Are they any case solution other then the one I've seen online from Sony Ericsson themselves.
Maybe a soft plastic PSP Go case can be cut in the middle to fit in.
I would be will to try buy a cheep one and try.
What do people think?
Inivisible Shelid All Over Protection
Hi there
Yes there is a solution to a case is the Zagg Invisible Shield All over Protection Scratch Proof aswell Uk Stockists is Mobilefun.co.uk in Stock Now I have ordered one last night.
Thanks
Mark
Got a PSP Go case from HMV for £5
Sent from my R800i using XDA App
I hope there will be an official case soon. Im kinda scared to scratch the screen.
I had a leather poach standard with my xperia play in the package
I don't know if it's country bounded or not what the content is
but basicly I got two things extra and that's a car poach and leather poach
the one I have seems to come from germany. Instructions were in german
Aightu said:
I hope there will be an official case soon. Im kinda scared to scratch the screen.
Click to expand...
Click to collapse
It comes with a screen protecter pre-installed.
emann56 said:
It comes with a screen protecter pre-installed.
Click to expand...
Click to collapse
Even then. I just want a case. Shame they dont provide one standard like with my TP2.
Aightu said:
Even then. I just want a case. Shame they dont provide one standard like with my TP2.
Click to expand...
Click to collapse
the standard screen protector is actually very good and scratch resistant. i've been using it for a week and a half, taking it to work and play, in and out of pockets, even ones with zips (although been extra careful here i guess!). and still not a single tiny scratch anywhere.
I’m currently looking for a silicon case for the Xperia Play, which should be the same as the ones available for the Arc.
Anyone noticed a case like that? =/
Looking for the same, Please inform me if you found any.
Best Regards.
Just bought the Sony Ericsson SMA7110 Executive Hard Case for Xperia Play off amazon (uk) was £15 when i bought, now only £11.20!! (typical lol) (instead of £25 off se site) Arrived today and it does the job fits well e.t.c. I think i may also look into Zagg Invisible Shield All over Protection for peace of mind. any comments on what the zagg shield is like steelmm?
Mozza2k11 said:
Just bought the Sony Ericsson SMA7110 Executive Hard Case for Xperia Play off amazon (uk) was £15 when i bought, now only £11.20!! (typical lol) (instead of £25 off se site) Arrived today and it does the job fits well e.t.c. I think i may also look into Zagg Invisible Shield All over Protection for peace of mind. any comments on what the zagg shield is like steelmm?
Click to expand...
Click to collapse
Thanks how does this work is it a clip on case or like a pouch that you have to take the phone in and out of.?
The Sony Ericsson SMA7110 Executive Hard Case has that elasticated middle, I guess its a snug fit? only worry is it would catch/scratch rear case?
At the moment still looking for a case but think I may just leave it with out. Keep screen protector fitted and then when the rear case can always be replaced if it gets damaged.
I had a Zagg kit once and know a lot of people who swear by them but they always end up pealing on the edge and look hideous when they do
Hopefully some decent cases or replacement covers will come out soon.
*it's back up to £14 on Amazon so you didn't do to bad Mozza2k11
marvi0 said:
Thanks how does this work is it a clip on case or like a pouch that you have to take the phone in and out of.?
Click to expand...
Click to collapse
This is official Sony Ericsson hard pouch case for the Xperia Play. It has a magnetised closing flap at front and as Laird mentioned the flap also doubles as a pull tab to remove the play.
Laird_Attwood said:
The Sony Ericsson SMA7110 Executive Hard Case has that elasticated middle, I guess its a snug fit? only worry is it would catch/scratch rear case?
At the moment still looking for a case but think I may just leave it with out. Keep screen protector fitted and then when the rear case can always be replaced if it gets damaged.
I had a Zagg kit once and know a lot of people who swear by them but they always end up pealing on the edge and look hideous when they do
Hopefully some decent cases or replacement covers will come out soon.
*it's back up to £14 on Amazon so you didn't do to bad Mozza2k11
Click to expand...
Click to collapse
Yes it is a snug fit, no movement (prob cause it was made for the phone ). And as far as catching/scratching the back when removing/inserting the play. I have had mine in and out of the case about 30+ times and no scratches or any visable marks. The case is lined with a velvet lining to prevent such things. I took a pic see below.
I was looking for a clip on case but due to the the slide motion i think the best kinda clip on case would be the zagg. I mainly want the zagg for the back cover for better grip since i already have 2 screen protectors on lol.
hmmm it seems your right, probably was cheaper but cost more for postage so they got the £15ish in the end But £15 instead of £25, bargain (looks cool too ). Would recommend to anyone.
