Develop Bugs

[Help] Can't find the right RUU for my phone to get back to Stock

Model: HTC ONE X
Region: EUROPE (originally debranded)
CID: HTC__023
hboot: 1.39.0000
main: 3.20.401.1
I have found the following RUU:
But the version is lower than the one installed in my phone (from 3.20.XXX.X to 3.14.XXX.X).
I have also found a nandroid backup for my CID on the XDA-Developers thread, but it is also older:
"Nandroid Backup 3.17.728.1 CID HTC__023 thanks to adamnz"
Will any of those work as I am not S-OFF?
Here is the output of the fastboot command in case it helps
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: HT23ZW116643
(bootloader) imei: 359188044319390
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3980mV
(bootloader) devpower: 85
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Thanks in advance!

jfromeo said:
Model: HTC ONE X
Region: EUROPE (originally debranded)
CID: HTC__023
hboot: 1.39.0000
main: 3.20.401.1
I have found the following RUU:
But the version is lower than the one installed in my phone (from 3.20.XXX.X to 3.14.XXX.X).
I have also found a nandroid backup for my CID on the XDA-Developers thread, but it is also older:
"Nandroid Backup 3.17.728.1 CID HTC__023 thanks to adamnz"
Will any of those work as I am not S-OFF?
Here is the output of the fastboot command in case it helps
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: HT23ZW116643
(bootloader) imei: 359188044319390
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3980mV
(bootloader) devpower: 85
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Thanks in advance!
Click to expand...
Click to collapse
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.

surrealjam said:
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.
Click to expand...
Click to collapse
Thanks a lot mate

jfromeo said:
Thanks a lot mate
Click to expand...
Click to collapse
No problem. Obviously you'll have to go back to the stock recovery which is here.

surrealjam said:
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.
Click to expand...
Click to collapse
surrealjam said:
No problem. Obviously you'll have to go back to the stock recovery which is here.
Click to expand...
Click to collapse
Thanks again!

I have done the following steps:
1. Flashed the boot.img from the backup through fastboot
2. Entered CWM recovery (5.8.4.0)
3. Wiped data, cache and factory reset
4. Restored backup
But it always give me an error: "Error while restoring /system". All the previous checks and actions go as expected. I tried to redownload the backup and got no luck.
Anyone knows why is giving this error? Perhaps the nandroid backup I have downloaded needs to be restored with the same recovery and version of the original one?

Because you didn't wipe the system partition in recovery.
Under mounts and storage - format cache, data and system
And flash the recovery.img from the nand backup if you have the same problem after the above !

Mr Hofs said:
Because you didn't wipe the system partition in recovery.
Under mounts and storage - format cache, data and system
And flash the recovery.img from the nand backup if you have the same problem after the above !
Click to expand...
Click to collapse
Thanks a lot.
I will try it as soon as I get home.
One question about flashing the recovery. The recovery from the nand backup is the CWM recovery right? I am scared of flashing some offical recovery and then not being able to access the CWM one.

You can safely flash the recovery from the nand. It's the custom one, it's the one which the nand is made with.

Mr Hofs said:
You can safely flash the recovery from the nand. It's the custom one, it's the one which the nand is made with.
Click to expand...
Click to collapse
Thanks a lot for your kind help

Great, the backup process ended correctly!
surrealjam said:
No problem. Obviously you'll have to go back to the stock recovery which is here.
Click to expand...
Click to collapse
Now I have a doubt about the recovery I have to flash. Need I to flash the stock one for this RUU or is it independent? I mean, surrealjam point to a stock recovery for the 3.14.XXX.X version, but I am now on the 3.20.401.1 stock. Do I need to flash a "newer" stock recovery, matching the ROM version?

jfromeo said:
Great, the backup process ended correctly!
Now I have a doubt about the recovery I have to flash. Need I to flash the stock one for this RUU or is it independent? I mean, surrealjam point to a stock recovery for the 3.14.XXX.X version, but I am now on the 3.20.401.1 stock. Do I need to flash a "newer" stock recovery, matching the ROM version?
Click to expand...
Click to collapse
I believe 3.14 is the latest stock recovery available and will be fine with the 3.20 firmware. Perhaps Mr Hofs may be able to provide further info though.

Here is the 3.20 one
https://www.dropbox.com/s/pqp1p3tgvyod610/Stock recovery 3.20.img

Thanks Mr Hofs and surrelajam!
Everything went correct

Good !
CASE CLOSED !

