SecSetupWizard stopped - 4.1.2 for ace 2 - i8160 - Galaxy Ace II Q&A, Help & Troubleshooting

Good afternoon. I need help, URGENT!
What happens, that recently got an ACE 2 I8160 Advantage and how it was decided to perform the ROM 2.3.6 update to the ROM with CSC latest 4.1.2.
Update to restart the first time (when you enter the recovery mode to format the cell) appeared the following error message:
Restarted manually and when you perform the initial settings of the Samsung, I get an alert with the following error:
The process com.google.process.gapps has stopped
Clicking Ok and proceed with the setup, but once you get to the last step I get the following error:
The SecSetupWizard stopped.
I click OK again, but this time returns the option to choose the language, making it impossible to access the cell.
Performed the downgrade to 2.3.6 it starts, it works normally, have the IMEI BACKUP, but I can not restore, need a form, a script to format the phone completely, even if you delete the IMEI.
Nor is it possible to install any CUSTOM ROM. Only this version that comes with the file. PIT, CSC and CODE.
Does anyone have a light, guidance?!
I look back.

try wipe dalvic cache or format data
Sent from my GT-I8160 using xda premium

this broblem of basband modem xxxx

help
amro habib said:
this broblem of basband modem xxxx
Click to expand...
Click to collapse
please i have the same problem with i8160. please help me brother

Saya juga punya masalah yang sama dengan samsung j2 2016

Related

[Q] Galaxy Ace II i8160, startup error always with all new roms

Hello and happy new year ,
Οver three months I try to flash my mobile and always writes me the same error "unfortunately, samsung setupwizard has stopped" . Τhe device always hangs at the point where I choose system language on screen. To be able to work on my device should I have make it "flash" with version of android 2.3.6. Ι have tried to do "flash" with roms too, "pac-rom android 4.2.2" and "10.2 cyanogenmod", and always my device hangs at the point of the loading logo. I've done "flash" with these roms , as stated above, in my friend's phones ,same as mine, and has been correctly installed. The devices are not stuck like mine and working properly. Why my device is not working properly as the other? I am disappointed . I would like to help me :crying:
****I have move this post to the right spot in the forum, ie there ¨ Galaxy Ace II Q&A, Help & Troubleshooting ¨. Please enter an administrator here to delete it and I apologize for my carelessness
You first must flash official jb 4.1.2.
Sent from my GT-I8160 using Tapatalk
... and be sure that you flash correct gapps.
Sent from my GT-I8160 using Tapatalk
tomgv said:
You first must flash official jb 4.1.2.
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
I have done what you say, my friend. When I "flash" the original version 4.1.2 and start my device by choosing the language system writes me the same message "unfortunately, samsung setupwizard has stopped" and hangs there
And something where I forgot to say, without knowing if this is an important point, is that the baseband version is xxxx , not as friend forbidden8 where he says i8160OXXMG2
Flash it with stock jb firmware and then go to Settings > Backup and reset > Factory data reset > scroll down and pick Format USB storage > then Reset device.
Format USB storage in case there's a malware in your phone.
riadn said:
Flash it with stock jb firmware and then go to Settings > Backup and reset > Factory data reset > scroll down and pick Format USB storage > then Reset device.
Format USB storage in case there's a malware in your phone.
Click to expand...
Click to collapse
LOL are you sure???? First time i'm listening something like this. Actually the "swap.apk" made my device to working wrong , I have break the correct addresses to "read" and "save" from my device, I think
Yea Try it but copy your data if you want them
riadn said:
Yea Try it but copy your data if you want them
Click to expand...
Click to collapse
I've done twenty times format my device, so I have nothing any-more stored inside. I will try it thank you.
did you flash stock/original jb from odin?
Use the latest firmware xxna1
Sent from my GT-I8160 using xda premium
Samsung service replace my phone's board. Thanks everyone for your advice.

