Related
So I first heard about the ported ICS rom on Galaxys2root.com So I downloaded and flashed the file from there which was about 300mbs. Flashed then got stuck in a bootloop. I was able to restore a backed up rom. I thought it might've been the wrong rom so I found a thread here with ICS ROM. Flashed it... same boot loop problem except the first rom boot halfway to a att boot screen. this one just stayed black. At first power button turned on the phone to a battery screen but then turned black.. no animations followed. Now the phone is not responded to any button pushes. It just vibrates intermittently when I plug it in to my charger. It had maybe 35% battery life when it got caught in the boot loop the second time. I'm thinking since the power button was working at first that maybe the intermittent vibrating is because my battery is now dead and it won't charge? Is that possible or is my phone just fuqed? Some one please help!!!!!!!! p.s sorry for the long post.
uthebest said:
So I first heard about the ported ICS rom on Galaxys2root.com So I downloaded and flashed the file from there which was about 300mbs. Flashed then got stuck in a bootloop. I was able to restore a backed up rom. I thought it might've been the wrong rom so I found a thread here with ICS ROM. Flashed it... same boot loop problem except the first rom boot halfway to a att boot screen. this one just stayed black. At first power button turned on the phone to a battery screen but then turned black.. no animations followed. Now the phone is not responded to any button pushes. It just vibrates intermittently when I plug it in to my charger. It had maybe 35% battery life when it got caught in the boot loop the second time. I'm thinking since the power button was working at first that maybe the intermittent vibrating is because my battery is now dead and it won't charge? Is that possible or is my phone just fuqed? Some one please help!!!!!!!! p.s sorry for the long post.
Click to expand...
Click to collapse
Seems like you messed up on wipes. I had different problem when i didnt wipe well. The link you posted from this forum is not usable ICS. Try to get ur phone on download mode and flash via odin.
http://forum.xda-developers.com/showthread.php?t=1513359
Sent from my SAMSUNG-SGH-I727 using xda premium
Yeah that's what I'm thinking, I read later on in that thread that I was supposed to perform a super wipe. Also I can't get my phone into download mode. It won't even turn on. It just vibrates maybe every 3 seconds when I plug it in to charge. When its not plugged in it won't do anything.
Try using a different cable to get into download mode. Specifically an LG cable. I've heard of this working for other people.
Sent from my SGH-T989 using xda premium
Vibrates is a good thing.have you pulled battery?
Sent from my SGH-T989 using xda premium
Teo032 said:
Vibrates is a good thing.have you pulled battery?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yes I've tried pulling the battery. Does nothing except vibrate when i plug it in to charge. still won't turn on. Why is the vibrate a good thing?
uthebest said:
Yes I've tried pulling the battery. Does nothing except vibrate when i plug it in to charge. still won't turn on. Why is the vibrate a good thing?
Click to expand...
Click to collapse
Any kind of response from the phone is a good thing. Worst case scenario is phone literally doesn't do anything or respond to any type of stimulus.
So I'm assuming you know how to access CWM and download mode but just in case there's some confusion, here's how I always access them:
CWM - hold power and volume +/- buttons until phone vibrates then keep holding all (do not let go) until CWM appears. (Others don't have to keep holding after the vibrate, but when I first flashed my phone it wouldn't boot into recovery unless I kept the buttons depressed until CWM actually appeared)
Download - (phone powered off already) hold volume +/- buttons (not power); plug in USB cable (still holding buttons); wait for vibrate (still holding buttons); download mode screen appears (release buttons only after this point)
If nothing else works, you can always try sending it back to Samsung/Tmobile to see if they'll replace it for you. If you can't get it to odin/download mode then chances are good that they won't be able to tell that it was rooted and thus would have no reason to void your warranty.
