Related
Hello everyone,
I just got a MHL adapter and I'm trying to move some 4gb+ 720p mkv movie files so i can watch it in the big screen.
However, when i tried to move them on the sd card or internal storage, it says it can't do it.
Now the filesystem on the sd card is fat32 and i know there's some kind of limitation. What would you guys do? Maybe I can reformat the microsd card to another system like NTSF or EXFAT?
Thanks Guys
domwin said:
Hello everyone,
I just got a MHL adapter and I'm trying to move some 4gb+ 720p mkv movie files so i can watch it in the big screen.
However, when i tried to move them on the sd card or internal storage, it says it can't do it.
Now the filesystem on the sd card is fat32 and i know there's some kind of limitation. What would you guys do? Maybe I can reformat the microsd card to another system like NTSF or EXFAT?
Thanks Guys
Click to expand...
Click to collapse
yes, ntsf is going to be your best bet for gettin 4gb+ files on it, saw this same quandary over on the ASUS transformer prime forums. i heard exfat wasnt working, but that may just be on the tablet, idk. just passing along the knowledge!
You could always try formatting the card as either NTFS or exFAT, either one supports file sizes of 4gb+
Barring that, you might be able to make use of a DLNA app (AllShare maybe) to stream it over your network to your phone
AlokikolA said:
You could always try formatting the card as either NTFS or exFAT, either one supports file sizes of 4gb+
Click to expand...
Click to collapse
just did some quick googling and people say android won't recognize your sdcard once you format it as NTFS.
I think the only thing you can do is split the video into two parts and then play
Sent from my SPH-D710 using xda premium
Easy solution
domwin said:
Hello everyone,
I just got a MHL adapter and I'm trying to move some 4gb+ 720p mkv movie files so i can watch it in the big screen.
However, when i tried to move them on the sd card or internal storage, it says it can't do it.
Now the filesystem on the sd card is fat32 and i know there's some kind of limitation. What would you guys do? Maybe I can reformat the microsd card to another system like NTSF or EXFAT?
Thanks Guys
Click to expand...
Click to collapse
NTFS doesn't work, our device only recognizes fat32. The file size limit is approx 4.1 gb for the E4GT so I just take the .mkv file and reconvert it if it exceeds. Use AVS Video Converter or Freemake Video Converter. You won't notice the difference if you compress the file a little unless your bit rate is too low. Converting to .avi/divx/mp4 while keeping the bit rate around 3000kbps and min frame rate @23fps still looks amazing on our device, and most of the time you're still retaining a 720p image(depending on the tweeks). Hope this helps!
Doesn't seem to work. Over 2.5 GB'ish video files won't be able to play completely through. It will freeze after about the 10 minute mark or so into the video.
whatsitsnamenow said:
Doesn't seem to work. Over 2.5 GB'ish video files won't be able to play completely through. It will freeze after about the 10 minute mark or so into the video.
Click to expand...
Click to collapse
On stock video player? File possibly corrupt, did you convert the file yourself? I've had no problems playing avi/divx/mkv/mpeg...
patrick_1 said:
On stock video player? File possibly corrupt, did you convert the file yourself? I've had no problems playing avi/divx/mkv/mpeg...
Click to expand...
Click to collapse
On stock player, mx video player, and moboplayer. File is not corrupt as it will play through my WDTV media player. I have gotten files that are 2.2 GB to play all the way through but not those over 2.5 GB.
patrick_1 said:
NTFS doesn't work, our device only recognizes fat32. The file size limit is approx 4.1 gb for the E4GT so I just take the .mkv file and reconvert it if it exceeds. Use AVS Video Converter or Freemake Video Converter. You won't notice the difference if you compress the file a little unless your bit rate is too low. Converting to .avi/divx/mp4 while keeping the bit rate around 3000kbps and min frame rate @23fps still looks amazing on our device, and most of the time you're still retaining a 720p image(depending on the tweeks). Hope this helps!
Click to expand...
Click to collapse
I'm looking to watch the movies the HDTV not the phone.
Do you think converting the files will have the same quality when watching on the HDTV?
Sent from my SPH-D710 using Tapatalk
domwin said:
I'm looking to watch the movies the HDTV not the phone.
