Related
So There are 2 JB TW roms posted on here that i see.. and after it becomes officially available, more roms will start to come out.. The old wallet fix for ICS WILL NOT work for Jellybean.. NFC will break and your phone will vibrate like crazy...
I dug through sprints latest leak and compiled a flashable zip file to make Google Wallet work... Tested on my end and it works!
The steps still apply from ICS versions
... open your buildprop in text editor and edit these fields..
ro product model ..... to -- Galaxy Nexus
ro product name...........to-- yakju
ro product device .......to -- maguro
save it...
Reboot into recovery... Flash the JMJellyBeanWalletFix.zip
reboot...
go to the playstore and download wallet....... You should be good to go..
Ignore the "unsupported device" message on the top... its saying this because the phone is rooted... everything works!
Nice job bro! :good:
Sent from my SGH-T999 with frosty jellybeans.
thank you... this was the only thing keeping me with aosp roms.. I use google wallet everywhereeee,.... well thats not the case nomore... im back on your rom!
joemagistro said:
So There are 2 JB TW roms posted on here that i see.. and after it becomes officially available, more roms will start to come out.. The old wallet fix for ICS WILL NOT work for Jellybean.. NFC will break and your phone will vibrate like crazy...
I dug through sprints latest leak and compiled a flashable zip file to make Google Wallet work... Tested on my end and it works!
The steps still apply from ICS versions
... open your buildprop in text editor and edit these fields..
ro product model ..... to -- Galaxy Nexus
ro product name...........to-- yakju
ro product device .......to -- maguro
save it...
Reboot into recovery... Flash the JMJellyBeanWalletFix.zip
reboot...
go to the playstore and download wallet....... You should be good to go..
Ignore the "unsupported device" message on the top... its saying this because the phone is rooted... everything works!
Click to expand...
Click to collapse
Been looking for this for a while
Thank You
thanx op and i can confirm it works on djintrigue808 latest build and wildchilds latest build.
Thanks for your work.
joemagistro said:
So There are 2 JB TW roms posted on here that i see.. and after it becomes officially available, more roms will start to come out.. The old wallet fix for ICS WILL NOT work for Jellybean.. NFC will break and your phone will vibrate like crazy...
I dug through sprints latest leak and compiled a flashable zip file to make Google Wallet work... Tested on my end and it works!
The steps still apply from ICS versions
... open your buildprop in text editor and edit these fields..
ro product model ..... to -- Galaxy Nexus
ro product name...........to-- yakju
ro product device .......to -- maguro
save it...
Reboot into recovery... Flash the JMJellyBeanWalletFix.zip
reboot...
go to the playstore and download wallet....... You should be good to go..
Ignore the "unsupported device" message on the top... its saying this because the phone is rooted... everything works!
Click to expand...
Click to collapse
Fan-freakin-tantistic! Do we change the build.prop file back after getting Wallet up and running? If so, can you please post the steps, etc? Really appreciate your work!!
For those who wanted AOSP MMS apk working with Jellywiz: http://forum.xda-developers.com/showthread.php?t=1921429
Thanks a ton for this! I went ahead and wrote a quick article on OMG!Droid to spread the news.
http://omgdroid.com/how-to-install-...ile-galaxy-s-iii-running-touchwiz-jelly-bean/
ShermCraig said:
Fan-freakin-tantistic! Do we change the build.prop file back after getting Wallet up and running? If so, can you please post the steps, etc? Really appreciate your work!!
Click to expand...
Click to collapse
It wouldn't hurt to try, but I think if you change the build back to stock, wallet will relock and FC saying that your device isn't supported
Sent from my galaxy nexus using Xparent Purple Tapatalk 2
Wow... posted in wrong forum. Its too early. Sorry guys.
thank you soooo freaking much!! I've been wanting to try out the NFC payment thing since i got my GS3. Now, i can officially look cool infront of the cashiers, and show off to my sad friends who have an iphone
Great job.
if you want to go back to the original buildprop use the modaco fixed google wallet from the att forum.
and turn of automatic update for the google wallet in the playstore.
In that way you can go back to the original build prop when everything is installed.
Works perfect for me.
Thank you again
Downloaded patch, set to Galaxy Nexus. Installed Wallet from play store and it installed but says that "Google wallet is not yet available for your device or mobile network." Wonder if new version (Oct 3rd) looks to see what network you are on.
chewwy420 said:
Downloaded patch, set to Galaxy Nexus. Installed Wallet from play store and it installed but says that "Google wallet is not yet available for your device or mobile network." Wonder if new version (Oct 3rd) looks to see what network you are on.