Also, if I'm not mistaken, raver's AOSP ICS ROM (the second one you flashed) doesn't have boot animation support so it's supposed to stay black on boot. Experimental ROMs especially may take a long time for first boot so you should always not touch it for at least 10 minutes before you try any kind of battery pull or powering off.
there are a lot of threads about people having problems when following instructions on galaxys2root.com
Sent from my SGH-T989 using XDA
Thanks!
I'm Back In The Game!!! The weirdest thing happened. So I went to my friends house and put my battery in his s2 to see if it had any life and it was. I threw it back in my phone and for some reason it booted up to the ROM I flashed. ICS was beautiful on it but I immediately went back to my recovery rom lol. Lesson learned. Thanks guys for the help this was my first time posting a problem on this forum and I love how quick everybody is to help.
uthebest said:
I'm Back In The Game!!! The weirdest thing happened. So I went to my friends house and put my battery in his s2 to see if it had any life and it was. I threw it back in my phone and for some reason it booted up to the ROM I flashed. ICS was beautiful on it but I immediately went back to my recovery rom lol. Lesson learned. Thanks guys for the help this was my first time posting a problem on this forum and I love how quick everybody is to help.
Click to expand...
Click to collapse
Glad to hear it worked out for you. Can be a pretty scary experience. Remember: patience is your friend, especially the first time you boot to a new ROM. If you think the boot screwed up, the best way to ENSURE that it screws up is to power it off/pull battery. Always wait 10 minutes before touching it.
Hi. Running TWRP with a CM10 Nightly (8/14 I think). Well I wasn't doing anything special and the phone decided to reboot and then just started the haptic feedback boot loop, no samsung logo. I took the battery out let it sit for about a minute and put it back in. Started on it own, got to a samsung logo and then rebooted back to the black screen and buzzing.
After everything I have tried I figured out it can boot into anything but only for about 10 seconds with pulling the battery and letting it sit. Download mode shows up then reboots. TWRP can boot up to the splash screen then it reboots.
I'm at work right now so I am unable to try any advanced methods for getting this back up, but download mode reboots worry me. Do I need to warranty it out?
Achmonster said:
Hi. Running TWRP with a CM10 Nightly (8/14 I think). Well I wasn't doing anything special and the phone decided to reboot and then just started the haptic feedback boot loop, no samsung logo. I took the battery out let it sit for about a minute and put it back in. Started on it own, got to a samsung logo and then rebooted back to the black screen and buzzing.
After everything I have tried I figured out it can boot into anything but only for about 10 seconds with pulling the battery and letting it sit. Download mode shows up then reboots. TWRP can boot up to the splash screen then it reboots.
I'm at work right now so I am unable to try any advanced methods for getting this back up, but download mode reboots worry me. Do I need to warranty it out?
Click to expand...
Click to collapse
From the looks of it, looks like a bad power button. Its a know problem with SGS2, been many similar threads done. Actually, it kind of worries me!! mobiletech will fix it for cheap, or you can warranty it out.
LoopDoGG79 said:
From the looks of it, looks like a bad power button. Its a know problem with SGS2, been many similar threads done. Actually, it kind of worries me!! mobiletech will fix it for cheap, or you can warranty it out.
Click to expand...
Click to collapse
Duh! Thanks, that makes a lot of sense. Appreciate it.
.
Achmonster said:
Hi. Running TWRP with a CM10 Nightly (8/14 I think). Well I wasn't doing anything special and the phone decided to reboot and then just started the haptic feedback boot loop, no samsung logo. I took the battery out let it sit for about a minute and put it back in. Started on it own, got to a samsung logo and then rebooted back to the black screen and buzzing.
After everything I have tried I figured out it can boot into anything but only for about 10 seconds with pulling the battery and letting it sit. Download mode shows up then reboots. TWRP can boot up to the splash screen then it reboots.
I'm at work right now so I am unable to try any advanced methods for getting this back up, but download mode reboots worry me. Do I need to warranty it out?
Click to expand...
Click to collapse
I got same problem today.I don't know how to deal with it.
You got a soft brick, you can restore via Odin.
