Develop Bugs

[SOLVED] Need help getting s-ON

whats up guys, so i decided to unroot my g2 and i used this method to root it (http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD) i guess i used the gfree method? and i tried doing the Returning to stock method on the same link. so i got to the part where i had to restore the partition 7 i did both methods of trying to restore the partition 7..but it resulted with error opening copied file..but i synced it anyway, still s-off....i need the s-on....but the phone does seem like its back to its original stock rom...i jsut need to have it s-on...any idea on how to turn it back on???? if i do the ota update would it make it turn back on, or would that just brick my phone?
C:\Users\Blah\Desktop\p>adb shell
# /data/local/tmp/gfree -s on -c T-MOB010
/data/local/tmp/gfree -s on -c T-MOB010
--secu_flag on set
--cid set. CID will be changed to: T-MOB010
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x00015398 (86936)
Section index for section name string table: 41
String table offset: 0x000151df (86495)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x000011cc (4556)
-- size: 0x000000c4 (196)
Kernel release: 2.6.32.17-g814e0a1
New .modinfo section size: 204
Attempting to power cycle eMMC... OK.
Write protect was successfully disabled.
Searching for mmc_blk_issue_rq symbol...
- Address: c02a8d44, type: t, name: mmc_blk_issue_rq, module: N/A
Kernel map base: 0xc02a8000
Kernel memory mapped to 0x40002000
Searching for brq filter...
- Address: 0xc02a8d44 + 0x34c
- 0x2a000012 -> 0xea000012
Backing up current partition 7 and patching it...
Error opening copy file.
#
^---this is what happens when i try to put s-on with gfree way under the Returning to Stock on the wiki page. ( i tried both ways and the i have the same result of it saying "Error opening copy file." if anyone has encountered the same problem or have a solution for this, please it would be great, i need to get my g2 exchanged because the orientation/tilt sensor is busted...
*NVM I GOT IT*

Nvm i got it

Whatever you do, make sure you don't explain how you fixed it. That way, if someone else has the same problem in the future, you don't inadvertently help them.

futuremonkey said:
Whatever you do, make sure you don't explain how you fixed it. That way, if someone else has the same problem in the future, you don't inadvertently help them.
Click to expand...
Click to collapse
Tell it monkey! So sick of people doing that and wanting everyone to help, but then don't say what fixed it so the next person doesn't have to go through hell and back. Very selfish. This is a give and take community guys not just take take take.
Sent from my HTC Vision using XDA Premium App

uhhh, should i explain how i fixed it or what..no one even bothered trying to help me out anyway

YES PLEASE! I'm stuck with the exact same problem and I just can't figure it out.

Need a bit of help

Hey everyone, I'm new here and I finally decided to root my g2. I'm using the cyanogenmod wiki entry. I am at the point where it says to write "./gfree -f -b hboot-eng.img -y recovery.img" though every time I do this it says:
# ./gfree -f -b hboot-eng.img -y recovery.img
./gfree -f -b hboot-eng.img -y recovery.img
--secu_flag off set
--cid set. CID will be changed to: 11111111
--sim_unlock. SIMLOCK will be removed
--hboot set. hboot image hboot-eng.img will be installed in partition 18
--recovery set. recovery image recovery.img will be installed in partition 21
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x000138b4 (80052)
Section index for section name string table: 41
String table offset: 0x000136fb (79611)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x00000a14 (2580)
-- size: 0x000000cc (204)
Kernel release: 2.6.32.17-g814e0a1
New .modinfo section size: 204
Attempting to power cycle eMMC... OK.
Write protect was successfully disabled.
Searching for mmc_blk_issue_rq symbol...
- Address: c02a8d44, type: t, name: mmc_blk_issue_rq, module: N/A
Kernel map base: 0xc02a8000
Kernel memory mapped to 0x40002000
Searching for brq filter...
- Address: 0xc02a8d44 + 0x34c
- ***WARNING***: Found fuzzy match for brq filter, but conditional branch isn't
. (0xea000012)
Backing up current partition 18 and installing specified hboot image...
Backing up partition /dev/block/mmcblk0p18 to /sdcard/part18backup-1313372731.bi
n ...
Writing image hboot-eng.img to partition /dev/block/mmcblk0p18 ...
Error opening input image.
is this normal? if it helps, I continue on to write
./root_psn
sync
and nothing happens. Thanks ahead of time for any help.

Nevermind. I just went through every step again and it worked.

[Q] Bricked G2???