Please I have a similar problem!
A friend of mine gave someone her phone who probably tried to update it using fastboot and recovery, but did not succeed. Now the phone can't get past the HTC logo. I don't know what exactly he did to the phone so I'm working on very little. Been up since late last night checking how to fix this. I tried flashing a new custom rom with both twrp and cwm using both sideload and otg cable. With TWRP the process just stops abruptly when flashing system, while it completes in cwm and still the phone doesn't boot. I also notice that both recoveries can't mount system, can't mount cache. but can only mount data.
I then read in a thread that if I can't mount I have to flash RUU with fastboot. I have searched RUU with my main version and the closest I got was a sprint version. But after sending in fastboot I get "12 signature verify failed". I searched for this and I was told it's because I don't have the correct version for my device. Below I've attached an image of my bootloader information, please help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some reason the version-main is now blank, but it used to be 1.29.651.10. And all I've found for this version are Sprint roms, but the device is not sprint it's international version.

emmalad92 said:
A friend of mine gave someone her phone who probably tried to update it using fastboot and recovery, but did not succeed. Now the phone can't get past the HTC logo. I don't know what exactly he did to the phone so I'm working on very little. Been up since late last night checking how to fix this. I tried flashing a new custom rom with both twrp and cwm using both sideload and otg cable. With TWRP the process just stops abruptly when flashing system, while it completes in cwm and still the phone doesn't boot. I also notice that both recoveries can't mount system, can't mount cache. but can only mount data.
I then read in a thread that if I can't mount I have to flash RUU with fastboot. I have searched RUU with my main version and the closest I got was a sprint version. But after sending in fastboot I get "12 signature verify failed". I searched for this and I was told it's because I don't have the correct version for my device. Below I've attached an image of my bootloader information, please help!
View attachment 2825096
For some reason the version-main is now blank, but it used to be 1.29.651.10. And all I've found for this version are Sprint roms, but the device is not sprint it's international version.
Click to expand...
Click to collapse
You have a M7...a HTC ONE ?! This is the HTC ONE X forum.you are definitely in the wrong forum !!!

Out of options, phone fails to work.

Hey all, i have a bit of problem here.
To days ago my M8 started to randomly turn off , and now it`s happening more and more often , to point where it is impossible to use.
Before it started it got a bit hot, not to hot, regular htc hot.
Tried: Blues GPE,Lypota GPE (was on this one before things happened), Sky dragoon GPE
Things i tried:
*Reflash rom - FAIL
*Flash diffrent rom - FAIL
*Reroot phone - FAIL
*Wipe everything root again - FAIL
*Start fresh without restoring anything - FAIL
How does this sudden turn off happen:
It`s fine, when it`s plugged in and charging, sometimes not, tried to test GPE maybe one of them fails, it`s random. When i remove phone from power it works for a while if i don`t press any app, but again it`s like a lottery , sometimes it works for longer sometimes it just dies, and i get more or less stuck on system not booting.
Do anybody have any suggestions ?

boomboxie said:
Hey all, i have a bit of problem here.
To days ago my M8 started to randomly turn off , and now it`s happening more and more often , to point where it is impossible to use.
Before it started it got a bit hot, not to hot, regular htc hot.
Tried: Blues GPE,Lypota GPE (was on this one before things happened), Sky dragoon GPE
Things i tried:
*Reflash rom - FAIL
*Flash diffrent rom - FAIL
*Reroot phone - FAIL
*Wipe everything root again - FAIL
*Start fresh without restoring anything - FAIL
How does this sudden turn off happen:
It`s fine, when it`s plugged in and charging, sometimes not, tried to test GPE maybe one of them fails, it`s random. When i remove phone from power it works for a while if i don`t press any app, but again it`s like a lottery , sometimes it works for longer sometimes it just dies, and i get more or less stuck on system not booting.
Do anybody have any suggestions ?
Click to expand...
Click to collapse
UPDATE: Seems like it`s mostly happening when installing new apps, or recovering them. Tried to remove sdcard , did`t help.

boomboxie said:
H
Things i tried:
*Reflash rom - FAIL
*Flash diffrent rom - FAIL
*Reroot phone - FAIL
*Wipe everything root again - FAIL
*Start fresh without restoring anything - FAIL
Click to expand...
Click to collapse
When you say "FAIL" you mean these things actually don't happen successfully (fail to flash, etc.); or that the random power off persists?
Are you converted to GPE by RUU? Maybe try to RUU to full GPE "stock" and see if that helps.
You may be looking at a bad battery or some other hardware failure (emmc).

