Related
Is this the highest?
http://www.seidioonline.com/product-p/pmc.htm
Post links if you know of higher ones, thank you.
Sent from my ADR6400L using XDA App
There are 2.1A usb adapters, but I don't think microUSB can take advantage of it. The one you linked is a 1A, which is the same as the wall charger HTC gave with the phone. I'm currently using a 1A usb adapter in my truck.
Ok that's probably what I'm looking for then. Are there wall chargers greater than what came with the phone that I can take advantage of?
Your best bet would be to try the USB adapters made for iPads. The Apple products can utilize the 2.1A chargers with their sync cables, but I'm not sure if a microUSB cable can though. I have some 2.1A wallchargers from some of my Apple products, I'll test them later and let you know what I find out.
http://www.verizonwireless.com/b2c/...ryDetails&archetypeId=12299&accessoryId=46370
I just got an Enercell from Radio Shack with dual usbs. Max output is 2.5A divided between the two ports.
http://www.radioshack.com/product/index.jsp?productId=11329448
on sale now for only $14.99. Seems to be of good quality.
The Motorola rapid chargers rock.
Guys, unless you mod the usb adapter 5V spec, you aren't doing squat with a "high power" adapter. The device has an input impedence that will draw a certain amount of current at 5v., and that's it.
Standard battery: 1400 mAh
Time to charge: 4 hrs (according to manual)
That's 1400/4 = 350 mA.
Most adapters on the market spec more than that, they're usually 500 mA or above. And again, unless you boost the volts, you're not going to be able to push more than 350 mA or so.
So don't waste you're money.
On the other hand, if your going to share a car outlet with another device like mp3 or ipod, then yeah, you'll need a higher output, two port, adapter.
Edit: It just occurred to me that if you're using the phone heavily while charging, then yeah you may need more than 500 mA. My currrent widget shows the phone can draw another 250 mA or so during use. That plus the charge totals to around 600 mA. But depending upon design, the phone may not be able to pull in all 600 mA. A test with a current meter would be real interesting.
The charger shipped with the Thunderbolt is a 1 Amp charger.
If I use a 500 mA charger the Current Widget shows a +450mA charge current. However if I use the 1A charger, I get a charge current of about +850mA.
Given that the google navigation gobbles over 400mA when running, you need a car charger with greater than 500mA capacity of you want the phone to charge at the same time.
Sent from my ADR6400L using XDA App
boingboingbilly said:
The Motorola rapid chargers rock.
Click to expand...
Click to collapse
Good to hear, I ordered one today for $11 on ebay. I had heard other people say they liked that one too.
Ecomaniac said:
Guys, unless you mod the usb adapter 5V spec, you aren't doing squat with a "high power" adapter. The device has an input impedence that will draw a certain amount of current at 5v., and that's it.
Standard battery: 1400 mAh
Time to charge: 4 hrs (according to manual)
That's 1400/4 = 350 mA.
Click to expand...
Click to collapse
You're making the incorrect assumptions that the charging rate is constant, and charging is 100% efficient. Li-ion batteries can be charged at up to a 1C rate (i.e. 1.4A for a 1400 mA cell). Add the power drawn by the phone itself, and a 1.8 Amp charger might not be unreasonable (1.8 A is the specified limit for micro USB connectors). Whether the phone will actually do a maximum rate charge, I don't know.
This, from a TI Application Note (Google for SLAA287, board won't let me post links):
A Li-Ion battery charging process consists of three stages:
· Slow Charge: Pre-charging stage using current of 0.1C
· Fast Charge: Constant current charging stage using current of 1C
· Constant voltage charging stage
During the slow charge stage, the battery is charged with a constant low charge current of 0.1C, if the battery voltage is below 2.5V. The slow charge stage is rarely used during the charging process of a Li-Ion battery.
The fast charge (constant current) and constant voltage charging are the most important stages during a recharge process. Most Li-Ion batteries have a fully charged voltage of 4.1 or 4.2V.
The battery is first charged with a constant current of 1C until a battery voltage reaches 4.1 or 4.2V. The firmware continuously checks the charging current by sensing the voltage at the current sense resistor (Rsense) and
adjusts the duty cycle of PWM output from the MCU. The battery's voltage is checked frequently.