no IMEI and not able to root

i have the galaxy grand duos i9082, with no imei number, it gives 000000000000../1
i tried to root the phone,to recover my imei, by installing CMW recovery by odin, but no custom recovery !! the official recovery still working.
and i noticed a strange red notification in download mode, i will put a screen-shot for that.
so any help please !
edit: root and recovery issue has been solved
Issa Eid said:
i have the galaxy grand duos i9082, with no imei number, it gives 000000000000../1
i tried to root the phone,to recover my imei, by installing CMW recovery by odin, but no custom recovery !! the official recovery still working.
and i noticed a strange red notification in download mode, i will put a screen-shot for that.
so any help please !
Click to expand...
Click to collapse
How that happened? How you lost your IMEI? Do you have an EFS backup of IMEI? Have you tried rooting or installing any custom ROM?
DMJoh said:
How that happened? How you lost your IMEI? Do you have an EFS backup of IMEI? Have you tried rooting or installing any custom ROM?
Click to expand...
Click to collapse
actually my friend gave me that phone to fix it! i don't know what happened!
but i noticed that in efs folder there is no file like (nv_data , nv_core ...etc), all files are deleted despite folders like (wifi, imei,carreir...etc)
Issa Eid said:
i have the galaxy grand duos i9082, with no imei number, it gives 000000000000../1
i tried to root the phone,to recover my imei, by installing CMW recovery by odin, but no custom recovery !! the official recovery still working.
and i noticed a strange red notification in download mode, i will put a screen-shot for that.
so any help please !
edit: root and recovery issue has been solved
Click to expand...
Click to collapse
The notification is present in all recent firmwares released by Samsung.
In one of the threads, a user mentioned downgrading/reflashing the firmware brought the IMEI back somehow.
Try this, downgrade to November 4.2.2 firmware (more stable and no red notification on download mode), clear cache from stock recovery. Check if you have your IMEI back, if not then you'll have to clean root traces and take it in to the service center to fix the EFS partition.
Issa Eid said:
i have the galaxy grand duos i9082, with no imei number, it gives 000000000000../1
i tried to root the phone,to recover my imei, by installing CMW recovery by odin, but no custom recovery !! the official recovery still working.
and i noticed a strange red notification in download mode, i will put a screen-shot for that.
so any help please !
edit: root and recovery issue has been solved
Click to expand...
Click to collapse
That notification is not strange, it shows the firmware version of the Samsung eMMC (The e•MMC architecture puts the MMC components (flash memory plus controller) into a small ball grid array (BGA) package for use in circuit boards as an embedded non-volatile memory system).
That came up with the latest update, if EFS partition is not backed up, you may have to approach Service centre i guess!
iceyhotguy said:
The notification is present in all recent firmwares released by Samsung.
In one of the threads, a user mentioned downgrading/reflashing the firmware brought the IMEI back somehow.
Try this, downgrade to November 4.2.2 firmware (more stable and no red notification on download mode), clear cache from stock recovery. Check if you have your IMEI back, if not then you'll have to clean root traces and take it in to the service center to fix the EFS partition.
Click to expand...
Click to collapse
the phone now has 4.2.2 firmware, what i know for sure that it was working normaly in one day and the next day something goes wrong, but i couldn't identify the main cause.
anw i will try to reflash that firmware maybe i will help
can i have a link for the right firmware.
Issa Eid said:
the phone now has 4.2.2 firmware, what i know for sure that it was working normaly in one day and the next day something goes wrong, but i couldn't identify the main cause.
anw i will try to reflash that firmware maybe i will help
can i have a link for the right firmware.
Click to expand...
Click to collapse
this is the link to INU (India) K3 I mentioned above - http://samsung-updates.com/details/16513/Galaxy_Grand_Duos/GT-I9082/INU/I9082XXUBMK3.html
All other firmware can be found here - http://samsung-updates.com/device/?id=GT-I9082
Choose whichever is your region specific, preferably choose one with november 2013 build date not 2014.