I followed the instructions on the following link to downgrade and root my G2 a day ago.
When I was following the process, this message came up
PHP:
C:\android-sdk\platform-tools>adb shell
# cd /data/local/tmp
cd /data/local/tmp
# ./gfree -f -b hboot-eng.img -y recovery.img
./gfree -f -b hboot-eng.img -y recovery.img
--secu_flag off set
--cid set. CID will be changed to: 11111111
--sim_unlock. SIMLOCK will be removed
--hboot set. hboot image hboot-eng.img will be installed in partition 18
--recovery set. recovery image recovery.img will be installed in partition 21
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x000138b4 (80052)
Section index for section name string table: 41
String table offset: 0x000136fb (79611)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x00000a14 (2580)
-- size: 0x000000cc (204)
Kernel release: 2.6.32.17-g814e0a1
New .modinfo section size: 204
Attempting to power cycle eMMC... OK.
Write protect was successfully disabled.
Searching for mmc_blk_issue_rq symbol...
- Address: c02a8d44, type: t, name: mmc_blk_issue_rq, module: N/A
Kernel map base: 0xc02a8000
Kernel memory mapped to 0x40002000
Searching for brq filter...
- Address: 0xc02a8d44 + 0x34c
- ***WARNING***: Found fuzzy match for brq filter, but conditional branch isn't
. (0xea000012)
Backing up current partition 18 and installing specified hboot image...
md5sum #1 = 1477893d02ff60764d29fce795e75ac3
md5sum #2 = 0297a81509b6da5f102b1cc63893b9ad
Backing up partition /dev/block/mmcblk0p18 to /sdcard/part18backup-1354240611.bi
n ...
Writing image hboot-eng.img to partition /dev/block/mmcblk0p18 ...
md5sum #3 = 1477893d02ff60764d29fce795e75ac3
md5sum #3 == md5sum #1 - the hboot image was not installed!
Probably the power cycle of the eMMC failed. Check the messages above.
You might join the IRC channel #G2Root on Freenode for further help!
and I did not notice this so I just went on with the rest of the process.
Now I cannot turn on the phone or go into recovery. The phone won't charge and the only response I got from the phone is when I plugged a USB cable to my laptop without the phone battery and pressed the two volume buttons together. I get 5 vibrations and a green light after I do that.
Any ideas how to solve this problem? Or have I just hard-bricked my phone? I don't have warranty by the way.

Sorry but you're in the market for a new phone or some JTAG equipment.
Sent from my Nexus 7 using xda premium

g2Noob said:
...and I did not notice this so I just went on with the rest of the process.
Now I cannot turn on the phone or go into recovery. The phone won't charge and the only response I got from the phone is when I plugged a USB cable to my laptop without the phone battery and pressed the two volume buttons together. I get 5 vibrations and a green light after I do that.
Any ideas how to solve this problem? Or have I just hard-bricked my phone? I don't have warranty by the way.
Click to expand...
Click to collapse
Sorry for doublechecking but it's seemed somehow unclear to me. What happends when your phone has battery in it, is inplugged and you try to power on? Absolutely nothing? Do you get any response via ADB when the phone is plugged to the computer. I will be kinda busy today so don't know how much I'll be able to help here, but I would't be so sure that it's bricked, there's hope. Good luck!

bootloader was erased then not flashed = no bootloader
no bootloader = no ability for phone to start in any scenario
not trying to be captin doom, but there is no hope without the ability to boot

sorry to hear that :crying:

g2Noob said:
I followed the instructions on the following link to downgrade and root my G2 a day ago.
When I was following the process, this message came up
PHP:
C:\android-sdk\platform-tools>adb shell
# cd /data/local/tmp
cd /data/local/tmp
# ./gfree -f -b hboot-eng.img -y recovery.img
./gfree -f -b hboot-eng.img -y recovery.img
--secu_flag off set
--cid set. CID will be changed to: 11111111
--sim_unlock. SIMLOCK will be removed
--hboot set. hboot image hboot-eng.img will be installed in partition 18
--recovery set. recovery image recovery.img will be installed in partition 21
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x000138b4 (80052)
Section index for section name string table: 41
String table offset: 0x000136fb (79611)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x00000a14 (2580)
-- size: 0x000000cc (204)
Kernel release: 2.6.32.17-g814e0a1
New .modinfo section size: 204
Attempting to power cycle eMMC... OK.
Write protect was successfully disabled.
Searching for mmc_blk_issue_rq symbol...
- Address: c02a8d44, type: t, name: mmc_blk_issue_rq, module: N/A
Kernel map base: 0xc02a8000
Kernel memory mapped to 0x40002000
Searching for brq filter...
- Address: 0xc02a8d44 + 0x34c
- ***WARNING***: Found fuzzy match for brq filter, but conditional branch isn't
. (0xea000012)
Backing up current partition 18 and installing specified hboot image...
md5sum #1 = 1477893d02ff60764d29fce795e75ac3
md5sum #2 = 0297a81509b6da5f102b1cc63893b9ad
Backing up partition /dev/block/mmcblk0p18 to /sdcard/part18backup-1354240611.bi
n ...
Writing image hboot-eng.img to partition /dev/block/mmcblk0p18 ...
md5sum #3 = 1477893d02ff60764d29fce795e75ac3
md5sum #3 == md5sum #1 - the hboot image was not installed!
Probably the power cycle of the eMMC failed. Check the messages above.
You might join the IRC channel #G2Root on Freenode for further help!
and I did not notice this so I just went on with the rest of the process.
Now I cannot turn on the phone or go into recovery. The phone won't charge and the only response I got from the phone is when I plugged a USB cable to my laptop without the phone battery and pressed the two volume buttons together. I get 5 vibrations and a green light after I do that.
Any ideas how to solve this problem? Or have I just hard-bricked my phone? I don't have warranty by the way.
Click to expand...
Click to collapse
did you finish the downgrade?

ahmedrzvi said:
did you finish the downgrade?
Click to expand...
Click to collapse
Yes I did finish and for clarification I can't turn on the phone no matter what
I can recognize the device when I hold down volume up and down and plug it on the computer
It shows up as qualcomm cdma... I don't know why iot says cdma the phone is gsm and I never flashed a radio
Any help would be appreciated

g2Noob said:
Yes I did finish and for clarification I can't turn on the phone no matter what
I can recognize the device when I hold down volume up and down and plug it on the computer
It shows up as qualcomm cdma... I don't know why iot says cdma the phone is gsm and I never flashed a radio
Any help would be appreciated
Click to expand...
Click to collapse
Even a fully working g2/dz will give the same response in regard to the qualcomm cdma, I have searched a long time trying to find a way to use this mode to flash firmware directly to a phone, I have talked with a many developers who are familiar use this mode with other phones. No one has yet showed me what to do, the best information I get is you need special drivers unique to this model and a special program that only htc has. I assume someone could make another work, but for all the amazing developers who have come across this widley used phone over the years, none have
So again, not trying to be the bearer of bad news but I also don't want you sitting around with false hope so my first post still stands
Sent from my HTC Vision using xda premium

demkantor said:
Even a fully working g2/dz will give the same response in regard to the qualcomm cdma, I have searched a long time trying to find a way to use this mode to flash firmware directly to a phone, I have talked with a many developers who are familiar use this mode with other phones. No one has yet showed me what to do, the best information I get is you need special drivers unique to this model and a special program that only htc has. I assume someone could make another work, but for all the amazing developers who have come across this widley used phone over the years, none have
So again, not trying to be the bearer of bad news but I also don't want you sitting around with false hope so my first post still stands
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Thank you for your reply. I guess I can't do anything about this D: Time to get another phone... >.<

Hey guys I just plugged the G2 back into the computer and now there are sometimes orange lights in the corner that are either solid or just blinking. I don't know why it started doing this but I still can't turn on the phone. I've probably bricked my phone but I just want to make sure that I can't fix this by any means.

My DZ died yesterday, suddenly turned off, i cant power on and my PC do not recognize it only show QHUSB_DLOAD. I think the eMMC died.
There is any whey to repair or i need to change the motherboard?

Press and hold volume down button and track pad and press power...... How offen you used to flash Rom's? And which Rom u were on when your phone died?
Sent from my HTC Desire Z using xda app-developers app

[Q] rooting Desire Z issue

Hi, I'm trying to root my HTC Desire Z in order to put custom ROM on it later, and having some (prolly noob) issue:
Followed the 'ADB for noobs' thread and all ok: http://forum.xda-developers.com/showthread.php?t=865685
Now I'm trying to follow the rooting on this thread: http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
Stuck on step #4:
# cd /data/local/tmp
# ./gfree -f -b hboot-eng.img -y recovery.img
# ./root_psn
# sync
Getting the following:
$ ./gfree -f -b hboot-eng.img -y recovery.img
./gfree -f -b hboot-eng.img -y recovery.img
--secu_flag off set
--cid set. CID will be changed to: 11111111
--sim_unlock. SIMLOCK will be removed
--hboot set. hboot image hboot-eng.img will be installed in partition 18
--recovery set. recovery image recovery.img will be installed in partition 21
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x000138b4 (80052)
Section index for section name string table: 41
String table offset: 0x000136fb (79611)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x00000a14 (2580)
-- size: 0x000000cc (204)
Kernel release: 2.6.35.10-g53a84f9
New .modinfo section size: 204
Attempting to power cycle eMMC... Failed.
Module returned an unknown code (Operation not permitted).
Any idea? (highlighted the part which I think is the issue, but don't know how to resolve it )