Click to expand...
Click to collapse
Did you change your build.prop? The 3 different lines I mean and then rebooted?
if not you have to do that otherwise it won't work.
where can i find my buildprop file?
Looking with my root explorer but cant find anything called buildprop. I'm on liquidsmooth. Just looking for a little guidance. Thanks!
saytj1 said:
Been looking for this for a while
Thank You
Click to expand...
Click to collapse
joemagistro said:
So There are 2 JB TW roms posted on here that i see.. and after it becomes officially available, more roms will start to come out.. The old wallet fix for ICS WILL NOT work for Jellybean.. NFC will break and your phone will vibrate like crazy...
I dug through sprints latest leak and compiled a flashable zip file to make Google Wallet work... Tested on my end and it works!
The steps still apply from ICS versions
... open your buildprop in text editor and edit these fields..
ro product model ..... to -- Galaxy Nexus
ro product name...........to-- yakju
ro product device .......to -- maguro
save it...
Reboot into recovery... Flash the JMJellyBeanWalletFix.zip
reboot...
go to the playstore and download wallet....... You should be good to go..
Ignore the "unsupported device" message on the top... its saying this because the phone is rooted... everything works!
Click to expand...
Click to collapse
Tight job homie! Needed this to flaunt in my friends' faces....they have iPhones lol.
scottslc said:
Looking with my root explorer but cant find anything called buildprop. I'm on liquidsmooth. Just looking for a little guidance. Thanks!
Click to expand...
Click to collapse
Under /system folder.
---------- Post added at 10:16 AM ---------- Previous post was at 10:13 AM ----------
peterkef said:
Did you change your build.prop? The 3 different lines I mean and then rebooted?
if not you have to do that otherwise it won't work.
Click to expand...
Click to collapse
Ya, I was being stupid! missed a line.
thanks.
ok, i feel like a newbe goof but...
I found the build.prop file. I can open it but can't edit it. When I try my phone says it's a file system read only file. More guidance please...
scottslc said:
I found the build.prop file. I can open it but can't edit it. When I try my phone says it's a file system read only file. More guidance please...
Click to expand...
Click to collapse
You need to mount it as R/W.
In root explorer there should be a button at the top that says mount r/w.
Hello,
I've seen many threads implying that editing your build.prop file is simple, yet many other threads exclaiming that people have bricked their devices.
Has anyone successfully edited their SGH-T989/D phones to emulate the SGH-1337M? I have an odd reason, but I don't want to screw up.
Here is a link to the Galaxy S4 (I9500) build prop:
http://www.androidpolice.com/2013/0...gb-system-dump-leaked-and-ready-for-download/
Here is a link to the SIIx build.prop:
http://forum.xda-developers.com/showthread.php?t=1697142
How simple is this process? Which lines should I edit? What is your recommended editor app?
Thanks, I'd rather ask now than beg for solutions later.:fingers-crossed:
fishstick2k8 said:
Hello,
I've seen many threads implying that editing your build.prop file is simple, yet many other threads exclaiming that people have bricked their devices.
Has anyone successfully edited their SGH-T989/D phones to emulate the SGH-1337M? I have an odd reason, but I don't want to screw up.
Here is a link to the Galaxy S4 (I9500) build prop:
http://www.androidpolice.com/2013/0...gb-system-dump-leaked-and-ready-for-download/
Here is a link to the SIIx build.prop:
http://forum.xda-developers.com/showthread.php?t=1697142
How simple is this process? Which lines should I edit? What is your recommended editor app?
Thanks, I'd rather ask now than beg for solutions later.:fingers-crossed:
Click to expand...
Click to collapse
What exactly are you trying to do in the build prop to emulate the S4?
smokinjoe2122 said:
What exactly are you trying to do in the build prop to emulate the S4?
Click to expand...
Click to collapse
Maybe 'emulate' is the wrong word, but I am under the impression that I can swap the model number by changing the ro.product.model in the build.prop file. I want Google to think my SIIx is an S4 so I can access advanced apps that aren't optimized for my SIIx.
Here is a guide I found for simpletons like myself, but I just want to see if anyone else has done so successfully.
http://forum.xda-developers.com/showthread.php?t=1948558
I got impatient and changed the model number in the Build.prop and the phone did not brick. The System Settings on the phone does in fact confirm the updated model number as being SGH-1337M but the Play store hasn't updated the device yet so I can't confirm if my 'illusion' has completely worked.:laugh:
Get play store set correctly
http://www.howtogeek.com/116456/how-to-install-incompatible-android-apps-from-google-play/
looks like you done it all right except for the final step.
