I'm not at all a fan of cases but there are some instances where I go to events or I'm doing something where the phone has a much higher probability of taking damage.
The only cases I like are the bumpers, but only the really slim ones that don't add much or any bulk to the phone.
Are there any super thin, barely there, bumpers for this phone? I haven't been able to find one yet.
And by bumper I mean that there is zero coverage on the front or back of the phone. I could care less about the back's coverage.
PS, the Poetic doesn't seem thin enough, and that IR blaster issue as well.
Syn Ack said:
I'm not at all a fan of cases but there are some instances where I go to events or I'm doing something where the phone has a much higher probability of taking damage.
The only cases I like are the bumpers, but only the really slim ones that don't add much or any bulk to the phone.
Are there any super thin, barely there, bumpers for this phone? I haven't been able to find one yet.
And by bumper I mean that there is zero coverage on the front or back of the phone. I could care less about the back's coverage.
PS, the Poetic doesn't seem thin enough, and that IR blaster issue as well.
Click to expand...
Click to collapse
imho, bumpers don't add all that much protection. The back is still open to dents/scratches, due to the curvature.
Sorry it doesn't exactly answer your question, but just sayin'. ^^;
M_Woody said:
imho, bumpers don't add all that much protection. The back is still open to dents/scratches, due to the curvature.
Sorry it doesn't exactly answer your question, but just sayin'. ^^;
Click to expand...
Click to collapse
I understand, but I am not at all concerned with the back getting scratched. The One is weakest at it's edges and can take more of a beating on it's backside.
I'm using this right now kind of a bumper with a hard plastic back. pretty thin overall doesn't add much size to the phone at all.
http://www.amazon.com/Cimo-Hybrid-H...&qid=1367434012&sr=1-24&keywords=htc+one+case
tbae2 said:
I'm using this right now kind of a bumper with a hard plastic back. pretty thin overall doesn't add much size to the phone at all.
http://www.amazon.com/Cimo-Hybrid-H...&qid=1367434012&sr=1-24&keywords=htc+one+case
Click to expand...
Click to collapse
Do you think it would be possible to remove the back part?
tbae2 said:
I'm using this right now kind of a bumper with a hard plastic back. pretty thin overall doesn't add much size to the phone at all.
http://www.amazon.com/Cimo-Hybrid-H...&qid=1367434012&sr=1-24&keywords=htc+one+case
Click to expand...
Click to collapse
would you willing to take pictures for it and on the phone please, only one pic in amazon
here is an option: http://www.dracodesigninc.com/ProductDetails.asp?ProductCode=DRHO1A1-BK
not super thin, but it is the best i have been able to find thus far
chronsbons said:
here is an option: http://www.dracodesigninc.com/ProductDetails.asp?ProductCode=DRHO1A1-BK
not super thin, but it is the best i have been able to find thus far
Click to expand...
Click to collapse
It would be fine if it didn't have such a RIDICULOUS design, lol.
Related
Just a quick review of one of the better cases that I have come across...for those who dont like TPU and soft cases were the lip around the screen would easily peel back, and dont feel like actual part of the phone...Seems to be the only option was to run with no case, or them clip on cases.
The Momax UltraThin is the best case for myself at the moment, offering all that I am after, a phone that is still slim, protects it from minor scratches...I admit, not much drop protection but then, even thicker cases dont always promise absolute protection.
Anyways, the case is well lipped, accurate and precise, the holes for the buttons are well placed and shaped, overall very easy, as if there was no case on. The camera hole is well flushed to the camera itself.
Most of all this case actually clips on very tight and firm, just the way I like it...there is no give or any gap or loose points like TPU cases or SGP Neos...its just a firm case, that makes you feel like you are holding onto a phone without any added bulk...
Plus, the paint job on it is absolutely stunning...pretty flawless, high quality product...for a fair price...Ill let the photos do the talking...
Cheers.
Nice and simple case. The price seems cool too, thanks for sharing the product, I'll have a look at it!
Looks very nice. Where did you get it from?
plisk3n said:
Looks very nice. Where did you get it from?
Click to expand...
