Hi mates,
My friend got a new lumia 900. I helped to update the phone via zune however the process failed. What's worse, the phone won't turn on anymore. When I powered on the phone, a white screen showed shortly. I tried various way to recover yet all unsuccessful:
1, hard reset: the phone enter recovery screen which is a phone connecting to a laptop, however there is no progress bar. The screen remain still no matter how long I waited.
2, firmware recovery via nokia care suit: the recovery process couldn't start because the phone can't be detected. In fact, when the volumn+power are pressed, white screen showed twice.
does anyone has a clue, I can really use some help. Thank you a million.
Hi mate, have you try to run refurbish with your RM ? hope it work !
Related
I accidentally got disconnected with my phone during an update...
and now the phone is stuck in the black "connect screen". I cant get out of it at all, i tried resetting the phone, reinserting the battery, reconnecting to pc, everything showed nothin.... but the black connect screen!!!!!
><
PLEASE NEED HELP ON WHAT TO DO!!!!!!
I have a HTC 7 Mozart, updated to Nodo, got stuck during the update to Mango beta2 7712
ANY INFORMATION WOULD BE APPRECIATED!!!
2 ?'s
1) Is there ROM's for your device?
2) If so, have you tried;
a) Pull your battery (USB disconnected)
b) Insert battery
c) Hold volume down & power on (Keep holding volume down till you see Tri-Color Screen)
d) Connect USB to PC
e) Flash ROM for your device
NOTE: Don't use a custom ROM, use a stock ROM. Don't think custom ROM's can get updates.
toothfish said:
I accidentally got disconnected with my phone during an update...
and now the phone is stuck in the black "connect screen". I cant get out of it at all, i tried resetting the phone, reinserting the battery, reconnecting to pc, everything showed nothin.... but the black connect screen!!!!!
><
PLEASE NEED HELP ON WHAT TO DO!!!!!!
I have a HTC 7 Mozart, updated to Nodo, got stuck during the update to Mango beta2 7712
ANY INFORMATION WOULD BE APPRECIATED!!!
Click to expand...
Click to collapse
Can you get into SPL mode? (the one with the colors)
http://t0.gstatic.com/images?q=tbn:ANd9GcTYjcZbbqtXqHN-vQnS4M1K1aFNaOKDwFudZiZnA_akRWAYRhR5
Try pressing Vol-Down+Power as the same time - it should come up immediately.
If it does (it really should), flash your stock ROM to get back to the start.
After that, i suggest using the DFT's method of upgrade - replace the SPL with HSPL (or RSPL) and flash a custom rom.
Ofir.
sorry...i made a mistake.please delete this entry.thanks
Thank you very much for the tips, I'll try it out
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Basically, this: http://forum.xda-developers.com/showthread.php?t=1384415
No one responded to that thread because it was in the wrong forum.
I got the "Phone -- ! -- PC" screen, and was attempting to fix it before getting this black screen of death.
Galaxy Nexus GSM
Rooted, Codename ROM, don't think there is a Kernel in there
Carrier: Virgin Mobile
Edit: I won't be able to respond for a couple hours as I'm going to work. Any and all help is much appreciated.
Original post from above thread below:
Hello guys,
I have recently bought my first android phone, the Samsung Galaxy Nexus.
On the second day I decided to root it since I needed market enabler, as my local market (UAE) has literally no apps.
I rooted using the SDK tools, fastboot and superboot. Everything worked fine for 1 day.
However, the next day, the phone just died on me, and would not boot at all. It kept getting stuck on the "Google" image at startup. At that point, I could still go into the bootloader. I tried locking/unlocking the bootloader again, since that basically wipes all the date on the phone, but it still refused to load, it would get stuck at the startup animation.
After a few more attempts, it kept spam restarting every time I tried to switch it on.
At that point, I was downloading the default OEM ROM so I could reflash that onto the phone. However, I thought I could try using the superboot bat file again, and maybe that would fix the problem. BIG MISTAKE.
As soon as I ran that file, the phone COMPLETELY died. It will not start at ALL, it will not go into Bootloader, not go into Recovery mode, and not even go into Download (odin) mode.
