Screen Issues - Kindle Fire Q&A, Help & Troubleshooting

My Kindle Fire has been having a problem lately. When I touch one spot on the screen another receives the touch. For example when using the keyboard if I press the backspace button it thinks I pressed "t". I was running cm10 but I returned to stock and it didn't fix the issue. I'm thinking it's a problem with the digitizer. I really don't want to spend the money to buy a new screen/digitizer. Any advice?

Eaffon said:
My Kindle Fire has been having a problem lately. When I touch one spot on the screen another receives the touch. For example when using the keyboard if I press the backspace button it thinks I pressed "t". I was running cm10 but I returned to stock and it didn't fix the issue. I'm thinking it's a problem with the digitizer. I really don't want to spend the money to buy a new screen/digitizer. Any advice?
Click to expand...
Click to collapse
I would usually put it down to the screen calibration, but when you say you changed ROMs too, I can't be too sure. Anyway, is this only on the keyboard, or do you experience it elsewhere too?
Try calibrating your device, and if that doesn't work, just take it to the service center and tell them the screen's not working properly. If it's under warranty still, they might not charge you anything. Unless, of course, there is water damage and your insurance does not cover it.

I am now on the stock ROM, how would I go about calibrating the screen? Also it is no longer under warranty.
Sent from my Nexus 4 using xda app-developers app

Any suggestions?

Related

[Q] HW0002 Touchscreen Problems.

Recently my EVO has stopped responding to touch inputs. It will wake with the power button but sometimes the touchscreen will not respond. Sometime I'll be able to launch an application and then it will stop. Sometimes it will work fine for minutes/hours and then the problem will surface. I've tried multiple ROMs and it doesn't seem to matter what software (AOSP or Sense) the phone is running.
Any ideas?
Sounds like it may be a hardware problem and not a software one. Have you had any problems with the LCD or digitizer?
Tripp-phpBB said:
Sounds like it may be a hardware problem and not a software one. Have you had any problems with the LCD or digitizer?
Click to expand...
Click to collapse
well if its not responding then it is the digitizer. but before you dump a bunch of money into a new digitizer or new phone let me ask u this.
does it only not work while plugged in and charging? because that is kinda a common problem. as long as it works when not plugged in then ur fine.
I haven't specifically tested it to see whether or not being plugged in affects the problem but another symptom is that when it goes on the fritz you can be hitting the back or home area at the bottom and it will register the touch somewhere near the top of the screen.
Does that narrow the possibilities?
Definitely sounds like a screen/digitizer issue.
If you have the protection plan from Sprint, you can take to a repair center and they will replace for you. No charge.
Thanks for the help. My local Sprint store will replace it for $35. So we'll see if that's the issue.
Gotta flash over to stock ROM so they'll work on it though.
EDIT:
Spoke to soon. Technician at the Sprint store won't work on it. They're trying to claim there is water damage when there is none. I guess I'll have to do it myself.