redpoint73 said:
When you say "FAIL" you mean these things actually don't happen successfully (fail to flash, etc.); or that the random power off persists?
Are you converted to GPE by RUU? Maybe try to RUU to full GPE "stock" and see if that helps.
You may be looking at a bad battery or some other hardware failure (emmc).
Click to expand...
Click to collapse
Depends some rom fail to flash some works. After flashing power off problem persists. As for now, i`m not able to turn on phone without power cord, but once it`s one, works fine unless i do anything (starting an app and so on)
At the beginning i used Hanson2000`s toolkit to root the phone, and after that installed GPE room.
Will try to convert to stock GPE with RUU and update on results.

boomboxie said:
Depends some rom fail to flash some works. After flashing power off problem persists. As for now, i`m not able to turn on phone without power cord, but once it`s one, works fine unless i do anything (starting an app and so on)
At the beginning i used Hanson2000`s toolkit to root the phone, and after that installed GPE room.
Click to expand...
Click to collapse
The toolkit hasn't been updated since April 2014! It contains woefully obsolete version of TWRP, and that is probably why some ROMs are failing to flash. Highly advise to update to current TWRP 3.0.
How long have you had the phone, how long on GPE ROMs? Is the firmware up to date?
Do fastboot getvar all, and post the output (delete IMEI and serial number before posting).
boomboxie said:
Will try to convert to stock GPE with RUU and update on results.
Click to expand...
Click to collapse
You can only do this if you have s-off.
You may want to try to RUU back to your stock (probably Sense) version, and see if the random power offs persist.

To me it looks like a hardware fail, most likely a bad battery. OP says it works when plugged in but dies when not.
My guess ,if all else fail ,is to try a new battery

redpoint73 said:
The toolkit hasn't been updated since April 2014! It contains woefully obsolete version of TWRP, and that is probably why some ROMs are failing to flash. Highly advise to update to current TWRP 3.0.
How long have you had the phone, how long on GPE ROMs? Is the firmware up to date?
Do fastboot getvar all, and post the output (delete IMEI and serial number before posting).
You can only do this if you have s-off.
You may want to try to RUU back to your stock (probably Sense) version, and see if the random power offs persist.
Click to expand...
Click to collapse
I have newest TWRP installed.
For about 2 years for now. Converted to GPE ever since i got the phone. Yes firmware is up to date.
I can`t seem to manage to make "fastboot getvar all" to work, or i don`t know how.

boomboxie said:
I have newest TWRP installed.
For about 2 years for now. Converted to GPE ever since i got the phone. Yes firmware is up to date.
Click to expand...
Click to collapse
Be careful with your terminology there, to avoid confusion. From your previous post, you stated you just flashed a GPE ROM.
This isn't the same as "converting" to GPE with RUU, which puts you on GPE firmware, GPE partitioning, etc.
boomboxie said:
I can`t seem to manage to make "fastboot getvar all" to work, or i don`t know how.
Click to expand...
Click to collapse
I don't know what that means, if you don't give details on what you did, and the specific results. But I'm assuming you know how to use command prompt to issue adb/fastboot commands, entered the command, and get no response (or device offline)?
If so, check that you are in bootloader-fastboot mode, have HTC drivers installed, or try different cable or USB port.
---------- Post added at 12:04 PM ---------- Previous post was at 12:03 PM ----------
bombo_b said:
To me it looks like a hardware fail, most likely a bad battery. OP says it works when plugged in but dies when not.
My guess ,if all else fail ,is to try a new battery
Click to expand...
Click to collapse
I tend to agree that its a hardware problem. But its always a good idea to return to full stock by RUU, to eliminate the possibility its a software issue, before concluding its a hardware problem.

boomboxie said:
I have newest TWRP installed.
For about 2 years for now. Converted to GPE ever since i got the phone. Yes firmware is up to date.
I can`t seem to manage to make "fastboot getvar all" to work, or i don`t know how.
Click to expand...
Click to collapse
1) at first go to bootloader
2) connect device via usb cable into pc
3) confirm you are in fastboot mode
4) install drivers through htc sync manager
5) download the following zip
6) at first create a new folder in desktop. then copy zip into that folder & extract.
7) while press ''shift'' right clik on the new folder & select ''open command window here''
8) on the command prompt type fastboot getvar all

