Develop Bugs

What to do now ?

Hi,
I tried to load a HardSPL on my Diamond but it went wrong somehow.
My Diamond was stuck at 75% and everything went blank.
Now I can't power it up and even if I put in the power supply doesn't lid up the light of charging.
Is it dead? Can I throw it away? Or is there something I can do ?
THX

may sound stupid but have you tried to remove the battery

Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html

1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick

karlanal said:
may sound stupid but have you tried to remove the battery
Click to expand...
Click to collapse
Yes nothing

nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
Nope, nothing

solidpowder said:
Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
Click to expand...
Click to collapse
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.

lmdiablo said:
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.
Click to expand...
Click to collapse
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?

solidpowder said:
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?
Click to expand...
Click to collapse
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5

lmdiablo said:
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5
Click to expand...
Click to collapse
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader

solidpowder said:
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader
Click to expand...
Click to collapse
Nope didn't work, Battery was out for 6 hours...

So has anyone any a good tip or should I trough it in the garbage

can you try with an other battery cell ?

solidpowder said:
can you try with an other battery cell ?
Click to expand...
Click to collapse
Already did, my friend has the same device.
Still doesn't do anything.
It's really dead.

nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
lmdiablo said:
Nope, nothing
Click to expand...
Click to collapse
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?

ciao99 said:
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?
Click to expand...
Click to collapse
No, it doesn't do anything.
No power up
Doesn't charge.
Nothing.

How old is your device? Diamond was launched in may 2008 so a big change it isn't older then 2 years. In europe HTC devices come standard with a 24 months warranty.
You could send it in for repair in that case, and since the device isn't booting at all, the changes HTC detects that it died during a 'warranty destroying' procedure are not that big. And if they do they will contact you prior to actual repairing/making costs.
Before throwing it away you could give this a try, nothing to loose huh?

HOX shutdowns

installing any rom shutsdown the HOX at some point.donno why.only if i connect the charger the phn turns on.tried to calibrate the battery.But no use..

n.vk1305 said:
installing any rom shutsdown the HOX at some point.donno why.only if i connect the charger the phn turns on.tried to calibrate the battery.But no use..
Click to expand...
Click to collapse
sorry man, could you give us some more infos? which rom? do you flash any mod? custom kernel? did you undervolt too much the cpu/core voltages?

n.vk1305 said:
installing any rom shutsdown the HOX at some point.donno why.only if i connect the charger the phn turns on.tried to calibrate the battery.But no use..
Click to expand...
Click to collapse
try to change the battery it is dead!!!

lukes91 said:
sorry man, could you give us some more infos? which rom? do you flash any mod? custom kernel? did you undervolt too much the cpu/core voltages?
Click to expand...
Click to collapse
actually i was on stock rom,bootloader unlocked. the problem started.thought it was a rom problem,then unlocked bootloader installed beanstack.same problem.now am running viper sense 5,still the same problem.the actual problem is the phone shutdowns unexpectedly,when i try to switch it on,boot animation appears as soon as the lockscreen loads again shutdowns.this repeats untill i connect the charger.
am not using any kind of custom kernel or undervolt.

Thant said:
try to change the battery it is dead!!!
Click to expand...
Click to collapse
it is my only option left,after a long search in google.i ended up here for help..

n.vk1305 said:
actually i was on stock rom,bootloader unlocked. the problem started.thought it was a rom problem,then unlocked bootloader installed beanstack.same problem.now am running viper sense 5,still the same problem.the actual problem is the phone shutdowns unexpectedly,when i try to switch it on,boot animation appears as soon as the lockscreen loads again shutdowns.this repeats untill i connect the charger.
am not using any kind of custom kernel or undervolt.
Click to expand...
Click to collapse
i fear @Thant is right... i was thinking of the same thing, but i hoped you would have told me you flashed a kernel and undervolted too much, so it could have been fixed without spending money... i fear you have to buy a new battery

lukes91 said:
i fear @Thant is right... i was thinking of the same thing, but i hoped you would have told me you flashed a kernel and undervolted too much, so it could have been fixed without spending money... i fear you have to buy a new battery
Click to expand...
Click to collapse
thankyou for the swift replay,will change the battery pack and let you know..!!