Do you think converting the files will have the same quality when watching on the HDTV?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Only if your resolution closely matches that of your tv. Too small of a res will make your set expand the picture.
whatsitsnamenow said:
On stock player, mx video player, and moboplayer. File is not corrupt as it will play through my WDTV media player. I have gotten files that are 2.2 GB to play all the way through but not those over 2.5
Have you tried different cables? (when transferring from computer to phone) The one shipped with our device should realistically be used for charging only, not good for data transfer.
Sent from this phone
Click to expand...
Click to collapse
I personally use multiavchd for everything blu-ray. its the best software i have used for hd content. i have 8 tb of blu-ray movies, so i have had experience. You can set file limit for when to split. I would set limit at 4.0 gigs so that once it hits it splits the file, then i can burn to 2 regular dvds instead of a dvd9.
I would like to play movies off of my USB Flash Drive but I've never done it on Android before and I don't exactly know what I need to accomplish this. Assuming I already have the flash drive, what else would I need? Also, do I need to download any special apps or can I just browse the contents of the flash drive using a File Explorer app?
Also, are all Flash Drives working or is there problems with certain ones?
jrwingate6 said:
I would like to play movies off of my USB Flash Drive but I've never done it on Android before and I don't exactly know what I need to accomplish this. Assuming I already have the flash drive, what else would I need? Also, do I need to download any special apps or can I just browse the contents of the flash drive using a File Explorer app?
Also, are all Flash Drives working or is there problems with certain ones?
Click to expand...
Click to collapse
get microUSB ota cable off ebay, its like 5 bucks or less
then download OTG cable helper app on playstore, mount ( need root )
also get any video players , mxplayer pro .apk , bsplayer, google it free if u want*wink* wink
If you so not want to root then you can use Nexus Media Importer from the play store. It cost about $4 dollars but is an option if you are not rooted. If rooted I have had good success with StickMount.
cobyman7035 said:
get microUSB ota cable off ebay, its like 5 bucks or less
then download OTG cable helper app on playstore, mount ( need root )
also get any video players , mxplayer pro .apk , bsplayer, google it free if u want*wink* wink
Click to expand...
Click to collapse
Can The micro USB port give the power to the USB flash memory in this new n7 '13 ?
So can i use the old otg cable of the nexus 7 and the same program ( nexus media importer?) to connect an external memory to the n7 '13 ?
* excuse me for my bad english!
santomarco said:
Can The micro USB port give the power to the USB flash memory in this new n7 '13 ?
So can i use the old otg cable of the nexus 7 and the same program ( nexus media importer?) to connect an external memory to the n7 '13 ?
* excuse me for my bad english!
Click to expand...
Click to collapse
u mean an otg cable thats a y splitter type? im not sure i don't that that cable setup
cobyman7035 said:
u mean an otg cable thats a y splitter type? im not sure i don't that that cable setup
Click to expand...
Click to collapse
No!
I have a otg ( standard) cable , but
I read on web that n7 13 has slim port , but it hasn't the pin ( +5v ? I don' t remember) for the power needed by flash drive to work ( with otg cable)
I want to know if I buy this n7 13 , can I use my flash drive + otg cable + nexus media importer to transfer file// play video file without transfer it on the tablet!
santomarco said:
No!
I have a otg ( standard) cable , but
I read on web that n7 13 has slim port , but it hasn't the pin ( +5v ? I don' t remember) for the power needed by flash drive to work ( with otg cable)
I want to know if I buy this n7 13 , can I use my flash drive + otg cable + nexus media importer to transfer file// play video file without transfer it on the tablet!
Click to expand...
Click to collapse
I actually just bought nexus media importer yesterday because my friend recommended it. I can confirm watching movies off my flash drive, connected to my otg cable, works. Mp4, and flv files has worked for me. I have 2 mkv files which I think are blu ray quality and only one plays smoothly, the other is super choppy.
I've also been able to transfer pictures as well. My s3 to flash drive, then flash drive to nexus 7. Vice versa.
MyanRagahis said:
I actually just bought nexus media importer yesterday because my friend recommended it. I can confirm watching movies off my flash drive, connected to my otg cable, works. Mp4, and flv files has worked for me. I have 2 mkv files which I think are blu ray quality and only one plays smoothly, the other is super choppy.
I've also been able to transfer pictures as well. My s3 to flash drive, then flash drive to nexus 7. Vice versa.
Click to expand...
Click to collapse
thank you!
MyanRagahis said:
I actually just bought nexus media importer yesterday because my friend recommended it. I can confirm watching movies off my flash drive, connected to my otg cable, works. Mp4, and flv files has worked for me. I have 2 mkv files which I think are blu ray quality and only one plays smoothly, the other is super choppy.