Whenever found the battery's voltage reaches 4.1 or 4.2V, the charger will switch to constant voltage charging mode. The battery is then charged with a constant voltage source at a fixed battery voltage of 4.1 or 4.2 V...When the charging current falls below 0.1C, the charging process must stop.
Click to expand...
Click to collapse
Monoprice has Cig to USB(1A) chargers and the USB to Micro cables in multiple lengths(I ordered 6' ones) for far cheaper than you will find anywhere else
mike.s said:
You're making the incorrect assumptions that the charging rate is constant, and charging is 100% efficient. Li-ion batteries can be charged at up to a 1C rate (i.e. 1.4A for a 1400 mA cell). Add the power drawn by the phone itself, and a 1.8 Amp charger might not be unreasonable (1.8 A is the specified limit for micro USB connectors). Whether the phone will actually do a maximum rate charge, I don't know.
This, from a TI Application Note (Google for SLAA287, board won't let me post links):
Click to expand...
Click to collapse
very useful, thanks!
walbuls said:
Monoprice has Cig to USB(1A) chargers and the USB to Micro cables in multiple lengths(I ordered 6' ones) for far cheaper than you will find anywhere else
Click to expand...
Click to collapse
I second monoprice.
I tried bunch of cig to usb car charger and none matched advertised output... They all showed Charging (USB). I now use AC inverter and it charges just like a wall charger.
eccenpix said:
I tried bunch of cig to usb car charger and none matched advertised output... They all showed Charging (USB). I now use AC inverter and it charges just like a wall charger.
Click to expand...
Click to collapse
I suspect you need to find one which properly follows the USB Battery Charging Specification. That link is to the most recent version, which came out on 7Dec2010 (remember Pearl Harbor!). Version 1.1 is easier - a Dedicated Charging Port is indicated by shorting together the data lines (the two middle conductors on a full sized USB connector. By doing so, it indicates the device may try to draw up to 1.8 A of current (although a dedicated charging port is allowed to limit the current to less than that, it must provide at least 1.5 A).
I bought a cheap USB hub with 5 ports, used an exacto knife to cut the traces going to the data lines (the middle two) on all the ports, and then shorted them together on each port. It's now no longer a USB hub, but a USB charger with 5 ports I can used to charge stuff (phone and Bluetooth, quite often). The AC adapter which it came with does 2 Amps. My Thunderbolt says "Charging (AC)" when plugged into it.
So, if you can open up one of your adapters, just solder a jumper between the middle two contacts (make sure they're not connected to anything else).
Just got the Rocketfish premium microUSB at Best Buy and it has a captive coiled cord and a USB port. TBolt says "AC plugged" and reads +670 mA.
Good choice on the Motorola Rapid Charge - I've burned through 3 other cheap car chargers trying to keep my phone alive while using Google Nav and this is the first one to work!
i have the rapid motorola one on amazon
lippstuh said:
i have the rapid motorola one on amazon
Click to expand...
Click to collapse
+1 Works great! Battery widget usually shows about +800mA while only charging. Real close to the wall charger
I read in some posts that some car chargers can't raise the battery level while the phone is in GPS mode, because the phone consumes the battery to fast. Also, I read that it heats up if a incompatible car charger is used. From my understanding it's something to do about the voltage, because original Samsung car charger use a different voltage?
Can anyone explain please this and tell me if this model, Belkin FM Transmitter F8Z439ea, it's compatible with SGSII? It would be much appreciated.
If not, does anyone can recommend something similar?
(FM transmitter + car charger = all-in-one)
I have one of these... It is very good indeed. Alas, i haven't got round to putting music on it yet. I can tell you that this and my other car charger seems to leave my phone becoming rather hot.
I hadn't heard about drain being to much for stock charger. Thx.
Sent from my GT-I9100 using XDA Premium App
More info...
So, after searching through the threads and google, i found out that:
Samsung Power Charger / Car Charger - 5V - 700mA
USB 2.0 - 5V - 500mA
USB 3.0 - 5V - 900mA
It seems that due to a software limitation SGSII can only accept 650mA input... So any other chargers that have higher amperage won't make any difference. Also, it seems that charging with lower amperage increases battery life, maybe that's why Samsung set this limitation, but many complain that isn't enough to charge the phone while in GPS mode.