[Q] xperia zl update issue

having a major issue with update I completed it this morning and not my phone does not want to turn on properly it powers up to lock screen but when I touch screen and shuts off if I let it boot up a bit longer im able to use it but as soon as I use camera the phone shuts off what can I do PLEASE PLEASE PLEASE HELP

i have this problem plz help!!!

plz help!!!!!
i needed phone!!!
but not working normally in battery!

jeff5454 said:
having a major issue with update I completed it this morning and not my phone does not want to turn on properly it powers up to lock screen but when I touch screen and shuts off if I let it boot up a bit longer im able to use it but as soon as I use camera the phone shuts off what can I do PLEASE PLEASE PLEASE HELP
Click to expand...
Click to collapse
silverbios said:
i have this problem plz help!!!
Click to expand...
Click to collapse
silverbios said:
plz help!!!!!
i needed phone!!!
but not working normally in battery!
Click to expand...
Click to collapse
Well, i never experienced the problem...
But i think the problem is on battery..
Try to replace it
Sent from my C6506 using Tapatalk

AndreIrawan97 said:
Well, i never experienced the problem...
But i think the problem is on battery..
Try to replace it
Sent from my C6506 using Tapatalk
Click to expand...
Click to collapse
battery testing and ok!!!
probably problem with ta!!!

idea?

AndreIrawan97 said:
Well, i never experienced the problem...
But i think the problem is on battery..
Try to replace it
Sent from my C6506 using Tapatalk
Click to expand...
Click to collapse
i don't think its battey its self but the update was for battery and camera I think the battery is telling the phone its dead when its not it will turn on when I plug in and stay on until I go into camera and then wont turn back on until I plug it in iwas told to flash it back to android 4.3 but I don't know how

jeff5454 said:
i don't think its battey its self but the update was for battery and camera I think the battery is telling the phone its dead when its not it will turn on when I plug in and stay on until I go into camera and then wont turn back on until I plug it in iwas told to flash it back to android 4.3 but I don't know how
Click to expand...
Click to collapse
Well, download the FTF file, then download flastool on flashtool.net
And turn off ur phone and plug the usb while hold the vol down button...
And click on thunder icon on flashtool, and select the FTF, click flash and done
Sent from my C6506 using Tapatalk

to all those who has faced this issue you can solve it by repair using SUS or PCC. so there is nothing to worry except you will lose your data

coolrevi said:
to all those who has faced this issue you can solve it by repair using SUS or PCC. so there is nothing to worry except you will lose your data
Click to expand...
Click to collapse
Tried pcc and redownloaded upgrade still not working right

jeff5454 said:
i don't think its battey its self but the update was for battery and camera I think the battery is telling the phone its dead when its not it will turn on when I plug in and stay on until I go into camera and then wont turn back on until I plug it in iwas told to flash it back to android 4.3 but I don't know how
Click to expand...
Click to collapse
exactly!!!!!!!!:crying:
Your problem is exactly like my problem.
I spoke with an engineer technicians Mobile!
Nfc and the rest of your old device and then he say firmware update, or flash custom kernel looking into the firmware itself could have some!
Or wait for Sony to be updated!
So tell me, but also my previous version was 4.3!
i probably bug in rom!!!
I think it's not bad, we reported Sony or Mr. @DooMLoRD

silverbios said:
exactly!!!!!!!!:crying:
Your problem is exactly like my problem.
I spoke with an engineer technicians Mobile!
Nfc and the rest of your old device and then he say firmware update, or flash custom kernel looking into the firmware itself could have some!
Or wait for Sony to be updated!
So tell me, but also my previous version was 4.3!
i probably bug in rom!!!
I think it's not bad, we reported Sony or Mr. @DooMLoRD
Click to expand...
Click to collapse
Yea I talked to Sony they said call Ur provider but both Sony and bell think it's hardware issue

jeff5454 said:
Yea I talked to Sony they said call Ur provider but both Sony and bell think it's hardware issue
Click to expand...
Click to collapse
no!!!
Are wrong hardware is completely safe!!!
problem in some firmware or ta!!!
meanwhile:
hardware problem not occur suddenly for no reason.

silverbios said:
no!!!
Are wrong hardware is completely safe!!!
problem in some firmware or ta!!!
meanwhile:
hardware problem not occur suddenly for no reason.
Click to expand...
Click to collapse
Please stop with the "!!"
If device starts when connected to charger then your problem will be solved when you change battery. Don't loose time on any other speculation
Nothing else to add, kudos!

