Hello,
I have special SIM card issued by my operator which enables mobile ID use (with sPIN authentication) for connecting to bank or e-government. Works like this:
1. The user clicks the "Log in with mobile ID" option on a supported website
2. The phone displays a screen indicating that a connection is being made
3. The user is prompted to enter a mobile ID sPIN code into the phone
4. The screen on the phone disappears and the website is automatically reloaded with a logged in screen
It worked fine with stock firmware, but after I've rooted my HOX I'm not getting sPIN request screen anymore (step 3).
Have tried several custom AOSP or AOKP ROMs without luck, but found some of them partly working.
One I'm using right now is [ROM][4.2.2] Slim Bean - Endeavoru [STABLE][Build 7]. Mobile ID worked for first days after flashing it but later I was only able to use it for a few random times (after restarts). Then it works till next restart...
I was first thinking its an issue of incompatible apps I've installed or system settings I've mixed up, but somehow it works sometimes after restart (with very low success rate though). Also tried to restart into safe mode - it worked for the first time, but no luck for the next ~20 safe mode restarts after that.
I've also found hints it could be stk (SIM Application Toolkit) related problem. I can see SIM toolkit in my app list, though it doesnt' show up on running processes on developer tools.
If you're still reading this and have any ideas, please make some comments, maybe it would help me to get back on the right track, thanks!
Related
I've tried several times to install android on my AT&T tilt with varying success. I have gotten a few mods to run now but they all seem to have the same problems so I think I'm either missing a step somewhere or not setting things up correctly. I can navigate within Android but can't use the phone functions. It shows a signal on the meter but seems to hand on dialing and when I try to hand up stays on the "hanging up" screen and the phone icon stays in the upper left corner of the screen. Also it hangs when I try to import contacts from SIM card when trying to access card.
Installed to SD card
radio version 1.65.21.18
builds - various but latest is VaniljEclair_RLS10b
info from within Android
network - Cingular
signal strength -101dBm 6asu
mobile network type UMTS
service state in service
mobile network state connecting
kernel version 2.6.25-01130-g99a3b07-dirty
mod version cyanogenmod-5.0.8-d5-ve-rls10b
build number epe54b
Any help is greatly appreciated.
I'm using the same build on TyTN II, and I have no issues with it. I have the OS installed to NAND however.
Are you sure that you are using the latest kernel??
I had tried installing that version after others had the phone issue since it included all files in one zip.
I finally removed the battery and after a reboot everything seems to be working now. Guess I should have done that instead of just a reset...
Hey guys!
So as the topic says Chrome to Phone doesn't work for me.
Everything is fine on the initial setup, but when I try to send a link or whatever I get the "Sent to phone" message... and nothing happens.
Specs in signature.
same for me...works with another gmail account on my phone but not my main one.
Nobody seems to know a fix so ive sacked it off now and use LinkPush instead.
I had a similar issue with it a week or two back. I just removed it all, clean boots each time and reinstalled it manually from the APK rather than the market. Didn't open it, rebooted and then proceeded with the setup after being logged in on the PC. Oddly, it works fine ever since.
-----------------------------------
- Sent via my HTC Desire -
I had the issue after flashing, wiping or other various changes.
I just cleanly remove it then I get it back from the market.
First, get the chrome extension connected then open your mobile Chrome-to-phone app and login with it.
That made it work for me
i've never had a problem with it - works fine for me - have it signed in at work and a home too
you need to go to chrome to phone - settings -disconnect phone and then follow steps to reconnect
Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Try resetting it back to factory defaults. You can google it easily.
hypnonaut said:
Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Click to expand...
Click to collapse
my friend has the same problem. did you fix the issue? if so how?
I am using the Apex Launcher but I think this is possible with stock launcher as well hopefully it helps someone. This is one way to do a factory reset is:
You will need your MSL TO DO THIS. If you don't know it put the "Factory Mode" shortcut on your home screen then skip down to the 2nd part of this post & install the msl app.
FACTORY RESET:
1) long click on the home screen
2) click on shortcut
3) select Activities
4)Scroll down to "Factory Mode" tap it then select the dropled down one. This will put a Shortcut on the Home Screen.
5) Find the Factory Mode shortcut you just made & tap it to open it.
6) Dial ##786# then on the screen that pops up
7) select "RESET"
8)enter your msl in the box that popped up then select ok then the device will reboot & when it powers backup it will be like it was from the factory & if you don't know your MSL follow the instructions below.