Sent from my SAMSUNG-SGH-T989 using xda premium
quest4fire said:
You got a soft brick, you can restore via Odin.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
It restarts on its own in DL mode and recovery, how will he be able to Odin?
Sent from AOKP Goodness
LoopDoGG79 said:
It restarts on its own in DL mode and recovery, how will he be able to Odin?
Sent from AOKP Goodness
Click to expand...
Click to collapse
Lol yeah bad power button
Sent from my SGH-T989 using xda app-developers app
Teo032 said:
Lol yeah bad power button
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
what is bad button problem, can i ship the rooted phone to samsung customer service?
terrywang903 said:
what is bad button problem, can i ship the rooted phone to samsung customer service?
Click to expand...
Click to collapse
may be able to find someone locally who can fix it for your you or at the least unstick it long enough so you can odin a stock rom and send it on its way
playya said:
may be able to find someone locally who can fix it for your you or at the least unstick it long enough so you can odin a stock rom and send it on its way
Click to expand...
Click to collapse
Mobiletech has a power button service. I've heard its cheaper then JTAG.
Sent from AOKP Goodness
LoopDoGG79 said:
Mobiletech has a power button service. I've heard its cheaper then JTAG.
Sent from AOKP Goodness
Click to expand...
Click to collapse
what is Mobiletech ? where I can find it? Thank You!
terrywang903 said:
what is Mobiletech ? where I can find it? Thank You!
Click to expand...
Click to collapse
Here you go, very helpful site.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile/
Sent from AOKP Goodness
This happened to my T989 a couple of days ago as well... I was pretty sure it wasn't a software brick as I hadn't been tinkering with the phone at all since putting CM9 on it a few weeks back. But an issue with the power button makes sense, I was actually able to boot it up and/or get it into recovery just by continually pressing the power button (guessing this interrupts the signal that the broken button is sending)... of course as soon as you stop pressing the button, the phone shuts off again.
I'll have to look into the mobiletech repair.
Temporary Fix to get your backup
I had a co-worker have this happen to her T989 that I flashed CM10 to. I was afraid that something had happened and she had unintentionally done something to brick the phone (it had been running fine for about a week prior to this). It is definitely hardware related, as you can just touch the power button and it goes into a screen wake/sleep fit of rage before finally hard resetting (presumably because it thinks the power button has been held down for 10 seconds). I was finally able to get it to stop rebooting long enough to get a TWRP backup and get them downloaded off of the phone so that she can get a replacement; and here is how I did it.
If you are getting boot cycle and it is vibrating every 3 seconds you can get it to "unstick" by putting your fingernail as far behind the power button as possibly and prying out. This will unstick it.
EDIT: I wanted to point out that I was most successful when I pried from the top or the back of the device. Sometimes when you pry it, if your finger slips it will redo the stick and will continue to reboot. So if at first you don't succeed...
Once you have done this, it is VERY sensitive. I literally had it start boot cycling one time after accidentally bumping the desk the phone was sitting on. Prying the button back allowed me to boot back up.
If you get it unstuck, be very careful about setting it down, turning it power button side up and even looking at it cross and you should be able to get it to stop rage quitting long enough to get a backup performed and even copied to your sdcard/computer.
I hope someone finds this useful.
On a side note: co-worker has purchased her phone outright and is planning on sending it back for a replacement. Should I flash it back to stock before that happens or since she owns it outright will they even care?
TIA,
Same thing happened to me awhile back and like said above, I sent it to MobileTechVideos and had my phone back within a week fixed and perfect. I have used MobileTechVideos twice now and both times they have fixed my T989 without problem.
Face_Melter said:
Same thing happened to me awhile back and like said above, I sent it to MobileTechVideos and had my phone back within a week fixed and perfect. I have used MobileTechVideos twice now and both times they have fixed my T989 without problem.
Click to expand...
Click to collapse
I sent the rooted phone to samsung. and get free repaired. It is amazing.
Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated
Its a sticky power button.