battery stuck at 50%

hi everyOne
2days ago,I fully charged my phone.(100%)
after using it for a hours,i see that my battery stay at 100%
then I reboot.and my battery become 50%!!!
after that until todat it stuck at 50%.
i use Factory reset,but nothing happened.
(sorry For my bad English)
tanx

pooya.king said:
hi everyOne
2days ago,I fully charged my phone.(100%)
after using it for a hours,i see that my battery stay at 100%
then I reboot.and my battery become 50%!!!
after that until todat it stuck at 50%.
i use Factory reset,but nothing happened.
(sorry For my bad English)
tanx
Click to expand...
Click to collapse
you invented the eternal battery

Mfsto said:
you invented the eternal battery
Click to expand...
Click to collapse
Unfortunately no
After a while
My phone suddenly shutdown.
And I plugged my phone to it's charger.
But nothing happened
I push shutdown bottom and my phone turned on.
But still show 50%
I waited for a 3 hours plugged in,but nothing happened.
What should I do?

pooya.king said:
hi everyOne
2days ago,I fully charged my phone.(100%)
after using it for a hours,i see that my battery stay at 100%
then I reboot.and my battery become 50%!!!
after that until todat it stuck at 50%.
i use Factory reset,but nothing happened.
(sorry For my bad English)
tanx
Click to expand...
Click to collapse
The eternal battery invented you.

XDAvatar said:
The eternal battery invented you.
Click to expand...
Click to collapse
No, my battery suddenly finish out. With no sign (like red led doesn't show up)
And when I connect it's charger, the battery show 50% again.
Plz help.
...
Here is a screenshot from my phone

pooya.king said:
No, my battery suddenly finish out. With no sign (like red led doesn't show up)
And when I connect it's charger, the battery show 50% again.
Plz help.
...
Here is a screenshot from my phone
Click to expand...
Click to collapse
Install another ROM.

XDAvatar said:
Install another ROM.
Click to expand...
Click to collapse
I install This Rom B907
using this method http://forum.xda-developers.com/showthread.php?t=2531296
but the battery still stuck at 50%

pooya.king said:
I install This Rom B907
using this method http://forum.xda-developers.com/showthread.php?t=2531296
but the battery still stuck at 50%
Click to expand...
Click to collapse
Try Paranoid Android.

Have you tried Battery Repair or a Battery Calibrator yet?

XDAvatar said:
Try Paranoid Android.
Click to expand...
Click to collapse
my phone is Huawei Ascend Mate
and i don't see Paranoid Rom for it.
RabbidZ said:
Have you tried Battery Repair or a Battery Calibrator yet?
Click to expand...
Click to collapse
these software need 'ROOT'
And now i can't root my phone anyMore!!!!
I don't know why
i use ''Eroot_V1.3.4''
Eroot identify my phone,but when i hit root button,nothing happen
there is no SuperUser!!!!
Help PLZ

i install ''Root checker'' software
and it said ''Already Rooted''
after that i install SuperSU from Google play
but when I run SuperSU
it say: ''the SU binary needs to be updated,continue?''
i hit continue
and it's failed!!
here is the screenShots

Same problem, stuck at 50%
news?

:crying:
Help?

RabbidZ said:
Have you tried Battery Repair or a Battery Calibrator yet?
Click to expand...
Click to collapse
After a master reset, my supersu work fine
But
I use a lot of software like “battery refresh” “battery calibrator”
But nothing changed
AleSSi0 said:
Same problem, stuck at 50%
news?
Click to expand...
Click to collapse
AleSSi0 said:
:crying:
Help?
Click to expand...
Click to collapse
And still stuck at 50%

i install twrp recovery and wipe everything
and now i install CyanogenMod Rom
bu battery STUCK at 50%
nothing changed
is it a hardware Problem?

pooya.king said:
i install twrp recovery and wipe everything
and now i install CyanogenMod Rom
bu battery STUCK at 50%
nothing changed
is it a hardware Problem?
Click to expand...
Click to collapse
Sounds like a hardware problem. Return to stock and take the phone to service.

Please try this: Charge your phone to 100 % and don't unplug it. Charge it a few hours more. Maybe this helps.

Hardware problem.
Change the battery, problem fixed.

I found a link that may be useful
http://www.pandawillforum.com/showthread.php?19208-ICOU7-battery-problem-Battery-stuck-at-100
Plz check it.what is your idea about that link?
...
One more question:
I know how to open mate back door, but i wasn't able to detach battery.
How should i do that?