Xperia plays touchscreen

hey there guys and girls,
This is my first post and was just wondering about my xperia plays touchscreen. I bought it almost a year ago and since i got it the problem has been occuring. Its not major dont get me wrong but it can be really annoying when i am texting my frineds. What happens is that i will press a letter then it will just decide to press a bunch if other letters next to them. Also the keyboard will randomly go down so ill end up clicking send and completely wasting a text.
Any help would be great... Thanks xD
Large fingers? lets hope its not a digitizer problem but you did state its been happening since you got the phone. the xperia play does seem to me to be more sensitive to the amount of pressure needed or not needed; or is it just me?
Got used to using swype keyboard on my sgs and haven't used the stock keyboard on the play.
you could try to clear data for the keyboard Settings>Applications>Manage Applications>All>"keyboard"
maybe another keyboard will solve your problem entirely, there are plenty of them on the market/store.
this is just one as there are many
https://play.google.com/store/apps/...xLDEsImNvbS52bGx3cC5pbnB1dG1ldGhvZC5sYXRpbiJd
edit: forgot to mention, if you install this or any other input method you will first need to enable it in Settings>Language & keyboard>"keyboard"
just tick the box next to the keyboard and it will give you a prompt; read>OK
then say in messaging just press and hold on the text input field and select input method>select keyboard you want to use
also, when your keyboard disappears for whatever reason or doesn't show when needed you can press and hold the menu button for a few seconds to bring your keyboard up or make it go away.
I pulled off the screen protector and that seemed to fix it for me.
i've been having the exact same problem, it seems to occur mostly when my phone is charging or when it's too warm. Didn't bother sending it back though, but yes, it can be verry annoying when trying to text
Don't worry, its a standard Sony Ericsson issue. Usually occurs when the device overheats.
Reboot or look into ROM flashing and the problem will be resolved
Sent from my Xperia Play using xda premium
Mine does that when there's moisture on the screen, or when plugged into the charger. I've found typing to be much less annoying in wet conditions when using Swype.
Dry off your screen often enough and it should help. Removing the anti-shatter film (which is next to useless anyway) also makes a difference.
Sent from a parallel universe
Welcome to XDA!
Try solutions posted above.
If You ever need to test any piece of hardware on your phone, try accesing serice menu by typing this code in Dialler:
*#*#7378423#*#*
From there You can access Service tests menu and test Your Touch Screen/Earphone/Display just to mention a few.
Also screen protector isn't any good for me, standard keyboard is too small and stock firmware is to laggy to type messages. Solution is easy if You are ready to give your phone a boost by flashing it as mentioned by someone else above.
Wow, there is a great amount of different anwsers
I remember that someone on these forums said that Xplay has problems with multitouch regonizing (or something)
Basicly, the touch points wont reset unless you do something (i dont remember what)
Personaly, i just press powerbutto to "shut down" my screen, press main menu butto and open the lock, its all back to normal
EDIT: wait few seconds (like 5 or so) before you reopen the screen
i'm having a similiar problem, i charged my phone with 5v a couple times, so the last week, the touchscreen doesn't work. sometimes it does, it has been abit tricky. it like works sometimes, with an effort of constantly mashing the screen (with swipes and presses), but the last 24 hours, it's been practically dead. every other part of the phone works, like LED, pad controls, speaker, etc etc, just touchscreen is dead... any solution, methods?
Maison Looi said:
i'm having a similiar problem, i charged my phone with 5v a couple times, so the last week, the touchscreen doesn't work. sometimes it does, it has been abit tricky. it like works sometimes, with an effort of constantly mashing the screen (with swipes and presses), but the last 24 hours, it's been practically dead. every other part of the phone works, like LED, pad controls, speaker, etc etc, just touchscreen is dead... any solution, methods?
Click to expand...
Click to collapse
Broken digitizer maybe?
Sent from a parallel universe
captain67 said:
Broken digitizer maybe?
Sent from a parallel universe
Click to expand...
Click to collapse
how would one go about fixing this?
captain67 said:
Broken digitizer maybe?
Sent from a parallel universe
Click to expand...
Click to collapse
if so, replacement is easy right?
same time is, sometimes it's been working and sometimes not...
bigcez74 said:
how would one go about fixing this?
Click to expand...
Click to collapse
Honestly, I have no idea. I just know that the digitizer is what makes the touch screen work, and that there have been xda users buying them for replacement parts before.
Sent from Asgard
I have been getting this problem when coming in from outside. I can hold my finger about 1cm above the touchscreen and it will type random letters as well. Seems to be affected worse in bottom left hand corner for me. It settles back down after a while of being indoors. Its really weird though.
Sent from my R800i using Tapatalk
simacca said:
I have been getting this problem when coming in from outside. I can hold my finger about 1cm above the touchscreen and it will type random letters as well. Seems to be affected worse in bottom left hand corner for me. It settles back down after a while of being indoors. Its really weird though.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
That's because the difference in temperature and humidity causes condensation to gather on the screen, temporarily. Capacitive touch screens work by conducting electricity, and moisture is conductive.
Sent from Asgard
captain67 said:
That's because the difference in temperature and humidity causes condensation to gather on the screen, temporarily. Capacitive touch screens work by conducting electricity, and moisture is conductive.
Sent from Asgard
Click to expand...
Click to collapse
Ahh, I see. That makes sense. I took the factory installed screen protector today as well. I'm hoping this will help too.
Sent from my R800i using Tapatalk