I get the same thing too
Sent from my T-Mobile G2 using xda app-developers app

so did you successfully downgrade first?
Downgrade and then ROOT
or if easier after downgrade follow The cyanogen Wiki
or many seem to find it easiest to follow STRAWMETALs PDF GUIDE

I said it was a noob issue, Didn't downgrade it :$ , will do that and update. Thanks demkantor

Unable to ROOT Desire Z from 2.2.1?

I want to load a custom ROM on my Desire Z. (finally!)
And I eventually got adb to work.
Now following the guide: Rooting the Vision (G2/DZ) and DHD; I got as far as this step:
4 S-OFF, root and its friends Super-CID, SIM-unlock, engineering hboot, clockwork recovery and root
In the following section we are trying to gain write access to the emmc by power cycling it.
We recommend to install the engineering hboot as part of the gfree procedure.
In the root shell (indicated by the #) that you got in the Temporary root section execute the following commands:
Code:
# cd /data/local/tmp
# ./gfree -f -b hboot-eng.img -y recovery.img
# ./root_psn
# sync
Wait a few seconds for the changes to "take".
Click to expand...
Click to collapse
Before receiving this error:
Code:
# ./gfree -f -b hboot-eng.img -y recovery.img
./gfree -f -b hboot-eng.img -y recovery.img
--secu_flag off set
--cid set. CID will be changed to: 11111111
--sim_unlock. SIMLOCK will be removed
--hboot set. hboot image hboot-eng.img will be installed in partition 18
--recovery set. recovery image recovery.img will be installed in partition 21
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x000138b4 (80052)
Section index for section name string table: 41
String table offset: 0x000136fb (79611)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x00000a14 (2580)
-- size: 0x000000cc (204)
Kernel release: 2.6.32.21-g132894e
New .modinfo section size: 204
Attempting to power cycle eMMC... OK.
Write protect was successfully disabled.
Searching for mmc_blk_issue_rq symbol...
- Address: c02adc44, type: t, name: mmc_blk_issue_rq, module: N/A
Kernel map base: 0xc02ad000
Kernel memory mapped to 0x40002000
Searching for brq filter...
- Address: 0xc02adc44 + 0x34c
- 0x2a000012 -> 0xea000012
Backing up current partition 18 and installing specified hboot image...
md5sum #1 = 62c0aac0a85f3a0a0cbe364b64c552e6
md5sum #2 = 2ce1bdd5e4c1119ccfcecb938710d742
Backing up partition /dev/block/mmcblk0p18 to /sdcard/part18backup-1363017105.bin ...
Writing image hboot-eng.img to partition /dev/block/mmcblk0p18 ...
md5sum #3 = 62c0aac0a85f3a0a0cbe364b64c552e6
md5sum #3 == md5sum #1 - the hboot image was not installed!
Probably the power cycle of the eMMC failed. Check the messages above.
You might join the IRC channel #G2Root on Freenode for further help!
What should be my next course of action?
Thanks for all suggestions,
Alec Taylor

Double check you have the right hboot downloaded and that the md5sum matches, then run the command again. If you still have issues copy and paste your input/output from cmd here
Sent from my Nexus 7 using xda premium

I have included the input/output from my CMD in the initial post.

Sorry I thought you were just copying and pasting from the guide you were folowing. I guess I was reffuring to the entire root procedure but its no big deal
Its telling you exactly what is happening, phone didn't take the flash of the new engineeging bootloader, probably the emmc didn't cycle, try running command again, if its the same outcome double check your radio version as that can cause this or can you post all info from your hboot screen here
Sent from my SGH-T839 using Tapatalk 2

Also I couldn't get it to work with Gingerbreak or DooMLoRD's Easy Rooting Toolkit either.

*bump*

Right down all info on boot loader, you seem to know what to do but you're missing something, possibly need to change radio as gfree will not work with newer ones
Sent from my Nexus 7 using xda premium

FYI: Was able to root it finally by upgrading my stock to gingerbread from froyo; then back down to non-stock froyo followed by upgrade to modded Jelly Bean.