I've also been able to transfer pictures as well. My s3 to flash drive, then flash drive to nexus 7. Vice versa.
Click to expand...
Click to collapse
Hi:
Plus one here! I use Nexus Media Importer and Dice Player as well as VLC and can stream: mp4, flv, avi, wmv, Mpg, asf, mov.....
Make sure you enable write in advanced preferences. Write works with Fat32 and supports streaming, copying with NTFS. NMI does not support ex-fat.
I haven't been able to find a flash drive it wouldn't work with but smaller, in physical size, ones will put less stress on the cable. Make sure you have a reliable OTG cable.
I have a section on NMI in my guide here:
http://goo.gl/iaOek
Best,
Tom
Been using an OTG cable (that I actually bought for a B&N Nook Color) and Stickmount on a rooted N7. Works slick!
PJ Clifford said:
Been using an OTG cable (that I actually bought for a B&N Nook Color) and Stickmount on a rooted N7. Works slick!
Click to expand...
Click to collapse
Thanks!
Tomorrow I will buy the new n7 !
Does anyone know how to access nexus media importer location of usb drive, via file manager? Where is location located? Because when I am watching a movie, I want to enable subtitles for it. In MX Player, when I try to select subtitles, I am just directed to the internal sd card by default. But I cant select my subtitles because I cant find the folder where they are located. I tried "mnt" and almost all other folders aswell but there is no usb folder where my usb content is in.
Some movies have built in subtitles so I can just enable them (white cloud in the top right corner in mx player), but most of the time, I have to do it manually. When I am browsing in nexus media importer app, I can see subtitles there. But I cant copy them off to sd card. Seems like it is read only.
I also tried to rename subtitles to the same name as movie name, because this trick enables subtitles on older dvd players, but here, there is still no white cloud in mx player so I still have to enable them manually.
I am rooted and I tried stickmount app and a lot of similar ones aswell, but they dont work. They dont even show contant of the USB (but they do detect it).
Nexus media importer works flawlessly, and reads big 12gb with over 10 mb bit rate movie without any problems. It just works. Other apps, not so much.
I am using nexus 7 2013 and usb stick is A-Data S102 Pro Advanced 64GB formatted to NTFS.
Any help would be appreciated!
Thanks
edit: I think that "Nexus 7 (2013) Themes and Apps" would be more appropriated section so mods should move it. Sorry
neo5468 said:
Does anyone know how to access nexus media importer location of usb drive, via file manager? Where is location located? Because when I am watching a movie, I want to enable subtitles for it. In MX Player, when I try to select subtitles, I am just directed to the internal sd card by default. But I cant select my subtitles because I cant find the folder where they are located. I tried "mnt" and almost all other folders aswell but there is no usb folder where my usb content is in.
Some movies have built in subtitles so I can just enable them (white cloud in the top right corner in mx player), but most of the time, I have to do it manually. When I am browsing in nexus media importer app, I can see subtitles there. But I cant copy them off to sd card. Seems like it is read only.
I also tried to rename subtitles to the same name as movie name, because this trick enables subtitles on older dvd players, but here, there is still no white cloud in mx player so I still have to enable them manually.
I am rooted and I tried stickmount app and a lot of similar ones aswell, but they dont work. They dont even show contant of the USB (but they do detect it).
Nexus media importer works flawlessly, and reads big 12gb with over 10 mb bit rate movie without any problems. It just works. Other apps, not so much.
I am using nexus 7 2013 and usb stick is A-Data S102 Pro Advanced 64GB formatted to NTFS.
Any help would be appreciated!
Thanks
edit: I think that "Nexus 7 (2013) Themes and Apps" would be more appropriated section so mods should move it. Sorry
Click to expand...
Click to collapse
Nexus Media Importer is just an app that reads the contents of the USB Drive and forwards/streams the selected file to another app, which in your case is MX Player or saves/copies the selected file to internal storage. Nexus Media Importer works like a file server to MX Player. The contents of the USB drive is invisible to the Android ecosystem. On the other hand, Stickmount mounts the usb drive to a specific directory like /mnt/sdcard/usbStorage/sda1 and makes it available to the whole Android ecosystem.
To solve your problem, you can select the video file from Nexus Media Importer then tap the save button. Do this as well for the subtitle file. The copied files will then be located at the \mnt\sdcard directory. You can directly open it with MX Player and load the subtitle as long as they have the same filename.