TO GET MSL:
1) In a browser type bit.ly/mslutility - can sideload if needed
2)install app
3) Open app & click get MSL it will most likely fail this is fine.
4) click on the factory mode shortcut you made to open it
5) dial ##3282# & put in 6 zeros-it will tell you that it's incorrect this is fine. Go back to home screen
6) Open the MSL App & click on Get MSL-this time it should give you your devices 6 digit MSL Code. Write it down. Then do step # 6 above to reset your Device.
This shortcut will allow you to put the Sprint SGT3 into DIAG MODE(##3424#) , get into the ##data#(##3282#) menu, do the factory reset ##RTN# (##786#) & most likely any other Dialer/hidden menu's for this device.
Thanks to the MSL App builder(not sure who it is so let me know please)
Sent from my SGT3 SM-T217S using Tapatalk 4 I Flashed 2 Selectel
What is it trying to update to? 4.2.2?
Levi Woodard
Woodardwoodworks.com
Sent from the XDA premium app.
Hello,
I have a weird problem with my phone. Few days ago I've drained my battery and swapped it to the fresh one. But after phone booted up everything is broken.
My wallpaper changed to the one i don't know, it even doesn't look like stock one (Screenshot 1).
Notifications doesn't show up. Probably because upper drawer doesn't work now as well (i can slide it down only once, to show me date. But can't slide it down further to change sound profile, wi-fi etc. Screenshot 2).
Home button doesn't work, square button (the one for switching between applications) doesn't work either.
Half of the settings got reset to factory, some of them stayed unchanged but doesn't work anymore. For example, I've had my lock screen protected by pin. It still shows in the settings that I've set pin code, but there is no actual pin lock when I'm locking my phone (Screenshot 3).
Developer options menu says that they "are not available for this user" (Screenshot 4).
Even my QuickCircle case doesn't work anymore.
I have F400L one with Fulmics ROM 7.6 (6.0 Android).
I've tried to dirty flash it (i was on Fulmics 7.5 before). But after flashing new version of ROM everything still the same.
I've tried to wipe Dalvik + Cache, no luck either.
I don't want to do a full wipe, it will be a huge pain it the ass to reinstall and reconfigure all of my apps. Especially ones like Google Authenticator.
Dear community, do you have any suggestions what happened and how i may fix it?
UPDATE:
Found same problem: https://plus.google.com/u/0/+PaulOBrien/posts/8EGNvpY9jQa
Solution is to type this command (through adb or terminal):
am start -n com.google.android.setupwizard/.SetupWizardTestActivity
At this moment, this command resolved probably all of issues occured.
Hi,
I'm facing serious problem with freeze and reboot frequently :crying:
My Gemini PDA is Japanese keyboard layout and 4G+WiFi type.
I tried to do following action for checking what root cause is.
- I removed microSD card and SIM card
- I rebooted by manual and connect to WiFi network.
But nothing was changed.
I also tried a soft reset from "backup and reset" -> "data reset" in Android OS settings but nothing was improved.
Does anyone have similar or same problem like me?
One more thing:
Planet Computer support suggested me full factory reset.
But I could not find how to do it. I tried it by pressing both ESC(power) button and side button simultaneously
but there is no available command like full reset.
Any suggestion or information is welcome!
Best regards
Akira
additional info.
I tried to find when freeze problem happens as following.
1) Input method conflict
1st time, I installed Google Japanese language input and activate both Google's and Gemini keyboard input. This may make conflicts and freeze problem was happened.
I disabled Gemini keyboard input and leave Google's input as active.
It looked reducing the error rate but not fixed yet.
2) Evernote app
When evernote app syncs with cloud 1st time, freeze problem happened. This happens only once.
3) Playing movie file from google photo app
Some times happens.
4) initial setting up
So I did reset of my data and apps on Android OS.
But reboot problem might be getting worse.
Inputting my google account like "[email protected]" but frozen and reboot happened before inputting "@" character.
I tried to find root cause by removing SIM card but the problem happened again.
I asked my Japanese Gemini users if they are facing similar problem but no one faced the problem.
reflashing image but nothing changed
Hi,
I got suggestion from Planet Computer's support team that flashing image might fix the problem.
I tried it but nothing was improved.
I already sent the result to team. I hope they will pick my pda up then replace it.
---
By the way, it does not need install flash tool driver if you use Windows10.
Just launching Flash tool works without installation of the driver.