[Q] N910A>Lollipop 5.0.1> Manual Update> "NO FIRMWARE"

I have an AT&T SM-N910A Note 4, currently on Lollipop 5.0.1. It is permanent unlocked via CODE and I'm using it outside the US with a foreign SIM with no problems.
Last April 14 ATT released a firmware update (OTA) to 5.0.1 with new:
Baseband Version: N910AUCU1COC4
Kernel Version: [email protected]#1
Build Number: LRX22C.N910AUCU1COC4
When i try to get that update via ">Settings>General>About Device> Software Updates"... it does NOTHING. Just display a text saying "No Firmware".
To me it seems I'm being ruled out from updates....
Does anyone knows why is this? Do I need to be a current AT&T customer to have updates?
IS THERE ANY PLACE TO FIND THE LATEST 5.0.1 FIRMWARE files to update from ODIN??
Thank you guys for your help!!
jomeza001 said:
I have an AT&T SM-N910A Note 4, currently on Lollipop 5.0.1. It is permanent unlocked via CODE and I'm using it outside the US with a foreign SIM with no problems.
NOW... when I Try to manually update to 5.0.2 via ">Settings>General>About Device> Software Updates"... it does NOTHING. Just display a text saying "No Firmware".
To me it seems I'm being ruled out from updates....
Does anyone knows why is this? Do I need to be a current AT&T customer to have updates?
IS THERE ANY PLACE TO FIND THE 5.0.2 FIRMWARE files to update from ODIN??
Thank you guys for your help!!
Click to expand...
Click to collapse
There is no 5.0.2 as far as I know
jomeza001 said:
I have an AT&T SM-N910A Note 4, currently on Lollipop 5.0.1. It is permanent unlocked via CODE and I'm using it outside the US with a foreign SIM with no problems.
NOW... when I Try to manually update to 5.0.2 via ">Settings>General>About Device> Software Updates"... it does NOTHING. Just display a text saying "No Firmware".
To me it seems I'm being ruled out from updates....
Does anyone knows why is this? Do I need to be a current AT&T customer to have updates?
IS THERE ANY PLACE TO FIND THE 5.0.2 FIRMWARE files to update from ODIN??
Thank you guys for your help!!
Click to expand...
Click to collapse
Happened to me too on the initial Lollipop update. Basically, the update was downloading, but would fail at install. Eventually, I got the "No Firmware" toast every time I tried to check for updates.
I had to go to Best Buy and they reflashed Kitkat (Because they didn't have the update yet). After that, the update check worked again and the update installed.
And as just stated, there is no 5.0.2 update. Only 2x 5.0.1 updates. First update was the Lollipop OS. The second was just a patch to correct some things.
spexwood said:
Happened to me too on the initial Lollipop update. Basically, the update was downloading, but would fail at install. Eventually, I got the "No Firmware" toast every time I tried to check for updates.
I had to go to Best Buy and they reflashed Kitkat (Because they didn't have the update yet). After that, the update check worked again and the update installed.
And as just stated, there is no 5.0.2 update. Only 2x 5.0.1 updates. First update was the Lollipop OS. The second was just a patch to correct some things.
Click to expand...
Click to collapse
Yes I did read your post man. I would really love to NOT do a factory reset... Thanks for your reply.
stevenj05 said:
There is no 5.0.2 as far as I know
Click to expand...
Click to collapse
You're right. I edited my post. Thanks!
jomeza001 said:
Yes i read your post man. I would really love to NOT do a factory reset... Thanks for your reply.
You're right. I edited my post. Thanks!
Click to expand...
Click to collapse
It wasn't a factory reset. It was a reflash. I didn't lose any of my files, apps, or settings. It was like updating via OTA, except the Best Buy guy did it via USB and the update was the same exact firmware version that I already had.
I'm not even sure if Best Buy is an option for you, but using Odin to reflash the latest Kitkat firmware should do the same thing. I say this because I've done it on my Samsung tablet and I don't lose apps, settings or data. I do lose root though (easy to regain), but that won't matter with the n910a anyways.
Edit:
Using the firmware repair option in Kies may work too, but not 100% sure if it'll retain your data since I've never tried this before.
spexwood said:
It wasn't a factory reset. It was a reflash. I didn't lose any of my files, apps, or settings. It was like updating via OTA, except the Best Buy guy did it via USB and the update was the same exact firmware version that I already had.
