Develop Bugs

Mobile Odin help -- please :(

Seem to have gotten myself in another bind :/
Ok, so I flashed a ICS ROM and as usual I want to flash something else(I admit its a bad addiction! ). Unfortunately, my OEM cable isnt working and so odin can't recognize the phone!
SO I have mobile odin installed but I need the correct files. Never had to use it until now, I thought I had a correct kernel/recovery to flash but it says "partition not recognized"
So please mind that I will have to download the files DIRECTLY from my phone. I will seriously LOVE anyone who can help me out

Go to the wiki, found in the sticky section, you're looking for el26 kernel with cwm tar file. In mobile Odin, click kernel and find the file. Check md5 and go. During reboot, Press and hold volume up and power till you get to cwm. Do your wipes and flashing there. Good luck!
Sent from my SPH-D710 using Tapatalk 2

thegoodrat said:
Seem to have gotten myself in another bind :/
Ok, so I flashed a ICS ROM and as usual I want to flash something else(I admit its a bad addiction! ). Unfortunately, my OEM cable isnt working and so odin can't recognize the phone!
SO I have mobile odin installed but I need the correct files. Never had to use it until now, I thought I had a correct kernel/recovery to flash but it says "partition not recognized"
So please mind that I will have to download the files DIRECTLY from my phone. I will seriously LOVE anyone who can help me out
Click to expand...
Click to collapse
Assuming you are using something from the OneClick thread, you need to unpack the file first, either double-click the .exe in windows to unpack or use zarchiver on android. The resulting file can be use with Mobile ODIN using Open File.

Here's the el26 cwm kernel
http://db.tt/jUNENJGl
Sent from my SPH-D710 using Tapatalk

thegoodrat said:
So please mind that I will have to download the files DIRECTLY from my phone. I will seriously LOVE anyone who can help me out
Click to expand...
Click to collapse
There are several apps like Wifi File Browser that you can install on your phone that will allow you to transfer files back and forth from your pc/phone if necessary. Really nice to use too.

GNex Bricked - Tried Fastboot/ODIN/OMAP

I am pretty new to flashing and rooting android phones. I have a GNex 4.1.1 JB Stock ROM. It was stuck in a boot loop somehow and I wasn't able to fix it by factory reset. Someone told me to unlock and root the phone to install a new stock ROM.
I unlocked using the Wuz toolkit. But rooting wasnt possible because I couldnt push files through ADB. Then I tried doing an ODIN flash using this method (http://forum.xda-developers.com/showthread.php?t=1827685). But I got stuck at NAND Write Start.
Now I have a Phone <-> Yellow Triangle with Exclamation <-> Computer. Which I believe is download mode for Samsung.
Then I tried an OMAP Flash using this method (http://forum.gsmhosting.com/vbb/archive/t-1465412.html). I was successful installing the OMAP drivers and running the bat file. However I am still have the phone/yellow/triangle/Computer logo on my screen.
I tried to do an ODIN flash again but still stuck at NAND Write Start.
I already tried to do this:
1.) Repartiion using the PIT file [ODIN]
2.) Then OMAP flash
3.) Then Flash PDA file using ODIN.
I also tried it by swapping steps 1 & 2 but no progress.Can someone tell me the exact sequence of steps or any advice what to do now?

First of all, let me list your mistakes before I help you out:
Mistake #1: You used a toolkit. By doing so, you skipped over the entire learning part of unlocking and flashing your device, so you have no idea what went wrong or what you did.
Mistake #2: You used Odin when you didn't have to. You can mess up your device with Odin, while it is next to impossible to do so using fastboot. We have a Nexus device, i.e. a device with an unlockable bootloader and the ability to use fastboot. In my opinion, Odin should only be used as a last resort.
Mistake #3: You did not read enough before you decided to fix your bootloop. There are a bunch of stickies in the General and Q&A sections. Did you read any of them?
Now, on to fixing your issue.
Go to the Dev section and find the IMM76D Odin file in a thread started by Chainfire.
Follow the instructions in that thread to flash the complete package. Odin should be able to flash your device even though you are on the screen you currently see. Do not use a JB Odin package, use an ICS package.
Sent from my Galaxy Nexus using Tapatalk 2

I read a few articles and i know it wasnt enough. I posted a thread on android central and a senior wrote down some steps and i followed that. But going for odin and omap was totally my experiment.
I links to the imm76d image do not work any more. File not found error. There were no other sources i could find. Do you have another link to the file?
Sent from my cm_tenderloin using Tapatalk 2

shravanm18 said:
[snip]
I links to the imm76d image do not work any more. File not found error. There were no other sources i could find. Do you have another link to the file?
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
I can't remember if I have them on my PC (I'm not near it at the moment) -- if i do, i will upload them tomorrow. But in any case, you should be able to find links somewhere via a Google search, no?
Sent from my Galaxy Nexus using Tapatalk 2