A better alternative is to re-install Stickmount and then flash a custom kernel (search for elementalx) to enable NTFS Read/Write functionality.
If you don't want to install a custom kernel, your last option is to re-format the USB Drive to FAT32 and splitting you videos into 4GB files.
Hi:
FYI, Nexus Media Importer also supports NTFS, just not for the advanced write feature. NTFS works fine for streaming and can be easily manipulated on a pc.
Tom
Thanks I figured a way to download subtitles from USB to sd card and than add it to the movie.
Sorry if this has been answered before but I searched the forum and found very little info.
I just got my AFTV and sideloaded XBMC (signed-xbmc-13.1-FireTV(v6)) on to it. I have Audio Passthrough enabled so that my MKV files with AC-3 and DTS (not DTS HD) can go directly to my receiver. What I am noticing is that the Playback of these files (Over a wired Network both devices connected to a Gigabit switch) seem to be jittery or choppy (not so much that I can not watch them). I am coming from a WD Live TV and it never had this problem. I have tried playing the files via SMB and NFS shares and both seem to show the same results. The file sizes range from 400MB to up to 10GB. I have tried both Hardware Acceleration and Software. Is this a limitation of the AFTV (Which I don't want to believe because the WD Live TV has way lower specs) or is there a certain setup I have to do in the Settings to get it to play 100% Smooth?
jdawg0024 said:
Sorry if this has been answered before but I searched the forum and found very little info.
I just got my AFTV and sideloaded XBMC (signed-xbmc-13.1-FireTV(v6)) on to it. I have Audio Passthrough enabled so that my MKV files with AC-3 and DTS (not DTS HD) can go directly to my receiver. What I am noticing is that the Playback of these files (Over a wired Network both devices connected to a Gigabit switch) seem to be jittery or choppy (not so much that I can not watch them). I am coming from a WD Live TV and it never had this problem. I have tried playing the files via SMB and NFS shares and both seem to show the same results. The file sizes range from 400MB to up to 10GB. I have tried both Hardware Acceleration and Software. Is this a limitation of the AFTV (Which I don't want to believe because the WD Live TV has way lower specs) or is there a certain setup I have to do in the Settings to get it to play 100% Smooth?
Click to expand...
Click to collapse
I experience the same with my FireTV and the Ouya. It's really noticable when the Motion Interpolation settings is ACTIVE on my LEDTV.
With the Motion Interpolation desactivated, It's harder to notice, but it's there.
Glad to see that i'm not alone noticing this.
kalouka said:
I experience the same with my FireTV and the Ouya. It's really noticable when the Motion Interpolation settings is ACTIVE on my LEDTV.
With the Motion Interpolation desactivated, It's harder to notice, but it's there.
Glad to see that i'm not alone noticing this.
Click to expand...
Click to collapse
So I am guessing it's a limitation of XBMC? Movies off of Amazon Prime play flawlessly, but I assume those aren't MKV's. I really like the box but this is a deal breaker for me. I have a huge collection of BluRay Rips in MKV format. I guess it's back to the WD Live TV.
Sent from my Nexus 5 using XDA Free mobile app
I got flawless playback of non-DTS MKV on the Sony NSZ-GS7 I once had until replacing it with Fire TV because it got corrupted somehow.
I think Fire TV is missing proper support for a lot of essential formats.
jdawg0024 said:
Sorry if this has been answered before but I searched the forum and found very little info.
I just got my AFTV and sideloaded XBMC (signed-xbmc-13.1-FireTV(v6)) on to it. I have Audio Passthrough enabled so that my MKV files with AC-3 and DTS (not DTS HD) can go directly to my receiver. What I am noticing is that the Playback of these files (Over a wired Network both devices connected to a Gigabit switch) seem to be jittery or choppy (not so much that I can not watch them). I am coming from a WD Live TV and it never had this problem. I have tried playing the files via SMB and NFS shares and both seem to show the same results. The file sizes range from 400MB to up to 10GB. I have tried both Hardware Acceleration and Software. Is this a limitation of the AFTV (Which I don't want to believe because the WD Live TV has way lower specs) or is there a certain setup I have to do in the Settings to get it to play 100% Smooth?
Click to expand...