There has been plenty of threads about this. Search and ull find me and my suggestions on several of them.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
bzlik88 said:
Its a sticky power button.
There has been plenty of threads about this. Search and ull find me and my suggestions on several of them.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Cant be because it does not restart in recovery mode or download mode. I actually did a full wipe system and it fixed the issue. But now i realize when i start downloading my banking app, pandora, and other apps it starts crashing again. I dont know what to do. I guess I cant use any apps on my galaxy s2... lol this is sooooo stupid
rayoubi said:
Cant be because it does not restart in recovery mode or download mode. I actually did a full wipe system and it fixed the issue. But now i realize when i start downloading my banking app, pandora, and other apps it starts crashing again. I dont know what to do. I guess I cant use any apps on my galaxy s2... lol this is sooooo stupid
Click to expand...
Click to collapse
Hmmm interesting....
Would u mind going to a custom ROM? If not then I suggest u try slimstar 2.2 and see if everything works. I think its whatever ROM u downloaded....keep me posted
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
rayoubi said:
Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated
Click to expand...
Click to collapse
i work reparing cellphones and t989 have 2 problems, one of them is power button problems and the other one is board problems.. that poblem come with most of gs2.. i mean isnt the first time i see it...
My t989 is having the same problem
xX_Psycho_PR_Xx said:
i work reparing cellphones and t989 have 2 problems, one of them is power button problems and the other one is board problems.. that poblem come with most of gs2.. i mean isnt the first time i see it...
Click to expand...
Click to collapse
I took it to a repair shop, where I was told to send it to Samsung to do a heavy-duty root. The power button does need to be replaced because there is no spring when you push down on it. I have no idea if there's a root glitch. Has anyone sent their phone to Samsung? What happened? Are there alternatives?
Thank you!
chicamama said:
I took it to a repair shop, where I was told to send it to Samsung to do a heavy-duty root. The power button does need to be replaced because there is no spring when you push down on it. I have no idea if there's a root glitch. Has anyone sent their phone to Samsung? What happened? Are there alternatives?
Thank you!
Click to expand...
Click to collapse
It was amazing, I had the same problem but all i did was open up the back up undoing all the tiny screws and then took a can on compressed air and sprayed out the power button and its been working for more than a month now with the problem completely gone! try that first before sending to sammy.
Ok I am in the same boat. My device does not boot up, it will get to Samsung logo and restart half the time and the other half just vibrates every 2 seconds. I removed the battery while plugged in and it still vibrates. I took it apart and blew the power button with compressed air and nothing. Here is the funny thing if I bang the hell out of it, it almost boots up. Is there something that I can do less than sending it to Sammy ? If not I will sell it on craigslist for parts.
saldebot said:
Ok I am in the same boat. My device does not boot up, it will get to Samsung logo and restart half the time and the other half just vibrates every 2 seconds. I removed the battery while plugged in and it still vibrates. I took it apart and blew the power button with compressed air and nothing. Here is the funny thing if I bang the hell out of it, it almost boots up. Is there something that I can do less than sending it to Sammy ? If not I will sell it on craigslist for parts.
Click to expand...
Click to collapse
Same thing here. Only way to get it to power on is by hitting it, the harder the better it seems. After it turns on, touching the power button will make it go in to the restart loop 90% of the time. This sucks!
For me this started after I dropped my phone...with the case on and on carpet. I have also opened it up and sprayed with compressed air to no avail.
RogueCoyote said:
Same thing here. Only way to get it to power on is by hitting it, the harder the better it seems. After it turns on, touching the power button will make it go in to the restart loop 90% of the time. This sucks!
For me this started after I dropped my phone...with the case on and on carpet. I have also opened it up and sprayed with compressed air to no avail.
Click to expand...
Click to collapse
Hi my problem is the same as I opened it and verify that the power button is fine (I think so) but still do not like someone comes up with a solution?????
Solution in my case !
rayoubi said:
Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated
Click to expand...
