Hello forums,
I just got the hint I posted my question in the wrong forum. Here again the relevant information:
I pulled my note 2 out of my pocket and there was this "Samsung Galaxy Note II - N7105" logo showing. Since then I tried to reboot the phone but nothing helps.
Then I somewhere read something about "safe boot mode" (volume down + power). Since I tried this the screen gets completely scrambled black and white (like old television with no signal).
I tried several things since yesterday. I am able to get into download mode (vol down + home + power). With odin first I tried to flash the original rom.
The error is "There is no PIT partition". Then I tried to flash the cf-autoroot kernel - no success.
Then I tried to get a communication with the device by using adb console - no success. The device doesn't show up in connected devices list.
Since odin reports a missing (read: corrupted) PIT partition, I need the correct PIT-file for my official rom, right?
This is the ROM i've dl'ed from sammobile: N7105XXDMB2_N7105DTMDMA1_DTM
It _should_ be the version that actually was on my phone. Now I need the correct PIT file for that rom. Any idea where I can get that?
Leo
You can try the pitfile in this thread:
http://forum.xda-developers.com/showthread.php?p=37688128
it seems I don't have any luck. odin hangs at <ID:0/005> SetupConnection..
I think i'll save my time and get a replacement...
I don't want to be a pessimist but it looks like you have SDS (Sudden Death Syndrome)
I don't think that's too pesimistic - just realistic
Have requested an RMA
@edit i whrited the wrong model.....it I747 NOT 797
Again....excuse if i'm posting on the wrong place cause i'm really newbie on this forum things......
My problem is that while tring to reinstall my 4.3 droid i went to this thread http://forum.xda-developers.com/showthread.php?t=2498233 and tried using these files to get another rom, so as it mentioned i started flashing the boot loader but via odin i coudn't as odin negated to proceed due to errors. Them i triede odin multiloader them i tried TWRP them i ended up messing everythin tring via Clock work mod recovery. I just got the process well done and them when the system tries to boot it just won't boot. The eternal black screen looks like i have to a Hard Brick and even if while i try the usb cable the computer responds to the device, i couldn't take it to Download Mode.
After some research i have see that it's possible to make a debrick via SD card.
So.....i'm exactly........cring for help, any good soul that have a litle time to explain me a couple things if i can or i cannot debrick it without spending money. IS my time is running cause i got my SIM card cut and this is my only phone now.
Sorry again for anything.......hope somthing comes but while it not come i will keep researching thanks verybody.
@update Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file to the sd card
Farahjr said:
Again....excuse if i'm posting on the wrong place cause i'm really newbie on this forum things......
My problem is that while tring to reinstall my 4.3 droid i went to this thread http://forum.xda-developers.com/showthread.php?t=2498233 and tried using these files to get another rom, so as it mentioned i started flashing the boot loader but via odin i coudn't as odin negated to proceed due to errors. Them i triede odin multiloader them i tried TWRP them i ended up messing everythin tring via Clock work mod recovery. I just got the process well done and them when the system tries to boot it just won't boot. The eternal black screen looks like i have to a Hard Brick and even if while i try the usb cable the computer responds to the device, i couldn't take it to Download Mode.
After some research i have see that it's possible to make a debrick via SD card.
So.....i'm exactly........cring for help, any good soul that have a litle time to explain me a couple things if i can or i cannot debrick it without spending money. IS my time is running cause i got my SIM card cut and this is my only phone now.
Sorry again for anything.......hope somthing comes but while it not come i will keep researching thanks verybody.
Click to expand...
Click to collapse
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
edit: if that does not help use this link http://forum.xda-developers.com/showthread.php?t=2345860
get a usb jtag if you cant access download mode
doesnt work Mobiletechvideos.com is there to debrick your phone for a good price
winosxbuntu said:
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
Click to expand...
Click to collapse
1-Yes it's a AT&T i747 as i had my self upgrading downgrading upgrading again and rooteing the device the last time. I think that i possibly flashed something on these steps that gave me this problem after tring to flash the method on the link that i mentioned.
5- It's hard bricked cause i can't go into download mode. I'm reading this http://forum.xda-developers.com/showthread.php?p=43305728
I forgot to say....i'm not helpfull with the thecnical english language. I'm a braziliam and i really to only get the most simple threads that i can just in case to not comit any mistakes due to language issues.