[Q] Dropped my White SPH-L710; no display or touch, help!!

Hello Everyone,
I dropped my White SPH-L710 yesterday which I was using on page plus. It has no scratches, cracks or dents on the glass, however, there is no display and no touch functionality.
When I receive the call, I can hear it ring and everything but cannot answer because the touch isn't working. The screen is dark so there is no display either. Physically it looks fine but I suspect the LCD is a goner. Any help on what I can do to fix this thing. No insurance or warranty here. I'd rather not spend a lot of money on this.
Thanks in advance for the inputs.
I believe this happened to me one time when I had my epic. I freaked for an hour... Then decided to try and Odin a stock tar... Fixed it. If your phone is ringing and working it means your display is jacked. I'm sure there is little you can do. Hopefully you have insurance.
Try to Odin... But attempt to get your phone into download mode using your memory. Volume down + home button + power button.... Wait 5 seconds, press volume up. You should then be good to go. Only advice I have.
Sent from my SPH-L710 using xda premium
You can replace the screen and digitizer I'm not sure how much $$$ it is though. Their are instructions on thia forum.
Sent from a planet far far away.
Thanks for the inputs.
@RealTic
I tried that. The display is dead, I can't see anything when booting up, or in the recovery, or in the download mode.
@Speedin07si
I was thinking of ordering this and trying to work on it myself. Can you point me to the thread, and let me know if this is the right thing to order given the description of my problem. Thanks, much appreciated.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=281075881997
Search how to take it apart, and check for loose ribbons. If everything looks good then purchase a new one.
Sent from my SPH-L710
@csmasn
Thanks. I opened it up and checked everything and it did not help. So I guess the only way to fix it is to buy the LCD and digitizer.
This might help. https://www.youtube.com/watch?v=zzFU_8kYDdw&list=PLCvcbJqO8a2335FcP8CKfA_IvIWlHv4VH&index=1

Galaxy Note 8.0 need advice!

GT-N5110 wifi version. Ive had this device for 10 days. Out the box it was running 4.1.2 and seemed work great other than the occasional 3-5 seconds when screen would become unresponsive during normal use. After using it for a few days I decided to go ahead and update to 4.2.2 thinking maybe it would fix the screen issue. It did fix that issue but now im having another problem. After the device sits dormant for awhile the screen doesnt respond to touch but still works fine with the s pen. Ill turn it on after sitting all night and after swiping to unlock the screen it becomes unresponsive. I usually have to lock/unlock the screen several times before it will start responding. After it starts working I can be on it for hours with no more problems. But if I lock the screen an set it down for awhile when I go to use it again it does the samething. It seems like it has to warm up. I tried doing factory data reset but that didnt help. It is rooted also but the only thing ive done so far is get rid of some bloatware.(i didnt root it untill after the problem started). Anyone have any advice?
Do you have your note in a cover , and if so does it have a magnet.
Sent from my GT-N5110 using xda app-developers app
That does sound rather crazy, the unresponsiveness is out of the ordinary... did you try turning off a lot of the extra features built in by Samsung? another thing you could do is download Clean Master from the play store and take a look at your Ram use-age and clean out some cache files with it, this might help with the lag. The touch response could be hindered due to a case or screen protector... other than that the only thing i could think is if there was physical damage done to it before that could cause the touch screen to act that way.
Ummmm... I would have taken it back to the store and asked for a replacement.
That is not normal at all. even with the device's settings left alone, there should not be any issues with responses with touch.
Note... The pen feature is totally separate from touch. The screen has two different features, one being a digitizer for the pen function the other for touch. It is possible that during assembly that the connection for the touch screen is faulty, as a bad solder joint during wave process could make the connection heat related. As the device cools, the contacts contract causing a fault with touch operation. When heated up from normal use, expansion forces contact between connector and board for normal operation to function with touchscreen.
livis n fur said:
Do you have your note in a cover , and if so does it have a magnet.
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Using another case without magnets fixed the problem for me
Sent from my HTCONE using Tapatalk
FrozenRiff said:
Using another case without magnets fixed the problem for me
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
The problem was my samsung book cover! Can't believe samsung would make a cover that causes these kinds of issues. Glad I only paid 7 bucks on ebay instead of 50 at best buy. Thanks guys for the comments!
TwanMan87 said:
The problem was my samsung book cover! Can't believe samsung would make a cover that causes these kinds of issues. Glad I only paid 7 bucks on ebay instead of 50 at best buy. Thanks guys for the comments!
Click to expand...
Click to collapse
Thanks for the FYI. I was using the moko whatever with a keyboard and I got the freezes all the time. I was thinking about the official Samsung one but if that gives you problems then forget it. I almost sold this thing on eBay cause I couldn't take the freezes anymore. Now I use a tpu case with it and couldn't be happier
Sent from my GT-N5110 using Tapatalk

