hi there,
tried to find an answer to this today but wasn't able to finde one.
is there a rom that supports the phone encryption that was introduced to honeycomb/ics? i tried cm9.1 but it's broken. nothing happens when i start the process.
does the stock ics have such an option that works?
thanks in adv
edit: i think it's kernel related. found KeiCS kernel from last year that explicit supports encryption.
no mention in lupus or turbo kernel threads. but perhaps someone knows?
Related
edit: nvm delete thread.
JellyBean isn't fully stable on our DHD/I4G just yet. There are always going to be some issues because HTC didn't give us a full 3.0 kernel for ICS. That could be the reason you are experiencing some lag. Kernels could also help you, try the KangBang performance kernel, although the kernel is leaning towards performance, so it could cause instability
I bought the xda app. Problem?
...
I can't link to the kernel (cause I'm lazy and on the xda app). But when you install a kernel wipe your cache and Dalvik Cache and then flash. That's the proper way of flashing a kernel
I bought the xda app. Problem?
...
sullyy94 said:
Hey thanks for the reply, yeah i successfully installed the stable and performance kernel from this thread : http://forum.xda-developers.com/showthread.php?t=1931386
But the gaming performance still lags compared to 2.3.5. I guess its due to not being fully stable yet.
I had an idea, what if i flash the stock 2.3.5 kernel? Would i get stock performance back or not?
Click to expand...
Click to collapse
You'll ruin your phone. A 2.3.X kernel I'd meant for that specific version of Android. If you mix versions (e.g. a Gingerbread kernel with a Jelly Bean ROM) you'll most likely get bootloops and your phone. At worst you'll brick your phone. Don't ever mix kernel versions. Also don't flash a Sense kernel on a AOSP/AOKP/CyanogenMod based ROM (or vice versa), you'll also have a phone that won't boot.
I bought the xda app. Problem?
...
sullyy94 said:
Hey, thanks for the reply. Yeah I was guessing it had something to do with the kernel. I tried a kernel yesterday not sure which one it was from memory, but when I put the kernel zip onto the phone and installed it through recovery it said install complete. But when I rebooted the phone it gets stuck on a black screen. I can't do anything else unless I take the battery out. I was wondering if anyone can give me a link to the kangbang kernel and instructions in how to install properly if the recovery mode isn't the right way, even though it said kernel updated successfuly. Thanks!
Click to expand...
Click to collapse
The only compatible alternative kernel for JB is the KangBang (at least that i know of). If you flashed another one, that might be why it booted to a black screen.
...
wanted to know if it is possible to make the wild kernel worked in a sgh-i727 and that would have to change this.
* thanks
Alpine Rom + wild kernel
Hi.
i installed the new alpine rom 4.4.4 stable 03 and it works beautifully. Then i tried to flash the new wild kernel v009 and it just wont install. Am i missing something about compatibility? Is anyone else having the same issue? Ive searched online for quite a while and couldnt find any threads or posts that address an issue like this. I thought maybe i might have to use a kernel wipe script first, but i couldnt find any for our t989 so im guessing its not needed. Any help would be appreciated!
BTW after rooting my phone back when i first bought it 3 or so years ago ive used XDA so much and have learned so much from it, but this is my first post! Thanks in advance
Hi all,
i tried to install a [KERNEL][I9195][Stock JB/KK] brisK v2 (+ drain-patches) into my i9195 lte with CM11 snapshot 9
but phone do not work... an error like "com.android" was reported
any solution ?
tnk :cyclops:
I suggest you post this in the proper kernel thread.
This kernel is meant for stock roms only (as stated in the thread title...)
I'm surprised that the system booted up^^
Yes the kernel you mentioned is meant for Stock Rom and not CM.
Long time lurker, first second time posting.
New to ROMs but learnt a lot in the last few weeks.
Tried several ROMs and now wanting to settle with Vanir 2.9.
Flashed it and followed instructions but the wifi isn't working (not turning on).
I first flashed the recommended LX kernel from 3andala's direct link then tried the Optkernel before installing the latest ROM with no luck. I did notice that when the ROM was installing it seems to "install boot.img", something I hadn't noticed before with other ROMs.Is it overwriting the previously flashed boot.img (from LX and Opt??)
Should I be opening the zip and replacing the boot.img with another one (Opt or LX)?
I would have loved to ask in the specific thread but as a noob, forum rules state I cannot ask in the DEV thread until I have 10 posts. I a, allergic to spamming otherwise....
TIA for any help.
I have same problem but its not a kernel problem. Vanir 082814 is last with wifi working. All newer versions have problem to start wifi on my xperia arc s.
Marfy131 said:
I have same problem but its not a kernel problem. Vanir 082814 is last with wifi working. All newer versions have problem to start wifi on my xperia arc s.
Click to expand...
Click to collapse
Thanks.
You may be right. I've tried several kernels without success.
I'll probably have to find another ROM to use for the time being. The Vanir ROM is very smooth though. Transitions effortlessly.
BTW, the 082814 ROM, is it ok? Anything wrong with it? Any improvements in the more recent ROMs over it?
Thanks.
082814 is ok and it is smooth. Newer versions are even faster. I'll wait for new version with wifi fixed
thanks.
Update
All sorted now. WiFi working perfectly.
Vanir 091214
Latest LX Kernel posted by 3andala
Minimal GApps by DHO (instead of the BaNKs but no music player).
XL
Hi guys... I've been using the LGOG E975 for years now , currently I'm running ARTMOD V7 rom on it using the stock kernel.. The only thing that it lacks is lack if storage..
I'll be very grateful if someone could point out the kernels that'll support USB OTG ( of course with the USB Y OTG ) On ARTMOD V7 .. I've used the AK xGenesis gee , and was able to mount external storage using Stick mount.. But it had a lotta bugs like screen brightness was too high even on 0 , glitches etc etc or maybe it justdidn't support the artmod v7..
So i just want you too point out all the kernels that support otg hack on this rom.. Or if there's an alternative then let me know it..
Thanks
Sent from my LG-E975
I don`t know how you booted with that kernel installed on a stock rom.
Even so and regarding your question , I think there`s a version of jollaman kernel tha has that(one of is first releases i believe).
Just search for it or ask him.
10x man..
Can you plzz explain all the type of kernels and roms.. I am a lil confused.. What type of kernels can i use on the stock kitkat..There are mostly these types of roms and their supported kernels..
1. Stock
2. Gee
3. MIUI
4. CM
5. AOSP
What are these..plzz explain and add anyone that i might have missed
And one more question .. I've read a post of Nexus 4 otg hack by ziddey.. There is a flashable zip for the hack that i remember flashing a long time ago.. But the phone didn't boot after it.. Isn't There a way to just flash an OTG hack zip on the stock kitkat or maybe a way to compile one with the hack..
Sent from my LG-E975
Solid kernel may work. I have installed it and it worked very well. But I don't know that OTA working because I didn't tried.