Hello,
I must send the phone to LG, cause the ON/Off Button don't work solid. So I wanted to flash the device back to the unrooted Standard Firmware. It is the LG P930/LG Optimus True HD for EU/Germany. Thanks for your help.
http://forum.xda-developers.com/showthread.php?t=1073827
Sent from my LG-P930 using xda app-developers app
Swetnes said:
http://forum.xda-developers.com/showthread.php?t=1073827
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Thanks but the software doesn't work ;( "cant connect to server"
Axtmus said:
Thanks but the software doesn't work ;( "cant connect to server"
Click to expand...
Click to collapse
You could try downloading the LG update too. Open the program, click on Help, select your country and language, switch to recovery mode, and flash.
audit13 said:
You could try downloading the LG update too. Open the program, click on Help, select your country and language, switch to recovery mode, and flash.
Click to expand...
Click to collapse
Yes, just click on help, then emergency.
Sent from my LG-P930 using xda app-developers app
---------- Post added at 04:49 PM ---------- Previous post was at 04:46 PM ----------
Axtmus said:
Thanks but the software doesn't work ;( "cant connect to server"
Click to expand...
Click to collapse
Did you see this :
"LaterEdit: For those with Unsuccessful in connection to server or the phone informations wrong error you NEED to input IMEI number with NO dashes NOT phone "serial number" (by Just_me)." At that thread.
Sent from my LG-P930 using xda app-developers app
Related
I got the root part down. Even CMW is installed. No Roms are taking installation is aborted. Any Ideas???
What ROMs? What version of CWM? (I hope it's a 6.x.y.z.) Any more error messages?
As I so often say, "Need input!"
smelenchuk said:
What ROMs? What version of CWM? (I hope it's a 6.x.y.z.) Any more error messages?
As I so often say, "Need input!"
Click to expand...
Click to collapse
Miui and asylum-cm10-d2att-build-03 Both from our site
WhiteReign said:
Miui and asylum-cm10-d2att-build-03 Both from our site
Click to expand...
Click to collapse
Install ROM manager in the play store and update your version of cwm recovery
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
Install ROM manager in the play store and update your version of cwm recovery
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I cant get in that. it only lets me go back to CWM 5.5.0.4 even if I get a rom to load
In what can't you get in?
Sent from my SGH-I747 using xda app-developers app
The rom installs but when reloading it takes me back to recovery.
Have you try downloading the recovery from cwm website and push it to your phone vie Odin?
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
Have you try downloading the recovery from cwm website and push it to your phone vie Odin?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
via Odin
WhiteReign said:
vie Odin
Click to expand...
Click to collapse
Via odin sorry
Sent from my SGH-I747 using xda app-developers app
---------- Post added at 01:45 AM ---------- Previous post was at 01:40 AM ----------
http://forum.xda-developers.com/showthread.php?t=1746680
Try the i747 toolkit easy to use and I sure it will fixe your issu
Sent from my SGH-I747 using xda app-developers app
im trying to root my sprint s3 i followed the steps for some reason when i try to load the odin file in the PDA slot its not loading as if the file dont exist need assistance thanks
Can you be more descriptive? Does it recognize the phone? Is it sticking at some point?
Sent from my SPH-L710 using xda premium
WindroidApps said:
Can you be more descriptive? Does it recognize the phone? Is it sticking at some point?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
ok im stuck at the part were is to i click on PDA grey box to load the cwm file for some reason my file wont load
biglion80 said:
ok im stuck at the part were is to i click on PDA grey box to load the cwm file for some reason my file wont load
Click to expand...
Click to collapse
oh i just notice u say did it recognize my phone i dont have my phone connect to usb from the video off this site it wasnt showing that the phone had to be connected
Lol simple enough. Glad I could help lol
Sent from my SPH-L710 using xda premium
WindroidApps said:
Lol simple enough. Glad I could help lol
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
im still stuck the cwm file doesnt say tar file or dose it have to save tar file or is the file is not good
One sec let me get you a link to the one I used
Sent from my SPH-L710 using xda premium
---------- Post added at 11:24 PM ---------- Previous post was at 11:22 PM ----------
http://forums.androidcentral.com/sp...e-updated-how-root-your-sprint-galaxy-s3.html that one's easy to follow with pics. And I recommend twrp
Sent from my SPH-L710 using xda premium
---------- Post added at 11:24 PM ---------- Previous post was at 11:24 PM ----------
Your phone is in download mode right?
Sent from my SPH-L710 using xda premium
biglion80 said:
im still stuck the cwm file doesnt say tar file or dose it have to save tar file or is the file is not good
Click to expand...
Click to collapse
ok i finally found the problem apparently the number 1 file didnt work or some i had to click on the number 2 file
Uhm, okay.. I don't quite know what you mean, but I take it you got it rooted?
