Hello, i was using my phone that came with my N7100 (with 3 buttons) in a Sammy base ROM, and all was working fine.
Now i switched to ProBAM ROM (ASOP - CM,AOKP & Paranoid) and the buttons didn't work, somethimes only 1 buttons work, and not not even 1 working (i know that is not a hardware problem).
Somethime ago i get off CM because the buttons didn't work too, so a get back to TW and all fine.
I asked in the official ProBAM threat, but no answers.
Thanks since now
Related
Hi,
I've purchased a a Samsung Galaxy 551 (I5510) (Middle east region) about a year ago and i was running android 2.2 fine for a while. When the Gingerbread 2.3 update came out i tried installing a European ROM because the ME ROMs weren't updated, it worked fine but had a weird glitch that if the screen was off (phone still working) for a while it would be very dark when turned on afterwards, it looked like this video:
http://www.youtube.com/watch?v=Kwll8ZfgaD0
P.S. I didn't make the video, just linking it because its the same issue
it would randomly work again after a couple of lock-screen off-unlock cycles, then happen again randomly when it's off
I tried a number of GB ROMs (mostly 2.3.4) but to no avail, then finally the latest EU ROMs (I5510XWKPJ) fixed the problem, nowhere to be seen anymore.
After that i tried installing Cyanogen mod for the phone and the problem came back with different degrees:
1. Cyanogen 7 - normal boot, screen gets dark after being off for a while.
2. Cyanogen 9,10 - show Samsung logo at start, screen gets dark as soon as the cyanogen logo appears and continues to be
Any help on what would be causing that especially on the newer CM builds? and why it doesn't happen at all in (I5510XWKPJ)
Thanks in advance,
use stock gb rom XEO-KPG from here...u find no bug in it....install as one pakage through odin...
http://galaxy551.wordpress.com/2011/12/20/new-stock-rom-xeo-kpg/
I will give it a try, though i have to clarify and say that on the current stock rom that i'm using (I5510XWKPJ) the problem doesn't happen. It only happens after i flash Cyanogenmod (any version) and persists till i reflash the Stock rom then it disappears again.
EDIT: Forgot to add that this isn't a CM specific bug as it happened also when i tried other roms too (Arkas, Miui,...)
You cannot say that this is a bug bcaz no other mamber of galaxy 551 and even me also not have this kind of problem....
So I think its problem of ur phone...
Sent from my GT-I5510 using xda premium
No change after installing (XEO-KPG) stock rom, the rom itself works fine with no problems, same as the (XWKPJ) I've been using. but as soon as i install CM the bug rears it's ugly head.
priyesh103 said:
You cannot say that this is a bug bcaz no other mamber of galaxy 551 and even me also not have this kind of problem....
So I think its problem of ur phone...
Sent from my GT-I5510 using xda premium
Click to expand...
Click to collapse
The reason i think it's a bug because it happens across lots of custom roms (which rules a rom being the cause) and it never happens when using the 2.3.6 stock roms. And on the custom roms it only happens after the screen has been off for a while, if i set the screen to never turn off for instance it never happens, but that butchers battery life.
IMO it might be a display driver issue, but since i have no experience with it i came here to get some help
Bump, any help would be appreciated.
Hi there!
Do anyone know if ROMs cooked for Ace II would work on Ace IIx (GT-s7560M) and, in consequence, on Galaxy Trend (GT-s7560)?
I'm asking because due to the low popularity od Trend, I can choose from stock TouchWiz ICS and this http://forum.xda-developers.com/showthread.php?t=2292696, which is also ICS and that doesn't satisfy me. As I can see, there are lots of JB ROMs for Ace II, hence the question.
Thank you for your answers
No. I see cm10.1(or 10.2, whatever) for ace 2x, thats android 4.2(jb) why not use that
Sent from my GT-I8160 using Tapatalk
Unfortunately, it's not that easy. You could attempt to port a ROM from the Ace 2, but it wouldn't be bugfree. Getting it booted would be a feat. Like the previous commentor said, there is a CM10.2 and CM11 (JB and KK ROMs) ROM for the Ace II X, though it isn't completely bug free. You could also try my Mod Pack (link in my sig) for the stock ICS ROM. The next update will include some AOSP ICS themed visuals, so it'll make stock ROM feel more AOSP and less Samsung-y.
Well, I haven't noticed at first, there's even 4.3 ROM cooked for Ace IIx ( http://forum.xda-developers.com/showthread.php?t=2518416&highlight=ace+iix ), thanks for hints.
I'll try to set it up and running later today and confirm if it does the trick on Trend.
Brachacz said:
Well, I haven't noticed at first, there's even 4.3 ROM cooked for Ace IIx ( http://forum.xda-developers.com/showthread.php?t=2518416&highlight=ace+iix ), thanks for hints.
I'll try to set it up and running later today and confirm if it does the trick on Trend.
Click to expand...
Click to collapse
AFAIK, YoshiShaPow's Slimbean doesn't work. Bootloops. If you want a good ROM (and pretty much the only real custom ROM), try SeannyM's CM builds. There's 10.2 and 11 (Android 4.3 Jellybean and 4.4 Kitkat). All the source built ROMs for the Ace II X are currently buggy. There in his signature here. They'll definitely work with the Trend, but I'm not sure about RIL compatibility with the Trend. If it doesn't work, you can try flashing the Ace II X 'MG2 firmware from Sammobile with Odin, then installing CM.