I managed to run command: here are the results.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s

Disregard this post.Sorry

boomboxie said:
I managed to run command: here are the results.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
Click to expand...
Click to collapse
You are still with kitkat firmware. Your version is 3.28.401.9. Try to go to a stock. Confirm whether your problem is a hardware problem or not.

umesh.lk said:
You are still with kitkat firmware. Your version is 3.28.401.9. Try to go to a stock. Confirm whether your problem is a hardware problem or not.
Click to expand...
Click to collapse
What would be the best way to do that ?

boomboxie said:
What would be the best way to do that ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Restore stock ROM and stock recovery for 3.28.401.9, then OTA update up to current MM.
---------- Post added at 01:41 PM ---------- Previous post was at 01:39 PM ----------
boomboxie said:
I have newest TWRP installed.
Yes firmware is up to date.
Click to expand...
Click to collapse
As I've often found to be the case here, folks claim to be "up to date" without providing any specific details or version numbers, and it turns out they are very much not up to date.

redpoint73 said:
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Restore stock ROM and stock recovery for 3.28.401.9, then OTA update up to current MM.
---------- Post added at 01:41 PM ---------- Previous post was at 01:39 PM ----------
As I've often found to be the case here, folks claim to be "up to date" without providing any specific details or version numbers, and it turns out they are very much not up to date.
Click to expand...
Click to collapse
Thanks, will update on outcome.
EDIT: I thought i was "up to date" i guess i wasn`t lol, my bad.

UPDATE:
Flashed stock rom, did all the updates, nothing has changed same issue persists: Turning off, seem like it`s 90% chance of battery failure.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
https://www.youtube.com/watch?v=F2SetwqZzKE <- Filmed how it happens/

boomboxie said:
UPDATE:
Flashed stock rom, did all the updates, nothing has changed same issue persists: Turning off, seem like it`s 90% chance of battery failur
https://www.youtube.com/watch?v=F2SetwqZzKE <- Filmed how it happens/
Click to expand...
Click to collapse
At first did you calibration the battery? Is your device still Hot? It's amazing as you could install an ota in such a situation. Turn off Wi-Fi and then check. You're still 50% Battery problem, you have more works to do.

umesh.lk said:
At first did you calibration the battery? Is your device still Hot? It's amazing as you could install an ota in such a situation. Turn off Wi-Fi and then check. You're still 50% Battery problem, you have more works to do.
Click to expand...
Click to collapse
Did calibration of battery with Power+vol up/down method, went to safe mode problem still persists.
No problems with booting into boot-loader, dosn`t power off. once i try to access recovery powers off.
https://www.youtube.com/watch?v=5wgC8ST9lU4

boomboxie said:
Did calibration of battery with Power+vol up/down method, went to safe mode problem still persists.
No problems with booting into boot-loader, dosn`t power off. once i try to access recovery powers off.
https://www.youtube.com/watch?v=5wgC8ST9lU4
Click to expand...
Click to collapse
try to flash firmware through hboot. when it flash look whether sensor_hub.img flushing & flashing correctly happen. then reboot.

umesh.lk said:
try to flash firmware through hboot. when it flash look whether sensor_hub.img flushing & flashing correctly happen. then reboot.
Click to expand...
Click to collapse
By that you mean: Connecting phone to PC and flashing Newer recovery or OS ?

Software status modified (Relocked)

HTC m8 WHL xc ship s-on
Sent from my CHC-U01 using Tapatalk

Is there some issue, or question you want to ask? Since your post does not contain any.
What are you trying to do, what is the problem, etc.?
Also, what does it say for hboot number and OS number on the bootloader screen?

