i have a att lumia 900 cyan. the phone is struck at the white screen at the startup after which the screen goes black with buttons at the bottom lit.. i have downloaded and installed the latest Nokia Care Suite and downloaded the required firmware files. when i start the recovery procedure (Programming >> Recovery >> start) it give the error
Recovery Failed
Error: No response received! Unable to verify response.
sometime it suggests to pull out the usb,power down the phone. press the up volume button and plug in to usb.
My Problems
unable to fully power down the phone. it vibrates and restarts,
even if i plug my phone to usb it still gives me the same error. kindly help me out
Sounds as if someone formatted the device using the very same Nokia Care suite, Not much you can do unfortunately.
Related
Dear all,
My Universal has been stuck in the bootloader screen after upgrade with DOPOD Rom. I have searched thru the threads but have had no luck so far. Has anyone out there experienced this? Please help me out
Thank you
Ken
STUCK RELEASE!?!?!
Well.very easy for start.
ROM Upgrade Failure
It is possible, in a very small number of ROM upgrades, that the upgrade could fail. The following are workarounds to get the device working and upgraded.
Device stuck in 'Bootloader' mode
When this happens the device screen will be blank except for the words:
Serial v 1.00a
The word [Serial] should change to [USB] when the cradle is plugged into the PC, and the version number below this will vary. When you get this screen, a soft or hard reset will not make any difference.
It is still possible to run the ROM upgrade file again, without using Activesync (Activesync will not restart anyway).
• Firstly unplug the USB cradle and reboot the PC
• Plug the cradle back into the USB port (this must plug directly into the USB port and not into a USB Hub / adaptor).
• Now run the ROM upgrade file again from the PC. This should just run as per normal and correctly reflash the device.
If it is still not working,try this
• Press & hold the power button
• Press & hold the Backlight button
• Push the stylus into the soft reset hole - until you see the word [Serial] on the screen.
• You should now be able to follow the upgrade process above for a device stuck in Bootloader mode.
It work for me,goodluck
henning
find an attachment how to fix this
Many thanks, HENNING RAS
My device is up & running again. Thanks
Ken
Ok, so this all started way way way back when I tried to update twrp (maybe back in august?) and well, after doing so there was no recovery and trying to boot it gave me a secure boot certificate error. Fast forward to today. I follow a guide located around here, flashed the files needed through linux and the phone seemed to be taking them. Well... now it won't turn on at all. Hooking it up in windows shows no sign of life, the phone isn't charging and just no general response from it. Any suggestions?
If its any help it was on a lollipop rom when all of this started.
I think you are stuck on qdloader 9008 mode connect your phone to your windows pc then hold the power button to see any response
No response from the phone. Just a nice black screen
NO i ment is that try connect the phone to the pc open device manager and hold the power and vol up buttons of course the phone wont turn on if it is in hard bricked state but it will atleast show its emergency download state on your device manager
Hi,
My phone : ZE550ML
When I tried to update the TWRP recovery I installed .img file then everything collapsed.
My phone was only booting in bootloader, even if I chose normal boot.
I tried to install another .img file and since my phone doesn't want to do anything. No asus logo, no usb logo, no color nothing.
When I press power button nothing happen however how long I press even with volume button.
I charged it for a day long then I tried like a lot of times this procedure : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 .
(Surprisingly when I connect my phone to my computer sometimes the xfstk software recognize it)
But I always get : FW+OS download did not complete because of limit reconnecting to device attempt number reached.
Does someone have any idea ?
hello I was trying to wipe cache data partition it took long time so i restarted the phone and from that moment my phone is just showing dead android with error blinking and my not able to go in boot options by holding volume + and power button and even tried to connect my phone to pc as soon as my phone us connected it switches on automatically and after asus logo it start blinking error.... i had installed intel usb android devices driver, isov android but still my phone is not deceted in device manger under isoc driver please help me:crying:
frkshw said:
hello I was trying to wipe cache data partition it took long time so i restarted the phone and from that moment my phone is just showing dead android with error blinking and my not able to go in boot options by holding volume + and power button and even tried to connect my phone to pc as soon as my phone us connected it switches on automatically and after asus logo it start blinking error.... i had installed intel usb android devices driver, isov android but still my phone is not deceted in device manger under isoc driver please help me:crying:
Click to expand...
Click to collapse
connect your device to pc. hold power button for 10 to 15 seconds so it turns off completely. then turn it on.
which operating system you are using?
please don't make needless thread. you could ask question in any guide available for unbrick
use the following guide. read everything carefully. and do step by step as suggested
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Hello
I unlocked the bootloader with this tut, then I want to install TWRP with this tut, but after the start of Odin I get an fail.
On the screen stand "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software".
The Smart Switch PC Software only gives me the notice that it cannot connect to the device.
Holding different buttons and plug the USB in, change nothing.
I don't get to the download service.
Throw it away? Send it to Samsung? What can I do?
Thanks
Potze said:
Hello
I unlocked the bootloader with this tut, then I want to install TWRP with this tut, but after the start of Odin I get an fail.
On the screen stand "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software".
The Smart Switch PC Software only gives me the notice that it cannot connect to the device.
Holding different buttons and plug the USB in, change nothing.
I don't get to the download service.
Throw it away? Send it to Samsung? What can I do?
Thanks
Click to expand...
Click to collapse
Let the battery drain completely. Then after the battery died plug it into a computer and press the buttom combinations for download mode for long consistently until it gets into download mode.
Then reflash stock rom at www.samfw.com
The back is open, so I unplugged the battery.
Then I plug it in and the same message appers. If i press first Volume down + pixby + power and then I plug it in, the message is the same. If i hold it, the device reboots and the message came again.