Worse comes to worse I have the Odin files too if you guys need them. I've used so many times to save my ass
Sent from my Galaxy Nexus using XDA Premium HD app

efrant said:
I can't remember if I have them on my PC (I'm not near it at the moment) -- if i do, i will upload them tomorrow. But in any case, you should be able to find links somewhere via a Google search, no?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I have my stock rooted files in a twrp backup. I'm unclear how that works they Odin but I'll pm you the dropbox link.
EDIT guess it would be if great importance to know if you are Sprint or not..
And i meant to quote the guy needing them. Oops

JediNinjafication said:
I have my stock rooted files in a twrp backup. I'm unclear how that works they Odin but I'll pm you the dropbox link.
EDIT guess it would be if great importance to know if you are Sprint or not..
And i meant to quote the guy needing them. Oops
Click to expand...
Click to collapse
I just looked at the thread I was referring to earlier, and someone already had posted another link to the files. The OP did not read the entire thread.
Sent from my Galaxy Nexus using Tapatalk 2

efrant said:
I just looked at the thread I was referring to earlier, and someone already had posted another link to the files. The OP did not read the entire thread.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Isn't that what got him into this in first place?

JediNinjafication said:
Isn't that what got him into this in first place?
Click to expand...
Click to collapse
He cannot load a recovery if he has no fastboot access. His only option now is Odin.
Sent from my Galaxy Nexus using Tapatalk 2

efrant said:
He cannot load a recovery if he has no fastboot access. His only option now is Odin.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
at least Odin is easy enough

I downloaded the image and tried an odin flash but seems to be stuck at nand write start. I also see that this process does not have a pit to repartition. I had previously tried to re partition it using the pit file given in the jb stock rom odin image. Can i use the same one here?
Sent from my cm_tenderloin using Tapatalk 2

I downloaded the image and tried an odin flash but seems to be stuck at nand write start. I also see that this process does not have a pit to repartition. I had previously tried to re partition it using the pit file given in the jb stock rom odin image. Can i use the same one here?

shravanm18 said:
I downloaded the image and tried an odin flash but seems to be stuck at nand write start. I also see that this process does not have a pit to repartition. I had previously tried to re partition it using the pit file given in the jb stock rom odin image. Can i use the same one here?
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
You shouldn't need the .pit file. That's what probably messed things up in the first place.
If Odin is not working, I guess you can try Omap flash and then Odin. Note that if you try omap flash, and then Odin still doesn't work, I don't think you have any other option besides sending it in for repair.
Sent from my Galaxy Nexus using Tapatalk 2

I tried the OMAP Flash. It executes perfectly in the command window but my phone still shows the "connect phone to PC" picture with yellow excalmation. After that I tried ODIN flash the IMM76D tar file but I am still stuck at NAND Write flash. What I want to know is that what are the reason for getting stuck at NAND write flash and what should have happened to my phone after OMAP Flash was complete?
Furthermore I was also thinking if using a USB jig would help me get back into fastboot.

shravanm18 said:
I tried the OMAP Flash. It executes perfectly in the command window but my phone still shows the "connect phone to PC" picture with yellow excalmation. After that I tried ODIN flash the IMM76D tar file but I am still stuck at NAND Write flash. What I want to know is that what are the reason for getting stuck at NAND write flash and what should have happened to my phone after OMAP Flash was complete?
Furthermore I was also thinking if using a USB jig would help me get back into fastboot.
Click to expand...
Click to collapse
After OMAP Flash, you should still see the "connect phone to PC" picture with yellow exclamation, but now Odin should have worked. Not sure why it gets stuck on NAND write flash. Maybe try un-checking the F. Reset Time option. Someone about a week ago said that it worked for him.

[Q] wrong kernel blacked out

i searched for a few min and didnt find what i was looking for so plz help me.
i have a stock rom sprint galaxy s3 and i flashed the wrong kernel and now i have a black screen after galaxy boot screen. i deleted my backup from last night today also... plz help me get the stock kernel back
the kernel that i flashed was the one designed for jellybean. i didnt see anywhere that it wouldnt work with the stock rom.
thanks jeff

can you get into recovery or download mode if you can get into either your not screwed just yet. volume down+ power and menu button . volume up+power and menu button.
Sent from my SPH-L710 using XDA Premium App

bonebeatz1234 said:
can you get into recovery or download mode if you can get into either your not screwed just yet. volume down+ power and menu button . volume up+power and menu button.
Sent from my SPH-L710 using XDA Premium App
Click to expand...
Click to collapse
yeah i can get into recovery and all that. i was trying to push the stock kernel but im out of town on someone elses computer and cant find a odin to download. all of them are zip'ed and i downloaded some whack winzip and it wont work unless i have a registered copy and blah blah... is there any way i can just install the driver for my phone and mount it and push the stock kernel to it???