Click to collapse
Hi Folks,
I had the same problem, the problem started when I dropped my fone on carpeted floor, here are symptoms
Fone restarts on its own, start the boot, inbetween the boot starts again, then, keeps vibrating every two seconds, you have to pull the battery out to stop it,
As soon as you put the battery back in, it restarts, again getting stuck, and then vibrating every two secods,
Here is what i did
- Cursed Samsung for making a sh***y phone - Didnt work
- Smacked my phone with whatever I could fine - Didnt work
- Opened all the screws up, took apart phone, pulled out the power button module (pcb), noticed power button was loose,put some glue into it, dried it, put it back, & ITS BEEN WORKING SINCE THEN ! It was a hardware fault, its not software !
Just my two cents, it worked in my case, I cannot guarantee if it will in your case too, try at your own risk !!
jctusa7 said:
It was amazing, I had the same problem but all i did was open up the back up undoing all the tiny screws and then took a can on compressed air and sprayed out the power button and its been working for more than a month now with the problem completely gone! try that first before sending to sammy.
Click to expand...
Click to collapse
Heh, I can't believe this... but it worked for me... powered on my air compressor, took logic board out, and Air Air Air in to the power button area, worked ! Thank you for this tip jctusa7
SAME
rayoubi said:
Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated
Click to expand...
Click to collapse
I need this fixed
Tyler Tigner said:
I need this fixed
Click to expand...
Click to collapse
Watch this video, it's how I fixed mine a few months ago: youtube.com/watch?v=pqBgbN8NLjI
Malth said:
Watch this video, it's how I fixed mine a few months ago: youtube.com/watch?v=pqBgbN8NLjI
Click to expand...
Click to collapse
Same issue with SGH-M919. I was rooted and the rom I tried to use wouldn't work because the kernel caused some issues so I figured I would go back to stock. The device wouldn't go into recovery mode, so I flashed the stock rom via Odin. After the ROM loaded, the phone reset and I saw the Samsung screen then it rebooted and so on each time. It's not the power button as it works, has the spring feel to it and the phone would come one by itself if it was broken. So what can I do or am I in trouble?
Also, the phone will vibrate every 2 seconds
djerick3 said:
Same issue with SGH-M919. I was rooted and the rom I tried to use wouldn't work because the kernel caused some issues so I figured I would go back to stock. The device wouldn't go into recovery mode, so I flashed the stock rom via Odin. After the ROM loaded, the phone reset and I saw the Samsung screen then it rebooted and so on each time. It's not the power button as it works, has the spring feel to it and the phone would come one by itself if it was broken. So what can I do or am I in trouble?
Also, the phone will vibrate every 2 seconds
Click to expand...
Click to collapse
Sure, the power button will "work", but if it's constantly vibrating and rebooting, it's probably an issue with the power button. Do what it shows in the video I posted, and if you do it right it'll probably fix it. I gad to attempt it twice as it didn't fix it the first time, but it's been like 4 months and I haven't had an issue since.
Thank you but it was the kernel causing problems. Somehow, the new ROM messed up the partitions and subsequently required a full wipe including all data then I flashed the stock ROM back via Odin and it was fine. I rooted it again and flashed Bliss Pop 1.8 and I love that ROM. No issues at all. Thanks for the help. I'm slowly learning about ROMs and Linux etc.. I appreciate the help. Does anyone have any advice as to how I can learn more??? Where do I post to get past this 10 posts rule???
Eric
Sent from my LG-LS990 using XDA Free mobile app
---------- Post added at 12:39 AM ---------- Previous post was at 12:29 AM ----------
Sent from my LG-LS990 using XDA Free mobile app
Wow I just realized that post was from a week ago and that was for my girls S4. We got rid of it anyway. My response was regarding my Sprint LG G3 which I am slowly mastering.