Click to collapse
I got mine on Ebay, shipping took about 1 week to New Zealand which is as slow as things get...
Also, is the material on the inside part of the case metal? I'm afraid it would scratch the plastic on the back of the phone if there's any rubbing.. ?
plisk3n said:
Also, is the material on the inside part of the case metal? I'm afraid it would scratch the plastic on the back of the phone if there's any rubbing.. ?
Click to expand...
Click to collapse
It is plastic, very smooth so I do not think it would scratch at all unless there is sand or other small hard particles between the case and phone.
What is different from other mesh cases ?
rouvax said:
What is different from other mesh cases ?
Click to expand...
Click to collapse
There are no mesh that allows small dusts to get between case and phone I suppose? I believe it also comes in transparent as well...
Have the same case - price and quality are perfect. I like that comparing to original phone materials this case feels like good-old soft-touch back panel. Only drawback I can find is that this case can be scratched easily - after a month of carrying my phone mainly in the pocket there appeared lots of small scratches. I bet this is due to the material of the case.
is there any problem with voice conversation like other ebay cases ?
No gps problem ?
raver2046 said:
is there any problem with voice conversation like other ebay cases ?
No gps problem ?
Click to expand...
Click to collapse
I havent had any issues with calls or GPS...
Not a fan of cases that expose the top or bottom of the phone so I am still looking while my S2 is in transit.
Thanks.
So a quick synopsis as I have now used it for a day.
The fit is very good, it actually feels like its protected but still has a very light(even lighter than my Ringke Slim) feel to it. The silicone bumper goes on first and elevates the volume and power buttons, then the actually bumper slides over.
The bumper is NOT aluminum.
I was under the impression it was, and at first glance was disappointed. However the plastic maintains a nice rigid feel in my hand where you feel as if the grip is there. The front and back are also fully protected for placement on either side.
Experiment #1 was combining this with my 5000mah battery and backplate however it was extremely tight and did not have a good feel.
Overall it slides in and out of my pocket, not as slippery as the Ringke but it feels "safer" coming out of the pocket and even while in use. Heres a few pics for everyone to see.
GatesHD said:
The bumper is NOT aluminum.
Click to expand...
Click to collapse
Un-sold. Thanks for the clarification on the shady sellers mis-advertising their wares. Shame.
Just got my case as well. Even though it isn't aluminum it seems like it can absorb a shock quite well. The ad on ebay where I bought mine did state the materials are made of "PC and silicon". The bumper itself is polycarbonate the the inner part is silicon. I'm pretty satisfied I remember in the Galaxy S2 Forums people complained about GPS lock problems with an aluminum case, so that may be something to think about if looking at an aluminum bumper.
hmmm I panicked for a moment there, I've ordered this a few days ago, and I cant believe that I didn't notice its not aluminium...
But having read your posts and a few from the aluminium thread I'm thinking this one might be better.
Can we get more pictures of other colours and stuff?
I had an aluminum bumper on my iphone4. It definitely reduced the signal strength and was not as comfortable as this one is in the hands. I am still debating on which to use as daily driver this or my ringke slim. This one is again very comfortable and protects the nice gunmetal trim of the note. The ringke is slimmer and slicker so it pulls out of pocket easier but does not provide full protection.
Looks horrible sorry.
GatesHD said:
I had an aluminum bumper on my iphone4. It definitely reduced the signal strength and was not as comfortable as this one is in the hands. I am still debating on which to use as daily driver this or my ringke slim. This one is again very comfortable and protects the nice gunmetal trim of the note. The ringke is slimmer and slicker so it pulls out of pocket easier but does not provide full protection.
Click to expand...
Click to collapse
The aluminum bumper reduced the signal on the i4 because the band is the antenna ... it wont affect the note AT ALL... just fyi.
Sent from my GT-N7000 using xda premium
This case is.....
So good...
I like it hehe. It's nice. But I find it funny how 1/4 of a case (a bumper) can cost MORE than other cases! Bah.
Anyone with white Note bought this? If so, a photo shot would be appreciated.
