Related
There are many topics in this forum about screenprotectors and shield. That's why I decided to make one topic on this subject based on my experience. I've used protectors for the Xperia X1 and the HTC Desire, i've used the following:
Screenprotectors
Brando UltraClear My experience with the Brando's are very good. They are easy to install as they don't use glue, but some kind of static energy, I don't know what it is exactly. Due this, they can be reapplied by peeling them off and reapply them. And you can even clean them with water. This is also a disadvantage, as the protector can move a little around the screen and can be lifted up by sharp objects.
Color distortion due the brando is negligible and in my opinion the brando's have a nice feel to them, which is of course quit important for a screenprotector.
Ebay I've had some experience with these protectors, and while they are cheap, I'm not a big fan of them. They feel cheap and there is too much resistance while touching the screen. I also have my doubts about the protection, especially with sharp objects penetrating the protector, but I have no experience with that. Color distortion depends on how you apply the protector, I have seen some people with some vague lines on the screen due these protectors.
Martin Fields These appear to be the best protectors but I have no experience with them. Please post your experience so this can be a nice overview topic
Shields
StealthGuards This is the shield/screenprotector i use at the moment. The problem with shields is that over time, the small parts (in my case the side of the phone) tends to get loose. That happened to my Zagg shield which I originally bought for my Desire. Since I didn't want to spend $25,- again I browsed around the internet and found this alternative. They are incredibly cheap (Free + shipping, so around $2,-) and hard to beat at that price. The feel of the screenprotector isn't as nice as from the brando. But it's better then the Zagg and good enough for all day use.
The protection you get is very good, every part of the phone is protected by some plastic looking and feeling material. The StealthGuards offers the same protection as the Zagg, and scratches automagically restore as long as they aren't too deep. So you have a lot of extra protection without the bulk and at a low price. Disadvantage could be that your phone gets more glossy. For a matte phone like the desire this isn't something i'm happy about, but you can order matte shields for a small price (which I didn't btw, so I'm not sure how that will look). Also you can't reapply them as they use some kind of glue. Personally I didn't have any problems peeling them off (no glue left on the phone, or easily removable).
ZaggIs more or less the same as the StealthGuard, but more expansive. You do get 2 year warrenty and free replacement for that price, and I guess it's more scratch resistant but with normal use the SG is sufficient for me. I've scratched both with my keys and didn't see much difference. They have more resistance then the SG and I wasn't a big fan of using the Zagg as screenprotector so i ordered a Brando. Installation is better then SG, as SG doesn't even provide instructions or the installation fluid (but you don't need it really, I just pushed it on the phone and it sticked).
BSE is mentioned in this post and is also a cheaper alternative to Zagg.
Installation
For installation of your protector I recommand BillTheCat's excellent installation technique post that can be found here
Conclusion
On a low budget I recommend the StealthGuards, as they are dirty cheap, offer way better protection then the cheap ebay protections and feel better. If you have some more money to spend I would go for a SG + Brando UltraClear combination. This is primarily for the feel on the touchscreen, which I like a lot on the brando. Maybe the MF is better, but I can't recommend it as I personally never used one.
If you have a lot the spend you could look into the Zagg, but you will definitely want another screenprotector alongside the Zagg, which makes it even more pricy. I guess it's protection is better then the SG, but I doubt you'll need it.
This is all based on my personal experience I had with these products, yours can be entirely different and if so, please post it below. I will update this post if users provide useful descriptions on there phone protections.
Great post! A lot of useful information here for those looking to get a screen protector for their phone.
I only have experience with the Zagg Invisible Shield. I tried it on my old hero, and while it's a solid product I just couldn' get used to the way it felt uner my fingertips. I ended up removing it after only 4 days of use. That being said, when I recently retired the old Hero it didn't have a single mark on the screen. So, for me the screen protector from Zagg didn't do anything except lower the usability of my phone.
Sent from my Desire HD using XDA App
Nice post.... I got a nice HTC branded pouch from amazon for £7.50 ($12.20) and it's great.
amazon.co.uk/HTC-Pouch-PO-S520-smartphone/dp/B003HRZRCE/
timber4483 said:
Nice post.... I got a nice HTC branded pouch from amazon for £7.50 ($12.20) and it's great.
amazon.co.uk/HTC-Pouch-PO-S520-smartphone/dp/B003HRZRCE/
Click to expand...
Click to collapse
I don't like pouches, they add weight and slow the process of quickly checking my phone This one looks nice though
I've been using Martin Fields protectors for a few years now. Better quality than most and cut very well so that they cover the entire screen. Easy to apply without bubbles forming and can be removed without leaving residue on the screen.
One thing that i have noticed is a discoloration/wearing on the shield in the most frequently used areas of the screen. It's only noticeable when the screen is off though.
These are very costly compared to most but offer a good level of protection and last for ages.
DirkGently1 said:
I've been using Martin Fields protectors for a few years now. Better quality than most and cut very well so that they cover the entire screen. Easy to apply without bubbles forming and can be removed without leaving residue on the screen.
One thing that i have noticed is a discoloration/wearing on the shield in the most frequently used areas of the screen. It's only noticeable when the screen is off though.