Can you tell me please what amperage does this Belkin car charger has?
And if it's successfully charging your phone while using GPS?
i bought that Motorola Rapid Car charger recent and have been using it about a week now. i've noticed that it doesn't seem to charge my Thunderbolt any faster then it did when i was using the Thunderbolt's USB cable with this USB car charger adapter.
so, my question is, why is it called "rapid" if it doesn't charge any faster?
and i suppose secondly, is there an actual microUSB charger that will charge the Thunderbolt faster?
they make one for the iphone that will fully charge it in 30 minutes so i know they are out there.
voxigenboy said:
i bought that Motorola Rapid Car charger recent and have been using it about a week now. i've noticed that it doesn't seem to charge my Thunderbolt any faster then it did when i was using the Thunderbolt's USB cable with this USB car charger adapter.
Click to expand...
Click to collapse
Maybe you should try this one.
Install the battery monitor widget. Monitor the battery for about 20 minutes while charging. Tell us what the charge current is.
Does the Motorola charger include a cable? If not, you may just have a weak cable. I have seen cheap cables with wire so thin that the charging current is no better then charging off a weak USB port.
My experience has been that the phone typically recognizes car charges as USB charging and uses a different charging profile. My solution to that is use a wall charger through an inverter or a kernel that doesn't use radically different charging profiles for A/C and USB.
loonatik78 said:
My experience has been that the phone typically recognizes car charges as USB charging and uses a different charging profile. My solution to that is use a wall charger through an inverter or a kernel that doesn't use radically different charging profiles for A/C and USB.
Click to expand...
Click to collapse
No need for that.
Cut a small piece of aluminum foil. Carefully place it where it shorts the two center conductors in the charger. Plug the USB cable into the charger. Make sure the foil stays in place over the two center conductors.
It is now a high rate charger. (assuming it can put out 1 amp.)
The limiting factor is typically the usb cable itself. Most usb cables can't support the 1amp that is provided to it. Since you used the original usb cable that came with the thunderbolt (that's been "shorted" as mentioned above" ) it will be just as fast as the moto car charger. the 1amp charging rate that the moto charger charges at (i have one) and that the original one charges at are already "rapid". if you plugged a normal usb cable from somewhere else into the other usb car charger, it'd be much much slower
squeakyl said:
The limiting factor is typically the usb cable itself. Most usb cables can't support the 1amp that is provided to it. Since you used the original usb cable that came with the thunderbolt (that's been "shorted" as mentioned above" ) it will be just as fast as the moto car charger. the 1amp charging rate that the moto charger charges at (i have one) and that the original one charges at are already "rapid". if you plugged a normal usb cable from somewhere else into the other usb car charger, it'd be much much slower
Click to expand...
Click to collapse
The stock charger is what shorts the connections. The cable is NOT shorted on the two inner pins because they are the data connections used for connecting your phone to a computer.
doodlebro said:
The stock charger is what shorts the connections. The cable is NOT shorted on the two inner pins because they are the data connections used for connecting your phone to a computer.
Click to expand...
Click to collapse
To meet the USB charging spec (which the TB uses), the two inner (data) contacts should be shorted with no more that 200 ohms.
But, the cable can also be an issue for rapid charging. The voltage drop for a 1A/5V source, across only .5 M of 28 gauge copper is ~220 mV. If you use a longer cable, there's more voltage drop. The TB likely current limits itself when the voltage drops below a certain threshold. Best to buy 24 gauge USB cables, if you can, especially if getting longer ones (monoprice has them).
voxigenboy said:
i bought that Motorola Rapid Car charger recent and have been using it about a week now. i've noticed that it doesn't seem to charge my Thunderbolt any faster then it did when i was using the Thunderbolt's USB cable with this USB car charger adapter.
so, my question is, why is it called "rapid" if it doesn't charge any faster?
Click to expand...
Click to collapse
I think its a matter of rated output current. BUT on the other side, the phone must be capable of drawing/using that much current. If the adapter is rated for more current than the phone can charge, the "extra" current wont be supplied.
