Related
Hey guys,
I've been prowling around these sectors ever since I got my Xoom, searching for the perfect case.
What I wanted:
The flexibility of the Zoogue case really appealed to me - I like the idea of being able to choose the angle of viewing. I also wanted any case to be able to be able to provide a setting for only a slight tilt when I wanted to type.
BUT the high price tag really put me off.
Also, I wanted it to be pretty thin. The Xoom is big enough without me adding to its bulk.
After much searching, I think I found the perfect one, so I thought I'd share my experiences (Here's the link where I bought it from: http://www.ebay.com.au/itm/Black-Fo...Accessories&hash=item3f0a05cb28#ht_3816wt_947)
Firstly, the price tag attached to this thing is ridiculously awesome. At first, I bought it thinking 'why not? it's less than $25!', but the product turned out to be even more awesome.
Firstly, it's really thin, but covers the tablet nicely. Secondly, to a certain extent, you can also choose what viewing angle you want, which is awesome. I say to a certain extent, because after a while, you run out of cover to stick the velcro on (have a look at the attached picture)
All the cutouts are there, but you can't charge with the case closed. I don't think this is a problem, because the cover folds back on itself nicely, so you can keep it open to charge. Which brings me to the next plus: it's designed so that it folds back on itself and it's actually pretty comfortable to hold in portrait mode (I've heard that this isn't the case with the official Moto one).
The only minor flaw I've found is that on mine, the top left corner is slightly higher than the top right - what this means is that the front-facing camera is covered ever so slightly by the strip of leather running under it. The picture I attached kind of exaggerates it a bit; it's not that bad. When I booted up the front-facing camera, there's just a line across the very bottom of the image. I'm not sure if this is on all their cases, so it might just be mine.
One more note: When I first heard about cases using velcro, I immediately wondered if the velcro would wear out over time, like in some of my bags. If you're also wondering that, then don't worry! This doesn't use the traditional velcro. You know how traditionally, the fuzzy part has all the loops and the the other part would like... 'hook' onto it and that's how it stuck? Well, this uses a different sort... one that looks like it won't wear out easily. Also, this case is pretty damn sturdy when you've got it propped up. I've tested this out extensively, and even when poking at the screen with a fair bit of force, it never topples.
Finally, before anyone asks: no, I'm not in any way affiliated with the seller, I'm just one super-happy customer. Even though it says it's free shipping, they still provided tracking for me. They even took a picture of the package before they sent it off and sent that to me, which was an eBay first. Plus, the person dealing with the emails just seems really nice, based on the correspondences I've had.
So pretty much, this case is amazing (for me, anyway). I don't think it's real leather, but for under $25, I wasn't expecting it. Plus, real leather is a ***** to take care of, anyway. Whether you need this case will probably come down to what you want out of a case, but this one has been pretty versatile for me (I've had it for about a month now).
EDIT: I didn't realise how much I wrote.... can you tell I'm procrastinating?
EDIT2: I forgot to add that there's even a magnet that holds the cover closed. It's not too strong but not too weak, either. Quite nifty, actually!
screen
is the screen filtered
wyllem said:
is the screen filtered
Click to expand...
Click to collapse
Nope, there's nothing on the screen area at all. That's my matte screen protector that I bought off eBay. It was the cheapest one I could find and it actually works quite well!
i got this one. will post pics and give feedback as soon as i got it.
Well, I really like it myself, so it'll be interesting to hear feedback from other people too.
And daaaang it, it's on sale now (I hate when things go on sale after I buy it!) Oh well, it was already cheap to begin with
Has anybody tried the tetrax mounts yet with their galaxy nexus? Before I purchase one I'm curious of two things.
1. How well does the the magnet stick to the battery door since the battery cover is textured? I have an extra cover that I'll use simply for this.
2. Does the magnet interfere with the NFC and/or screen at all?
In case your not sure what I'm referring to:
http://store.tetrax.us/xway-line/fixway
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
MetalMessiah78 said:
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
Click to expand...
Click to collapse
Thanks,
So you've actually tried it on the GNex and it don't stick very well? Did you by chance try holding it on there for several hours with a strong clamp or anything? I really want one of these but worried it's a waste of money with this phone
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
MetalMessiah78 said:
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
Click to expand...
Click to collapse
Would you mind holding up one of the magnets to the battery door and test out the NFC to see if it interferes with it (if you have the ability to). This is my main question as I could always put the magnet on a case I guess.
Thanks!
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
MetalMessiah78 said:
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
Click to expand...