These are very costly compared to most but offer a good level of protection and last for ages.
Click to expand...
Click to collapse
I heard the same story, since my protector is slightly damaged after 3/4 year of heavy use i'm thinking of buying one and check them out. How does the martin field feel compared to the original screen?
cyleo said:
I heard the same story, since my protector is slightly damaged after 3/4 year of heavy use i'm thinking of buying one and check them out. How does the martin field feel compared to the original screen?
Click to expand...
Click to collapse
I actually found the naked N1 screen a bit hard to get along with. My finger wouldn't swipe across smoothly and felt 'sticky'. The MF protector was actually an improvement although it takes a days use to wear in properly. I've had the same protector on for a year now and it's still going strong
i use a zagg and love it! goes on great but does feel funny something you just have to get use to the only bad thing i noticed is when i tried to put the one from my white streak on my black streak the screen was totally unresponsive so i had to get a new one bestbuy replaced it so no big deal couple of my friends had the same problem so i guess you can't use it more than once. it will mark up i dropped my streak and tried to stop it with my shoe and ended up kicking it across the room and it put 2 small marks on the zagg but other than that its great and i do recommend it. a little pricey though!
A very good alternative, actually better and a lot cheaper than Zagg, is BSE: http://www.bestskinsever.com/
I started using them on my last 3 devices and have never looked at another product since.
XPerties said:
A very good alternative, actually better and a lot cheaper than Zagg, is BSE: http://www.bestskinsever.com/
I started using them on my last 3 devices and have never looked at another product since.
Click to expand...
Click to collapse
+1 for BSE, I've used them on almost every phone since my BlackBerry days. I've tried others and keep going back.
The ShieldGuards are really good they might be better than zagg I recommend this
Invisible Shield from Zagg is always a good choich but a little bit pricey. They just recently released the universal screen pack to Radioshack so they should be available to you locally. Which is always ideal for me.
They price at 14.99 for three.
I have never tried bestskinsever, but I used Zagg a couple of times when it was still called Invisible Shield.
Is bestskinsever the same sort of product? That is, is it sticky to touch, or does the finger slide like it does on the screen?
Also, does the screen protector part have the orange peel effect, or is it mirror-like, like a normal screen protector?
The Zagg style protectors are fantastic for the body of electronics items, but imho very bad news for screens, especially touch screens.
Updated startpost with BSE. I will take some pictures of the Stealthguard installed on my device
Im thinking about getting a zagg. they just gave me a simple screen protector from verizon when i picked up my thunderbolt. definitely not going to cut it.
Updated OP with link to the installation technique guide from BillTheCat
Skinomi its good too! Easy to put on only sucky part is u have to wait 12-24 hours for it to dry (
Sent from a flashed CM7 myTouch 4g
winxx said:
Skinomi its good too! Easy to put on only sucky part is u have to wait 12-24 hours for it to dry (
Sent from a flashed CM7 myTouch 4g
Click to expand...
Click to collapse
Those are new to me. How do they feel and react to scratches?
bought my hd 2 with a screenprotector today and the protector is shining under the sun. can't see a thing.
It seems the StealthGuard is no longer free, however, for $10,- you get 2 protectors, so it's still very competitive when compared to the others.
Edit: There seems to be a workaround and still get the protectors for free if you sign up to become a devaffiliate. I haven't tried this myself (mine is still on), but it's worth a shot. (here or here)
Hello All,
We did a round of review giveaways for the Asus Eee PC Transformer a while back and we got some awesome reviews! We would like to do the same with the Samsung Galaxy S II Screen Protector.
Previous thread: http://forum.xda-developers.com/showthread.php?t=1273490 and http://forum.xda-developers.com/showthread.php?t=1278436
The materials are the same- imported high quality optical PET. These are just customized to fit the SGSII (i9100 version for now, we will be getting US carrier variants later on). This is a dry application screen protector.
This time we would like to see more comprehensive reviews. Something like this with pictures:
nxdelirium said:
Received mine the other day, and have had a few days to use the protector.
The following is my opinion. Screen protectors aren't for everyone, but personally I'd rather make a $20 'oops' than have to live with scratches. I don't see the harm in a protector, and in my experience they reduce fingerprints and glare like mad... so, do what you want.
Anyway, here's what I think of this protector:
Installation:
Handy set of instructions. Protector went on without any problems. I used a credit card as suggested to get rid of the air bubbles, which worked out very very well. This installation method is much much easier (and safer?) than Zagg, and similar to other adhesive-type protectors.
Fit:
The protector is cut slightly smaller than the size of the glass. My alignment was spot on, so I don't have any air bubbles around the edges, but there is probably a 1mm (or less) gap around the outside of the protector, which in my opinion is the perfect fit. The cutout for the front camera also is perfect.
Feel:
The protector offers minor friction for fingers. Initially my hands were very clean from the application process, and therefore were not leaving any finger prints. I have since used the TF for a few days, and even let a baby with greasy hands play with it, and the fingerprints/smudges were a minimum. In summary: the protector feels VERY GOOD and appears to cut down fingerprints like crazy. For me, this protector is better than just the glass, and much much better than the protector I had before (I had some 3 for $10 ebay style protector.. it was garbage). This protector is on par with Zagg protectors and their lack of fingerprints (for those who have used them).