Initially, Moto's standard car chargers output 5V and up to 550ma max (just like a standard PC USB port) so they didn't charge phones all that fast. Moto then came out with chargers that had higher current output, so they were capable of charging the phones "faster" than the original car chargers (but on par with the home/travel/AC chargers) and called them "rapid car chargers"..
Today, the current output on the Moto SPN5400A car charger is 0-950mA, and I've seen it sometimes referred to as "Rapid Car charger."
But as far as I know, Moto no longer makes/sells the lower current car chargers, and their web site only shows one MicroUSB and one MiniUSB car charger for sale, both of which appear to be of the 0-950mA output variety.
voxigenboy said:
and i suppose secondly, is there an actual microUSB charger that will charge the Thunderbolt faster?
they make one for the iphone that will fully charge it in 30 minutes so i know they are out there.
Click to expand...
Click to collapse
Just because someone makes such a charger for the iPhone, doesn't mean one must exist for the TB, or other phones, does it? I know the iPad uses a 2A charger. What happens if you connect an iPhone to that? will it charge faster? I guess that depends on if the iPhone is capable of drawing more than 1A to charge it.
I've not seen a "home" or AC charger that can charge the TB any faster than the Stock 1A charger. Does such a thing exist?
A proper car charger with 950mA to 1A output should charge the TB at almost exactly the same rate as the stock 1A wall/AC charger.
And btw, the Moto SPN5400A car charger DOES charge my TB in about the same amount of time that it takes me to charge my TB at home with the stock HTC charger. So while its not "rapid" compared to the stock home/travel/AC charger, its "rapid" compared to PC USB Port charging, or a plain lower current car charger.
KidJoe said:
I've not seen a "home" or AC charger that can charge the TB any faster than the Stock 1A charger. Does such a thing exist?
A proper car charger with 950mA to 1A output should charge the TB at almost exactly the same rate as the stock 1A wall/AC charger.
Click to expand...
Click to collapse
I made a charger for my motorcycle. I use it as a GPS, screen on MAX, phone active with marginal signal. And I wanted to actually charge the battery at the same time. I did a lot of experimenting with the Thunderbolt. It would not exceed a pull of about 850ma from the supply, even at 5.5 volts. IMHO, you are wasting time looking for any charger over 1 amp.
Also, even with about 850ma in, not much over 500ma is getting to the battery. So a totally dead battery is still going to take between 2 and 3 hours to charge, no matter what charger you have. And twice that long if the charger looks like a PC USB port.
worwig said:
I made a charger for my motorcycle. I use it as a GPS, screen on MAX, phone active with marginal signal. And I wanted to actually charge the battery at the same time. I did a lot of experimenting with the Thunderbolt. It would not exceed a pull of about 850ma from the supply, even at 5.5 volts. IMHO, you are wasting time looking for any charger over 1 amp.
Click to expand...
Click to collapse
I was asking because of the OP's statement about knowing "they must exist" because they are out there for the iPhone.
I'm perfectly happy with my Moto car charger, and how fast it charges my phones.
I bought an OEM Samsung wall charger that charges at 1 Ampere. I started to charge my Zerolemon battery with it yesterday at about 6pm and here it is today and it is only at about 80% charge rate. Something is not right. I contacted the seller and they told me that the charger is from Samsung and it charges at 1 Ampere. It is either the charger is a knock off or my Micro-usb cable that connects into the wall charger is not the right kind.
Are there different variations of micro-usb cables that will work better? Some that allow more current to flow over them than others? My cable says that it is 28awg/2C. I remember when I had a playstation 3 I had problems with syncing the device with my playstation 3 with the USB cables I had bought. After tons of research it was the USB cables that were the issue. They didn't allow enough current to work properly with the PS3. I'm starting to wonder if I'm having the same issue with the Samsung Wall Charger. Is the 28awg wire gauge too thin?
---->[email protected]<---- said:
I bought an OEM Samsung wall charger that charges at 1 Ampere. I started to charge my Zerolemon battery with it yesterday at about 6pm and here it is today and it is only at about 80% charge rate. Something is not right. I contacted the seller and they told me that the charger is from Samsung and it charges at 1 Ampere. It is either the charger is a knock off or my Micro-usb cable that connects into the wall charger is not the right kind.