I ordered one today, after seeing this thread. It's pretty much what I was looking for
I see that theres a cutout at the top corner. what's that cutout for? thanks
Don't know for sure, but a number of cases have that cut-out. Antenna placement, maybe?
kanate said:
I see that theres a cutout at the top corner. what's that cutout for? thanks
Click to expand...
Click to collapse
That is the antenna for watching DMB(Digital Multimedia Broadcasting) in Korea.
That feature is only for domestic one.
This is my new cover. Aluminum, brushed and shiny.
Even better buttons now. Because buttons are a bit recessed, I don't accidentally push the buttons anymore, yet they are still easily accessible. Also no decrease in antenna performance.
i32.photobucket.com/albums/d39/damulder/P1050024.jpg
i32.photobucket.com/albums/d39/damulder/P1050026.jpg
i32.photobucket.com/albums/d39/damulder/P1050029.jpg
damulder said:
This is my new cover. Aluminum, brushed and shiny.
Even better buttons now. Because buttons are a bit recessed, I don't accidentally push the buttons anymore, yet they are still easily accessible. Also no decrease in antenna performance.
i32.photobucket.com/albums/d39/damulder/P1050024.jpg
i32.photobucket.com/albums/d39/damulder/P1050026.jpg
i32.photobucket.com/albums/d39/damulder/P1050029.jpg
Click to expand...
Click to collapse
Thats not the anymode though is it?
senectus said:
Thats not the anymode though is it?
Click to expand...
Click to collapse
Oops, you're right, it isn't. I probably should have started a new thread. Just wanted to share.
well well... after two weeks, my order just got refunded, with a message that the case was discovered to be an improper fit for the Note. sounds like they're going back to the drawing board
Ya i Have that bumper case to, its ok but i dont like how the rubber covers so much of the front of the phone. I think i just dont like adding any width to an already large phone.
I don't like TPU cases that have a matte finish because they seem to be more slippery on most surfaces I lay the phone down on, as well as for my dry fingers.
Ran across on WOWparts, and find this: http://www.wowparts.com/soft-tpu-back-case-cover-for-google-nexus-7-2-android-4-3/
Just wondering if anyone out there might have any 'hands-on' feedback. I may just have to go for this one unless I hear otherwise...
aaa111sss said:
I don't like TPU cases that have a matte finish because they seem to be more slippery on most surfaces I lay the phone down on, as well as for my dry fingers.
Ran across on WOWparts, and find this: http://www.wowparts.com/soft-tpu-back-case-cover-for-google-nexus-7-2-android-4-3/
Just wondering if anyone out there might have any 'hands-on' feedback. I may just have to go for this one unless I hear otherwise...
Click to expand...
Click to collapse
This is basically Fosmon's other variant TPU case without Fosmon's brand name on it. You will probably get a slightly better product when you choose Fosmon's though. I remember owning similar cases for Nexus 7 2012. The generic one had some leftover materials/plastic around the edges while the "branded" one was clean all the way.
http://forum.xda-developers.com/showthread.php?t=2438800
Here it is:
http://fosmon.com/fosmondurasseriestpucases-shapedesignforgooglenexus72ndgen2013black.aspx
The thing is that TPU isn't 'soft rubber'. TPU stands for Thermoplastic Polyurethane. It's a type of flexible plastic and hasn't the same high friction characteristics as silicone rubber. But there is often confusion by sellers.
There are Silicone Rubber based cases, though not many, and they are usually more expensive than TPU ones. I have a Sikai one for another tablet, but they don't seem to do one for the Nexus.
Ikazuchi said:
This is basically Fosmon's other variant TPU case without Fosmon's brand name on it. You will probably get a slightly better product when you choose Fosmon's though. I remember owning similar cases for Nexus 7 2012. The generic one had some leftover materials/plastic around the edges while the "branded" one was clean all the way.
http://forum.xda-developers.com/showthread.php?t=2438800
Here it is:
http://fosmon.com/fosmondurasseriestpucases-shapedesignforgooglenexus72ndgen2013black.aspx
Click to expand...
Click to collapse
Ohh! Thanks.
alpine101 said:
The thing is that TPU isn't 'soft rubber'. TPU stands for Thermoplastic Polyurethane. It's a type of flexible plastic and hasn't the same high friction characteristics as silicone rubber. But there is often confusion by sellers.