Sent from my SPH-L710 using xda premium
WindroidApps said:
One sec let me get you a link to the one I used
Sent from my SPH-L710 using xda premium
---------- Post added at 11:24 PM ---------- Previous post was at 11:22 PM ----------
http://forums.androidcentral.com/sp...e-updated-how-root-your-sprint-galaxy-s3.html that one's easy to follow with pics. And I recommend twrp
Sent from my SPH-L710 using xda premium
---------- Post added at 11:24 PM ---------- Previous post was at 11:24 PM ----------
Your phone is in download mode right?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
ok do i need sd card to finish root i at the screen were it ask if i want to apply this or that
You're in recovery?
Sent from my SPH-L710 using xda premium
WindroidApps said:
You're in recovery?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
ok so did i need to use apply update from external storage or which one i choose
Did you let the device reboot after Odin? There shouldn't be a update from external zip....
Sent from my SPH-L710 using xda premium
WindroidApps said:
Did you let the device reboot after Odin? There shouldn't be a update from external zip....
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
after it pass odin i taken battery out and then next step i done was volume up hold buttons donw so that brought me to the reboot screen and ask i want to reboot or apply update fro adb or wipe date or fatory reset or apply update from cache so im not sure which one to choose
Okay, I'm not sure what you flashed with Odin. Download twrp and flash the recovery img in the past, with everything unchecked. Once you boot into recovery you have to flash the root file in the twrp root kit on that site.
Sent from my SPH-L710 using xda premium
WindroidApps said:
Okay, I'm not sure what you flashed with Odin. Download twrp and flash the recovery img in the past, with everything unchecked. Once you boot into recovery you have to flash the root file in the twrp root kit on that site.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
im at the android system recovery screen i just tryin to see which one i choose far as reboot phone or what
You're not understanding. I don't think you flashed cwm or twrp. Try reflashing in odin
Sent from my SPH-L710 using xda premium
WindroidApps said:
You're not understanding. I don't think you flashed cwm or twrp. Try reflashing in odin
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
ok i try it again i taken battery out and put battery back in after it pass so maybe i miss some i try it again
Make sure all the boxes are unchecked
Sent from my SPH-L710 using xda premium
WindroidApps said:
Make sure all the boxes are unchecked
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
ok from the video i was sayin leave the f
Dude, freegee bricked me. Im on mac osx and need help unbricking. I can get into download mode...but idk what to do after that. Please please help.
I have insurance via sprint, will they swap it out for me?
_dannyboy said:
Dude, freegee bricked me. Im on mac osx and need help unbricking. I can get into download mode...but idk what to do after that. Please please help.
Click to expand...
Click to collapse
same thing happened to me.
I flashed teenybin and it recovered me. here is a link to the thread.
http://forum.xda-developers.com/showthread.php?t=2230106
I used the same link in the post above plus this link below.
http://pastebin.com/Z2i7E1AN
Sent from my SCH-I605 using xda app-developers app
---------- Post added at 03:19 PM ---------- Previous post was at 03:13 PM ----------
Putting it in dowload mode is a little tricky. After drivers installed and software installed on PC, make sure phone is off! Had to hold volume key down at same time as power button and connect usb that is connected to computer. When phone boots to LG let go of power button only. Something like that.
Sent from my SCH-I605 using xda app-developers app
oneders65 said:
I used the same link in the post above plus this link below.
http://pastebin.com/Z2i7E1AN
Sent from my SCH-I605 using xda app-developers app
---------- Post added at 03:19 PM ---------- Previous post was at 03:13 PM ----------
Putting it in dowload mode is a little tricky. After drivers installed and software installed on PC, make sure phone is off! Had to hold volume key down at same time as power button and connect usb that is connected to computer. When phone boots to LG let go of power button only. Something like that.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
When I try go through the command prompt and it says its finished, nothing happens. The command window goes away. What do I do?
oneders65 said:
I used the same link in the post above plus this link below.
Click to expand...
Click to collapse
Trust me... remove this link. Its where it is for a reason.
Sent from my LG-LS970 using xda premium
In many forums bricked used when a device is completely unusable like not even going to recovery or download mode just dead.
sharkboy0901 said:
Shouldn't say bricked because bricked means its completely unusable like it won't even go to download, recovery, nothing dead.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I thought a softbrick was a bootloop but able to go into download and recovery...etc
_dannyboy said:
I thought a softbrick was a bootloop but able to go into download and recovery...etc
Click to expand...
Click to collapse
Yes that is correct, soft bricked means bootloop, etc but brick or hard brick means won't turn on at all. Just trying to be informative lol
Sent from my LG-LS970 using xda app-developers app
sharkboy0901 said:
Yes that is correct, soft bricked means bootloop, etc but brick or hard brick means won't turn on at all. Just trying to be informative lol
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Lol thanks
_dannyboy said:
When I try go through the command prompt and it says its finished, nothing happens. The command window goes away. What do I do?
Click to expand...
Click to collapse
are you using LGNPST to flash teenybin in download mode? if not got to teenybin thread scroll to bottom of additional info and click on click to show content box. this will give directions to download and set up LGNPST. Its been a while but I believe this is how I recovered.
Bdadd34 said:
are you using LGNPST to flash teenybin in download mode? if not got to teenybin thread scroll to bottom of additional info and click on click to show content box. this will give directions to download and set up LGNPST. Its been a while but I believe this is how I recovered.