Look:
Its hard to tell that there's even a protector on except for a few pieces of dust. Glare is reduced, colors don't seem to be affected. The protector I had before this one was much worse for letting the true colors through. Everything was faded and coarsened (dunno how to best describe that, but it looked bad). All in all, this one looks as good as no protector, with added benefit of reduced glare and minimal fingerprints.
Overall:
Most of my protector experience is with Zagg protectors; on a Nook Color, galaxy s and iPhone. I didn't want to have to fight with putting a Zagg on for a screen the size of the TF, so I have been looking for alternatives. If this protector is competitively priced then imo its one of the better ones for the TF. I once tried a skinomi for a G-tablet, and that thing was a complete waste of money.
Pending price, would get another one of these.
Thanks OP for the protector.
Keep us updated on their availability (I'll probably get another one).
Another question: would it be difficult to make one to fit a G-Tablet?
Cheers.
Click to expand...
Click to collapse
I will put in another piece of screen protector of your choice (another Samsung Galaxy S II, Asus Transformer (Eee Pad), iPad II, iPhone 4/4S, or HTC Desire) if you can post a video in the review.
I have limited quantities available for review and I will cover all shipping to the US and Canada. So PM me ASAP!
I will be listing the usernames of those receiving samples. Our last giveaway had too many people sign up for freebies and not provide feedback/reviews as promised. This is NOT the purpose of this thread. So far, the reviewers are:
1. joquio
2. XT69
3. antiochasylum
4. babadudu
5. Tyrol
6. tomqman
7. ratatouille
I'm in if you'll send to the UK? ill cover shipping if need be.
ill pm you my address
Sent from my GT-I9100 using XDA Premium App
I will pay for shipping via USPS First Class Mail. However, I'm not sure how long it will take to get to the UK. Seems like ~ 1 week.
If you want to get it sooner let me know what shipping method you would like.
chienb said:
I will pay for shipping via USPS First Class Mail. However, I'm not sure how long it will take to get to the UK. Seems like ~ 1 week.
If you want to get it sooner let me know what shipping method you would like.
Click to expand...
Click to collapse
Great Address sent, waiting for the protector
I can do this. I have previous experience with this type of thing. PM me if you still need people and are interested.
EDIT: I just realized this is for the I9100. I have the I777. Anyway, I've done a review for the Seidio Rugged combo and it's over at AndroidForums.com if you're interested. I also reviewed the ReEarthUSA Ringke case on AndroidForums. When you get the I777 model, feel free to contact me about a review. I'd be happy to do one.
Me too. I am in canada. PM me
Me too, I am currently in Hong Kong though. I can do a video review for you.
I can do a video review too .. I m in India if ur interested, PM me
i can help you with a review of my own too. PM me if you wish to send one to me.
I live in Greece thank you, we can talk about the shipping cost
I am also willing to write a detailed review, but I'm in Brazil. I'll foot the shipping costs if needed. PM if you are interested.
Im willing to write a deep review, Im from Serbia. I also have a scratch in the display - who knows, maybe with this screen protector it will be invisible. PM me if You interested.
Hey, I have some scratches in my screen aswell and would be willing to do a review. I live in norway, pm me if your interested!
I'll happily do a video review and a written review if needed. Living in the UK though. PM me if interested .
Sreen protector test
Hi guys!
I'm from Hungary with SGS2, and I would like to test a foil if it's possible!
I would write a test about it.
Thx!
Best regards,
Akos
Count me in, I live in Spain though. I´ll pay for shipping if needed.
I´m using an Ultra Crystal Clear atm so I would be able to compare them.
I just got the ProFilm for the SGS2 and put it on. Previously I was using Power Support's Anti-Glare, and I've also used SGP's Ultra Crystal before that (& a bunch of no name SPs in between). Since I've literally *just* put this on, I'll just give my initial impressions. I didn't take many photos beyond the initial opening of the package but I'll definitely do so in my follow-up.
Packaging: It came in an envelope via USPS First Class International. Inside was just a set of handy instructions and the screen protector itself, a no fuss affair. If/when this is on the market, I'd recommend bundling it with the standard microfiber cloth but since this is for testing & reviews, I'm not complaining.
Photo here.
Screen Protector: It came with 2 pieces of backing plastic, but there was no confusion whatsoever about which to take off first as they were labelled numerically and the instructions on the piece of paper was clear.
The screen protector is pretty thin but not to the point of being flimsy, though it's definitely thinner than the SGP Ultra Crystal and Power Support Anti-Glare, so I would assume it's a little lacking in terms of hardness. It's well-cut, with holes of the right size and at the right position for the speaker grill, front camera (U-shaped cut, not a circular cut) and home button. There's very little space between the edge of the screen protector and the chrome rim of the phone, perhaps 1mm or less. Very good fit. It's of a matte finish, designed to reduce glare under bright lights or the Sun. It's night time right now so I'll add on to this review after a few days re: glare and such.
Unfortunately, I'm not sure if it's standard or perhaps just the one that I got but I noticed micro-scratches on the screen protector after I'd applied it and I've only touched it with scotch tape and a microfiber cloth. You can't see it when the screen is on but if you scrutinise it from certain angles when the screen is off, you can definitely see it.