Click to collapse
Awesome so yea I don't think it'll interfere because I was thinking the part you stick to the back of the phone is magnetic, but if your saying it's not all should be well. Either way I went ahead and ordered it yesterday anyway so I'll figure out a way to get it to stick to either the door or a case. Thanks for your insight!
Nope, it's just a metal button. It actually comes with 4 or 5 different ones of all sizes and styles.
I have this installed on my nexus, I put the mount on my dash and the NFC sticker on my knob for the ac that get covered up. Everytime I put my phone on the mount, the nfc changes it to car mode, volume up, full brightness and launches sirius xm radio...works very well, sometimes I have to move it a bit to get to read the nfc, but thats only cause i have the nfc a little too far at the bottom of the phone and it mounts at a slight angle, not due to any interference at all. I have NFC chips all around and never have problems reading them at all, probably a good idea not to mount the metal chip right in the middle of the battery area, just in case. I also used a clamp to hold it on for about 3 or 4 hours and has had little trouble sticking to the texture.
I have had a few incidents if I pull off the phone, rather than slide it off the backing will actually unclip a single clip.
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
MetalMessiah78 said:
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
Click to expand...
Click to collapse
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
dcoy82 said:
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
Click to expand...
Click to collapse
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
A quick search came up with this: http://www.tagstand.com/
Seems like this could open up a whole line of fun options. Would love to hear how others have done it, though.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
dcoy82 said:
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
That is so awesome. This is my first phone with NFC so I'm barely starting to learn all the cool things that you can do with it. I tried Android Beam for the first time with my brother on Tuesday and it works great, though I wish you could beam other things such as pictures. By the way, the metal button does not interfere with NFC. I will let them know that you recommended me. Thank you!
If your interested in NFC, here's a few spots that got me started
http://androidforums.com/nexus-s/336155-what-do-you-use-nfc-tasker.html
http://www.readwriteweb.com/archives/weekend_project_make_your_own_nfc_tags.php
http://www.youtube.com/watch?v=LnqmyNEQPq0&feature=email&email=comment_reply_received
and the tags I bought were from here:
http://tagsfordroid.com/tags/Home.html
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
by itself i'm not sure nfc task launcher does it for me, but in combination with tasker, it's ridiculous how much can be done....would still love to see what others have come up with.
I love those stickers with the Android! Thanks for the links. I will need to read up on it more. I am definitely interested. This is a lot more exciting stuff then what Google showed off at the I/O last year!
Thats a good idea. Being in IT, we have dead Hard Drives laying around that have awesome magnets in them. They're real slim. I bet I could superglue one to my nexus's battery cover for under the TPU case that would hold. They're thin so it might not screw with the case (but it might).
ejkeebler said:
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
Click to expand...
Click to collapse
Yeah, it looks like it's $8 for 2. I just picked up 5 over at tagstand.com for the same price and found 10 for $13 over at http://buynfcstickers.com.
Hopefully you guys are all having good experience with the guy at tag stand. His customer service was great for me and I'll definatley be going back there in the future.
Oh and by the way, I got my new tetrax magnet set in today and not having any issues with the magnet at allowing necessary nor with the metal part sticking to the stock battery door. Only real issue so far is you have to slide it off just right or the battery door just pops off the nexus lol. Highly recommend though!
Sent from my A500 using Tapatalk
Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime
Im not 100% positive, but i think this will mess your GPS and NFC obviously.
evochuck said:
Im not 100% positive, but i think this will mess your GPS and NFC obviously.
Click to expand...
Click to collapse
Me either but when mine comes I'll post a review with pics and a video after some testing.
Although I can't test NFC. I will post GPS results from Google Navigation.
Sent from my Galaxy Nexus using XDA
Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.
wakd said:
Looks good, went to buy one for holding my Nexus in the car for $35. Went through to Paypal - shipping to Australia? $45!!!! NOPE.
Click to expand...
Click to collapse
That's unfortunate. Did you try to email them to see if they can help you with possibly offering different shipping options?
Saw these guys at a small town fair in Louisville, CO a week ago. Looked like a good product and the guys who own the company were very enthusiastic and helpful. I specifically asked about GPS interference etc. and they said they'd evaluated several phones with no issues.
I also expressed concern about the size/thickness of the engagement point on the phone and they said that they were working on a lower profile version.
Would really like to see these guys do well. Another small business emerging from middle-class America. Gotta love that.
Similar idea to tetrax, but may be easier to find a mounting spot since it looks like it doesn't need the same sq inch spot if you're not using the vent mounted version.
Wow, this is awesome and perfect for my needs! Just went in for one!