I want to Unlock bootloader again..
But.but when i put unlock code bin file by cmd it says remote unlock failed.
Sent from my CHC-U01 using Tapatalk

d.dipto89 said:
I want to Unlock bootloader again..
But.but when i put unlock code bin file by cmd it says remote unlock failed.
Click to expand...
Click to collapse
go and take another unlock code from htcdev website maybe will solve it
Sent from my HTC M8 using XDA Labs

htc dev Cant give me code again
Sent from my CHC-U01 using Tapatalk

Htc dev can not give me another code..
My software status Modified
Sent from my CHC-U01 using Tapatalk

d.dipto89 said:
Htc dev can not give me another code..
My software status Modified
Click to expand...
Click to collapse
i don't think so
Have you tried ?
Is your device s-on or off ?
Sent from my HTC M8 using XDA Labs

S-on. Yes i tried..
Sent From Tomato

d.dipto89 said:
Htc dev can not give me another code..
Click to expand...
Click to collapse
Meaning what? Did HTCDev give you a specific error message? You need to provide more detail. Making 1-2 sentence post is never enough info for anyone to help you.
You also sent a PM to me of your bootscreen. That isn't the proper place for communicating such things. Its why these forums exist. Keep the discussion unified. It avoids confusion, and lets multiple folks help you. Don't send random PMs, or jump around to other threads.
Your PM also didn't contain any text, details or explanation expect that your M8 was "dead" (which it isn't). It took me a while to even figure out who you were, and that you had an existing thread that I responded to. All the more reason to keep the discussion here on the forums.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent From Tomato

This is user error. You probably didn't cut/past the token properly.
---------- Post added at 10:02 AM ---------- Previous post was at 10:02 AM ----------
What is the exact sequence of step or events that got you to this point? What did you do so far, step by step, in detail?
---------- Post added at 10:05 AM ---------- Previous post was at 10:02 AM ----------
d.dipto89 said:
I want to Unlock bootloader again..
Click to expand...
Click to collapse
For what reason, root or to flash a custom ROM?

Custom recoverey, root and install rom..
I have unlock Code bin from dev but When i oem unlock by cmd Its error
Sent From Tomato

Sent From Tomato

Cool pic, bro.
Seriously, you need to add some explanation if there is a point you are trying to make. I'm not sure what you are trying to communicate with the pic. Are you trying to prove to us that you have the cut/paste right? Are you asking us if you have it right?
We can't help you if you continue to make 1-2 sentence posts, or post pics with NO sentences to explanation.
Get a computer keyboard to type a proper post, if you have to.

d.dipto89 said:
Custom recoverey, root and install rom..
I have unlock Code bin from dev but When i oem unlock by cmd Its error
Sent From Tomato
Click to expand...
Click to collapse
depto89
you should post the result of fastboot getvar all as i see it
Maybe redpoint have an opinion about it
@redpoint73
he have a complexed result of getvar all
Sent from my HTC M8 using XDA Labs

:\Users\Dipto\Desktop\platform-tools>fastboot get bootloader) version: 0.5 bootloader) version-bootloader: 3.19.0.0000 bootloader) version-baseband: INVALID_VER_INFO bootloader) version-cpld: None bootloader) version-microp: None bootloader) version-main: bootloader) version-misc: XC SHIP S-ON bootloader) serialno: 靁=L?} bootloader) imei: 352090065656450 bootloader) imei2: Not Support bootloader) meid: 99000499309570 bootloader) product: m8_whl bootloader) platform: hTCBmsm8974 bootloader) modelid: ? bootloader) cidnum: 11111111 bootloader) battery-status: good bootloader) battery-voltage: 0mV bootloader) partition-layout: Generic bootloader) security: on bootloader) build-mode: SHIP bootloader) boot-mode: FASTBOOT bootloader) commitno-bootloader: 8a0f02ff bootloader) hbootpreupdate: 11 bootloader) gencheckpt: 0 ll: Done! inished. total time: 0.016s :\Users\Dipto\Desktop\platform-tools>
Sent From Tomato

d.dipto89 said:
:\Users\Dipto\Desktop\platform-tools>fastboot get bootloader) version: 0.5 bootloader) version-bootloader: 3.19.0.0000 bootloader) version-baseband: INVALID_VER_INFO bootloader) version-cpld: None bootloader) version-microp: None bootloader) version-main: bootloader) version-misc: XC SHIP S-ON bootloader) serialno: ?=L?} bootloader) imei: 352090065656450 bootloader) imei2: Not Support bootloader) meid: 99000499309570 bootloader) product: m8_whl bootloader) platform: hTCBmsm8974 bootloader) modelid: ? bootloader) cidnum: 11111111 bootloader) battery-status: good bootloader) battery-voltage: 0mV bootloader) partition-layout: Generic bootloader) security: on bootloader) build-mode: SHIP bootloader) boot-mode: FASTBOOT bootloader) commitno-bootloader: 8a0f02ff bootloader) hbootpreupdate: 11 bootloader) gencheckpt: 0 ll: Done! inished. total time: 0.016s :\Users\Dipto\Desktop\platform-tools>
Sent From Tomato
Click to expand...
Click to collapse
Is your device from Sprint? I think this is where the problems lie. Have you tried to flash a custom ROM and it went wrong? Tell us what exactly you have done. Failing that, try the Sprint RUU to go back to stock. Try this, the manual download near the bottom. This will wipe your device.