Application: Okay I'm not inexperienced with applying Screen Protectors (I've applied numerous times on my phone, my brother's HTC Sensation, my dad's Galaxy S Wifi 5.0 or the Galaxy Player as it's known in the USA, and so on) but this was by far the hardest I've yet to apply. This is in part due to the perfect cut of the screen protector; it took me a long time to align the SP well enough for the anal, OCD part of me to stop screaming in my head. While I am a fan of the fit, it does take quite a bit of effort to align it (or it could just be me).
Plastic backings come off easily, no fuss there. Bubbles are rubbed away easily as well, and any artifacts you may find trapped under the SP during application is easily removed with some tape. I didn't use a credit card or squeegee, just pushed it down onto the screen and it flowed on and stayed there easily. Very easy to apply (once you align it).
Usage: First thing I noticed after I turned the screen on was that this screen protector gave me more light and clarity than the Power Support Anti-glare I was using; it was obvious to me 'cause my eyes hurt from the sudden increase in brightness (no settings were tweaked, phone's always on lowest brightness). I would say that in terms of light passing through and clarity, it's almost as good as SGP's Ultra Crystal, which is a clear protector, not matte.
Touch-wise, though, I could feel a fair bit more friction compared to Power Support's AG; it definitely lacks the powdery smooth feeling I had there. I haven't played any games yet so I'll update again with more details. Just feels a bit squeaky right now.
Initial conclusion: The ProFilm seems to be trying to combine the best of both worlds in bringing the clarity of clear protectors to matte ones. (Sidenote: I'd love to have someone familiar with the 3M Estoc+ review this as well and compare them as this balance brings to mind the lauded Estoc+.) It's too early for me to judge yet, so I'll withhold doing so until I've had more time with this. But from my impressions, it seems promising!
Many thanks to OP for sending it to me all the way over here on tiny Singapore!
------------
Tapatalking to the beat on Galaxy S II.
^Nice Review
I'm still waiting for mine to arrive.
Don't worry about pictures. I'll take care of that part
I have the Estoc. Problem is, even after more then a month, it's still not "ruined" yet. Not as clear as the day I first applied it (now with some microscratches) but nothing severe enough that I'd wanna take it off.
So, I can't risk taking it off to test this lol (I might ruin it, and the Estocs ain't exactly cheap).
But if the TS has a Profilm cut for the iPhone 4 (or the BB Torch, which has crap protector choices really), I'll be glad to try and compare.
only USA and Canada ? (
Romania wants to test this aswell
Thank you Tyrol for the indepth review
Packaging: It came in an envelope via USPS First Class International. Inside was just a set of handy instructions and the screen protector itself, a no fuss affair. If/when this is on the market, I'd recommend bundling it with the standard microfiber cloth but since this is for testing & reviews, I'm not complaining.
Photo here.
Click to expand...
Click to collapse
All the units I've sent out are samples. We will be including the microfiber cloth in the retail package for sure. A thin but sturdy cardboard piece will be used to prevent package from being bent. Screen protector will be wrapped in a clear biodegradable plastic bag. All texts will be printed with soy ink.
Unfortunately, I'm not sure if it's standard or perhaps just the one that I got but I noticed micro-scratches on the screen protector after I'd applied it and I've only touched it with scotch tape and a microfiber cloth. You can't see it when the screen is on but if you scrutinise it from certain angles when the screen is off, you can definitely see it.
Click to expand...
Click to collapse
Make sure to peel off both sheets labeled 1 and 2. The actual protector is wrapped between them. Unless it's a manufacture defect (unlikely as I manually inspected them before mailing), the screen protector should provide ample protection against pretty much everything. I redid the stress test with different sharp objects, really scratched and drilled hard with scissors. You can see the slideshow here: http://www.slideshare.net/chienb/profilm-2-layer-protection-covers.
Usage: First thing I noticed after I turned the screen on was that this screen protector gave me more light and clarity than the Power Support Anti-glare I was using; it was obvious to me 'cause my eyes hurt from the sudden increase in brightness (no settings were tweaked, phone's always on lowest brightness). I would say that in terms of light passing through and clarity, it's almost as good as SGP's Ultra Crystal, which is a clear protector, not matte.
Touch-wise, though, I could feel a fair bit more friction compared to Power Support's AG; it definitely lacks the powdery smooth feeling I had there. I haven't played any games yet so I'll update again with more details. Just feels a bit squeaky right now.
Click to expand...
Click to collapse
This series is finished in matte but preserves the transmittance and clarity of a "clear" type. I believe this is the best type of film for screens. Personally, clear types were too bright with factory settings and PROFILM's matte finish tones it down a little bit. Here are the specs, a few % deviation for different products:
Haze: 6±2%
Luminosity/Transparency: 94±3%
Material: High Quality PET
Thickness (µm): 50µm/100µm
Still waiting on more reviews...
I know there is a thread made on the 16th that basically touches on this question, but doesn't really answer it. I work for Apple and have fallen in love with the Power Support screen protectors. The only problem is they are only available for Apple devices. I've done a lot of searching for a close alternative with no conclusive results. I was going to go with an SGP Oleophobic but a little more research has me thinking that I'll be disappointed. SGP's Ultra Crystal line seems like it could be close but they aren't available yet.
