the application).
Any way to get around this?
Thanks
b
Bill720 said:
Got a few questions specifically regarding the new aokp JellyBean rom for the Epic, and I thought I'd post them here since the original thread got shut down:
1. Is there any way to get the "enter" button to not send messages in the SMS application?
2. Is there any way to prevent the "mount your USB storage!" popup from coming up every time the device is connected to a computer?
3. Back on the samsung based roms, I was able to to type ##debug## to get to a menu where I could force 1xrtt mode for extremely low signal situations. In the new rom, I found you can get to that same menu by typing in *#*#debug#*#*, but any screen prompting for the msl code is now impassable. I know my msl code, but it gives me a "modem error" no matter what I type and asks "modem exception occurs", to which the only option is "yes" (clicking it just closes the application).
Any way to get around this?
Thanks
b
Click to expand...
Click to collapse
1: press the function key before enter.
2: No idea.
3: Have you tried using voice search to access the menu? Also, you could buy ROM Control for this.
Sent from my SPH-D700 using Tapatalk 2
2. Turn on USB debugging in Settings - Developer Options. If you can't find it, go to Settings - About phone, tap Build number 7 times and return.
Sent from HTC Incredible S @ CM10.1
cq
nikon120 said:
1: press the function key before enter.
Click to expand...
Click to collapse
Sorry, I should've been more specific. I was actually aware of this, but I was hoping that there would be a way to change this functionality on the stock messaging application so that I don't have to hit the Fn key to get the enter button to do what it's supposed to do.
nikon120 said:
3: Have you tried using voice search to access the menu? Also, you could buy ROM Control for this.
Click to expand...
Click to collapse
It's not that I can't access the menus, it's that some parts of the menus prompt for my MSL code before I can access them, and for some reason, typing in my MSL code (000000) doesn't do the trick anymore, it just gives me that "Modem Error" and lets me know that a "Modem exception occurs". My only choice in the dialog is "Yes", but that just exits the menu completely.
AndyYan said:
2. Turn on USB debugging in Settings - Developer Options. If you can't find it, go to Settings - About phone, tap Build number 7 times and return.
Click to expand...
Click to collapse
I actually do have USB debug enabled already and a widget to easily toggle it off for use with computers that don't have the driver installed. I see the popup upon USB connection with USB debug enabled or disabled.
b
Bill720 said:
It's not that I can't access the menus, it's that some parts of the menus prompt for my MSL code before I can access them, and for some reason, typing in my MSL code (000000) doesn't do the trick anymore, it just gives me that "Modem Error" and lets me know that a "Modem exception occurs". My only choice in the dialog is "Yes", but that just exits the menu completely.
Click to expand...
Click to collapse
I'm not sure if you're saying your MSL code is 000000, or if you were using zeros as placeholders. If you are saying that your MSL is 000000, that would be very unlikely. To get your correct MSL, use a Terminal Emulator of your choice and type "su" and press enter, then "getprop ril.MSL" press enter again and you should see your MSL. Also, you wouldn't happen to be using a NS4G modem, would you? I'm not too sure on ways to fix this, because it hasn't happened to me.
Sent from my SPH-D700 using Tapatalk 2
q
jeffreyjicha said:
I'm not sure if you're saying your MSL code is 000000, or if you were using zeros as placeholders. If you are saying that your MSL is 000000, that would be very unlikely. To get your correct MSL, use a Terminal Emulator of your choice and type "su" and press enter, then "getprop ril.MSL" press enter again and you should see your MSL. Also, you wouldn't happen to be using a NS4G modem, would you? I'm not too sure on ways to fix this, because it hasn't happened to me.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Good question - My MSL is, as a matter of fact 000000, (I even doublechecked with the terminal on the off chance that something changed it) because I changed it to that to make it easier to access in CDMA workshop, qpst, and qxdm back when I was working to clone my old phone's service so that I could continue using my sprint sero $30 unlimited data plan.
As for the modem, I am still using the stock Epic EL30 modem. Would this be causing the problem? And if you don't mind sharing, which rom and modem are you using? What happens when you dial *#*#DEBUG#*#* at the dialer?
Thanks
b
Bill720 said:
As for the modem, I am still using the stock Epic EL30 modem. Would this be causing the problem? And if you don't mind sharing, which rom and modem are you using? What happens when you dial *#*#DEBUG#*#* at the dialer?
Click to expand...
Click to collapse
Like I said, I'm not sure what causes the modem exception error. I'm using Effsi's 0611 build of PACman ROM with didhiy's 0606 nitest, and the NS4G LF2 modem. And when I dial that, it prompts for the MSL, I put in my MSL and it goes to the debug menu with no problem.
Sent from my SPH-D700 using Tapatalk 2
How can change MSL to 000000 Sprint V4.3
i have MSL code ,but need to change it to 000000
old method with V412 not work
please help
MSL utility
Jxt. said:
How did you get your code?
Click to expand...
Click to collapse
I used this App, it worked for me
MSL utility
You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.
good job
done:good:
done
thanks:highfive:
t
angelglz said:
You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.
Click to expand...
Click to collapse
please explain more. i have downloaded it but the "2" is not understandable by me
update
i understand the number 2 but "Read the actual SPC." is the one giving me problem , though i am using 3.7 verison and i am using sprint s4.
what will i do?