I'm not even sure if Best Buy is an option for you, but using Odin to reflash the latest Kitkat firmware should do the same thing. I say this because I've done it on my Samsung tablet and I don't lose apps, settings or data. I do lose root though (easy to regain), but that won't matter with the n910a anyways.
Edit:
Using the firmware repair option in Kies may work too, but not 100% sure if it'll retain your data since I've never tried this before.
Click to expand...
Click to collapse
Just tried it but there is a warning about loosing all data if performing that.
Best Buy is not an option for me.
Unfortunately, flashing the update via Odin is your only option at this time. You will not be able to upgrade firmware via OTA, if not on an ATT network. There are apps that will allow you to backup and restore your call history and text messages without root. You can try copying your android data to your external storage card and copying the files back to the device after the firmware has been flashed.
bigron77 said:
Unfortunately, flashing the update via Odin is your only option at this time. You will not be able to upgrade firmware via OTA, if not on an ATT network. There are apps that will allow you to backup and restore your call history and text messages without root. You can try copying your android data to your external storage card and copying the files back to the device after the firmware has been flashed.
Click to expand...
Click to collapse
Good day,
I am with my ATT Note 4 N910A (ATT locked) is in this situation ,pls. see the att. pictures
once the phone reboot doesn't go over 5 update and reboot again every minute doing the same thing.
can I do something via odin? I have already used odin and installed some rom to my old note 2 but with this new note 4 I am lost and I need you :crying:
any suggestion/help?
thanks and have a good day.
thepinkpanter said:
Good day,
I am with my ATT Note 4 N910A (ATT locked) is in this situation ,pls. see the att. pictures
once the phone reboot doesn't go over 5 update and reboot again every minute doing the same thing.
can I do something via odin? I have already used odin and installed some rom to my old note 2 but with this new note 4 I am lost and I need you :crying:
any suggestion/help?
thanks and have a good day.
Click to expand...
Click to collapse
Hey @thepinkpanter, just saw your post.
First, if you haven't already, remove the battery, boot into recovery mode and do a factory data reset, then reboot.
If you already tried that, then I would try flashing back to KK (NIE or NK3) both files can be found in the General Thread for the ATT N4. Use can use ODIN ver 3.0.7, 3.0.9 or 3.10.6, just follow the instructions for the specific ver you choose.
Let me know if you need further assistance..
bigron77 said:
Hey @thepinkpanter, just saw your post.
First, if you haven't already, remove the battery, boot into recovery mode and do a factory data reset, then reboot.
If you already tried that, then I would try flashing back to KK (NIE or NK3) both files can be found in the General Thread for the ATT N4. Use can use ODIN ver 3.0.7, 3.0.9 or 3.10.6, just follow the instructions for the specific ver you choose.
Let me know if you need further assistance..
Click to expand...
Click to collapse
I have already one the factory data reset......so i'll try flashing back to KK (NIE or NK3) and let you know
thanks again
bigron77 said:
Hey @thepinkpanter, just saw your post.
First, if you haven't already, remove the battery, boot into recovery mode and do a factory data reset, then reboot.
If you already tried that, then I would try flashing back to KK (NIE or NK3) both files can be found in the General Thread for the ATT N4. Use can use ODIN ver 3.0.7, 3.0.9 or 3.10.6, just follow the instructions for the specific ver you choose.
Let me know if you need further assistance..
Click to expand...
Click to collapse
as you can see from the att. pictures in my previous help request I have the LRX22C.N910AUCU1COC4 5.0.1 , yesterday I reflashed the N910AUCU1COC4 just in case ......and nothing happened then I checked what is on the outer box lable and the version of my unit is N910AUCU1ANIE same version you suggested me to flash,
but at this point my question is can I flash to the N910AUCU1ANIE over the N910AUCU1COC4 ??????