Can someone who has experience with Power Support protectors tell me if there is anything that comes even remotely close? I don't care if its wet or dry install, I just want it to look/feel/function similarly.
EDIT: If you are thinking of replying with "haven't you seen the 'key scratch test?'," or "I don't like screen protectors on my phones, why do you?," or anything that doesn't have to do with the question, don't bother responding. I'm not wondering "if" I should get one, so there is no need to respond like I am.
Thanks
Screen cover is not nacessaire because it is easy to replace the old display with a new one.
Anyone?
nadejo said:
Screen cover is not nacessaire because it is easy to replace the old display with a new one.
Click to expand...
Click to collapse
What a terrible comment. Not only is it NOT easy to replace the screen, it's not going to be cost effective at all. You could buy 50 screen protectors and still not be close to the same cost as replacing the screen.
Sorry I have nothing positive to contribute OP. Hope you find what you are looking for.
Sadly OP, I dont think you'll find anything near the powersupport quality. I work for a certain someone too, putting on at least 15 powersupports a day for no extra charge (perfectly, I might add) and I absolutely love the finish it gives the iPhone.
After 3 days of no screen protector, I finally went to a VZW corporate store today and splurged on the 3-pack of crystal clear protectors. The value was pretty good, 3 great protectors for only $13 (around $8 with a corp. discount). They are not antiglare (I hear those for the GNex suck), but they definitely are not very noticeable.
My only gripes are that the protector does not go all the way to each side (which is not vzw's fault, and is easily remedied by a case) and the fact that it causes an extremely slight rainbow if the phone is tilted at a 80 degree angle or so. But then again, whenever i use my phone its at a straight angle to my face, so i never notice it unless i'm trying.
Hope it helps
I've extensively used Power Support films for my Apple phones and am a big fan of the clear protectors. I've used SGP as an alternate for my Android phones and have also used a few of their films for iPhones. I feel like the general film quality is comparable between SGP and Power Support, although I do prefer Power Support. In my experience, the Ultra Crystal is the closest product that SGP has to the Power Support clear films. I have used the Ultra Oleophobic, which I think is also close, but does seem to have noticeably increased friction over Power Support. Despite what you might think, I find that the oleophobic have an odd tendency to keep certain smudges and can require a little effort to get completely spotless. I usually use a microfiber cloth to wipe mine.
I am currently using an Ultra Oleophobic screen protector on my Galaxy Nexus. As has been noted on other threads, it does not cover the entire face of the phone. Although I mentioned a few of the negatives that I perceived in the film, I am still generally happy with its performance outside of the reduced size. To me, the quality of the film itself is markedly better than that of cheaper alternatives.
Although I cannot personally vouch for it, the reputation of Martin Fields is that they produce screen protectors comparable in quality to Power Support. They appear to now carry a product for the Galaxy Nexus front face and rear camera lens. My anecdotal experience with the company has been that I placed one order with them but never received the product. I never tried them again. I know that some reputable third-party resellers, like Expansys, carry their products and you may have better luck with them than shopping direct.
I believe that Power Support, SGP and Martin Fields all use similar Japanese produced base film material.
I have never used a wet film so I cannot make a comparison.
As an aside, the only instance in which I prefer SGP to Power Support is for their matte films (which I generally do not care for.) I find the Ultra Optics to be a better matte film than the Power Support anti-fingerprint film. I have used both on iPhones.
I like the powersupport protectors too. Always used them on my wife's iphone 3g and i was pissed when every apple store within 50 miles of dallas was out of them when we got her new iphone 4. I settled for an ifrogz they sold at the att store and she likes it just as much. Problem with my GNex is i have yet to find a dry apply protector that properly fits the curved screen. I have a Zagg on currently but i hate it....way too much orange peel. I also have a clear-coat and an sgp flex that were delivered today. They both appear to have less orange peel than the zagg but i havent tried either yet. Still....none compare to the powersupport. Bummer.
Thank you all for the replies. It sounds like I probably will end up giving the SGP Oleophobic a shot and seeing how I like it.
Just got my GS3 a week ago and I love everything about it so far. However, I'm starting to think I'll need a screen protector for it. Just for convenience I searched on Amazon and came across Tech Armor's screen protector. It has good reviews but other than the reviews on Amazon haven't been able to find more information about it.
Has anyone tried this sp out yet to get some insight from? Doing research on others but interested in learning more about Tech Armor products.
I literally just applied one. It went on fine. Just FYI - it does not cover the entire screen. It's edges are trimmed to the home button and top cameras and span a millimeter or so past the screen to either side. I'd definitely use it again especially as the 3-pack is under $10 shipped.
i was looking at those too... i was initially impressed with the reviews but then realized this was the only product those people ever reviewed.
Maybe i'm just jaded but 6 5 star reviews by people who've never reviewed anything else seems a little fishy to me.
Great to hear! Have you heard of the SGP curved crystal that's going to be coming out soon? Wondering if I should wait for that or try this one out.