There are Silicone Rubber based cases, though not many, and they are usually more expensive than TPU ones. I have a Sikai one for another tablet, but they don't seem to do one for the Nexus.
Click to expand...
Click to collapse
Thank you so much for your information. This was a good lesson for me.
Its a great case as long as you are not expecting protection for the display. You can find them cheap. It protects the back (though the nexus back is pretty durable) and provides better "grip" in your hand to prevent you from dropping it. Although is not "soft" it is flexible and provides friction on a table top.
c7j8d9 said:
Its a great case as long as you are not expecting protection for the display. You can find them cheap. It protects the back (though the nexus back is pretty durable) and provides better "grip" in your hand to prevent you from dropping it. Although is not "soft" it is flexible and provides friction on a table top.
Click to expand...
Click to collapse
want to get one.
no
c7j8d9 said:
Its a great case as long as you are not expecting protection for the display. You can find them cheap. It protects the back (though the nexus back is pretty durable) and provides better "grip" in your hand to prevent you from dropping it. Although is not "soft" it is flexible and provides friction on a table top.
Click to expand...
Click to collapse
ok thanks.
dxboyz6146 said:
no
Click to expand...
Click to collapse
Anyway, thanks for your response.
jeffpan said:
want to get one.
Click to expand...
Click to collapse
Did you get it?
aaa111sss said:
Did you get it?
Click to expand...
Click to collapse
Not yet.
aaa111sss said:
I don't like TPU cases that have a matte finish because they seem to be more slippery on most surfaces I lay the phone down on, as well as for my dry fingers. I may just have to go for this one unless I hear otherwise...
Click to expand...
Click to collapse
I have the same exact case. Definitely recommend it
:highfive:
PieceofSlice said:
I have the same exact case. Definitely recommend it
Click to expand...
Click to collapse
Got my Poetic Affinity Case in today and figured I'd write a quick review. These poetic cases are very similar to UAG in looks and design but for 1/3 of the price. They are single peice hard poly carbonate and very ridged. Overall a nice design with a clear back to show off the beauty of your aluminum backed phone, offer a nice lip around screen for medium drop protection. My only issue is that the buttons are a little stiff but I suspect they will break in over time. I'm satisfied with my purchase and feel like it was a really good deal at around $10. It plays well with my spigen crystal screen protector and offers a good grip and feel in hand. If you guys have any questions feel free to ask. Sorry for the quality of the pics all I has was an s3 to take them.
how is the grip on it?
I had the Spigen Bumper Premium and it was still too slick for me..
Right now i have this case.. Zizo armor.. Super grippy.. but had to modify the power opening.. plus it squares off the phone and doesn't really show the HTC Beauty..
i got a Poetic Affinity case, it's a PIA to take it off if you want to, after the second time i took it off never put it on again, using Orzly FlexiCase now
codeglitch said:
i got a Poetic Affinity case, it's a PIA to take it off if you want to,
Click to expand...
Click to collapse
so other than it was hard to get off.. did you like the case? grip? feel? look?
Jaws4God said:
so other than it was hard to get off.. did you like the case? grip? feel? look?
Click to expand...
Click to collapse
in all honesty the case looks and feels good, great grip, my 2 issues with it was the taking it off because its harder "plastic", and the other issue was that the case doesn't exactly fit on top of the back of the phone, so it gets a lot of dust under there and you're gonna want to clean it.
If you can manage to take it off better than i could i would recommend the case, makes the phone a lite more bulkier but shouldn't be a problem, it wasn't for me.
I just got the Spigen rugged armor today, it's really great too, using it now!
IMO:
Poetic: good protection and good looks, still showing off your metal
Spigen Armor: good protection and good looks, no metal show off
Orzly crystal: not as good protection (thinner) but still good, and very transparent
Sorry for mentioning other cases on this thread but those are the 3 i got and i can give my opinion on
codeglitch said:
in all honesty the case looks and feels good, great grip, my 2 issues with it was the taking it off because its harder "plastic", and the other issue was that the case doesn't exactly fit on top of the back of the phone, so it gets a lot of dust under there and you're gonna want to clean it.