Same thing here but here i have a Lenovo …idk what to do
I have a SPH L710 galaxy s3 (sprint). I recently flashed a Rom called hyperdrive 4.1.2 that was on it's RLS11. following the instructions (factory reset x2, wipe cache, wipe dalvik, wipe system), I then picked the features i wanted in the built in aroma installer and let the rom flash. When it was done I noticed i kept getting the message "the process com.android.phone has stopped". So i performed a clean install of my previous Rom which was Liquid Smooth.
A day or two later I noticed hyperdrive has released it's RLS 12, so i decided to give it another try. This time there was an option in the aroma installer for developer picks so i selected that, thinking my previous attempt i may have picked conflicting files in the aroma installer. The Rom worked fine for about a day. Then the next day while it was charging after the battery have completely died the night before. I noticed the phone had rebooted on its own, then it started going into a boot loop. I did a battery pull, and i noticed when i put it back in, before i could even hold the buttons to get it into recovery mode or download mode, the phone would vibrate and turn on by itself, without me pressing any buttons at all. After some trying i was able to have the buttons held so when i inserted the battery, i was already holding the buttons to try to get to recovery. When I did this it would say it was about to go into recovery, then the screen would go black. The same thing when I tried getting it into download mode, It would show the download mode screen, then go to a black screen. I Then did some research, after seeing no one else really having this problem, and noticing that since it was still seeing boot screens before the black screen, it shouldn't be a hard brick.
I decided to order a USB jig for my phone that came today. When inserted the battery with the usb jig the phone still turned on by itself, but it was able to go to download mode and it stayed at the screen. I used odin 3.07 to flash SPH-L710_MD4_1130792_Rooted_Nodata, which was a tar file you would use if you wanted to keep your user data. It took 10 minutes to flash but everything seemed to be a success, it rebooted my phone and everything seemed to be working fine. After about 20 minutes of my phone being plugged back into a charger and i was halfway through with downloading an app from the android market where out of nowhere my phone temporarily froze and then rebooted, to where it will show the samsung screen, then the samsung galaxy s3 screen, then just goes to a black screen. Now even with the USB jig, it will still power on by itself as soon as a place in the battery, go directly to download mode, but then go to a black screen within 3-4 seconds before i can do anything.
Has anyone ever encountered anything like this before? At first i thought it might be a stuck power button, but when I was able to flash through download mode with the USB jig that first time it makes me think it is bricked. Any help or insight would be GREATLY appreciated.
dubbz84 said:
I have a SPH L710 galaxy s3 (sprint). I recently flashed a Rom called hyperdrive 4.1.2 that was on it's RLS11. following the instructions (factory reset x2, wipe cache, wipe dalvik, wipe system), I then picked the features i wanted in the built in aroma installer and let the rom flash. When it was done I noticed i kept getting the message "the process com.android.phone has stopped". So i performed a clean install of my previous Rom which was Liquid Smooth.
A day or two later I noticed hyperdrive has released it's RLS 12, so i decided to give it another try. This time there was an option in the aroma installer for developer picks so i selected that, thinking my previous attempt i may have picked conflicting files in the aroma installer. The Rom worked fine for about a day. Then the next day while it was charging after the battery have completely died the night before. I noticed the phone had rebooted on its own, then it started going into a boot loop. I did a battery pull, and i noticed when i put it back in, before i could even hold the buttons to get it into recovery mode or download mode, the phone would vibrate and turn on by itself, without me pressing any buttons at all. After some trying i was able to have the buttons held so when i inserted the battery, i was already holding the buttons to try to get to recovery. When I did this it would say it was about to go into recovery, then the screen would go black. The same thing when I tried getting it into download mode, It would show the download mode screen, then go to a black screen. I Then did some research, after seeing no one else really having this problem, and noticing that since it was still seeing boot screens before the black screen, it shouldn't be a hard brick.