My nightmares have come.......so i'm just installing a Virtual Machine fo Ubuntu and try to load the img to an 8gb SD series 4 i know that the recomended is 16 gb 10 series but i will try the process anyway just to get experience.
But still wanna help if anybody comes with more! thanks!
Farahjr said:
1-Yes it's a AT&T i747 as i had my self upgrading downgrading upgrading again and rooteing the device the last time. I think that i possibly flashed something on these steps that gave me this problem after tring to flash the method on the link that i mentioned.
5- It's hard bricked cause i can't go into download mode. I'm reading this http://forum.xda-developers.com/showthread.php?p=43305728
I forgot to say....i'm not helpfull with the thecnical english language. I'm a braziliam and i really to only get the most simple threads that i can just in case to not comit any mistakes due to language issues.
My nightmares have come.......so i'm just installing a Virtual Machine fo Ubuntu and try to load the img to an 8gb SD series 4 i know that the recomended is 16 gb 10 series but i will try the process anyway just to get experience.
But still wanna help if anybody comes with more! thanks!
Click to expand...
Click to collapse
cry a little, maybe the phone will accept your apologizes and resurrect from the dead
again it may not work so don't get your hopes up to high ITS A TRIAL AND ERROR situation WITH HARD BRICKS...........
some people have successfully debricked their device, so again you have to be patient and know exactly what you are doing and dont panic
Remember Mobiletechvideos.com can fix it in less than 25 minutes depending on your phone :laugh:and they are affordable :good:
Your pretty much stuck if you can't recover via SD card.
Remember there are a lot of options for JTAG repair, research local repairs by Kijiiji and also places like Mobile Tech Videos. Always search for legitimacy and best price.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
winosxbuntu said:
cry a little, maybe the phone will accept your apologizes and resurrect from the dead
again it may not work so don't get your hopes up to high ITS A TRIAL AND ERROR situation WITH HARD BRICKS...........
some people have successfully debricked their device, so again you have to be patient and know exactly what you are doing and dont panic
Remember Mobiletechvideos.com can fix it in less than 25 minutes depending on your phone :laugh:and they are affordable :good:
Click to expand...
Click to collapse
I'm almost crying. As a brazilian those devices are a litle difficult to access as i should need to import and the Dollar is expensive for me that's why i will try every way it's possible before tring someeone that have a box on brazil and pay for it.
Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file.
@update i have done with the burning img thing. It won't worked but i shall try again tomorrow with a 16GB serie 10 SD card!
Octopus
Farahjr said:
I'm almost crying. As a brazilian those devices are a litle difficult to access as i should need to import and the Dollar is expensive for me that's why i will try every way it's possible before tring someeone that have a box on brazil and pay for it.
Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file.
@update i have done with the burning img thing. It won't worked but i shall try again tomorrow with a 16GB serie 10 SD card!
Click to expand...
Click to collapse
I couldn't get a card with those parameters........
For my lucky......my company has purchased an octopus box that supports SGH-I747...i never used this before never saw never touched i'm just reading tutorials but a i couldn't find any tutorial about unbricking with the box. Any one know if it's possible to solve this easily via box???
Farahjr said:
I couldn't get a card with those parameters........
For my lucky......my company has purchased an octopus box that supports SGH-I747...i never used this before never saw never touched i'm just reading tutorials but a i couldn't find any tutorial about unbricking with the box. Any one know if it's possible to solve this easily via box???
Click to expand...
Click to collapse
Octopus box will not do this work in contact with the support so now i am waiting for the arive of the micro SD 16 GB class10. Will update the post when it arrives.
Farahjr said:
Octopus box will not do this work in contact with the support so now i am waiting for the arive of the micro SD 16 GB class10. Will update the post when it arrives.
Click to expand...
Click to collapse
Tried via sd but nothing happened.
Will try again with another image and charging the battery.
winosxbuntu said:
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
edit: if that does not help use this link http://forum.xda-developers.com/showthread.php?t=2345860
get a usb jtag if you cant access download mode
doesnt work Mobiletechvideos.com is there to debrick your phone for a good price
Click to expand...
Click to collapse
Is it 100% chance to get in to download mode via JIG????