If you can manage to take it off better than i could i would recommend the case, makes the phone a lite more bulkier but shouldn't be a problem, it wasn't for me.
I just got the Spigen rugged armor today, it's really great too, using it now!
IMO:
Poetic: good protection and good looks, still showing off your metal
Spigen Armor: good protection and good looks, no metal show off [emoji14]
Orzly crystal: not as good protection (thinner) but still good, and very transparent
Sorry for mentioning other cases on this thread but those are the 3 i got and i can give my opinion on
Click to expand...
Click to collapse
no problem. i already ordered the poetic. looks like it should arrive monday.. just hoping its a great case for me.. im very picky lol
Sent from my HTC6545LVW using Tapatalk
well my case came today...
First Impressions:
Good:
1. Case feels premium.
2. Phone has great grip and texture.
3. Cutout for charger seems to be large enough for all my chargers, but will test more later.
4. Clear plastic is thick and doesn't have any tinting.
5. Cutouts for camera and speakers and mics seem perfect.
6. Buttons work great and have grip on them.
Bad:
1. Headphone cutout is small, should work for standard headphone plugs, but for a computer speaker plug in, it will not fit.. i may need to modify.
It will be interesting to see how the case does after a few days of testing... hopefully it will hold up as I really like the style and feel.
Thank you.
Shadows?
Came across this case the other day in my internet travels looking for something similar to my Supcase Unicorn Beetle Hybrid for my M8. The only case SC has for the 10 looks like a gawd damn brick. Ok for some, just not me. So, my question is, can anyone please confirm whether photos taken in this case cause any kind of blur, or shadow, from the cut out. I'm not talking about the known issues with lens flare here too, just to clarify. I've never owned a clear case but have heard of some that do cause a shadow (I am assuming a reflection from flash off the clear cut out).
Cheers.
Sc0ttyP said:
Came across this case the other day in my internet travels looking for something similar to my Supcase Unicorn Beetle Hybrid for my M8. The only case SC has for the 10 looks like a gawd damn brick. Ok for some, just not me. So, my question is, can anyone please confirm whether photos taken in this case cause any kind of blur, or shadow, from the cut out. I'm not talking about the known issues with lens flare here too, just to clarify. I've never owned a clear case but have heard of some that do cause a shadow (I am assuming a reflection from flash off the clear cut out).
Cheers.
Click to expand...
Click to collapse
since they are completely cut out, should not have any interference.
Sent from my HTC6545LVW using Tapatalk
Jaws4God said:
since they are completely cut out, should not have any interference.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
Ok. So, photos all good then?
Sc0ttyP said:
Ok. So, photos all good then?
Click to expand...
Click to collapse
yep, should be no issues..
see attached picture. cutout is d
clearly around camera, flash and Laser focus..
Sent from my HTC6545LVW using Tapatalk
Rightyo, and still thumbs up on the case?
Sc0ttyP said:
Rightyo, and still thumbs up on the case?
Click to expand...
Click to collapse
only complaint after 1 day use was the headphone plug too small for the larger plugs.. like for computer speakers.. so i used a round file and widened it..
so now its perfect.. great grip. love how it shows off the phone.. slim and shaped like phone.
Sent from my HTC6545LVW using Tapatalk
Jaws4God said:
only complaint after 1 day use was the headphone plug too small for the larger plugs ... slim and shaped like phone.
Click to expand...
Click to collapse
That's exactly what i'm looking for. Thanks for the replies J4G, and the review.
Hey man, I was just about to purchase from Amazon, thought i'd read through some of the reviews and some people are advising where the camera cut out is, the case sits up off the phone a little (i.e. not flush with phone), allowing debris in through the cut out. Looks flush from your last pic. Is this true?? I really don't mean to sound pedantic want to make sure I'm happy with case before I pull the trigger cause there's none to be found in Oz and I don't want to have screw around with returns.
