Develop Bugs

My Samsung Note 2 is...BRICKED? Don't start (Galaxy Note 2 Brikkato, Non Parte !)

Hiii!!!
My Name is Adonis and i'm Italian Boy ^_^ Best fan for The GREAT JOB of This Site! i Vey Vey Love XDA! *_*
Mhhhh...but I try to ask your help..... :good: Pleasssseeeeee
I have the Some Problem with My NEW Samsung Galaxy Note 2....................
I recently installed a Root Permissions on Original Firmware, and I then installed a Custom Rom (I am Italian so I chose an Italian ROM COOKED ^ _ ^) of cis80. Up to yesterday's .. All okay!
For a Stroke, unfortunately, the phone started to reboot without any reason, and the last time it was restarted .. in a like Boot Loop... O_O The Phone Locked on screen "Samsung Galaxy Note 2 N7100" Without going on Next Logo of Loading (As Default What Samsung).
I've tried EVERYTHING .. but really .. I say to ALL! But nothing to do ..... What is the only one that I can to enter into "Download Mode" .. with Odin I've tried everything but everything I always returns "FAIL" or "Error Pit" & more .... or another Error. Also NAND Erase, nothing nothing... :_(
AIUTOOOOO!! I do not know Do! I have the Note 2 to 10 days c.a. ... and now I can't use it ..... My Beast is Down...

First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya

Kashamalaga said:
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Click to expand...
Click to collapse
Ok Thanks.
But i Try....and i don't have any solution.
i tried load a Stock ROM with ODIN....but i have a Error....Because i have a "Error with a Table Partition"... "Error with Pit File"....i try load a Pit file, but not load anything.... can i do?

This is un example of report of ODIN:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXALIH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100OXXALJ1_BTU_CSC_factory.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
Click to expand...
Click to collapse

Adonis4U said:
This is un example of report of ODIN:
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
Click to expand...
Click to collapse
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium

szymi22 said:
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...

Adonis4U said:
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Click to expand...
Click to collapse
Try 1.85 odin and if that wont help try to download non italian rom, uk one works for me before when i fixed my friend note 2
Sent from my GT-N7100 using xda premium

You try
1. download Stock ROM file
2. Use Odin 3.07 (recommend)
3. Open Odin (on computer use normal harddisk. Not solid stat drive,SSD) check Auto Reboot and F. rest Time and Nand Erase All OR Repartition (If you have PIT file)
4. Check PDA and select Stock ROM (your downloaded)
5. Start
6. Finished Flash Rom. You Remove USB and restart Your phone will stop at samsung logo. Never mine. You restart again (Hold power button). Enter stock recovery mode (Vol Up + Home + power button).Your Phone show error can't read data.
7. In stock recovery menu. You check wipe cache. and wipe cache+factory reset. and restart your phone.
8. Your phone may come back normal.
good luck.

[Q] My note II won't boot

Hi Every body:
That is really a bad day, just woke up this morning to find my device (was plugged for charging over night) to find it stuck at (GALAXY NOTE II N-7100)
tried several times to pull the battery and put it back hopefully to get it boot...but nothing happened.
I can access only the download mood and NO access to the custom recovery!!
I was running Android 4.1.1 WITH ROOT!
As advised in many other posts, tried to update to 4.1.2 using odin but the whole process failed with the following log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas and suggestions will be really appreciated.
Samsung maintenance in my place may take forever to get it fixed (almost 2 weeks!!)

Use odin 1.85 , check samsung usb drivers installed , exit kies, disable antivirus and firewall and try..

"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...

Primokorn said:
"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...
Click to expand...
Click to collapse
Thanks for the reply, really appreciate it..
I changed the USB port and got the following log from odin:
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?

drsayed_958 said:
Any ideas?
Click to expand...
Click to collapse
Did u try another Odin version? 1.85 or 3.04

Primokorn said:
Did u try another Odin version? 1.85 or 3.04
Click to expand...
Click to collapse
Tried both, got the same result.:crying:

You can flash with pit in Odin, it should work. The pit file can be found around here somewhere, can't find it for you right now.
Sent from my GT-N7100 using Tapatalk 2

http://forum.xda-developers.com/showpost.php?p=32273406
Not sure that it solves your issue.

same problem can anyone help ? no pit partition , or Can't open the serial(COM) port. , all drivers are installed i installed kies for driver the uninstalled without drivers

[Q] Return to Stock Rom 4.3 After CyanogenMod

im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.