The ONLY possible response you can get from it, is when you plug it into the PC. My PC seems to play that "detection" sound, same sound as when you plug in a USB, but it would just play that sound over and over again, as if im plugging/unplugging a device really quickly. It seems like the phone is continously restarting itself. When I connect the phone to the PC and that disconnect/reconnect sound comes up, I went into my device manager and I could see the following:
An item under "Other Devices" called "OMAP4440" keeps appearing and dissapearing all the time, with the little "!" mark next to it indicating that there is a driver error. The drivers for this phone are fully installed on this same PC, and it use to work fine before it went dead.
Now the problem is since I cant get into any mode whatsoever, its a bit hard to diagnose the phone. I know there is a "recovery" slot at the bottom of the phone that is accessible with a small pin, but I dont for the life of me know how that works or what it does. Does anybody know how to work that or what it actually does?
Any help would be appreciated! Thanks fellas.
Click to expand...
Click to collapse
What i with my little (almost nothing experience in android) would do its going to another computer with no drivers installed, would download the toolkit and install those drivers, then plug the phone and see what happen, im sure its not bricked since the computer recognice it.. I did lot of stuff with blackberry and there was a lot of ways to recover a phone like that... From here if the toolkit recognice it in any way.. Then you could try to do some of those steps.. As far as i tried doing all kind of stuff to my phone, toolkit its for much the Best Tool and way to do anything to your phone or at least for starters like me
Sent from my Galaxy Nexus using xda premium
But the computer doesn't actually recognize it. The "detection" sound it makes is for an unresponsive device. It won't charge, won't be recognized, and no matter what combo I use, it doesn't turn it.
I played dumb, called Samsung, and now I'm going to send it in. Thanks for the help though.
sometimes my screen goes blank and I have to pull the battery and everything comes back to normal
Hi All,
First of all I'm not a native english speaker and I'm a noob in this stuff o rom's .
I recently bought a phone and on update it to JB 4.1.1 with Sense 4+ . Everything went ok and the phone apparently was working ok.
The next day I just noticed that the bluetooth was not 100% because I had some cuts in the sound when connected to a bluetooth headset. Because of this I looked for another OTA update and it found one that said somethink like "General System Improvement" or something like that.
I've installed it but this update didn't went till the end since I get stucked on the "red sign" indicating some fail. I try to reboot the phone but apparently he was dead.
After a lots of tries and key combinations I was able to enter the boot mode and choose to restore to factory mode, but apparently it was not successful. Then I tried and option to check for CRC of img files I think (not sure because don't remeber). It check for 3 images files showing the CRC code, then I think the phone get stucked on one because I still have the waiting message but nothing else happens.
I pressed power button again trying to reboot the phone but since then then phone died completly. The only sign of life is when I connect to the PC windows emits the sound of detecting something but gives an error related to the drives.
Sometimes I get a message saying that a ARX device was found but not anymore.
Tried almost everything that I could read on this forum but nothing seems to work...I think the phone is looping on the boot or doesn't have any battery...not sure.
I've tried some RRU but they fail to find the phone saying not connected or not detected.
Any help will be greatly appreciated, Thanks
Johny
Sent it back for warranty repair as soon as you can this is a known fault as it happened to me recently.
Similar problems: http://forum.xda-developers.com/showthread.php?t=2075862
Getting out of APX mode
Your bootloader isn't locked right? Or were you ever rooted? If the answer is no, just send it to HTC and your warranty will do the rest.
Sent from my HTC One X using xda app-developers app
Hello everyone.
My HTC One M8 showed a message that says UI.System is not responding then shut down. When I try to open it it is stuck on the welcome HTC white screen.
- I tried to hard reset it from the hard reset it but when I do so it shows black screen with green progress arrow and then it goes again to the Welcome Screen.
- I tired recovery menu but it shows the red triangle on the phone then again to Welcome Screen.
- When I connect the phone to the PC the HTC Sync Manager doesn't recognize it in this state.
- The only case when HTC Sync Manager recognizes it is when I go to the hard rest menu and choose Fastboot.
- I downloaded HTC RUU for international phones from the official USA website (I bought the phone unlocked from Egypt) and it started working for few seconds then it prompt error 130.
As you would get, I'm not a very technical guy but I'm welling to do anything to get my device working. I currently use iPhone 5 as a backup phone, and what a horrible device.
Please help me out as I'm now in Germany and so far I could not find a store to help me get my phone back. Send me step by step links or videos and I will follow the procedures.
Thanks a lot for your help.
LostMan1991 said:
Hello everyone.
My HTC One M8 showed a message that says UI.System is not responding then shut down. When I try to open it it is stuck on the welcome HTC white screen.