I'm having trouble tring to refind the all the possible debrick images that I should try so i'm thinking about doing a JIG by my self. Any free solution i will try before spending any Money on something I don't know if will really work.
Farahjr said:
Is it 100% chance to get in to download mode via JIG????
I'm having trouble tring to refind the all the possible debrick images that I should try so i'm thinking about doing a JIG by my self. Any free solution i will try before spending any Money on something I don't know if will really work.
Click to expand...
Click to collapse
if its hard bricked then its a 50/50 chance, i would recommend trying to boot using the debrick.img on the SD-CARD and hope some magic will happen otherwise yu might have to spend some money to fix or just buy a new phone
Can’t access to Download Mode or Recovery Mode after bricking AT&T Galaxy S3 i744 4.3
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start
The installation seemed to go right, the program never showed anything weird.
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
I747
winosxbuntu said:
if its hard bricked then its a 50/50 chance, i would recommend trying to boot using the debrick.img on the SD-CARD and hope some magic will happen otherwise yu might have to spend some money to fix or just buy a new phone
Click to expand...
Click to collapse
It's been a while sorry about beinging away.
A guy who says that have a JTAG service tried and coudn't recover it. So I left it there because it have a broken display and a broken firmware and it' is from outside Brazil and after the FIFA CUP Anatel will lock operation of devices that models are not sold on Brazil and I747 is probably included on the list.
So i gave up from my phone and bought a Nexus 5.
The case is closed!
Maralex1520 said:
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 View attachment 2790321
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time View attachment 2790322 View attachment 2790323
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start View attachment 2790324
The installation seemed to go right, the program never showed anything weird. View attachment 2790325
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.View attachment 2790326
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Click to expand...
Click to collapse
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/showthread.php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Stuck in AT&T logo
Larry2999 said:
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/showthread.php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Click to expand...
Click to collapse
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Maralex1520 said:
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Click to expand...
Click to collapse
Okay. At least, we are almost there. Try booting into recovery mode and doing a hard wipe/reset. If this doesn't work, then you could try reinstalling the 4.3 stock firmware. You may need to reflash custom recovery as the initial flashing would have returned you to stock recovery. If you have to do the firmware flashing again, please make sure you clear your cache/dalvik before rebooting to system.
happy to see this thread resolved, this is what XDA is all about, no matter how fd up something sounds, a community like xda will find a fix for it even if it takes months
And the award of the Q/A thread goes to Larry and everyone in this post for trying and failing but succeeding at the end :laugh:
anywayz happy rooting and be careful, no-one wants to end with a brick cheers and keep this place awsome
Galaxy S3 i747 fixed after hardbrick
Larry2999 said:
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/show....php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2a....3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Click to expand...
Click to collapse
Hey Larry2999 I want to really thank you for your help it was so helpful, actually I discovered that the battery of the Galaxy S3 was failing thats why when I turned on the phone it turned off after a seconds althoughthe battery was charged, so I connected the charger to the phone and it started normally. Now I can use it and it has android 4.3.
Your method was right, and thanks to take the time to answer. I hope it can help someone else too.
Maralex1520 said:
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Click to expand...
Click to collapse
Hey I cannot get into download mode, and I´m exactly in the same problem you were. How did you get into download mode? I haven´t used usb JIG since I cannot get one from where i live.
I´ll be really thankful in you help me!:angel:
Maralex1520 said:
Hey Larry2999 I want to really thank you for your help it was so helpful, actually I discovered that the battery of the Galaxy S3 was failing thats why when I turned on the phone it turned off after a seconds althoughthe battery was charged, so I connected the charger to the phone and it started normally. Now I can use it and it has android 4.3.
Your method was right, and thanks to take the time to answer. I hope it can help someone else too.
Click to expand...
Click to collapse
Glad to know it's working fine now.
---------- Post added at 03:02 PM ---------- Previous post was at 03:01 PM ----------
feta9310 said:
Hey I cannot get into download mode, and I´m exactly in the same problem you were. How did you get into download mode? I haven´t used usb JIG since I cannot get one from where i live.
I´ll be really thankful in you help me!:angel:
Click to expand...
Click to collapse
Did you try getting into download mode with the 3-button combo (Volume Down/Power/Home)?