I hate the look of cases on new shiny devices.
I just stick to my motto.
"Don't ****ing drop it! "
There's some designed hard cases on Ebay if you take a look. For the UK it will be under the international sellers section.
So... Today I didn't stick to my motto :0
No damage done though, quite a sturdy little thing. Was expecting the back to fly off at the very least but all held together well.
Oh, and this was on to concrete floor from about 3 feet !
I fitted a zagg full shield for now, all looking good apart from maybe 2 bits of dust trapped on the screen
as for the case, i have seen some hard shell cases on eBay, 3 different colors
Type SHELL CASE FOR SONY ERICSSON XPERIA PLAY to find them.
I'm wanting a leather case with the screw on clip at the back, as i use them to attach phones to my motorbike for the sat nav,
but I'm still unable to find one that will fit the play, my old desire cover is of course too thin
if anyone has seen any please let me know.
http://cgi.ebay.com/Black-Slim-Hard...?pt=US_Tablet_Accessories&hash=item48401f908d
I bought one of these.... it works great! Extremely happy with that purchase and for the price you can't beat it.
I'm going to buy another one to mod and superglue some grippy pads on the back for gaming.
something like this
http://www.amazon.com/Incipio-dermaSHOT-Silicone-iPhone-Classic/dp/B002HMC1NS/ref=pd_sim_cps_21
Thanks for the tip! Ordered one. Can you tell how long shipping took?
Do anyone know where I can purchase replacement covers for the top and bottom covers for the Xperia Ion? I've been looking over on eBay and Google but I am unable to find any. I do not want the complete housing, just the top and bottom covers.
Just picked up a DK39 at the Sony centre in Newcastle. Hoping it will work for a Z1 phone as well, but seeing as they sell the DK31 for that, I wouldn't be surprised if it didn't
Edit...
Works with the Z1 if there's no case on it, no surprise there then.
Newcastle DE?
Sent From The -Mobile Sony Xperia Z1s
fatannasty said:
Newcastle DE?
Sent From The -Mobile Sony Xperia Z1s
Click to expand...
Click to collapse
North east England
Sent from my SGP512 using Tapatalk
HarpingOn said:
Just picked up a DK39 at the Sony centre in Newcastle. Hoping it will work for a Z1 phone as well, but seeing as they sell the DK31 for that, I wouldn't be surprised if it didn't
Edit...
Works with the Z1 if there's no case on it, no surprise there then.
Click to expand...
Click to collapse
Ah, thanks for the heads up. I was going to pick one up today, but I've got a bumper case on my Z1. I'll just stick to the DK31 instead then.
Does the DK39 work, or have an adapter that works, with the Z2 Tablet encased in a thin TPU case (with cutouts for the charging pins)?
All bumpers that i find are metal, which means that are bulky and need screws to fit...
When i used to own a iphone 4 , i had a plastic ultra thin bumper that would not add any extra size...it was about 0.3mm
Is there something like that for Z1?
Sent from my iPad using Tapatalk
yeah, i was looking for that too. so far, i found this one:
http://www.benl.ebay.be/itm/For-Son...hone_PDA_Cases&var&hash=item258676dac5&_uhb=1
i ordered this one, still waiting for it to arrive. there isn't a hole for the magnetic pins so that sucks. i might make a hole in it.
besides this one, there aren't good bumpers for this phone..
I had one of those bumpers in picture, it was terrible and did not hold on the phone at all. Hopefully they already found a way how to improve them.
I am using one called x-doria
Its japanese brand
http://knowyourxperia.files.wordpress.com/2013/02/screen-shot-2013-02-22-at-pm-06-32-53.png
kennethlam said:
I am using one called x-doria
Its japanese brand
http://knowyourxperia.files.wordpress.com/2013/02/screen-shot-2013-02-22-at-pm-06-32-53.png
Click to expand...
Click to collapse
where did you bought it from? there is an xperia z in the picture, is there also a xperia z1 variant?
ikkeeuu said:
where did you bought it from? there is an xperia z in the picture, is there also a xperia z1 variant?
Click to expand...
Click to collapse
I bought it at a local store in hk..
Search it on taobao, ebay... etc.
Has anyone changed their XPERIA ACRO S battery?
Does waterproofing void after changing battery?
Can anyone suggest me a seller that ships worldwide?
I dont think it voids after opening it up..... All the screws have rubber seals and around the frame has a rubber seal right around it.. no glue
I opened my gf's acro s already but we havent tried the waterproof ability yet.