Are there different variations of micro-usb cables that will work better? Some that allow more current to flow over them than others? My cable says that it is 28awg/2C. I remember when I had a playstation 3 I had problems with syncing the device with my playstation 3 with the USB cables I had bought. After tons of research it was the USB cables that were the issue. They didn't allow enough current to work properly with the PS3. I'm starting to wonder if I'm having the same issue with the Samsung Wall Charger. Is the 28awg wire gauge too thin?
Click to expand...
Click to collapse
- charger is rated 1amp but usually puts out less depending on the quality and efficiency of it. You won't get the fastest charge with a 1amp psu. Get yourself a cheap 2amp and have plenty of headroom.
- also, if voltage in your wall outlet is low (rare) that would affect psu output.
- yes super thin usb cables can be part of the cause.
- of course, if the cable is meant for PC charging, it will be wired in such a way, to not exceed 450ma (or so) whereas a usb cable or charger that is meant and wired for fast charge, will provide...for me...1150ma (Search/Research my past posts for more detailed info)
- also, most kernels, slow down the charge rate as the batter gets closer to 100% charge.
- a bad battery or custom kernel with bad code, could both affect charging speed.
As the title I'm having problems charging. A lot of the time the battery is discharging and requires being charged inside, where it does charge consistent and fast!
I the car I have a 10amp 5v dc/dc converter providing the power, I have the thick cable OTG from amazon, along with Amazon basic USB cable extensions, and a 4 port hub.
I've used different chargers, even dual chargers with a USB hub that had independent power, I changed the OTG cable, Heck I even changed TABLETS! From a Wi-Fi to an LTE. The only common thread is the backup camera and Timur's kernel.
Considering it charges perfectly plugged into a wall I assume it's not the kernel.
I've seen at least one other with this issue, Any ideas? I've been playing with this for months and as mentioned have changed every aspect of the install except the camera.
fr4nk1yn said:
As the title I'm having problems charging. A lot of the time the battery is discharging and requires being charged inside, where it does charge consistent and fast! I the car I have a 10amp 5v dc/dc converter providing the power, ...
Click to expand...
Click to collapse
These car chargers supply perfect 5.0V while your original Asus AC charger delivers 5.2V (have a look at its specs). Believe it or not, 0.2V makes the difference, and at 5.0V your tablet will not charge reliably. I actually use a regulated PSU set higher, at 5.3V, to compensate for voltage drop on poor USB cables.
Look for 5.2V/2A car charger and use max 1m quality USB cable, no hubs.
Thanks. The charger is indeed 5.2v. Odd. What charger are you using?
This is the one I have: https://www.amazon.com/Converter-Re...1513386282&sr=8-8&keywords=dc+to+dc+converter and it puts out 5.1v
I found it was only getting 8v-10.5v and wired it directly to the car's wiring, I was using spades previously to connct to the Aux power connector, Getting full 14.2v made no difference to the tablet's charging.
Next I removed the tablet and plugged it into a 5v/2amp wall charger using the old OTG and the old 3 foot USB extension cable. It charges consistently between 580 - 740mA. Meanwhile it went dead installed in the dash, again.
fr4nk1yn said:
This is the one I have: https://www.amazon.com/Converter-Re...1513386282&sr=8-8&keywords=dc+to+dc+converter and it puts out 5.1v.... Meanwhile it went dead installed in the dash, again.
Click to expand...
Click to collapse
To diagnose this problem you will have to acquire a simple, cheap USB meter and connect it as close as possible to N7. Note on the attachment my N7, 15cm USB cable and a tester measuring 5.18V. Please post your voltage reading.
I bought a 3amp adjustable DC to DC converter.
Set the voltage to 5.3v initially, then measured at the end of my 1 meter USB extension cable. It was still 5.3 so I dropped it back to 5.2v.
Plugged the tablet in, and it's immediately discharging at 563mAh. No apparent change after some use.
Thanks @k23m for the help. This thing just deteriorated. Something pulling a huge amount of power too. Sucked a fully charged battery to 0 in a day of of running errands. And it was sluggish beyond belief. I thought the ROM might be corrupt.
So I did the battery removal mod. It's working great on the bench so it's being wired up tomorrow. Thanks again.