Fml123denney said:
yeah i can get into recovery and all that. i was trying to push the stock kernel but im out of town on someone elses computer and cant find a odin to download. all of them are zip'ed and i downloaded some whack winzip and it wont work unless i have a registered copy and blah blah... is there any way i can just install the driver for my phone and mount it and push the stock kernel to it???
Click to expand...
Click to collapse
unzipped odin (download all 4 files in folder) https://www.dropbox.com/sh/g4c2i0i0q2kw5c4/87BZrLlod4
stock kernal tar if needed https://dl.dropbox.com/s/m00jzrxv9tphr93/boot-stock-spr-l710palen.tar?dl=1
If you cant use odin you could use adb.
Download stock kernel boot.img https://dl.dropbox.com/s/90o7ch8dduooje4/boot.img?dl=1
Put on root of sd (adb push boot.img /data/media/)
then do adb shell
When you get the # type this line:
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p7
or since Im such a nice guy FLASHABLE ZIP for recovery https://dl.dropbox.com/s/z6q3z30ojpl9yz8/stockkernel.zip?dl=1

i have odin working now... idk what adb is??? i downloaded the stock kernel but i cant select it in odin because it is a zip file... idk what dropbox is either... i think i downloaded it when i rooted but that was over a month ago so im not sure... im gonna google adb real quick and see if i cant get that going
....do i just boot the downloader screen for adb like odin??

adb looks more difficult than my experience level. i dont know hardly anything about programming.. so if anyone knows how to push the zip file from odin plz let me know... im kind of stuck and i need my phone for work tomorrow....
thanks again
jeff

Fml123denney said:
i have odin working now... idk what adb is??? i downloaded the stock kernel but i cant select it in odin because it is a zip file... idk what dropbox is either... i think i downloaded it when i rooted but that was over a month ago so im not sure... im gonna google adb real quick and see if i cant get that going
....do i just boot the downloader screen for adb like odin??
Click to expand...
Click to collapse
The zip file is to flash in recovery. Adb is also done in recovery.
The .tar is for Odin. Its the link that says stock kernel tar if needed. Load that in the pda slot of odin. And you should know what adb is, if our gonna mod your phone adb is your best friend. Especially in a situation like this.
You should do some reading before you brick your phone.

i reflashed the tar file in odin... nothing still bricked... i downloaded adb and it started downloading all these images.. is that normal? like huge files i think???
ill try the adb thing, if you can walk me through it that would be great.... i will start it back up and let the files download i guess.. i have the stock kernel zip ready so i just dont know how to use adb....
the adb i saw on youtube looks like he is in mscommand or whatever that is called, but the adb i have is like a white box with a bunch of lines an stuff goin on

Fml123denney said:
i reflashed the tar file in odin... nothing still bricked... i downloaded adb and it started downloading all these images.. is that normal? like huge files i think???
ill try the adb thing, if you can walk me through it that would be great.... i will start it back up and let the files download i guess.. i have the stock kernel zip ready so i just dont know how to use adb....
the adb i saw on youtube looks like he is in mscommand or whatever that is called, but the adb i have is like a white box with a bunch of lines an stuff goin on
Click to expand...
Click to collapse
Pm'd

i didnt recieve a pm.....

Fml123denney said:
i reflashed the tar file in odin... nothing still bricked... i downloaded adb and it started downloading all these images.. is that normal? like huge files i think???
ill try the adb thing, if you can walk me through it that would be great.... i will start it back up and let the files download i guess.. i have the stock kernel zip ready so i just dont know how to use adb....
the adb i saw on youtube looks like he is in mscommand or whatever that is called, but the adb i have is like a white box with a bunch of lines an stuff goin on
Click to expand...
Click to collapse
Have you tried just flashing a ROM through recovery? I've flashed ics kernels to jb and vice versa (accidentally) and solved the problem by just flashing a ROM again. They contain the right kernel
Sent from my SPH-L710 using xda premium

nbeebe24 said:
Have you tried just flashing a ROM through recovery? I've flashed ics kernels to jb and vice versa (accidentally) and solved the problem by just flashing a ROM again. They contain the right kernel
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
+1 and its the easiest way.

[Q] Odin Froze...

Just want to get straight to the point;
Brother did a bad flash, Phone doesnt come on at all. But odin still recognizes the phone. Tried flashing stock from xda. gets stuck on setup.
Again, if pc doesnt recognize my brothers phone you would think its dead, but odin does recognize the phone. Also tried using usb jig, nothing, tried recovery, download modes nothing... Any help is much appreciated.