I decided to order a USB jig for my phone that came today. When inserted the battery with the usb jig the phone still turned on by itself, but it was able to go to download mode and it stayed at the screen. I used odin 3.07 to flash SPH-L710_MD4_1130792_Rooted_Nodata, which was a tar file you would use if you wanted to keep your user data. It took 10 minutes to flash but everything seemed to be a success, it rebooted my phone and everything seemed to be working fine. After about 20 minutes of my phone being plugged back into a charger and i was halfway through with downloading an app from the android market where out of nowhere my phone temporarily froze and then rebooted, to where it will show the samsung screen, then the samsung galaxy s3 screen, then just goes to a black screen. Now even with the USB jig, it will still power on by itself as soon as a place in the battery, go directly to download mode, but then go to a black screen within 3-4 seconds before i can do anything.
Has anyone ever encountered anything like this before? At first i thought it might be a stuck power button, but when I was able to flash through download mode with the USB jig that first time it makes me think it is bricked. Any help or insight would be GREATLY appreciated.
Click to expand...
Click to collapse
How long did you let it set on the black screen because it takes a while to boot up the first time after flashing a ROM.
GiantJay said:
How long did you let it set on the black screen because it takes a while to boot up the first time after flashing a ROM.
Click to expand...
Click to collapse
Well i just placed the battery back in, it started on it's own without my pressing anything again, and i've been timing the last 5 minutes. but it seems like it will stay a black screen indefinitely. unless i remove the back of the phone, or snap it back into place, or any kind of micro impact movements it seems, when I do that it vibrates like it's first being turned on, and shows the samsung screen, then the samsung galaxy s3 screen, then it will go black again.
See if your adb on your computer can recognize the phone while it's stuck on the black screen. You might be able to push a Rom or recovery over using that.
Sent from my SPH-L710 using xda app-developers app
You may want to just start fresh and lose your data with a different stock file. That kinda happened to me before on the gs2 and I found better results with a 100% fresh start. The no data always left me with a hangup or two after getting the phone to boot.
Sent from my SPH-L710 using Tapatalk 2
topherk said:
See if your adb on your computer can recognize the phone while it's stuck on the black screen. You might be able to push a Rom or recovery over using that.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Not picking it up on adb.
dante32278 said:
You may want to just start fresh and lose your data with a different stock file. That kinda happened to me before on the gs2 and I found better results with a 100% fresh start. The no data always left me with a hangup or two after getting the phone to boot.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
After the first odin flash i was thinking the same thing. But that's the thing, it won't stay on the download mode screen long enough for me to even try to flash anything else through odin. I'm also noticing when connected to the charger, if i make a slight impact against the phone with my palm, the screen will briefly show the battery icon as if the phone is charging when it is turned off, then the screen will go black again. When it is unplugged, is when it will show the samsung screen, then the samsung galaxy s3 screen, then go black again.
That's weird...sounds like something is loose. Any kind of recent impact damage to the phone? Dropping it, throwing it at your cat, anything like that?
To me it sounds like maybe your power button is stuck "down"
If you didn't know, the power button has a fail safe reboot that happens after holding for about 10 seconds. So no matter what, if you phone is frozen or whatever, holding power more than 10s will cause it to reboot. That would also explain why its turning itself on as soon as you pop in the battery.
toolegit said:
That's weird...sounds like something is loose. Any kind of recent impact damage to the phone? Dropping it, throwing it at your cat, anything like that?
Click to expand...
Click to collapse
not recently, and if it was ever dropped, it would be in it's case... But i had noticed that while it was in it's power glove case, sometimes i would have to use more than normal pressure on the power button to get the phone to respond. I was wondering if something was stuck, just haven't read anything like that happening to anyone, and when I used the jig the first time the screen stayed on.
This has probably been resolved or mentioned before so please do not flamed me up. Just needing some quick help.
This is not my device this is a friends. He had a darkside V8 Rom which me and him thought are giving him issues. The phone will literally reboot by itself and vibrate during boot up. Never seeing the home screen again. Only way to remedy this is to take out the battery and if we get lucky it will see the home screen again.