- I tried to hard reset it from the hard reset it but when I do so it shows black screen with green progress arrow and then it goes again to the Welcome Screen.
- I tired recovery menu but it shows the red triangle on the phone then again to Welcome Screen.
- When I connect the phone to the PC the HTC Sync Manager doesn't recognize it in this state.
- The only case when HTC Sync Manager recognizes it is when I go to the hard rest menu and choose Fastboot.
- I downloaded HTC RUU for international phones from the official USA website (I bought the phone unlocked from Egypt) and it started working for few seconds then it prompt error 130.
As you would get, I'm not a very technical guy but I'm welling to do anything to get my device working. I currently use iPhone 5 as a backup phone, and what a horrible device.
Please help me out as I'm now in Germany and so far I could not find a store to help me get my phone back. Send me step by step links or videos and I will follow the procedures.
Thanks a lot for your help.
Click to expand...
Click to collapse
What? HTC's US website doesn't have the International RUU. Only US RUUs. That's what the error 130 is. Wrong Model ID.
Here is the RUU that you need.
It's a .zip not a .exe, so you'll either have to flash it via fastboot or via your extSD.
To flash via SD, rename the file to 0P6BIMG and place it onto your extSD. Boot into bootloader, and then hboot if the process doesn't start automatically (it should). Then follow the prompts. Vol up to flash, power button to reboot. Super easy.
Hello xunholyx
Thank you very much for helping me out...
I did exactly like you said and it worked beautifully ! No problems at all ....
Many many thanks for the help
LostMan1991 said:
Hello xunholyx
Thank you very much for helping me out...
I did exactly like you said and it worked beautifully ! No problems at all ....
Many many thanks for the help
Click to expand...
Click to collapse
Cool!
I forgot to mention though that you should either rename or delete the RUU.zip from your extSD after the flash, otherwise every time you boot to bootloader it'll try to update again.
please help my oneplus 3 can't boot to system or recovery after unbricking with mega unbrick method 1 and 2
the phone boot to black screen and led notification shining white
i try unbricking method again and flash recovery from fastboot dosn't work
sorry my english
Did you solved? I have the same issue ... No ideea what to do... How did you solved?
bibiii79 said:
Did you solved? I have the same issue ... No ideea what to do... How did you solved?
Click to expand...
Click to collapse
If you follow the instructions for method 2, and repeatedly do it a few times, you can succeed. The important thing is to follow the instructions strictly, however silly they may look like.
I did several times, double checking all steps, still boot loop. After apply the method 2 , is doing a boot loop. Than I tried to apply again method 2 I have the successful download with green ...than I go in recovery and flash over adb sideload oos 3.2.8 ...than I start , no more boot loop, but after Oneplus logo goes into black screen with a withe stable notification led turned on ....I left over night ... But it keep staying like that until I force to power off by pressing and holding power button( after I want to turn off i cannot only going into bootloader and from there I choose power of, because is automatically turning on if I press and hold only the power button in order to turn off the device).
Pfiu difficult... I am thinking, some files are missing, this , and where I go in bootloader in missing the values on. Bootloader version- , and baseband version- ....
bibiii79 said:
I did several times, double checking all steps, still boot loop. After apply the method 2 , is doing a boot loop. Than I tried to apply again method 2 I have the successful download with green ...than I go in recovery and flash over adb sideload oos 3.2.8 ...than I start , no more boot loop, but after Oneplus logo goes into black screen with a withe stable notification led turned on ....I left over night ... But it keep staying like that until I force to power off by pressing and holding power button( after I want to turn off i cannot only going into bootloader and from there I choose power of, because is automatically turning on if I press and hold only the power button in order to turn off the device).
Pfiu difficult... I am thinking, some files are missing, this , and where I go in bootloader in missing the values on. Bootloader version- , and baseband version- ....
Click to expand...
Click to collapse
The bootloader and baseband versions were missing when i bought the phone new and are still blank today after flashing a few ROMs and Recoveries/Firmware and modems. So that is not an issue.
Are you downloading the correct files?
tnsmani said:
The bootloader and baseband versions were missing when i bought the phone new and are still blank today after flashing a few ROMs and Recoveries/Firmware and modems. So that is not an issue.
Are you downloading the correct files?
Click to expand...