NaaHLA said:
Great to hear! Have you heard of the SGP curved crystal that's going to be coming out soon? Wondering if I should wait for that or try this one out.
Click to expand...
Click to collapse
I ended up ordering both the anti-glare and the clear, but i don't have the sgs3 yet. Has anyone else tried the techarmor? I might just return them if I did get screwed by the 10 amazon reviews....
I have the HD clear one from tech amor and it works great....doesnt affect screen quality at all and easy to apply, comes with three screens and a lifetife warranty so you cant go wrong!
MMontanez347 said:
I have the HD clear one from tech amor and it works great....doesnt affect screen quality at all and easy to apply, comes with three screens and a lifetife warranty so you cant go wrong!
Click to expand...
Click to collapse
Ok, well I guess I'm only out the $14 if they are terrible. I will post my discoveries once I get my SGS3.
it's good
I purchased the Tech Armor anti-glare and anti-fingerprint screen protector from Amazon for ~$10. It was really easy to apply and it does the job. My only gripe is that it degrades the screen quality by a little, but it was worth the $10.
I have this and it's a good screen protector. You get three which is good but some of my corners are starting to peel a little.
DarkManX4lf said:
I have this and it's a good screen protector. You get three which is good but some of my corners are starting to peel a little.
Click to expand...
Click to collapse
are you using the clear or the anti-glare?
What's the point of screen protectors with Gorilla Glass? I mean the screen won't scratch, it will shatter, which a protector won't stop. So, what's the point?
Don_Perrignon said:
What's the point of screen protectors with Gorilla Glass? I mean the screen won't scratch, it will shatter, which a protector won't stop. So, what's the point?
Click to expand...
Click to collapse
It's still glass and it still is most certainly prone to scratches, scuffs, nicks, dings, and dents. Honestly, I can sleep more sound at night knowing I have just one more layer of protection on my $600+ device.
For the record, my girlfriend purchased these screen protectors for her S3 and she is extremely disappointed with how much the protector cuts down on vibrant colors and light from the screen.
I bought these anti-glare/anti-finger print ones that come in a 3 pack for about $10. I think they are ok as far as fit and stickability goes, but imo they make the beautiful screen turn into a fuzzy rainbow blurry piece of crap. I am returning mine and buying something else. I've only seen one other phone that had a screen protector looking this bad.
reidage said:
are you using the clear or the anti-glare?
Click to expand...
Click to collapse
I have the clear. It's good. Like other clear screen protectors oil, smudges, and fingerprints will show up.
FYI, for anyone interested, I wrote this review on Amazon. I'm not usually one to write reviews, but I felt I had to because of how it makes the screen look.
Tech Armor Screen Protection
NaaHLA said:
Just got my GS3 a week ago and I love everything about it so far. However, I'm starting to think I'll need a screen protector for it. Just for convenience I searched on Amazon and came across Tech Armor's screen protector. It has good reviews but other than the reviews on Amazon haven't been able to find more information about it.
Has anyone tried this sp out yet to get some insight from? Doing research on others but interested in learning more about Tech Armor products.
Click to expand...
Click to collapse
Hello, this is Tech Armor. At the time this post was written we had just launched product on Amazon for the Samsung Galaxy SIII. We are currently the #1 brand on Amazon for protecting the Samsung Galaxy SIII thanks to your support. We do our best to provide stellar customer service paired with a quality product. We offer a lifetime product replacement warranty on every product we sell, and we stand behind it. If any forum members want to review our products, please contact us and we can send out evaluation samples.
The Samsung Galaxy series including the Galaxy Notes ( I use a Note II) have curved screens with a beveled edge, which makes applying a stiff screen protector a challenge, but we have developed a solution with a thinner, more pliable material. We also leave a 2.5mm clearance gap around the beveled edge to prevent peeling. If you really clean the screen well and center your screen protector in the installation, it will stay on for a long time and protect your phone from daily wear and tear and the abrasions we encounter as part of our daily lives.
We offer the protectors in two finishes, the High Definition Clear and the Antiglare/Antifingerprint (Matte) Finish.
The Matte Finish product has 3 main benefits:
Reduces Glare
Reduces Fingerprints and Smudges
Has a soft feel/touch (Often preferred by gamers and power users)
However, you do sacrifice some clarity for these features and it is not for everyone. If a user buys this product and does not like it, we offer to exchange it for the High Definition clear model.
Please visit our website for more information.
All the best,
Tech Armor Support
---------- Post added at 10:55 AM ---------- Previous post was at 10:50 AM ----------
Cr3amy,
I noticed your post, and albeit quite late, I wanted to respond to you as I just discovered the Xda site. I hope you monitor it so we can assist you.
We are sorry you are unhappy with the Matte finish of the anti-glare/anti-fingerprint screen protectors. All Tech Armor Screen Protectors use the highest quality Japanese PET Film available and we use 100% Bubble Free adhesives.
The Matte Finish product has 3 main benefits:
Reduces Glare
Reduces Fingerprints and Smudges
Has a soft feel/touch (Often preferred by gamers and power users)
However, you do sacrifice some clarity for these features and it is not for everyone. The last thing we want is an unhappy customer, so we will gladly send you a replacement pack of 3 High Definition Clear screen protectors at no cost to you.