For future seekers:
Well, after hours of flashing, wiping and testing, it's CM 10.2 ported by SeannyM which appears the best ROM for Galaxy Trend (originally meant for Ace IIx), CM11 has less features, ART doesn't work like it should and it's too buggy tu use so far. 10.2 has a couple of bugs but it's definitely usable as a daily driver. The most gear-grinding bugs are:
WiFi (either you have it turned on all the time or after turning it off you have to turn it on back again and reboot your device, otherwise it won't connect to any network saying 'authentication problem occurred'. That can also be a RIL issue with my device, as you've stated above),
Bluetooth, which simply doesn't work yet
Camera - you can just download any other camera app from play or whatever.
Some may also consider message which shows up after entering PIN ("a SIM card has been detected; reboot your device to install it" or something like that) a problem. You just bypass it by pressing 'back' button and everything's fine.
I use it with JB gapps and 1208MHz kernel, both also got to work by SeannyM, he has links to download all of them goodies in his signature.
Thanks for all the hints
I recently bought an Ace IIx, I quickly found out that it is different from the Ace II and there are less custom rom available. I would flash CM10.2 but I need bluetooth in my car, so I can't use CM10.2 until bluetooth is fixed.
For now, I'm running Daver's MG2 deodexed stock rom and I added a few tweaks (patched services.jar, installed busybox and enabled init.d support). Now, I would like to know if there are some init.d scripts available to improve performance?
Hello.
I have a Galaxy trend s7560
Root is working and cwm 5.x
Also. I flashed cm11 Android 4.4
On it from the Ace 2x.
This is working fine.
Greets from holland.
i tried Cyanogenmod 11 nightly, , CM11 Linaro and SlimKat 4.4, and everywhere i have the same problem, only the front camera works. in stock roms like LRS, everything is fine, as expected. i tried different camera apps, but the problem remains the same, the camera doesn't work, only the front camera does. there isn't even a button in the camera app to switch between back and front camera, as if i only have one.
is there a fix or a workaround for this? not having a camera is a dealbraker for me, but i really don't want to stay stock. i flashed multiple times, used different gapps versions, did factory resets and reboots, nothing seems to help, the stock version was 4.4.2 v50020. anyone else experiencing such problems?
WEIRD!!!!
I'm having the same problem. My Gpad came from the factory with 4.4.2 installed. and when I try to put any custon rom, this problem is with the camera. any solution? :crying:
Yes. The same problem. Maybe cyanogen team (Bug: CYAN-4444) can find solution.
same problem here, tryied every rom and kernel and nothing. only stock firmware back camera works.. can anyone help us?
read in one SlimKat thread that using the Google Camera from play store would work with all the custom roms, since it uses a different API than other apps.
Haven't tried myself, but you can give it a try
Google camera doesn't work better for me. This is very annoying
effraie said:
Google camera doesn't work better for me. This is very annoying
Click to expand...
Click to collapse
For me neither. Also in the latest builds where infected said the back camera should be fixed, it doesn't work for me.
The problem with camera is present on not only custom roms. It exists on official v50010a firmwares after downgrade. Possibly it's driver\kernel problem, which is caused distinction in camera's modules. Maybe new revisions of the G Pad use some other modules, than older ones.
Any directions to fix it ?
IMHO, they need to get out driver for camera from official 20a. But how it function with kernel, this is the big question that must be solved.
So, there is nothing i can do, except waiting somebody solving that issue ? No mistake on my side ?
Having no back camera is really not a problem to me, but i can't stand having something misconfigured...
Both cameras working for me slimkat 6.2
Not for me....
Some have problem... most don't, something different about your gpads ?
Sent from my Kin[G]_Pad ™
Rear camera not working too
Hi
For me the rear camera won't work too.
My G Pad is a V50020d with stock 4.4.2. I installed the Cyanogenmod 11 via CWM Philz Touch.
Same problem here
tried cm11, paranoid e now um on mahdi, no back camera on any of 3 roms
I haven't tested other custom roms, but Infected's CM11 M9 won't fix the back camera for me.
My G Pad (stock V50020a) is made in Brazil, there might be something to do with this driver or component-wise.
There is a source codes of the last firmware and kernel for the g pad on the lge site.
Maybe, it will help developers to add support for our camera module in the cyan kernel.
Same problem here... Spanish lg g pad 1 month of use
Which one would you recommend? Which one is still updated?
(I have tried to use the CM/AOSP mods, but they all suffer from low volume issues.
A kind user informed that none of the workaround methods work to raise the volume and that there is no fix for the situation. (while I really loved the CM and L based roms.))
Thank you.
I did try to install SlimWiz Colors now, but it says "Insert sim card."
Hello,
I'm pretty new to this and had installed CM12.1 before but wasnt as happy as I'm now with DN4.
Cause of the S pen functions and 3G working but might go to CM when it's finished maybe to test it out.
Now I was wondering if with DN4 v2.1 if you can install a different launcher instead of what it has now.
And can use it on CM 12.1 I tried but it didn't work as it crashed my firmware. Now DN4 currently works perfect but still would like to try a different launcher and before I test it and maybe screw up the firmware
I was wondering if someone could tell me if it's possible.
Many thanks much appreciated.