thanks again
thepinkpanter said:
as you can see from the att. pictures in my previous help request I have the LRX22C.N910AUCU1COC4 5.0.1 , yesterday I reflashed the N910AUCU1COC4 just in case ......and nothing happened then I checked what is on the outer box lable and the version of my unit is N910AUCU1ANIE same version you suggested me to flash,
but at this point my question is can I flash to the N910AUCU1ANIE over the N910AUCU1COC4 ??????
thanks again
Click to expand...
Click to collapse
Hey @thepinkpanter
You can flash NIE over OC4. I have done so a few times myself. Currently I'm using NK3.
It looks to me like your data partition is not being wiped. If I am remembering correctly, you do not get the android is updating screen on initial boot.
bigron77 said:
Hey @thepinkpanter
You can flash NIE over OC4. I have done so a few times myself. Currently I'm using NK3.
It looks to me like your data partition is not being wiped. If I am remembering correctly, you do not get the android is updating screen on initial boot.
Click to expand...
Click to collapse
I did try everything.....I also did wipe the data partition just after factory recovery ........
and the system once reboot start the android upgrading and the optimizing stop almost every time to 6 or 10 to 48 ..........
as soon I am back home i'll download the NIE from this forum http://forum.xda-developers.com/note-4-att/general/stock-to-stock-odin-flashable-tested-t2915915
thanks again for your kind help
thepinkpanter said:
I did try everything.....I also did wipe the data partition just after factory recovery ........
and the system once reboot start the android upgrading and the optimizing stop almost every time to 6 or 10 to 48 ..........
as soon I am back home i'll download the NIE from this forum http://forum.xda-developers.com/note-4-att/general/stock-to-stock-odin-flashable-tested-t2915915
thanks again for your kind help
Click to expand...
Click to collapse
@thepinkpanther
I would suggest selecting Nand Erase All, F. Reset Time, along with Auto Reboot in Odin on your next attempt. This will erase all of your partitions (system, data, etc) prior to flashing the ROM files. Unfortunately, this will erase all of the data on your internal storage card, but I believe this will fix the problem you're experiencing.
Do not select Re-Partition or EFS Clear, this will wipe your phones IMEl.
bigron77 said:
@thepinkpanther
I would suggest selecting Nand Erase All, F. Reset Time, along with Auto Reboot in Odin on your next attempt. This will erase all of your partitions (system, data, etc) prior to flashing the ROM files. Unfortunately, this will erase all of the data on your internal storage card, but I believe this will fix the problem you're experiencing.
Do not select Re-Partition or EFS Clear, this will wipe your phones IMEl.
Click to expand...
Click to collapse
So maybe by selecting Nand I could also try first with the actual N910AUCU1COC4 ?????
thanks again
thepinkpanter said:
So maybe by selecting Nand I could also try first with the actual N910AUCU1COC4 ?????
thanks again
Click to expand...
Click to collapse
Yes, that should completely remove the current firmware prior to flashing.
Samsung Galaxy Note 4 AT&T 5.0.1 Baseband gone auto and continuously restart now Help
Samsung Galaxy Note 4 AT&T 5.0.1 Baseband Unknown auto and continuously restarting now....
History of this phone is,... :
01. Customer came for Unlock Note 4 SM-N910A 5.0.1 N910AUCU1COC4 Baseband.
02. First I was put into recovery mode and " Enable CP logging " then restart phone.
03. Second reboot normal mode, I dial *#0808# and Select " DM+Modem+ADB ".
04. thirdly I dialed *#9090# and Select first option " DM/DUN over USB " ( and after selected then auto restart mobile , and when power on then about 10-15 Second it restart auto again and again same. Then I checked Settings> "Baseband" I saw show "Unknown" and IMEI " null/null ".
05. Then I do Factory Reset then mobile and then it show " Android is upgrading... Optimizing app 6 of 48. " Then Restart again.... Continuous ....
06. I downloaded N910AUCU1COC2 Firmware BL,AP,CP,CSC_ATT file and Flash with Odin by Ticked, " Nand Erase All " F.Reset Time and Auto Reboot.
07. But Still Same " Android is Upgrading.... " restart...
Help Need for solve this problem please...
Problem Solved
http://forum.gsmhosting.com/vbb/f68...ting-problem-5-0-1-coc4-1973984/#post11194760