camerondobbs said:
im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.
Click to expand...
Click to collapse
Unfortunately my friend, Odin will not work to return back to stock. By chance did you make a nandroid backup before you switched from 4.3 to CyanogenMod? If not I'd suggest finding a TW based rom from one of the devs on here under the Android Development thread and flash it manually via CWM or TWRP. I'm looking myself for a 4.3 TW Odin tar but nothing has surfaced to my knowledge. You're trying to flash a 4.0 rom in Odin it looks like which won't work since 4.3 updates the baseband and bootloader which will cause Odin to fail every time you try flashing a rom that isn't 4.3

camerondobbs said:
im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.
Click to expand...
Click to collapse
if you still can go into downloadmode, you can unroot your device and put it back to stock with Kies 3.
Download Kies 3 from samsung web site and download Samsung USB Drivers too
Unplug your phone from the PC
After on Kies 3 click on tools>emergency firmware update and inisialitazion.
Now they will ask for your phone model so if you are on at&t its : SGH-I747 (Rogers bell .. tis : SGH-I747M
After, Kies 3 will ask you your S/N (this can be found under your battery the sticker) so remove your battery and write it down
Know if it work they gonna tell you to put your phone into download mode
To go into download mode hold : Volume Down + Home Button + Power button
After on your phone you should see a Yellow triangle with some warning (jUst ignore that and press the volume up button)
And Kies 3 will automaticly unroot your phone, flash the new 4.3 update and flash the new bootloader too.
!!!***WATCH OUT! DO A BACK UP OF YOUR INTERNAL MEMORY BECAUSE YOU ARE GOING TO LOSE EVERYTHING***!!!
And after you just have to wait.... Kies 3 will download automaticly 4.3 Firmware and flash it on your phone.
Make shure that your battery is charged at least at 30% before doing that.
And after enjoy your phone unrooted and on stock rom and after you will be still able to update your phone for futurer update availble.
Tell me if it worked for you after!

Samsung Galaxy S4 Mini GT-I9195

So, my friend updated their S4 Mini GT-I9195 to Android version 4.4.2 Kitkat. The phone shut down twice after the update and is no longer able to boot up. So they gave me it to see what I can do. I've tried going to Odin mode, Recovery. But none of it works. I've also tried using QPST, but I'm unable to find .hex or .mbn file for it. So I tried the one for the required MSM8930 chipset. Sadly, the QPST cannot connect to my phone. Is there anything else I could do to revive it without having to JTAG it or something? Please help.
EDIT: I've managed to run it in Odin mode by using debrick.img flash into SD Card, however.. after trying to flash recovery. Odin returns:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1100)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Any ideas?

PIT file needed for GT-N5120 16GB

Hi there,
I'm trying to flash a stock UK firmware (N5120XXDOD1_N5120BTUDOD1_N5120XXDNH3_HOME.tar.md5) for my GT-N5120 LTE 16GB with Odin, but I'm having problems getting it to work. Odin Log reports two different problems:
[1]
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1205)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
[2]
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1205)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I've spent hours trawling the net for a suitable Pit file, but I can't find one. I understand that you can make your own using something like Pit Magic, but I don't know what I'm doing with it.
A little background on the problem with my Note 8. Yesterday the tablet was plugged into the charger and switched on but wasn't in use. I noticed it reboot for no reason but then it wouldn't load any further than the logo / model number screen. I rebooted it, pulled the battery and tried just about everything else to get it to work. Finally I resorted to trying to restore the firmware via Kies. The process started but failed. Now I have no firmware and I can only get as far as the Download screen.
Additionally, the screen flickers constantly and sometimes only has flickering black and white lines. I suspect that something more serious is wrong with it, but I'd still like to see if I can fix it before I trash it.
Could anyone point me to a suitable Pit file or could extract one from their GT-N5120?
Appreciate any help, thanks.

BUMP
Still looking for a PIT file for my GT-N5120 16GB. I must have PIT files for nearly every Samsung model to date, all except a 16GB version for this device.. I've got an 8GB version that won't flash. I've probably got every version of Odin released in the wild.
I've got Samsung Full Firmware Maker, PIT Magic, PIT Viewer, various recoveries and stock firmwares.. most of which are a bit over my head at this time. All I need is one little file.
I can still boot into Download Mode, I've made a 300k ohm USB jig so I can boot into Factory Mode, but I still can't flash firmware as repartition fails on every PIT I've tried. The only thing I haven't tried is a 16GB PIT file, and if that fails, I'm left with a few other unbrick options before I concede to the fact that it's dead and has a NAND failure.
Anyone willing and able to extract a 16GB PIT file from their GT-N5120 16GB?
Cheers, Chris.

I have a N5110 16gb, so I likely cannot help. But how would one extract a PIT file, because that might be useful to have, because I was afraid I'd mess mine up flashing ROMs for N5100, but it seemed to be fine, I was able to odin 5110 stock without issue.