Click to expand...
Click to collapse
I cant get passed thw lgnpst set up. When I performed the install prompt from the 'install.bat' file, it goes through the driver set up and stuff, it tells me to press any button the continue because its finished, yet nothing happened....
If I remember right I also had trouble with the bat file but I think you can manually move the files you need as the bat file just loads the DLL files. Wish I remembered more but its been a month or 2 since I did it. Also my laptop went down that has all the files I used. It will work if you keep at it..I got my old laptop to work with another charger so I'll try to find the files you need tonight when I get home from work.
Sent from my LG-LS970 using xda premium
Also if you have to move the ddl files make sure you use the command prompt and certify them.
Sent from my SCH-I605 using xda app-developers app
Deleted
So recently I bought a refurbished Galaxy Tab 3 for my son. He wanted to download some apps but whenever he clicked install it said "cannot download app (error 406)" and sometimes it would download the app but not be able to install it. I tried to clear the cache of the google play store app but It wouldn't let me because it was empty. I have also tried factory resetting the tablet but that didn't work. I can't return the tablet due to a no-return policy all help will be appreciated
Thanks,
John
Tab 3
Don't worry! Try reinstalling the firmware... Make sure hardware is good....
How do you reninstall the firmware?
Sent from my XT1080 using XDA Free mobile app
Just note the model number and Google it for its firmware reinstallation tutorials... You could even find in xda itself. Hit thanks if I helped you....
---------- Post added at 11:57 PM ---------- Previous post was at 11:51 PM ----------
droidusr2014 said:
How do you reninstall the firmware?
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
Install necessary drivers, download appropriate firmware version and just flash it... Simple!
Any good?
Kinda,
Instead of installing the firmware again i installed a custom rom (SEAL ROM) I ran into LOTS of bumps on the way (rom installation errors) but it finally worked out. Everything seems to be going smoothly.
Thanks
John
Sent from my XT1080 using XDA Free mobile app
droidusr2014 said:
Kinda,
Instead of installing the firmware again i installed a custom rom (SEAL ROM) I ran into LOTS of bumps on the way (rom installation errors) but it finally worked out. Everything seems to be going smoothly.
Thanks
John
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
I wouldn't do that if I were you! Samsung's stock ROM are really stable and good... Good to hear that everything is fine....
samsung kies
droidusr2014 said:
How do you reninstall the firmware?
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
download samsung kies software and it will install/reinstall the firmware for you.
Ihow do I fix error 406 on tab 3
NEED URGENT HELP. I tried to flash my phone with sp flash tool but failed. Now I'm unable to flash. Phone keeps disconnecting. My phone is not turning on.
Ok im here to help cuz i too had same problem
Sent from my LG-E988 using XDA Free mobile app
---------- Post added at 08:47 PM ---------- Previous post was at 08:46 PM ----------
But your phone should enter into fastboot lest i cant help
Sent from my LG-E988 using XDA Free mobile app
Drivers are properly installed?
sbacham said:
Ok im here to help cuz i too had same problem
Sent from my LG-E988 using XDA Free mobile app
---------- Post added at 08:47 PM ---------- Previous post was at 08:46 PM ----------
But your phone should enter into fastboot lest i cant help
Sent from my LG-E988 using XDA Free mobile app
Click to expand...
Click to collapse
Phone is not turning on & when I connect it to pc it keeps connecting & disconnecting.
SuperMan(Alex) said:
Drivers are properly installed?
Click to expand...
Click to collapse
I guess so. Though I'm using windows 8.1
My advice is charge for one hour (leave it plugged in)
Cuz some times low charging causes this
Sent from my LG-E988 using XDA Free mobile app
sbacham said:
My advice is charge for one hour (leave it plugged in)
Cuz some times low charging causes this
Sent from my LG-E988 using XDA Free mobile app
Click to expand...
Click to collapse
I tried to flash after removing battery
NEED HELP... Just got my phone back by selecting "download only" instead of "firmware upgrade". Is it fine? What is the difference between "Download" & "Firmware upgrade" method in SP Tool?
Yes it is fine.Download for kitkat
Upgrade for lollipop
Sent from my LG-E988 using XDA Free mobile app
sbacham said:
Yes it is fine.Download for kitkat
Upgrade for lollipop
Sent from my LG-E988 using XDA Free mobile app
Click to expand...
Click to collapse
What is the difference between "Download" & "Firmware upgrade"
Select download option
Sent from my LG-E988 using XDA Free mobile app
sbacham said:
Select download option
Sent from my LG-E988 using XDA Free mobile app
Click to expand...
Click to collapse
Bro. I want to know the difference.
arpanbag1996 said:
What is the difference between "Download" & "Firmware upgrade"
Click to expand...
Click to collapse
Download lets you flash specific partitions so u can deselect some components but you have to select and flash everything in Firmware upgrade
---------- Post added at 08:51 AM ---------- Previous post was at 08:46 AM ----------
My phone has the same problem when using sp flash tools any suggestions? (HTC 526g dual sim)