I changed my build.prop to make my LG L70 work with my Gear 2 watch. The watch got boring so I sold it, now I am looking to switch it back. I copied the original and tried to delete the modded one and it did not allow me. I tried to manually edit build.prop and it wouldnt save.
Any of you know how to revert?
Change permissions to rw
Sent from my MB855 using XDA Free mobile app
zzEvilGeniuszz said:
I changed my build.prop to make my LG L70 work with my Gear 2 watch. The watch got boring so I sold it, now I am looking to switch it back. I copied the original and tried to delete the modded one and it did not allow me. I tried to manually edit build.prop and it wouldnt save.
Any of you know how to revert?
Click to expand...
Click to collapse
yess...
if you have rooted your phone and then edited your build.prop with a change in android version....
then you have to root it again, and then go through the same process....
I am using "nickdollahz" 4.2.2 stock rom
http://forum.xda-developers.com/showthread.php?t=2407752
The snote was basically crashing and all I did was edit the build.prop to match the device
There was just a tiny error that threw the snote app off because it checks for validity
PLEASE MAKE NANDROID BEFORE TRYING!
I have only tested on "nickdollahz" awesome stock rom
Anyways just download and move over to /system/
Then change permissions to RW-R--R--
https://www.dropbox.com/s/11q1jmy10tedxo7/build.prop
These are the edits I made to the build.prop
ENJOY :laugh:
OLD
ro.product.name=kona3gXX
ro.product.device=kona3g
ro.build.description=kona3gxx-user 4.2.2 JDQ39 N5100XXCMH1 release-keys
ro.build.fingerprint=samsung/kona3gxx/kona3g:4.2.2/JDQ39/N5100XXCMH1:user/release-keys
NEW
ro.product.name=kona3gubro
ro.product.device=konagro
ro.build.description=kona3gubro-user 4.2.2 JDQ39 N5100XXCMH1 release-keys
ro.build.fingerprint=samsung/kona3gubro/konagro:4.2.2/JDQ39/N5100XXCMH1:user/release-keys
Not sure about this fix, but I did get the SNote app working and fixed version is up. Just wish it was reported sooner. I had no idea until today.
Curious where you get the 'gubro" & "gro though.
nickdollahz said:
Not sure about this fix, but I did get the SNote app working and should have a fixed version up soon. Just wish it was reported sooner. I had no idea until today.
Curious where you get the 'gubro" & "gro though.
Click to expand...
Click to collapse
Yeah sorry about late posting. I was eating dinner with my family when I found the issue and waited an hour after to find a cure. I got the "gubro" and "gro" from my older build.prop from a nandroid that I made from my purely stock 4.1.2.
This nfc fix is designed for 4.3 TW roms.
For older versions, see here: http://forum.xda-developers.com/showthread.php?t=1769083
Install Instructions:
Navigate to /system/csc
Open features.xml
Look for <!-- NFC -->, and replace that section with the following:
Code:
<!-- NFC -->
<CscFeature_NFC_SetSecureEventType>GOOGLE</CscFeature_NFC_SetSecureEventType>
<CscFeature_SmartcardSvc_SetAccessControlType>NONE</CscFeature_SmartcardSvc_SetAccessControlType>
<CscFeature_NFC_DefaultCardModeConfig>ESE</CscFeature_NFC_DefaultCardModeConfig>
<CscFeature_NFC_CardModeRoutingTypeForEse>ROUTE_ON_WHEN_SCREEN_ON</CscFeature_NFC_CardModeRoutingTypeForEse>
[COLOR="Red"]<!-- If you want the NFC icon in the statusbar add this line, otherwise remove it -->[/COLOR]
<CscFeature_NFC_StatusBarIconType>Att</CscFeature_NFC_StatusBarIconType>
Download file below
Flash file in recovery
Install wallet by following the instructions here: http://forum.xda-developers.com/showthread.php?t=2457569
Notes:
If you installed any other nfc fix, you'll need to revert back to your rom's "stock" system. Just flash your rom again.
This will work on either odexed or deodexed roms, as it will remove any associated .odex files.
Devs:
This is a modified Nfc.apk taken from a Sprint build.
Here's a rundown of what's happening:
NfcService looks at /system/etc/nfcee_access.xml and checks for the Google wallet signature.
