Develop Bugs

[Q] Downloaded the Verizon Rom

Hey guys, I was putting a stock rom onto my phone and by my carelessness I had accidentally flashed the stock rom for Verizon. As a result I cannot access my phone as the phone tries to activate with Verizon which fails as I have a wind mobile SIM. I've been trying for hours to reflash the TMO rom but it always fails with the "unsupport dev_type" error. I do have clockworkmod on and I've been clearing everything before flashing and nothing has been working. I've been haunting the forums trying to find a solution but anything closely related hasn't been able to help. Please help!

My internet data frequently disconnected

Hello,
i am back again with a new problem!
All the previous problems that was mentioned in this forum is GONE. i was a happy owner. Until i got this problem.
so i wanted to try new Modem, just so i can increase my Signal, and right now, my data plan is keep going on and off, and most the time i can't get it connected it.
i did the wipe date /factory reset from the ROM manager, and wipe cache and dalvik. and yet the problem is not solved.
right now, am running cm-10.1-20130304-EXPERIMENTAL
and the Modem am currently running which sometimes works ( I747MVLDLK4 ) am with Rogers, Canada, Edmonton, AB
If anyone helped me out with this, your next coffee is on me! for real!

anyone?

When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.

CZ Eddie said:
When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.
Click to expand...
Click to collapse
Thanks man, i really hope it works! , am gonna try this now.. When i restore to the stock, dose my based band goes to default or shall i manually do that?

just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....

MH_91 said:
just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....
Click to expand...
Click to collapse
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?

hednik said:
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?
Click to expand...
Click to collapse
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.

MH_91 said:
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.
Click to expand...
Click to collapse
What type of fail error?
How are you trying to flash it?

i managed to make my modem into the stock version. However am just getting "E" in my data connection. Reminder am still in STOCK ROM and stock modem now. is that a good sign that i slighty getting everything back??
should i just install the CM 10.1 now and see the results or what you guys recommend?

annnnnnnnnd my " E" is gone.. Beautiful
do you guys think it might be a actual physical sim card issue?

UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!

Try flashing Task's AOKP and see if you have the same issue. Additionally, try deleting the current APNs (access point names) and manually enter the APN settings for your carrier. Could also just be a faulty SIM card as you mentioned.
Sent from my SGH-I747 using xda app-developers app

MH_91 said:
UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!
Click to expand...
Click to collapse
You have your imei still ? I don't see that mentioned.... this sounds like that issue. flashing between TW and Custom it can happen

Thanks guys for the feedback, but i have managed to fix the problem, this post was before i know that i lost my IMEI...
All good now, everything has be resolved.
cheers,

Okay, I need some serious help with my phone.

After running on a stock ROM(but rooted /w TWRP), I decided that I wanted to install a custom ROM so that I could tether if needed. Well, big mistake. I wiped stock and accidentally wiped my stock backup when going to flash a custom ROM and so far I've tried XenonHD, Jedi X19, IllusionROM, and now I'm on a Stock-Tweaked. So far, every single ROM has caused massive delays in receiving SMS messages and syncs from stuff like gmail.
Data is definitely working, and i've tried both the epc.tmobile.com and fast.tmobile.com APNs but my phone keeps hanging when it trys to send some texts and, if I have texts "waiting" to be delivered to my phone, I only receive them once I turn on my phone screen or only if the screen is on. So what the hell is going on here?

Don't mess around with roms and flash the stock-root injected one via Odin.

Download goo to install latest twrp and then download stock ROM for your device, wipe first 4 options not internal or external and not otg USB at least 3 full wipes then flash stock ROM and wait and you should b good

I installed the stock rom via Odin and still having this issue. =/

It seems that if I go to 4G/3G/2G mode only the issue doesn't persist. Or at least not as much. But then I can't use LTE! =/

Call tmobile tell him you did a factory reset on your phone and that you're having this problem and they will reset the network on their side. This happened to me before in the past and a quick call to them fix my problem. Hope this helps
Sent from my SGH-T889 using XDA Premium 4 mobile app

I just had the same exact issue in the Pittsburgh area. I had to replace my sim card and now all is well.
Sent from my SGH-T889 using xda premium

[Q] Can't send sms and greyed bar after cm 10.2

Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Edit: It's a sgh-t999v as printed behind the battery. I followed this guide http://forum.xda-developers.com/showthread.php?t=1775616 hence the reason why I'm coming from ICS. Looks like I'll have to reflash using ODIN which i was trying to avoid out of fear of bricking but it seems like my only option now.

kyuubie said:
Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Click to expand...
Click to collapse
Might not be the right ROM for your phone. Or it could be buggy. I've messed around with a few and finally found a great one that seems to be working well for me. I have the d2ltetmo. I'm running Liquid Smooth ROM with 4.2.2 and TWRP 2500 recovery. The ROM roots your phone as well. Any questions feel free to ask. Hope I can help!:cyclops:

I wouldn't flash D2MTR Rom to D2TMO. Too many differing things. There's a CM for D2TMO too.

Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk

serio22 said:
Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Well after a long process of flashing stock jb then finding a proper method of flashing cwm since i had difficulties with fastboot and went with the dd if-of method using the terminal emulator. I am finally on a stable cm 10.2 rom, d2tmo, where everything seems to be working and intact. Thanks for the advice now i have the long process of restoring my apps and data and what not with titanium backup.

Can't make calls out (Random only on network mode WCDMA/GSM (Auto Connect)

Hi.
I have a Samsung Galaxy S3 T999 model on carrier T-mobile. Lately the phone has gone nuts and will get stuck on dialing out and will never make the call. Everything else works fine. Sometimes I have to soft reset, pull the battery and that will fix it for a call or two, then it will get stuck again. I have contacted T-mobile about this over 5 times and none of them can help. We tried to change the sim, reset the account. Etc and nothing. I have reset the cache, factory reset and even put in a good working sim card from another phone and the same problem comes up. During my latest troubleshooting I have narrowed it down to where I switch "network mode" to GSM only and that can make calls out all the time, but the data stays on E (which then I can't use the internet because it's so slow) When I switch back to auto I am sometimes able to place calls again, but only a few. After I test a few calls and leave the phone for a few minutes the phone will get stuck back on not making calls out and just saying "dialing".
Has anyone had the same problems or know of a fix? Currently I have been trying to flash the modem to different versions to see if that fixes the problem. The first two modems I have flashed did not work and came up with "unknown baseband".
If anyone can help I greatly appreciate it.

This is a known issue with 4.3.. What firmware are you on? Assuming you flashed the correct baseband for your device, the 'unknown baseband' message sounds like you are in 4.3 but what build? You can't flash any modems successfully less than 4.3
Sent from my SGH-M919 using Tapatalk

serio22 said:
This is a known issue with 4.3.. What firmware are you on? Assuming you flashed the correct baseband for your device, the 'unknown baseband' message sounds like you are in 4.3 but what build? You can't flash any modems successfully less than 4.3
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I was previously on 4.1.2 when the problem first started. I updated it to 4.3 and still the same problem.
jss15j.t999uvuenc2 build. (I put this one back on last night so at least I can use the phone today when I am at work)
I was just hoping that the device didn't go bad when it was on 4.1.2 because it was working just fine before the problem started.

Was it official update to NC2 by OTA/Odin or you just flashed a ROM?
Sent from my SGH-M919 using Tapatalk

serio22 said:
Was it official update to NC2 by OTA/Odin or you just flashed a ROM?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
NC2 was OTA. After doing some searches it said that OTA could of been corrupt, so I went and downloaded KIES and did a reinstall that way.
When I upgraded to 4.3 I tried that default baseband out and had the same problems. That is when I was searching on google and came across this forum and also the thread about flashing modems.

What APN (Access Point Name) are you on ? Also what is your Preferred Network Type set to ? Its located in Settings > More I think.(I don't use Stock Firmware)

Perseus71 said:
What APN (Access Point Name) are you on ? Also what is your Preferred Network Type set to ? Its located in Settings > More I think.(I don't use Stock Firmware)
Click to expand...
Click to collapse
APN is epc.tmobile.com
Network Mode current set to GSM (the only way I can make calls out without the problem occuring)
WCDMA/GSM (Auto Connect) is what it should be on so my data is at 4G, but the calls is the problem here

I am not sure but can you check the settings of the Dialer to see if there is ways to choose Lookup providers ?

Perseus71 said:
I am not sure but can you check the settings of the Dialer to see if there is ways to choose Lookup providers ?
Click to expand...
Click to collapse
Nope don't see anything in the dialer about selecting a provider..

Its supposed to be something about Choose Lookup Providers. At least that's the way it is on AOSP.

I suggest Odin flashing the stock NC2 firmware and then factory resetting from stock recovery. (Backup first of course!) If it is still an issue, it will most likely be a hardware problem. From what you have said so far, I believe that you will find this to be the case. Could've been due to damage from a drop, or even overheating at some point. Or it could just be that its simply due to hardware degradation over time.