Simply email us at customerservice with your order number and we will ship them out to you via USPS First class immediately.
We offer a Lifetime Replacement warranty on all of our products and we stand behind it. We will take care of your issue to your satisfaction and if not will gladly refund your full purchase price.
Please visit our website and read the pro tips and watch the installation video to get the most out of your screen protector investment.
We won’t rest until we can make you a satisfied customer, just give us the chance!
All the best,
Tech Armor Support Team
I think all anti-fingerprint screen protectors reduce the display quality. I believe the matte finish that reduces fingerprints is slightly raised throughout and the lack of a smooth finish is what reduces the fingerprints but at the same time reduces the screen quality. I used Steinheil anti-fingerprint screen protectors on my Captivate and I was more than willing to compromise the screen quality for the lack of fingerprints. I couldn't find them for my S3 so I ordered the Tech Armor ones which will arrive this coming week. I don't watch videos/play games so I'm no doubt not as critical of the screen quality as someone that does.
Unless you're one to constantly clean your screen IMO the fingerprints reduce the screen quality way more than the anti-fingerprint protectors. My Captivate rarely needed the screen cleaned (virtually zero fingerprints) and I'm hoping the same is true for the Tech Armor protectors. When I'm in the field using an Excel spreadsheet with a client I don't want to have to constantly clean the screen so they can clearly see it. I'll settle for little/no fingerprints and the ability to see the screen albeit at a reduced quality every time.
Based on this review. I grabbed one ff these kits from amazon and installed today. Very pleased with the product and installation was a breeze.
Wouldn't know about those. Had one of those cheapo 3x for $1 off ebay and have nothing really bad to say about them. Also got them replaced later by the one that came with my UAG urban armor case and i find it slightly better, specially when applying. Just not sure if it's worth the difference.
Anyway, it's good to see that tech armor has great customer support that will even bother to reply here in xda. That's something most companies overlook and i'll easily pay extra for.
I've made a review on the iPhone 5 Tech Armor HD screen protector and I wanted to share my experience here. I've only used ZAGG and Ghost Armor before I've tried this and I must say that I prefer Tech Armor much more over those 2 brands. The feel of the screen protector is much better and when I give my phone to other people to use, they don't even notice the screen protector is there. So the quality of the screen protector is there.
On top of that, I noticed some imperfections on the screen protector, it seemed that there were some small scratches on the protector itself and it started to peel a little. I informed Tech Armor of my problem and they sent me 3 more for free. So customer service is also there when it comes to Tech Armor.
I've never purchased Clarivue or SGP before so I can't comment on the clarity/feel versus those two brands, but if anyone has input on that, I'd be interested to hear what it is. I found this thread by searching Tech Armor and there doesn't seem to be many forum posts on this company and I'm currently in the market to see what screen is the best for my Nexus 4 (I know this is the S3 thread).
BestSkinsEver Samsung Galaxy S2 T989 Total Body Skin Review
I know our phone is more than a year old now, I am writing this review as there doesn't appear to be any particular review of the skin for our phone (in this case, it's better late than not at all). The review is based after two weeks of usage so that I can provide as accurate information possible.
*to view a larger image just click on the thumbnail*
Delivery and Packaging |10/10| :
The skin was ordered from the BestSkinsEver website so it was shipped directly from their main facilities. Living outside of the US I had to choose the 'First Class Mail' shipping method which was $3.00CDN. The delivery arrived in my mailbox exactly 7 days after ordering just as advertised, no complaint. The skin came packaged in a white #10 sized envelope, nothing fancy, this is beneficial to the shipping cost and is eco-friendly (the skin is what matters the most). There were no damages (folds/tears) on the envelope which was great. Included inside the envelope is a packing slip with your shipping information, order info, etc... and most importantly the skin which is protected on some sort of vellum paper (protects adhesive side).
Pricing and support |10/10| :
Depending on the time you see this review, the price and availability of the skin may be different. I purchased the skin during a 30% off sale, however, even without the discount the total body skin is affordable (less than $10) compared to similar skins from other companies.
As for the BestSkinsEver support, they have provided outstanding customer service from my experience with them. I had an issue where I found a small gash right in the center on the adhesive side of the screen protector during installation. I had contacted the company with the issue and provided them with several pictures and they were able to quickly send me a replacement screen protector free of charge.
Application |8/10| :
It is a wet application, so I had to prepare a homemade solution of liquid soap and water inside an empty Monster ScreenClean spray bottle. I prefer the idea of making the solution myself rather than having the company charge an extra cost for their own solution. Instructions for the application is given on the website and after following the video applying the skin was a breeze. The overall procedure took me more than half an hour (could be quicker) but I was trying to be a perfectionist. Since it is a wet install, it made aligning the skin easy as long as you sprayed enough of the solution (don't be afraid to be generous adding solution, just make sure you wipe off any excess that come to the edges). Also, it is important to keep your hands moist with the solution at all times during application so that there is no friction between your fingers and the skin.