redpoint73 said:
Cool pic, bro.
We can't help you if you continue to make 1-2 sentence posts, or post pics with NO sentences to explanation.
Get a computer keyboard to type a proper post, if you have to.
Click to expand...
Click to collapse
Hi sorry about that,i'm trying to help
OP can't explain his issue i will try to explain what he told me,after a long chatting
he have CDMA device ( product m8_whl )
supercid,invalid baseband version,invalid adsp version,a weird serialno and mid and all that beside the device s-on ( the earlier owner done a lot with that device and the current owner may be done something's completely wrong without knowledge )
i'm out of idea so i told him to explain it to you but he can't explain properly
he can't flash any firmware ( error 41 ) supercid didn't pass the check
so his goal to have a working device
can you give him some of your time please and help him to fix his device if it can be fixed
THANKS IN ADVANCE
Sent from my HTC M8 using XDA Labs

Einwod said:
Is your device from Sprint? I think this is where the problems lie. Have you tried to flash a custom ROM and it went wrong? Tell us what exactly you have done. Failing that, try the Sprint RUU to go back to stock. Try this, the manual download near the bottom. This will wipe your device.
Click to expand...
Click to collapse
the proper getvar all is here and he tried to flash RUU & firmware with no success error 41
he told me the long story and i can't help him
can you help him please
Sent from my HTC M8 using XDA Labs

yes bro First i Unlock Bootloader
install TWRP and Flash A custom rom..
but i think the custom rom is not suitable for it..
So that its bricked..
Sent From Tomato

Htc one m8 not booting into Os

i had installed (TWRP by chr0247 v2.8.0.3). then i installed new Os. but it always boots into bootloader. when i click mount button on recovery mode, the system partition is unticked. Is this a reason for my problem? i tried marking it(mounting) and rebooted my devices but still same problem. again it boots to bootloader, system is shown unmounted on mount option on opening recovery. my device is bricked and i am stuck since very long time. Plz any help would be greatly appreciated. bootloader is unlocked !

bhuwanpandey999 said:
i had installed (TWRP by chr0247 v2.8.0.3). then i installed new Os.
Click to expand...
Click to collapse
Where did you get that version TWRP? I don't recognize the user/source chr0247
Describe the source location, or obfuscate the link with some extra character (as I see you don't have enough posts to post a link).
Which ROM did you try to install?
That TWRP version is a bit old. I just have a feeling you have used wrong or old TWRP; or mismatched ROM vs. firmware, and the condition is probably recoverable.
If you know how, do fastboot getvar all, and post the results (delete IMEI and serial number before posting).

redpoint73 said:
Where did you get that version TWRP? I don't recognize the user/source chr0247
Describe the source location, or obfuscate the link with some extra character (as I see you don't have enough posts to post a link).
Which ROM did you try to install?
That TWRP version is a bit old. I just have a feeling you have used wrong or old TWRP; or mismatched ROM vs. firmware, and the condition is probably recoverable.
If you know how, do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
Click to expand...
Click to collapse
C:\Users\Karthik\AppData\Local\Android\Sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311691.15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.03.720.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA4A2Y900311
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) product: mels_tuhl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B90000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 4d1016cf
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.054s
help me out mate, please.

Pokémon_.rayquaza said:
help me out mate, please.
Click to expand...
Click to collapse
Help you out with what exactly? I assume you have the same/similar problem as the (old) thread title: not booting to OS. But it would be nice if you gave a description of how you got to this point, if you have TWRP (like the OP does) and unlocked bootloader or not. Getvar data is really useful, but usually not enough info by itself to describe the problem.
You have the M8eye. Not a lot of folks on this forum have that variant, and not a lot of resources for it. If you have unlocked bootloader and TWRP, you can try to restore one of the stock TWRP backups (has to be one for the "eye" specifically). Although the only one uploaded for your CID is 1.80.720.1. So I don't personally know if they higher version number backup will work or not.
---------- Post added at 01:51 PM ---------- Previous post was at 01:40 PM ----------
You can try the RUU posted on the following webpage (Post #10): http://forum.gsmdevelopers.com/showthread.php?t=34990&p=156198&viewfull=1#post156198
Can't personally vouch for this, and I don't normally like to link random websites outside xda. But one user at least appeared to have success with it.