Click to collapse
I had that problem on one file, I demuxed and remuxed using MKVToolnix and it played flawlessly after
I using this http://forum.xda-developers.com/showthread.php?t=2790392 XBMC
jdawg0024 said:
So I am guessing it's a limitation of XBMC? Movies off of Amazon Prime play flawlessly, but I assume those aren't MKV's. I really like the box but this is a deal breaker for me. I have a huge collection of BluRay Rips in MKV format. I guess it's back to the WD Live TV.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Just to be clear, the hiccup I talk about is hard to see for a common human eye (my girlfriend doesn't notice at all). The movie plays really well,
But for a 24p on 24hz refreshrate fan, the tinny hiccup is noticable. jdawng0024, do we talk about the same thing ?
kalouka said:
Just to be clear, the hiccup I talk about is hard to see for a common human eye (my girlfriend doesn't notice at all). The movie plays really well,
But for a 24p on 24hz refreshrate fan, the tinny hiccup is noticable. jdawng0024, do we talk about the same thing ?
Click to expand...
Click to collapse
Mine is noticeable to everyone who sees it. The file plays but is Jerky. Coming from a WD Live TV the Amazon Box Plays worse. I have been reading the forums for a couple of days now and I might install an older version of XBMC. All of my files are mkv with DTS or AC-3 audio and they are all 1080p.
Sent from my Nexus 5 using XDA Free mobile app
jdawg0024 said:
Mine is noticeable to everyone who sees it. The file plays but is Jerky. Coming from a WD Live TV the Amazon Box Plays worse. I have been reading the forums for a couple of days now and I might install an older version of XBMC. All of my files are mkv with DTS or AC-3 audio and they are all 1080p.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Might be a ''noob' question but, are you able to see your rendering stats with ''O' on the keyboard' or with your remote (keymap no.3). Is it really dc:stf-h264 that you see or dc:ff-h264 ??
I say that because I found a bug that, if I play a bunch of music video for example with party mode or not, after a while, maybe 15 or 25 clips. XBMC cannot decode the video with hardware decoding anymore. Even if libstagefright is selected in acceleration settings, the renderer clearly displays dc:ff-h264 for all my h264 video. Because of that, all videos stutters/jitters/frame drop.The only workaround I found is to reboot the FireTV with Home+Play for 5 seconds. And everythings is find until it happens again.
kalouka said:
Might be a ''noob' question but, are you able to see your rendering stats with ''O' on the keyboard' or with your remote (keymap no.3). Is it really dc:stf-h264 that you see or dc:ff-h264 ??
I say that because I found a bug that, if I play a bunch of music video for example with party mode or not, after a while, maybe 15 or 25 clips. XBMC cannot decode the video with hardware decoding anymore. Even if libstagefright is selected in acceleration settings, the renderer clearly displays dc:ff-h264 for all my h264 video. Because of that, all videos stutters/jitters/frame drop.The only workaround I found is to reboot the FireTV with Home+Play for 5 seconds. And everythings is find until it happens again.
Click to expand...
Click to collapse
ive also experienced issues with xbmc properly selecting libstagefright. it happened when i was screwing around with both mediacodec and libstagefright enabled. the fix for me was to disable all acceleration, reboot the unit, enable libstagefright, reboot again, good to go ever since.
Ok think I got it a lot better. I restarted from Scratch. Every once in a while I will see it but it isn't nearly as bad. going to try to load the avancedsettings.xml and see if that smooths it out even further.
You are at a stalemate with XBMC since an OTA update reportedly fixed jittery 1080P playback AFAIK.
I found some speed enhancements throughout the weeks,but I never got around to posting them all.
Terribly sorry about forgetting to make that speed enhancement thread to those that want it,I have just been out of it lately.
retroben said:
You are at a stalemate with XBMC since an OTA update reportedly fixed jittery 1080P playback AFAIK.
I found some speed enhancements throughout the weeks,but I never got around to posting them all.
Terribly sorry about forgetting to make that speed enhancement thread to those that want it,I have just been out of it lately.
Click to expand...
Click to collapse
Could you give more details on this OTA update?
Ended up going back to my WD Live TV. MKV playback blows the amazon fireTV out of the water. I will continue to follow its progress and hopefully it gets better. I will buy it again once things get ironed out.
Sent from my Nexus 5 using XDA Free mobile app
jdawg0024 said:
Could you give more details on this OTA update?
