I posted this the other day. It never showed up? Did someone delete it?
Anyways - My phone just seems to ring only once when I call it. It will continue to ring through but only without ringing. If I put vibrate as a choice it will vibrate but other wise it just is silent and rings until voicemail.
I don't have a profile setup for ring that I can see.
Any ideas?
Thanks.
Noticed this myself, it doesn't seem to loop the ring tone but will continue to vibrate
EddyOS said:
Noticed this myself, it doesn't seem to loop the ring tone but will continue to vibrate
Click to expand...
Click to collapse
+1 same here
I think the problem may lie with the audio file. It seems to loop with the default ringtones but not with custom. May need to set the audio files to loop?
What kind of audio format are you using?
In a German board some guy had this issue with .ogg and could fix it by using . mp3 instead.
Haven't checked by self cause I always pick up the phone instantly.
I am using the the standard ring tones with the Nexus. It's called Digital Phone.
I have tried all the rings tones and they all do the same exact thing. Ring once and then silence or If the setting is changed to Ring and Vibrate then it will vibrate..
Update: I did notice something after playing around with it a little longer. Even though one of the included ring tones is Ditigal Phone and many others. There are many tones that start from D-Z do not loop when you are testing the tones. Any ringtone from Digital Ring Tone and below do not loop in playback.
So that must be the case for me at least. Anyone test it out and confirm?
When playing ringtones to see if they loop - I can't get anything from Digital RingTone and below to play in a loop for testing.
http://forum.xda-developers.com/showthread.php?t=1390644
I am having an issue getting my boot sound to be at the proper volumes. I've tried all the basic troubleshooting tips like adjust system volume, and editing the bit rate of the MP3. I am running AOKP build 39 and what happens is when the sound is supposed to play it is so quiet it is unnoticeable unless you are in a quiet room. Then when the screen brightens when it finally loads is plays the last 3 or 4 seconds at full volume. I've tried different sound binaries and boot animations and MP3 files but its all the same. Anyone have any ideas about this?
Sent from my SPH-D710 AOKP
So no one wants to help?
Sent from my SPH-D710 AOKP
The in call audio doesnt work through the normal call speaker or speakerphone. However when i connect to earphones it does work. I have tried rebooting, battery pulling and cache&dalvik wiping. I feel like I read this being a CM issue but i cant find the source. Im running the PAC man Rom, its kernel, and the team acid audio engine mod and clear audio add ons. Does anyone have a solution? Thanks.
Update: So I found and flashed the CM workaround, but that didn't work. I flashed it a few more times and every time i tried to call someone the screen temporarily froze and the call screen failed to show up. I suspected it was a hardware problem. I then wiped and flashed a touchwiz and the problem was gone. So its seems that the problem was of CM origin. Idk why the problem persisted. Im attempting to find a fix in the CM thread and S4 noob faq, so i guess this thread can be closed down.
About a month ago I screwed up my phone and had to LGNPST it for the first time. I'm not even sure if this is the moment this problem appeared but it may have been the start of something. Before that, I was running a JB CM build with a GPS lock issue that I never got around to fix and decided to fix it before I flashed a Kit Kat rom. That lead to a bad stock-based flash which then lead to the LGNPST fix. I then flashed to a different stock-based rom, updated PRL and obtained a GPS lock, then flashed a few different roms before settling on the offical CM 11 rom.
Somewhere after the LGNPST I ran into problems with the sound volume settings being completely ignored and this issue appears across multiple roms. I'll have the settings set to silent and it'll still play some odd sound whenever I receive an sms. When I try to change the sounds, nothing plays when I am previewing the sounds and if I select one the settings will crash. The ringtone files do exist in /media/audio/ringtones and they play correctly in Apollo. I have also downloaded Zedge and used it for setting the sounds inside the settings screen and it does not play the sound when previewing and crashes when I select a sound. Setting the ringtone inside of the actual Zedge application does work for the notification ringtone, but does not work with phone ringtone (it does appear to be changed in settings, but no sound is played during calls). Furthermore, when I attempt to set the sound in Hangouts for either SMS or regular hangout messages, it does not change from "Silent" but does not show any crash messages or anything.
In a possibly related note, every time I flash a new rom it will get stuck on activation until I just skip it. However, data services work completely fine. I have no problems with making calls, 3G/LTE, sending and receiving sms including pictures.
Any help would be greatly appreciated. Thanks.
Sometimes when receive incoming call, phone won't ring, just vibrate. That's happening randomly, sometimes it's ok for 2 days and then start, sometimes on every couple of calls, for 2-3 calls it's not ringing and then start to ring normally again... Of course, I'm not in silent mode, volume is set to max, when enter settings and select ringtone, it plays fine...
This start when I upgrade to Lollipop, on stock rom and custom roms, tried 4-5 roms, all Sense. I run RUU for couple of times, for clean start of new rom, my firmware is up to date, but it happens every time, so I think it is Lollipop problem, not rom.
Is anyone experienced this problem too, or know some solution?
Thanks.
So no one have this problem? For everyone phone rings fine every time?
Try to restart the phone. It will solve the problem for you. My wife's phone had same problem and that's what I did.
Yes, I restart the phone and the problem re-apear shortly, so that is not the solution.
m8 problem
I have the same fcking problem for over 2-3 months now and I think it's lollipop problem, it's very annoying every day I got dozens of missed calls ...i don't know what to do, did you find anything ?? Thanks
Did you set some ringtone which came with Lollipop, or some of yours personal ringtones?
I always use my ringtone, simple mp3 file, but I select one of pre-installed ringtone about 3 weeks ago and have no problem since. Don't know why, but it seems that Lollipop have some problems with some mp3 files. Those files plays perfectly well in any music app on phone, but if you set it like ringtone, sometimes ringing and sometimes not.
I found some program that helps to "convert files to Android-playable" so I convert my mp3 ringtone with that program (still mp3, but larger size) and will see if that helps.
I have done it today so must pass week or two to be sure if it helps or not, will post here.
So, my converted ringtone didn't work. Then I tried to put the mp3 file in to /system/media/audio/ringtones where the other ringtones are, but that didn't work either. I noticed that most of stock ringtones are in .flac format, so I converted my ringtone to .flac and it worked! My phone rings normally for 2 weeks now.
So, if anyone have problem with their custom ringtones, just convert them to .flac format with any sound converter on PC and that will be fine.
Ok I will do it your way, just to inform you, I did a factory reset for nothing same as before everything is working like, notification sound, message sound, music player but still no incoming sound, this is a really fcked up thing, it's nothing to repair the software is fcked up I guess,I am so dissapointed
Just convert your ringtone to .flac format with any free converter (ask Google), and it will be fine. For me, it's working over the month now.
The ringtone sound is fine now(tried it your way), but now I have another problem with mic, when someone tries to call me they can't hear me only on speaker mode, really mad now X(.
It might look silly, but try to make G calibration (Settings>Display & gestures>G-sensor calibration)