I have a window mount currently but it's a pain if I want to rotate it at all because you have to loosen the ball joint and then tighten it back up. And it's almost impossible to do it with the phone in the holder while keeping it at the angle you want.
That, and the suction cup will fall off from time to time. I've also gotten "yelled at" by a cop for having it up as well, so this will "obstruct my view" way less!
This is so much simpler to use, even though it will add a slight bit of bulk.
blue2107 said:
Anybody heard of this new car mount yet?
Steelie Mobile Device Holder
They also have an iPad tabletop stand.
Just ordered the car kit cause It looks like a great product. I love this idea!!!
The best thing is that if you send them your case. They'll punch a hole in it so that the magnet can mount straight to the phone and is a little more discrete.
They were originally on Kickstarter and almost doubled their goal.
Just wanted to post/support a (what seems to me like a great product) that is MADE IN THE U.S.A.
What do you guys think?
And no I am not affiliated with them in any way.
*****Update 5.16.12*****
Just received the car kit!
Includes:
1 x STEELIE Ball
1 x STEELIE Socket
1 x Alcohol prep pad
1 x Primer stick
1 x Instructions
Uploaded some photo's to show all that is included with instructions.
Also dims of "STEELIE Ball" (for dashboard) and "STEELIE socket" (for phone).
Will update in a few more days with results in
*Ease of use
*Ease if installation
*Durability
*GPS interference (if any)
*Anything you all might ask in the meantime
Click to expand...
Click to collapse
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.
Let us know how the thing feels with a big ol', honkin' magnet on the back of it. I'm intrigued, but think having a magnet the size of a 50-cent piece on the back of my GNex would make my having a pretty custom case rather pointless.
The site also says it doesn't interfere with NFC. I'm dubious and would love to hear from some third parties.
shanek17 said:
Thanks for posting about this here, Iv been researching this product everywhere that I can, but its a hard product to find info about, and whats even worse is that the company has not returned my calls or emails in 3 days since contacting them. Either way I found the steelie product on sale here and I already bought it. http://www.123inkcartridges.ca/accessories-product/ST_C.html and now Im hoping it can be used with my galaxy note i717. Now this is a big phone, probably the biggest and heaviest on the market and im worried it will not work. Does anyone know if my phone will work? Also the steelie on this website looks different than all the other steelie pictures iv found, is the one I bought an older or newer version of the steelie? I already contacted 123 ink cartridges and they assured me that its not counterfeit.
Click to expand...
Click to collapse
NEVER MIND! the one i bought was a counterfeit... lame. oh well im getting a refund on it.
Any updates?
I see that they offer the Steelie Magnetic Phone Socket for purchase by itself, but dont see it listed for sale anywhere. Would be nice for different cell phone uses that drive the same car. I guess you could always mount it to a easy to swap out phone case if you have the same phone as other users.
DODOcase has revealed their line of products for the new Nexus 7. For the crowd that desires a more premium offering when it comes to device preservation.
**DODOcase Nexus 7 2013
I like the look of the dodocases, but the least expensive cover (34.95) has a mention that they recommend holding the device in with glue!
The more expensive cases don't seem to have any superior retention strategies.
I'm surprised. When I made a very similar case for my nook color, I spent time figuring out how to fit latches at the lower left and upper righthand sides so the device would stay in place even if the case opened.
The one on the upper right was movable, so I could release the Nook for the (many) times I wanted access to the sdcard slot.
With real tools, I'd have thought Dodo would've been able to do something similar by now that looked better than what I came up with. (Mine was a half a stopcock fastened inside the cover. I took a hacksaw and cut one of the "ears" off the stopcock, then cut the total length of the unit to the right length for my purpose. With that done, the half-eared top can be removed from the butt end, and screwed in in reverse so the wide end is flush with the cover and the remaining ear is able to rotate out to hold the device in, or rotate back to let you remove it from the cover.)
Pad and Quill have a nice computerized lathe as well, and I think their cases are better than the Dodocases. (Dodo benefits from being in San Francisco and able to invite the tech press to visit.)
The P and Q cases now have a kind of retention system in them, nice to see someone at least trying.
http://www.padandquill.com/all-pq-cases.html
Sadly, only available for Apple and Amazon devices at this time.