Sc0ttyP said:
Hey man, I was just about to purchase from Amazon, thought i'd read through some of the reviews and some people are advising where the camera cut out is, the case sits up off the phone a little (i.e. not flush with phone), allowing debris in through the cut out. Looks flush from your last pic. Is this true?? I really don't mean to sound pedantic want to make sure I'm happy with case before I pull the trigger cause there's none to be found in Oz and I don't want to have screw around with returns.
Click to expand...
Click to collapse
from what i can see, that does appear true... I haven't seen much dust and debris get in there.. however i have only had it on a few days. :silly:
I will say that a lot of people said they are a pain to get off.. however I can attest that mine is like any other case.. it does hold on well, but just peel back a corner and then work on another corner, it pops right out.. so should be easy to clean..
Just received some of the Clear X-Level TPU case I found and ordered, it is .78mm with clear matte edges all around that feel great in hand.
https://photos.app.goo.gl/YNDccnTmGaIv250z1
The case is similar to the 'MNML' case in that it does not provide a lip for the screen, but it does hug the screens curves to provide a bit more protection in case of accidental drops since it is made of TPU. Dont get me wrong, it is not not a drop proof case at all, but even thin TPU material can absorb more of an impact than hard plastic, and with a good screen protector you're set. The camera is also ever so recessed enough that it wont hit flat surfaces when placed on them. The buttons are also feel great and tactile.
The only thing that may bother some, but doesn't bother me since it isnt that noticeable from afar, is that even though it has the "dot buffer" most clear tpu cases have, it still shows some "water markings" where the case meets the back glass. This is likely because of how thin the case is, and how the back glass curves and melts into the 2 XL's corners. The case will also likely yellow and scratch over time, but that is why I got a small supply lol. I'll be able to swap them out as needed since it will be my daily for a while.
(On a side note) If anyone is interested I would also be wiling to sell some of the extra I have. I know it sounds like an ad for me to sell... but I just feel I got more than I needed.. and it seems these are hard to get in the US for some reason. So if you are just let me know, id do $12 shipped, first class, US. If you want more than one Id do a deal cause of shipping as well! If I have more than one left i want to sell that is lol
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
scottjal said:
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
Click to expand...
Click to collapse
It actually does. The L&K is about as thick as the Ringke Bevel. I had the "Pleson" version of it (theyre both the same just rebranded) and that is how thick it felt. The X-Level is .78mm thin.
Have a link for where you got it?
Sent from my iPhone using Tapatalk
zaydaboss said:
Have a link for where you got it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Nocturnal86 said:
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Click to expand...
Click to collapse
Check your PayPal
zaydaboss said:
Check your PayPal
Click to expand...
Click to collapse
Check your PM's, need your address
Nocturnal86 said:
Check your PM's, need your address
Click to expand...
Click to collapse
Loving this case. Was concerned it would crack like the mnml ones it's tpu so that won't be a issue this will keep me from going commando I hate cases
You have a spare case to sell me?
rfuser said:
You have a spare case to sell me?
Click to expand...
Click to collapse
Just saw this, sent you a PM
What about sending one up north to Canada, eh?
evanwier said:
What about sending one up north to Canada, eh?
Click to expand...
Click to collapse
If you pay for shipping along with the case lol
eBay got the hook-up: https://www.ebay.com/itm/X-Level-Pu...-Slim-Armor-Clear-Soft-TPU-Cover/222698641914
It took 23 days to reach me in Los Angeles from China.
Just got mine yesterday and I love it. I've been on the hunt for a good clear case to show off the phone. I first had the Spigen Liquid Crystal but it added a bit too much bulk for my liking. This one is just thick enough to protect the rear camera lens when the device is resting face-up. My only complaints are that:
1. there is no lip to protect the screen if I want to set the phone face-down (seems to be common amongst slim cases), and
2. the cut-outs are a bit sharp from being unfinished (though really this is not a big deal for me).
The fingerprint reader cut-out is a bit off-center but at a glance it isn't noticeable for me.
Unfortunately after some time (2 weeks) case has weird bluish discoloration.
I'm assuming this came from holding my phone in pocket (jeans).
I have also Ringke clear case and same story, same discoloration.
been using this for more than half year, same as other tpu case, it will turn yellow as time goes by.