It also looks at /system/etc/security_nfc_profile.dat for certain files and their sha-1. If it can't match the file with it's sha-1 it marks the system as tampered and will not allow access to the secure element.
This modified Nfc.apk will always return true when it looks at security_nfc_profile.dat.
To-do:
Create a script that will modify features.xml during install.
Download:
SGS3_4.3_TW_nfc_fix.zip
Report: I just installed wallet according to the new post of yours and it all went well. I'm on MBJ bootloader and also on yours att deodexed 4.3 Rom. Here's the screenshot:
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks works great and no pop ups.
Sent from my SGH-T999 using Tapatalk
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
cybok0 said:
Thanks works great and no pop ups.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
jeremyds45 said:
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
Click to expand...
Click to collapse
I dont think you would have any problems.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jeremyds45 said:
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
Click to expand...
Click to collapse
Yes, it will work fine
Sent from my SAMSUNG-SGH-I747
Thanks a lot for this, got it working good. Had to mess with it some, had some previous wallet files that needed to be removed and the like, thanks, I've always wanted to use tap to pay but never wanted to screw with the secure element
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Works great! Been trying everything in the Wallet thread for weeks and never got it working until now!
Sent from my SGH-T999 using XDA Premium 4 mobile app
Also, after I made the changes to the feature.XML file, I made a copy to my sdcard so I can just paste it should I have to reflash my ROM. Might not work if I upgrade or change my ROM, but if I bork and have to reflash it.
Sent from my SGH-T999 using XDA Premium 4 mobile app
does this fix work on att note 2?= running international touchwiz 4.3?
DeathEvil said:
does this fix work on att note 2?= running international touchwiz 4.3?
Click to expand...
Click to collapse
This is the s3 forums, I have a working zip for the note2, but androidfilehost is down right now. So here it is. I'll probably be making some threads soon.
I can finally upgrade to 4.3, just needed a working Wallet. Thanks so much for figuring this out!:laugh:
EDIT: Finally flashed to 4.3. This is what I did. I forgot to disable Wallet, so I did so through the website, wallet.com. After flashing I edited the xml file, then I booted into recovery and flashed the nfc fix. Then I downloaded and pushed the new .apk. When I booted up, the wallet icon did not appear in the notification bar. And after setting up, I have tap and pay not available. What went wrong?
T-Mobile SGS3, Stock rooted T-Mob 4.3, nfc fix from your thread and modded 2.0-R141-V14 .apk
EDIT: I just noticed that auto-upate is on by default in the playstore. I didn't notice any update, but I wonder if that's what did it. Never mind, somehow I got the wrong .apk.
EDIT: Turns out it was the old MD5 modem. I was on wifi the whole time after flashing and didn't notice I did not have a cell signal. Wallet tap and pay is setting up! Thanks!!!
Thank you very much for the work that went into this NFC fix and for the work that has gone into the modified Wallet.apk. I had forgotten to reboot after pushing the app to system/app and the tap to pay feature kept failing. As soon as I rebooted and tried again, it worked. The real test will come when I can actually make it to a store to test. Thanks again.
After I pushed the right .apk and flashed the right modem to get a cell signal, everything set up fine. Used it tonight and had to explain to someone who was so impressed he wants to buy a Nexus or a Sprint GS3.
loserskater said:
This is the s3 forums, I have a working zip for the note2, but androidfilehost is down right now. So here it is. I'll probably be making some threads soon.
Click to expand...
Click to collapse
This worked for my TW 4.3 Note 2
Thanks so much for this thread. I'm happy it give the technical nitty gritty details as well as instructions. Tap to pay is now working on my T999 running rooted stock 4.3.
will this work for a vzw sgs3 with isis as well? i have isis and wallet on my vzw s3 and both are working right now. but not when i upgrade to 4.3 so i've temporarily reverted back to 4.1.2
Does this has to be done on s4 running 4.3 rom?
Sent from my SCH-I545 using Tapatalk
Does this work on 1747m (bell) ? I'd love to be able to use wallet.
cnlson said:
will this work for a vzw sgs3 with isis as well? i have isis and wallet on my vzw s3 and both are working right now. but not when i upgrade to 4.3 so i've temporarily reverted back to 4.1.2
Click to expand...
Click to collapse
It should work, although I haven't tested or heard of anybody that has. If it works for you please let me know.
dseda86 said:
Does this has to be done on s4 running 4.3 rom?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No, this is in the S3 forums for a reason.
longjohnsteve said:
Does this work on 1747m (bell) ? I'd love to be able to use wallet.