[Q] bricked xperia ion after flashing firmware

So.. my xperia ion kept said there was new system update. Which was 6.2.b..221 i think. But i unlocked the bootloader so i had to flash firmware on computer. So i downloaded on website where it said lt28h/lt28i latest firmware. I flashed it and my phone went reboot loop. It turns on, show sony logo, went blackscreen, reboots and repeat. So i did hard reset which made situation worse. I let it drain for 3 hour and charged it for 5 hlur.(red led showd right when i put charger.) It got on charge screen but i was stupid, hoping it to turn on normally and be my friend forever as it used to. But got on reboot loop again so i did soft reset because i didnt want let the battery drain for long time and charge it again. But it stuck at blink screen. Or black screen. You know how does this screen look like? It's not real black but the screen has little bit of light. So i could even use it as mirror.
I drained it overnight and now im charging it again(red led shows right when i put charger)
Anyone please help?

JustinBushke said:
....
I drained it overnight and now im charging it again(red led shows right when i put charger)
Anyone please help?
Click to expand...
Click to collapse
I think You flashed the wrong ftf file. Try downloading one from xda and flashing it again.

Mirhawk said:
I think You flashed the wrong ftf file. Try downloading one from xda and flashing it again.
Click to expand...
Click to collapse
I charged it for 3 hour and now it's on boot loop. Turns on, sony logo, black screen and repeat. So any guide for it?... I have to press volume down and connect it to PC immediatly right? What if it just keep turns on,show logo,blackscreen and repeat..?
(Sorry. It's my first time doing stuff with sony devices.

JustinBushke said:
I charged it for 3 hour and now it's on boot loop. Turns on, sony logo, black screen and repeat. So any guide for it?... I have to press volume down and connect it to PC immediatly right? What if it just keep turns on,show logo,blackscreen and repeat..?
(Sorry. It's my first time doing stuff with sony devices.
Click to expand...
Click to collapse
Yes, You have to connect immediately to pc. Don't let it be in continuous bootloop, it will drain out the battery. Did You try downloading a different ftf and flashing?

Mirhawk said:
Yes, You have to connect immediately to pc. Don't let it be in continuous bootloop, it will drain out the battery. Did You try downloading a different ftf and flashing?
Click to expand...
Click to collapse
well, now i just have to boot into flashmode and try flash. My ion is charged. And ready for flash. I live in Fairbanks in Alaska, is it possible for my ion to be roger's? Or do i download international something firmware? The thing is it said i have new update. The last few number was .221 i think . Mine is lt28i if that helps

JustinBushke said:
well, now i just have to boot into flashmode and try flash. My ion is charged. And ready for flash. I live in Fairbanks in Alaska, is it possible for my ion to be roger's? Or do i download international something firmware? The thing is it said i have new update. The last few number was .221 i think . Mine is lt28i if that helps
Click to expand...
Click to collapse
I don't know much about carrier firmwares, I would recommend waiting for someone who knows to reply. But I don't think flashing a world generic firmware would do any harm, still wait form someone to reply!

Mirhawk said:
I don't know much about carrier firmwares, I would recommend waiting for someone who knows to reply. But I don't think flashing a world generic firmware would do any harm, still wait form someone to reply!
Click to expand...
Click to collapse
my friend came back alive! thank you!
for those who got same problem like me
[IMPORTANT]
(make sure you get battery with thunder icon on the screen when you charge your ion after it died.(it will appear after battery got charged enough. it took me about 1hour i think.
make sure the screen goes off when unplgued from charger.
DO NOT touch anything before you boot into flashmode or fastbootmode otherwise you gotta drain the battery and charge it again!
1.download your device's firmware and put it into flashtool/firmware. in my case,(lt28i) i downloaded 6.1.E.3.7 stock frimware on xperia ion development section.
2.run flashtool,click thunder icon,click okay,select firmware that you downloaded and click flash. it will say it's preparing for flashing and say boot your device into flashmode.
3.NOW. Carefully. really Carefully press only volume down button and keep press it until you connect your device to computer. this is where i messd up and startes over.
4.there will be green LED if you got into flashmode. than the onlything you have to do is wait for the flashtool to finish flashing.
5.when it's done, take a deeeeep breath, disconnect, and press power button till you feel one single vibrate.your device will reboot and work as it used to!
i didnt lose any data(in every storage like built-in storage(?) or sdcard? and ext sdcard.) except that the apps that i installed was missing.

JustinBushke said:
my friend came back alive! thank you!
i didnt lose any data(in every storage like built-in storage(?) or sdcard? and ext sdcard.) except that the apps that i installed was missing.
Click to expand...
Click to collapse
Glad I could help. Only Your "system" and "data" partition would be formatted, not the internal(sdcard) and external(extsdcard) memory.
And "data" is where Your apps are installed, so those will go too.