Ended up going back to my WD Live TV. MKV playback blows the amazon fireTV out of the water. I will continue to follow its progress and hopefully it gets better. I will buy it again once things get ironed out.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Hey, just wondering if this ever got resolved. I'm also a WDTV Live user, and I was thinking about "upgrading" to a FireTV with its much snappier interface, more apps, etc. But almost ALL of my movies and TV are h264 mkvs with either DTS or AC3 sound (and some AAC/mp4s mixed in there as well).
Can the FireTV play those kinds of files flawlessly from a SMB or NFS share? It's been months since this thread was active, so I wanted to see if this is a "solved" issue nowadays. Thanks!
lannister80 said:
Hey, just wondering if this ever got resolved. I'm also a WDTV Live user, and I was thinking about "upgrading" to a FireTV with its much snappier interface, more apps, etc. But almost ALL of my movies and TV are h264 mkvs with either DTS or AC3 sound (and some AAC/mp4s mixed in there as well).
Can the FireTV play those kinds of files flawlessly from a SMB or NFS share? It's been months since this thread was active, so I wanted to see if this is a "solved" issue nowadays. Thanks!
Click to expand...
Click to collapse
flawlessly dude.. the OP was one of the few experiencing issues, i have a huge library of files on my SMB share and they all stream and play flawlessly.
nhumber said:
flawlessly dude.. the OP was one of the few experiencing issues, i have a huge library of files on my SMB share and they all stream and play flawlessly.
Click to expand...
Click to collapse
So just sideload XBMC (any particular version/build/etc?) and you're off to the races? No rooting, no flashing, etc?
Plays mkvs containing h264 or MPEG4, DTS or AC3, old xvid avis, etc? Will it play subtitles that aren't muxed into the mkvs (like in an srt file named the same as the mkv)?
I am also experiencing judder when playing 1080p H.264 (AC3 audio) MKV files with the fire TV.
I’ve tried XBMC and MXPlayer. I am seeing judder and frame drops with my AFTV, but can’t figure out why or how to tweak it. The same files play smoothly on my Galaxy S4 and Nexus 7 using MX Player.
Any thoughts?
lannister80 said:
So just sideload XBMC (any particular version/build/etc?) and you're off to the races? No rooting, no flashing, etc?
Plays mkvs containing h264 or MPEG4, DTS or AC3, old xvid avis, etc? Will it play subtitles that aren't muxed into the mkvs (like in an srt file named the same as the mkv)?
Click to expand...
Click to collapse
im rooted but it doesnt matter for XBMC, im running gotham 13.2 , DTS DD and AC3 all work great via HDMI and optical, i would assume it will auto use a local srt file but for sure you can point it to it.. xbmc will scrape the net for any subtitles for every movie i've encountered, so it shouldnt be an issue for you. the XBMC wiki has a good section with everything you need to know about xbmc and the FTV, there are a few device specific settings you need to make and your off to the races.
Has anyone who was experiencing the DTS MKV video judder audo sync issues resolved them? I just picked up two AFTV's and can not get my DTS MKV's to work.
connection
I got AFTV a month ago and did not have an issue streaming MKV videos from my synology nas via WiFi 5GHz. after a few days i started to notice video judder and i switch from WiFi to plug in Ethernet and it made it worse. it appears that AFTV connects better with WiFi from streaming shows/movies compare to plug in Ethernet. is there specific settings i need to adjust for the Ethernet plug to work better?
speedracerx0509 said:
Has anyone who was experiencing the DTS MKV video judder audo sync issues resolved them? I just picked up two AFTV's and can not get my DTS MKV's to work.
Click to expand...
Click to collapse
mine all work fine, you have libstagefright enabled and media codec disabled right?
The only app on my Fire TV Cube gen2 that can output a 5.1 bitstream is Amazon Video. With any other player, it will downmix a 5.1 audio track to 2.0 stereo. My soundbar will always indicate 2.0 Dolby Digital, except when I stream Amazon content, then I get 5.1 DD. So the hardware setup works.
Does anyone know of any player app that will put out 5.1 DD over HDMI when the content provides it? Tried VLC and MXPlayer, and they won't do it.
KODI.
Make sure in system audio (trust me):
Setting level expert
Number of channels 2 (yes two, allows passthrough to work)
Output config best match (I dont think this one matters)
Allow passthrough on
DD AC3 capable yes
Transcoding yes
Then DTS and EAC3 as it is.
These are proper Kodi settings for passthrough digital HDMI, Optical, Composite whatever
Thanks, that worked!
np happy to help