The only difficulty that I came across during the application was getting the side skins installed, particularly around the corners. Patience is key, I held the corners down in place with my fingers and I used the heat of my breath to help the adhesive stick. After doing so the side skins were flush with one another perfectly around the sides, top and bottom of the phone as shown in the provided pictures. I would also like to mention, the skin for the back of the phone leaves some sort of texture in certain areas due to the grid pattern on the back cover (this is metioned on the website). However, after some trial and error I was able to remove most of the texture and even with a bit of it left it looks pretty cool, almost like a camouflage pattern.
After applying the skins I used a gift card double-wrapped with a microfiber cloth to push away air bubbles and wipe off any leftover solution. At first it will still look like some of the solution is still under the skin no matter how much you try to squeegee it out, but after using the phone for 24-48 hours the solution disappeared/evaporated and the skin protector looked flawless (as if it weren't there at all).
Screen Protector Quality |9/10| :
First off, the screen protector is cut perfectly to fit edge to edge of the glass which is quite amazing. The cut-outs for the camera and earpiece are placed appropriately and are close to accurate. The cut-out for the earpiece however could have been cut closer/smaller so that the top part would adhere properly and not move as easily (not that great of an issue).
The feel/texture of the screen protector after the application felt somewhat rubbery, but after more than a weeks use with the phone any friction by the screen protector began to smooth out (even after wiping any oil marks off the screen). Speaking of oil marks, the protector does not easily attract fingerprints unless your fingers are extremely oily and when there are fingerprints, it's hardly noticeable at all (almost as if there is an oleophobic coating). Any fingerprints on the protector literally comes off with a single wipe of a cloth. When it comes to scratches the screen protector is more than decent enough to prevent everyday scratches from loose change and keys, but definitely isn't a guarantee. Any minor scratches disappear due to the self-healing properties of the skin.
The best attribute with this screen protector is that it retains the clarity of the screen while it's on. There are no issues with any brightness loss, rainbow affect, color tint, grainy look... nothing! The screen protector is crystal clear... the only flaw is that at certain angles where harsh light is hitting the screen there is a noticeable orange peel effect/texture, although it doesn't really degrade the clarity and is not visible with the screen on.
Body Skin Quality |8/10| :
The body skin for the phone is perfect for anyone who does not want the housing of the phone to get scratched. The cut-outs for the headphone jack, usb, buttons, camera and microphones are cut extremely precise. The back cover is cut edge to edge, it's only the speaker cut-out that is ever so slightly off center. Also, the side protectors are cut perfectly to not leave any space between... downside, there is about a millimeter of vulnerable space between the side and the back due to the curvature of the sides. The feeling/texture of the body skin has the same slickness as the screen protector, although it provides a better grip compared to the raw feel of the phone, particularly the sides. As for protection goes, the body skin will definitely hold up against any scratches from everyday items as it has the same self-healing properties as the screen protector. The body skin is thin enough to maintain the sleekness of the phone. The trade off is if you are looking for any drop protection, the skin is not thick enough to absorb any impact.
Overall |9/10| :
The BestSkinsEver total body skin in my opinion is the "best skin" in respect to it's notable quality over it's affordable price. The skin is easy to apply and for everyday use, it's more than enough protection while keeping the phone's sleek form factor. The skin in particular is made extremely well with all the precision cut-outs and the screen protector definitely keeps the quality of the screen. Overall, it works great for what it's designed to do and I definitely recommend this for anyone looking for an affordable option to protect their Samsung GS2 T989.
There's a possibility that I get complaints such as the review being rather long for some people... if it's a lot to read, just read the "overall" or just don't read it all. Since it's a review, I believe it's better to give any necessary information.
Additionally, I bought myself a Diztronic case and a Sandisk 64 GB Micro SD card. I can write a review for them as well if anyone would like me to and if anyone knows any other products you would recommend I get, let me know. Thanks!
thanks man im thinking of ordering tomorrow or ill just use this with my d3o case
Great review, FineTalent! You might not be an All-Star Dev yet but you're definitely an All-Star reviewer lol.
Great review, this product is exactly what I've been looking for. Thanks a bunch!
Posted from my Galaxy S II X.
FineTalent said:
There's a possibility that I get complaints such as the review being rather long for some people... if it's a lot to read, just read the "overall" or just don't read it all. Since it's a review, I believe it's better to give any necessary information.
Additionally, I bought myself a Diztronic case and a Sandisk 64 GB Micro SD card. I can write a review for them as well if anyone would like me to and if anyone knows any other products you would recommend I get, let me know. Thanks!
Click to expand...
Click to collapse
nice review!! I got my phone yesterday and I'm planning on buying the same case as you. do you mind making a review for the other stufff you mentioned??
I'm so glad you posted this review. I actually purchased this skin a few weeks ago. I had planned on putting a review up myself, but I got lazy .
My initial attempt to do this ended in a blaze of anger, resulting in my crumbling up all the pieces, and tossing them in the trash. The next morning, I saw one of the side pieces on the floor, and thought I'd give it another shot. Unfortunately, all the pieces were kinda stuck together. I figured out that the soap I was using to apply the films was a moisturizing soap, with kind of a waxy feel...pretty foolish on my part. Anyway, I carefully pulled the films apart (whilst watching a movie, because it was a looooong process), and used a different soap for the mixture. End result: glossy white protection film all around. Great product, great price.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app