Thankfully I was able to boot into recovery and flash the Milestone AOKP MR1 Build and flashed the gapps. I did this sucessfully. So rebooted the device again to make sure everything will be good. Now the phone will only show the samsung logo and black screen with pulses of vibrations every second. I tried plugging it in and it doesn't even turn on just vibrates. Only when I take out the battery then it will actually turn on,but just the samsung logo followed with the black screen and pulsating vibrations.
Is the phone done? Is it perm bricked? I can't even go on download mode
EDIT: And yes I did a clean flash. I did all the proper wipe cache/dalvik, factory reset etc. etc.
It sounds like a power button issue. Same symptoms.
If you aren't familiar with the phone because it isn't yours;
They tend to start the boot process as soon as the battery is installed without pressing power. You might be missing the chance to put it in download mode, hold the volume button as you put the battery in. If you want to go from ICS to a 4.2.2 ROM you should ODIN to the latest stock ROM first then re-root , there some radio upgrades that can't be flashed from recovery.
Z33type said:
This has probably been resolved or mentioned before so please do not flamed me up. Just needing some quick help.
This is not my device this is a friends. He had a darkside V8 Rom which me and him thought are giving him issues. The phone will literally reboot by itself and vibrate during boot up. Never seeing the home screen again. Only way to remedy this is to take out the battery and if we get lucky it will see the home screen again.
Thankfully I was able to boot into recovery and flash the Milestone AOKP MR1 Build and flashed the gapps. I did this sucessfully. So rebooted the device again to make sure everything will be good. Now the phone will only show the samsung logo and black screen with pulses of vibrations every second. I tried plugging it in and it doesn't even turn on just vibrates. Only when I take out the battery then it will actually turn on,but just the samsung logo followed with the black screen and pulsating vibrations.
Is the phone done? Is it perm bricked? I can't even go on download mode
EDIT: And yes I did a clean flash. I did all the proper wipe cache/dalvik, factory reset etc. etc.
Click to expand...
Click to collapse
Try taking it apart and cleaning around the power button it could just have junk around it that tricks the phone into thinking that you are constantly pushing the button. Option two buy a download dongle for $5 from ebay to force download and see if it stays on long enough to flash a rom. Finally, it possibly is the old faulty power button situation that is known to happen with the S2 to some people which means it will need to be replaced.
Sent from my SGH-M919 using Tapatalk 2
donm76 said:
It sounds like a power button issue. Same symptoms.
Click to expand...
Click to collapse
Agreed. This is almost certainly caused by a bad/stuck power (on/off) switch. It's a very common problem on all the US-carrier Galaxy SII phones. (I think the international "i9100" model uses a different type of switch.) You can simulate the issue on a good T989 by holding down the power button when you turn it on - it will reboot and then vibrate every few seconds with a blank screen, until you release the power button.
Some people have had success poking/pulling/cleaning/washing the switch, but replacing it is the only reliable long-term fix.
If you don't have insurance coverage and are out of warranty, you can replace the switch yourself. Several eBay sellers offer replacement power switches for the SGH-T989 Galaxy S2. (about ten bucks). You'll need a steady hand, a fine-tipped soldering iron, and some small solder. A magnifying glass and a bit of paste flux couldn't hurt either.
Or, if you don't have mad soldering skills, a few companies offer mail-in repair service:
- $39: http://www.ebay.com/itm/Power-Switch-REPAIR-SERVICE-T-Mobile-Galaxy-S2-SGH-T989-Samsung-Fix-Bad-Button-/161028469601
- $45: http://www.ebay.com/itm/Power-Button-Repair-Samsung-Galaxy-S-Galaxy-S-II-Galaxy-NOTE-MORE-/320910836052
Did u flash correct gapps after flashing the ROM? If the answer to this question is no it could've caused a bootloop in which case u need to reboot into recovery, do a full wipe ( data, system, cache, dalvik ) then flash the ROM then flash gapps, or the power button issue, either way easy fix
Sent from my SGH-T989 using xda premium