Click to expand...
Click to collapse
Yes, it should work fine.
Sent from my SAMSUNG-SGH-I747
Well I got the lollipop at&t 4g lte icon product name from TEKHD and it works good and i noticed it also takes off the sfinder and quick connect.
If you guys wanna try it out you need build.prop and edit this two lines and reboot.
ro.product.name=trlteuc
ro.product.device=trlteatt
All I had to change was product.name=to trlteatt nothing else unless your on Canadian firmware
This has actually been posted and discussed before in several forums. You can also try
trltevzw - verizon
Trltespr - sprint
Trltexx - international
And a few more that I can't think of right now.
do I need to be rooted to do this? i tryed but it is read only.
Build.prop editor works best with root.
Is there a wat I can get the LTE icons and kill "ATT" like in Gravity Box. I'm on TEK rom and love it, but the carrier text tweak is not killing the "ATT"
One thing that tripped me up was the persistent gap in the layout. In a Doh moment I figured out it was the spot for the download booster ucin, typically shut off.
Working, thanks a lot. All i changed was product name too
Has anyone figured out how to get this to work on 5.1.1 roms?
blane3298 said:
Has anyone figured out how to get this to work on 5.1.1 roms?
Click to expand...
Click to collapse
x2 on it.....it seem that with 5.1.1 update it is not anymore possible to make these change.....
zxaz said:
x2 on it.....it seem that with 5.1.1 update it is not anymore possible to make these change.....
Click to expand...
Click to collapse
Along with the build prop edits you must also change the sale_code.dat file in the csc folder from tmo to att. Works on the latest Tek rom. I'm using one from a stock Att Rom, but editing the file with file explorer, etc..may work as well.
I'd like to see screen captures of the different logos....they may all suck? LOL
bigron77 said:
Along with the build prop edits you must also change the sale_code.dat file in the csc folder from tmo to att. Works on the latest Tek rom. I'm using one from a stock Att Rom, but editing the file with file explorer, etc..may work as well.
Click to expand...
Click to collapse
i can confirm that"s it work perfectly on 5.1.1 stock rom.......bigron77 your the man!! after 6 month you finally solve the mystery...lolll
zxaz said:
i can confirm that"s it work perfectly on 5.1.1 stock rom.......bigron77 your the man!! after 6 month you finally solve the mystery...lolll
Click to expand...
Click to collapse
Does changing these files have any effect on anything other than just icons? Would changing tmo to vzw affect any other things because of gsm/cdma differences?
on my side, i have a sm-n910w8 wich is a canadians version....it worked perfectly!! i alway liked to have the carrier id on the status bar (i"m a rare one i guess loll) it didn"t change anything about the gsm/cdma thing...
well....have installed marshmallow on my note 4......have tested to see if we still able to change the data icon...and onm my side on stock rom android 6 i"m not able anymore to change anything....i change the ro.product.name and the sale_code.dat and it change nothing???? somebody have tested it to see???
thanks.......
Is this possible with MM 6.0.1 n910t?
Sent from my SM-N920G using XDA-Developers mobile app
should have made an update since my last thread......i"ve marshmallow on my note 4...you can"t change the build.pro to have for example the at&t data icon since marshmallow is still not available for the note 4....this is why the build.pro change mod doesn"t work......
Well.....saw that att upgraded finally the note 4 to marshmallow....have made a trie to have the att data icon by the build.prop.....it didn't worked.....maybe i made something wrong?? Someone had succes to make the change?
Thanks in advance.........
mr pnut said:
Well I got the lollipop at&t 4g lte icon product name from TEKHD and it works good and i noticed it also takes off the sfinder and quick connect.
If you guys wanna try it out you need build.prop and edit this two lines and reboot.
ro.product.name=trlteuc
ro.product.device=trlteatt
Does this work for the new bootloader mm?
Click to expand...
Click to collapse
mbr007 said:
mr pnut said:
Well I got the lollipop at&t 4g lte icon product name from TEKHD and it works good and i noticed it also takes off the sfinder and quick connect.
If you guys wanna try it out you need build.prop and edit this two lines and reboot.
ro.product.name=trlteuc
ro.product.device=trlteatt
Does this work for the new bootloader mm?
Click to expand...
Click to collapse
it didn"t work on mine....stock marshmallow rom
Click to expand...
Click to collapse