Zenfone "ZE500CL" Imei and Baseband Unknown after replacing Touch+Glass

Hello to all, have one Z00D (ZE500CL), that after replace the Touch+Glass goes alone in Update, impossible Stop the process and now i've this Asus w/o Imei and Baseband, in Recovery mode i can see IMEI: 12345678ABCDEF
In Normal mode phone show V.5.0.1 had first the SKU : UL-ASUS_Z00D-WW-12.6.5.108-user.zip
Have flashed last version i've find: UL-ASUS_Z00D-WW-12.16.5.118-user.zip but always Imei and Baseband Unknown.
Now i've Rotted this phone, there's anybody can help me to restore IMEI and BB?
BR
Vanito
Ignore what is displays in recovery, just reflash ROM and reboot the phone. Then check in settings once phone setup is complete. Your bandbase and imei should be there.
shawnchalfant said:
Ignore what is displays in recovery, just reflash ROM and reboot the phone. Then check in settings once phone setup is complete. Your bandbase and imei should be there.
Click to expand...
Click to collapse
You think i not have tryed many times with this solution?
I've Root phone now and scanned all Partition for Erase and later write back, but Fault "Baseband" , (modem), partition, for sure is been erased from a lol ...
so i can repair Imei only if have one DUMP of this same phone
or with "Backup&restore" App from google play, bkp of modem(radio)
partition or of the name of this partition with modem1, 2 and 3... if anyone can help is great
BR
You have to live with your mistake. Move on.
shawnchalfant said:
You have to live with your mistake. Move on.
Click to expand...
Click to collapse
Ok see you live w/o mistake, what's ROM should flash other time?
Read my Rom flashed above and still Not solved......
i'm open to any try but not for sametings done, suggest one solutio Not tested..if you have please...ROM: ??????