Weird touch screen.

Its been some days, I'm experiencing this weird touch screen problem.
My DZ touch screen doesn't respond properly.
For example:
If i see an image and slide just one finger up and down then it would zoom in and out. And then the whole screen becomes unresponsive.
It seems as if, its touched by itself. Even the softkeys would go numb. Only the haptic feedback of my search button works at that moment.
But the trackpad works perfectly.
But, If i lock and unlock the screen using power buttons, it would work properly for some few moment and then again the problem repeats.
At present I'm repeating this process of locking and unlocking screen to use my phone.
One even worst weird thing is that, if the device is connected to a charger and kept on the table or floor. This problem doesn't occur.
I have done system format, restored my nandroids and even changed Roms. The problem still exists.
Please note, i don't use any Casing or covers that would press the device hard for malfunctioning of screen. I have even removed and replaced my screen guard.
I'm sure, its not a software issue.
And even i dont think its a strip issue, because i dont use my physical keyboard always.
Can anyone say what hardware issue it might be..?
Or what i need to do? I'm really out of options.
Do i have to replace my whole screen or the digitizer..?
Thanks...
Thats no fun,
As you stated it's more than likely a hardware fault, the two most likely culprits would be the digitizer or the main flex cable
Which would be this and this
both relatively easy to replace depending on your experience
in 4.x and up ROMs check the developers setting to show touch or use apps like
z device test
or
yet another multitouch test
these wont help you fix the issue but may show you where the bad points are on the screen
best of luck
I know the problematic spot. Its near Search softkey. Even Yet another multi-touch test would stuck at that spot....
As you can see in the image, that i'm not holding anywhere, still it shows that somewhere around Search softkey its touched by itself.
In second image, If i move my fingers around, it would show the other touch responds, but if i slide near search, it would go and stuck there itself.
So, i guess i would first go with the flex cable.
In actuality I'm leaning toward the digitizer in your case, but its possible to be either.
And if you have a spare phone it may be worth disassembling even without buying anything. On a G1 I once fixed a similar issue just taking out the digitizer and cleaning the contacts on the ribbon and the edges of it as well, when I put it back it worked like new. I think some dust may have gotten into the edges but it may be worth a shot before buying anything... But could make matters worse so if you don't have a spare, buy parts first
Best of luck
Sent from my Nexus 7 using XDA Premium 4 mobile app
I guess i should try disassembling and clean it first. If it still persists then i would go for digitizer.
And thanks for giving a hope.
Thanks...

Categories

Resources