Try different USB ports..or maybe check the download of the file your trying to flash or redownload
Sent from my SAMSUNG-SGH-T989 using xda premium

yea tried all my usb ports, and three different downloads and stock rom off xda. I dunno im just kinda blank at what else i can do.....
thakrew317 said:
Try different USB ports..or maybe check the download of the file your trying to flash or redownload
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse

My first step would be to re-download a stock rom and try to flash it multiple times (which i'm sure you already have done). I know when I had a bad flash back to stock and got a completely black screen, it took me quite a few flash attempts to get it to flash correctly.

ok will do.
MoNsTeRmAyHeM said:
My first step would be to re-download a stock rom and try to flash it multiple times (which i'm sure you already have done). I know when I had a bad flash back to stock and got a completely black screen, it took me quite a few flash attempts to get it to flash correctly.
Click to expand...
Click to collapse

Might also try a different usb cable if you have one, I know one of my cables went bad and had issues connecting to my pc.

Yeah I had to use a Samsung OEM cable to get mine to reconize
Sent from my SAMSUNG-SGH-T989 using xda premium

Any progress on your re-flashing?
Thrown at your face by my T989

Yea I had to step aside and repair some iPhones. Just doesn't make sence... Yea I'm pretty close to calling for jtag.
It recognize then freezes on setup connection... On every com...
MoNsTeRmAyHeM said:
Any progress on your re-flashing?
Thrown at your face by my T989
Click to expand...
Click to collapse

I had a similar issue and I managed to recover it by flashing just the stock UVLH1 kernel.
There was also a PIT file packed with Odin which I removed before flashing the Kernel.

I know this is a basic question but did you run Odin as administrator?
Thrown at your face by my T989

Yes^
Sent from my SAMSUNG-SGH-T989 using xda premium

I'm sure they were running Odin as administrator, but I had to ask to cancel that out.
Thrown at your face by my T989

[Q] Need help ASAP! :c

Hello all, My name is Zach. I've been around XDA for a while, but haven't really posted anything, I thanked devs for work and have been flashing my phone for a while now. Well, last night, I was exhausted, and shouldn't have done what I did. I flashed the full "CODE_SPH-D710.GA10_818252_REV00_user_low_ship.tar.md5" to my phone via mobile odin from an ics rom (Phantoms ff18 I believe). Everything was going fine until the phone just shut off, and it booted straight into recovery mode.
Well now my phone will not boot, and I have no access to my external memory card via CWM-based Recovery v5.0.2.3 that was installed from the tar. All of my roms are on my external.
Every time I plug it into the computer I get "USB device is not recognized" and it installs an "Unknown Device" driver from windows. So I can not mount it in CWM to send the files to internal.
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?

I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium

evo3d6 said:
I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I have tried both my laptops, original cord, multiple other cords, have tried wiping in the CWM to nothing new, I do have the correct drivers and have tried multiple versions of them :/
Opening a one click and plugging the phone in just gives me "USB device not recognized"

Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium

Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app

evo3d6 said:
Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Maybe it stuck from phantom's ff18 rom? But yes CWM-based recovery 5.0.2.3
If I could get it to recognize my external SD card then I can flash a rom.
chris-allen said:
Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I hope its fixable :/

Get a Micro SD USB adapter. You can transfer the files with that.

Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.

ZachZombify said:
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?
Click to expand...
Click to collapse
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.

graydiggy said:
Get a Micro SD USB adapter. You can transfer the files with that.
Click to expand...
Click to collapse
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
caaznkid said:
Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.
Click to expand...
Click to collapse
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
Febby said:
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.
Click to expand...
Click to collapse
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.

ZachZombify said:
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.
Click to expand...
Click to collapse
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link

If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium

bigdaddy619 said:
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link
Click to expand...
Click to collapse
I tried this, but even after uninstalling the sammy drivers, some remains in the "update driver" thing. I'm still getting "USB device is unrecognized"
Tr0LL-$_$ said:
If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Read the original post , the phone does NOT boot into android, it stays on the splash screen, forever.

Is it possible to boot an android OS from my external memory card? I know you could do it on the NOOK Color

Any help at this point would be greatly appreciated.

ZachZombify said:
Any help at this point would be greatly appreciated.
Click to expand...
Click to collapse
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?

There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.

MoHoGalore said:
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?
Click to expand...
Click to collapse
Id didn't die, it just turned off, and restarted straight into the recovery. I have tried 3, and 4 different cables, the SD cards reads in the computer but isn't showing up in the recovery, I get "No files found" and since I cant boot, I cant change the directory for the SD card.
PanchoPlanet said:
There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.
Click to expand...
Click to collapse
Yes, But hopefully my phone is revivable!

Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2

MoHoGalore said:
Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
I've tried a few different versions, but I've been trying to use a one-click that way it will just install everything