Click to collapse
Yes, I am using the unbrick method with msm download tool, using the Method 2, after apply, installing all's the Qualcomm drivers 9008 , drivers signature off in windows.... The unbrick tool is passed with the green message .... Reversing back to oos 3.1.2 Android 6.0.1 ..stock, I have recovery working and bootloader also working, bootloader is locked ....so I cannot do too mutch. I start the device right away after unbrick tool and still boot to op logo that is going to vibrate as restart .... And stays in boot loop. Next step I go into recovery , and do over sideload an update with a full ROM, oos 4.0.1 , also tried with full ROM 3.2.8 ...I can sideload the whole ROM , than i start the device and after op logo goes in black screen and white motivation led lighted .... I leave it for 30 min, and still in the same, now I force turn off by going into bootloader and power off. Notice that after this sideload flash I cannot access the recovery. So I need to apply back the unbrick msm download tool for op3.
I tried also to flash over sideload a signed script from Ahmed , unified toolkit , to activate the USB debugging, but gives an error.
I run out of ideas .....any help is welcome ....
Thanks
bibiii79 said:
Yes, I am using the unbrick method with msm download tool, using the Method 2, after apply, installing all's the Qualcomm drivers 9008 , drivers signature off in windows.... The unbrick tool is passed with the green message .... Reversing back to oos 3.1.2 Android 6.0.1 ..stock, I have recovery working and bootloader also working, bootloader is locked ....so I cannot do too mutch. I start the device right away after unbrick tool and still boot to op logo that is going to vibrate as restart .... And stays in boot loop. Next step I go into recovery , and do over sideload an update with a full ROM, oos 4.0.1 , also tried with full ROM 3.2.8 ...I can sideload the whole ROM , than i start the device and after op logo goes in black screen and white motivation led lighted .... I leave it for 30 min, and still in the same, now I force turn off by going into bootloader and power off. Notice that after this sideload flash I cannot access the recovery. So I need to apply back the unbrick msm download tool for op3.
I tried also to flash over sideload a signed script from Ahmed , unified toolkit , to activate the USB debugging, but gives an error.
I run out of ideas .....any help is welcome ....
Thanks
Click to expand...
Click to collapse
Hi bro, did you solved it? Im facing the same problem here
bluuquthug said:
Hi bro, did you solved it? Im facing the same problem here
Click to expand...
Click to collapse
Unfortunately not yet ... Yes I solve it, I bought a Moto Z with dual SIM and snapdragon 820 and 64 GB and SD card with 280 euro .... I am disappointed at the moment about Oneplus 3 , I was a Nexus fan and switched to oneplus ... I thought will be opensource ... But way to expensive repair this done in service , Easter to buy another one ... You save time .. you cannot save money on it ..
bibiii79 said:
Unfortunately not yet ... Yes I solve it, I bought a Moto Z with dual SIM and snapdragon 820 and 64 GB and SD card with 280 euro .... I am disappointed at the moment about Oneplus 3 , I was a Nexus fan and switched to oneplus ... I thought will be opensource ... But way to expensive repair this done in service , Easter to buy another one ... You save time .. you cannot save money on it ..
Click to expand...
Click to collapse
Had the same problem with my oneplus x.
P
oneszero said:
Had the same problem with my oneplus x.
Click to expand...
Click to collapse
And what was the end of your story with Oneplus x?
bibiii79 said:
P
And what was the end of your story with Oneplus x?
Click to expand...
Click to collapse
RMA'd it to a service center for repair, after two tech support calls. They actually told me that they couldn't repair it due to "water damage." Funny thing is, that phone was never dropped in or on anything, let alone in WATER. Then to add insult to injury they refused to send it back to me stating that I had to pay for return shipping. My wife got on the phone with them and by the end of the phone call they said that they would send it back for free. HAHA. So I bought a Oneplus 3 after that whole ordeal. All the while the Oneplus X sat in the box on my desk for about 5 months. Last week I decided to pick it up and tinker with it some more. I scoured the net trying to find any other programs or solutions that I hadn't tried prior to sending it off. I came across somethings that I hadn't seen before. https://forum.xda-developers.com/oneplus-x/help/fastboot-mode-available-stuck-kindly-t3387918. http://rootmygalaxy.net/oneplus-x-s...w.pickmod.com/rom/4187/coloros-for-oneplus-x/. Ended up flashing Color OS via msm tool. Wouldn't load OS, but i didn't end up with a black screen and white LED, it just sat there. So right after I flashed Color OS, i Flashed the mini unbrick tool by Naman, and BOOM it booted into OS. Hope this helps.