Help: unlockable / no signal Galaxy fame lite

Dear friends,
I have a Samsung galaxy fame lite GT-S6790L, android 4.1.2 Jellybean, wich is network locked.
- First I rooted it with king-root, then I have installed 'Regionlock away' on it, didnt help for unlocking, and the phone shows "Not registered on network" when calling, or it is impossible to register on any network at all.
Later the phone was flashed with a Stock ROM without carrier logos.
Then, I waited for the subsidy code from my carrier, wich I have now.
Problem is:
- now, when I insert a SIM card from a diferent carrier, the SIMLOCK menu doesn't prompt (wich actually was prompting before I messed things up).
- the codes for bringing the simlock menu up, do not seem to work, in fact when I dial the codes nothing happens (the phone doesn`t react at the codes);
- what i have tried so far, and nothing happens:
*#7465625#
#7465625#
*#7465625*638*#
#7465625*638*#
*#7465625*638*{CODE}# ; also tried variants that I found for Jellybean *#7465625638#,
*#197328640#
*#0011# , brings a service mode menu, but it is unlockable, I have tried "menu + Back"; "menu Key Input + 1" (also Q, and 0000). Nothing seems to help.
*#06# do gives me the IMEI number, wich is correct according to that one labeled on the back of the phone.
The phone was also flashed with Odin with the Stock Rom of the original carrier, and it didnt help either.
I've exhausted all my possibilities as a rookie.
What I am missing? is there a solution?
Thanks in advance
anybody ?
please?
im still stuck with my phone
Flash firmware?
Sent from my MI 4i using Tapatalk
faizauthar12 said:
Flash firmware?
Sent from my MI 4i using Tapatalk
Click to expand...
Click to collapse
Hi faizauthar12, thanks for the reply, but I do not quite understand what your asking me, so I will answer by guess.
I flashed this firmware using Odin 3 (without messing with the options, and only did the full wipes with the stock recovery before and after flashing the PDA file S6790LUBAMK2_S6790LUUBAMK1_S6790LUBAMK2__HOME.tar.md5)
Stock firmware info:
Device-----------------------/--Model-------/--Region---/- Version-------------/--OS-----/--Build-------/--Changelist
Galaxy Fame Lite (Latin)--/--GT-S6790L--/--ARO------/--S6790LUBAMK2--/--4.1.2----/--25.11.2013--/--1476588
Also I flashed others from different regions than ARO.
If you are telling me to use another procedure called "flash firmware" that I have confused with the Odin procedure.... Im in the dark, and got to say that I do not have the knowledge.
pabloqrodez said:
Hi faizauthar12, thanks for the reply, but I do not quite understand what your asking me, so I will answer by guess.
I flashed this firmware using Odin 3 (without messing with the options, and only did the full wipes with the stock recovery before and after flashing the PDA file S6790LUBAMK2_S6790LUUBAMK1_S6790LUBAMK2__HOME.tar.md5)
Stock firmware info:
Device-----------------------/--Model-------/--Region---/- Version-------------/--OS-----/--Build-------/--Changelist
Galaxy Fame Lite (Latin)--/--GT-S6790L--/--ARO------/--S6790LUBAMK2--/--4.1.2----/--25.11.2013--/--1476588
Also I flashed others from different regions than ARO.
If you are telling me to use another procedure called "flash firmware" that I have confused with the Odin procedure.... Im in the dark, and got to say that I do not have the knowledge.
Click to expand...
Click to collapse
Yep
It's called flash firmware
First make sure the firmware it's for ur region,or follow where ur phone made (behind the battery,u need to pulled out the battery)
Adter that ,try to use nand erase all,it will erase everyting at ur phone ,so make a backup
If u got bootloop ,go to recovery ,wipe data ..
Good luck ,inform me again
faizauthar12 said:
Yep
It's called flash firmware
First make sure the firmware it's for ur region,or follow where ur phone made (behind the battery,u need to pulled out the battery)
Adter that ,try to use nand erase all,it will erase everyting at ur phone ,so make a backup
If u got bootloop ,go to recovery ,wipe data ..
Good luck ,inform me again
Click to expand...
Click to collapse
Hi faizauthar12,
sorry for the delay, I managed to make a backup after installing the CWM.
Later I have flashed the firmware with the Nand erase all option activated, it Pass OK, got the bootloop fixed,
but it didnt fix the problem of the simlocks and the secret menus.
It is so strange cause the Nand erase all should erase all indeed.
I put the Sim card to verify and the phone gets signal and receive empty info messages of all the operators and even receive messages without a Simcard in it (I dont know why because I did not tried to register in any of them yet),
Also, when i try to make a call, it says "not registered in network". Tried to register in the network but phone never does it, and fails.
can i do anything else before quit?
Thanks for your help
anybody with any suggestions?
a Quick update,
I took the cellphone to a service, they flashed it with a box, and all.
It didn't make any difference, the phone does not register in the network, and stays in "no service".
thanks anyway guys.
pabloqrodez said:
a Quick update,
I took the cellphone to a service, they flashed it with a box, and all.
It didn't make any difference, the phone does not register in the network, and stays in "no service".
thanks anyway guys.
Click to expand...
Click to collapse
:/

Categories

Resources