It's the same one as the above guys

Pokémon_.rayquaza said:
It's the same one as the above guys
Click to expand...
Click to collapse
I asked for a detailed description of how you got to this point, plus if you have TWRP and unlocked bootloader. And you respond with a single sentence?
"I have the same problem" isn't an appropriate description of your issue, if you want proper help.
You have TWRP 2.8.0.3 and tried to install a ROM? Since that is what the "above guy" did. Unless your problem is exactly the same (and trust me, it never is!) you need to provide specific information.

Yeah, sorry. To be honest it's my cousin's phone and he gave it to me to fix. Yes, it has TWRP 2.8.0.3 and I don't think it has a ton installed in it, coz whenever I try to switch it on, it just shows HTC in the blank white screen and it's stuck like that until the battery dies. If I open it in recovery mode it takes me to some TWRP bootloader.

Pokémon_.rayquaza said:
Yeah, sorry. To be honest it's my cousin's phone and he gave it to me to fix.
Click to expand...
Click to collapse
Even so, I don't see why you can't ask your cousin what he did, tried to do, etc. It's in his interest if he wants the phone fixed, to give you the info.
Might be something as simple as flashing the right version SuperSU (botched root attempt).

Need help with My M8

hi
i installed leneage OS on my device few months back then used it few days then left it in my drawer , a few days back when i started my phone i saw a vertical colored lines on screen and i can barley see what came to my mind is that a software issue so what did i do is went to recovery did a full wipe (system as well) and that is my mistake , screen became worse in i cant see any thing except lines still im able to boot into bootloader , fastboot etc..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader)
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 6(s)
My Device status now is Unlocked TWRP recovery and No OS
thanks in advance

Cutrus said:
hi
i installed leneage OS on my device few months back then used it few days then left it in my drawer , a few days back when i started my phone i saw a vertical colored lines on screen and i can barley see what came to my mind is that a software issue so what did i do is went to recovery did a full wipe (system as well) and that is my mistake , screen became worse in i cant see any thing except lines still im able to boot into bootloader , fastboot etc..
My Device status now is Unlocked TWRP recovery and No OS
thanks in advance
Click to expand...
Click to collapse
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?

Saleen28 said:
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?
Click to expand...
Click to collapse
Yes they are , i reflashed the os at the beginning same results

Saleen28 said:
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?
Click to expand...
Click to collapse
uploaded a picture

Seems like hardware issue imo.
Your M8 is blue - have you changed the unibody or it was just a blue model?
Also - was your drawer a dry place? Maybe some moisture somehow got into it.

Saleen28 said:
Seems like hardware issue imo.
Your M8 is blue - have you changed the unibody or it was just a blue model?
Also - was your drawer a dry place? Maybe some moisture somehow got into it.
Click to expand...
Click to collapse
Yes blue , I've store it in his original box in a dry place

I'd flash a ruu as a last line of defense if it's a software thing.
If that doesn't help then it's a hardware problem, probably the screen. If you're lucky then reconnecting the screen ribbon might fix it, if not - you need a screen replacement.

Saleen28 said:
I'd flash a ruu as a last line of defense if it's a software thing.
If that doesn't help then it's a hardware problem, probably the screen. If you're lucky then reconnecting the screen ribbon might fix it, if not - you need a screen replacement.
Click to expand...
Click to collapse
Tried to flash a RUU halted at this message when i flash the RUU
fail43 main version check fail
Didn't figure out how to pass it

Cutrus said:
Tried to flash a RUU halted at this message when i flash the RUU
fail43 main version check fail
Didn't figure out how to pass it
Click to expand...
Click to collapse
This error tells that you're trying to flash a ruu that is lower than your current firmware. Try this one - https://androidfilehost.com/?fid=24369303960687057
Also a short guide I've found, just in case
ckpv5 said:
For S-On
fastboot oem lock (to relock bootloader)
fastboot reboot-bootloader (reboot to bootloader after relock)
fastboot oem rebootRUU (put the device in RUU mode)
htc_fastboot flash zip RUU.zip (to install RUU)
Click to expand...
Click to collapse