Hmm, where do you see the suggestion of additional glue? I had the hardcover classic for my original - ended up handing it off as I preferred my Treegloo case (won't be doing that again) - and the adhesive strips were more than strong enough during my use and the use it got from the other party. Never had to seek out additional means of securing the device, and obviously resorting to glue would be a terrible alternative lol
I'm assuming the more traditional bookcase styles still have the same leather inserts they used before to adequately secure your device. I haven't heard any horror stories and, truthfully, while I can't vouch for that specific model, I've heard nothing to suggest they don't hold your device as securely as a Portenzo or Treegloo.
It is too bad that P&Q don't have an offering, but one can hope! Some good alternatives, though, in Portenzo and the aforementioned DODO.
Check ou the "super duper adhesive" section on this listing for the hardcover classic.
http://www.dodocase.com/products/hardcover-classic-for-nexus-7-2
This is the closest thing I see for what you're talking about...?
Industrial-grade adhesive used to secure the Nexus 7 is reusable and residue-free. Wiping the adhesive down with water restores the stickiness.
Click to expand...
Click to collapse
It's a double sided adhesive tape, 3M, that can have the stickiness restored by wiping a damp cloth on it. Should the adhesive even need it. I'm not sure where you're getting the suggestion to use additional glue. Sorry. This is the method of holding the device in this particular case. It may sound kind of odd, but I can attest to the adhesive working as advertised. As for the proper bookcase styles; the leather inset works as advertised, too, to securely hold the device. No further means of retention required.. DODO may not offer the same level of options as Portenzo, but they are quality cases made with quality materials. I can attest to that.
Sent from my Galaxy Nexus
We're talking about the same thing, it's a matter of how you apply the adhesive to the device. I had not realized they were talking about double sided tape.
My point is that I'm disappointed that the high end case makers have done so little about keeping the devices in place. I came up with a latching mechanism that leaves the device free of adhesive. It still works 2+ years in on my GFs case and both my nieces' cases, keeps the device in the case even upside down with the cover open.
I'd rather buy a nice case that can do that than make another myself, but I'm not interested in buying a pretty case that isn't as good as cases I've made, since they came out looking great.
Attached is a pic of my gf's case after 2+ years of daily use, showing the latches and magnetic closure. sleep / wake by cover isn't a feature of the nook tablet but would be trivial to build into one of these as well.
I had a Portenzo case (and ordered a new one). I never had my old N7 fall out. Even when I went to sell it, I had a good time peeling it off my Nexus 7. Does a great job, cleans up with water, and is ready again. I removed mine a few times during the trial run but eventually just left it alone. I didn't have the wood around mine either, so the glue is really good.
Shame these are so expensive. Almost $40 after shipping. I know each one is custom made, but they don't look too complicated. Oh well. Portenzo people are really cool, so I don't mind paying a little extra for some good customer service, good product, and a good laugh (you ever chatted with them?).
roustabout said:
My point is that I'm disappointed that the high end case makers have done so little about keeping the devices in place. I came up with a latching mechanism that leaves the device free of adhesive. It still works 2+ years in on my GFs case and both my nieces' cases, keeps the device in the case even upside down with the cover open.
Click to expand...
Click to collapse
I see, but not sure why you think these cases need any additional means of securing the device. A latching mechanism would certainly not be needed, and would only serve to spoil the appearance of the case. And there is no residue left over on the actual device with the aforementioned models. The adhesive is a curious means of securing the device, and I can understand the skepticism, but it works extremely well in my experience.
@player911 I do agree that even the cheaper models are more expensive than most would want to consider, but such cases are meant for a particular crowd.
Ordered mine with portenzo
Some decent selection.. I have a P and Q with my Ipad and like these better.
http://shop.portenzo.com/new-nexus-7/
Portenzo has some very nice options :thumbup:
Sent from my Nexus 7
mmegalodon said:
I see, but not sure why you think these cases need any additional means of securing the device. A latching mechanism would certainly not be needed, and would only serve to spoil the appearance of the case. And there is no residue left over on the actual device with the aforementioned models. The adhesive is a curious means of securing the device, and I can understand the skepticism, but it works extremely well in my experience.
Click to expand...
Click to collapse
Well, the use of adhesive is (to me) an additional means of securing the device. And I didn't come up with my mechanism for it idly - I repeatedly had the devices fall out while reading, especially in bed.
It is possible to make a latching mechanism that doesn't spoil the look if you have the right tools and time. Two years is more than enough time. One very simple mechanism would be to put one of the wood sides (probably the one normally at the 'top') on a hinge (countersunk underneath) and have it slot into the two sides it abuts with a swiveling peg latch mechanism on either end.
Make all four sides not rectangular but 3/8" at the base and 5/8" across the top and you'd have a natural and simple slide-in, slide-out retention bezel. It would look very, very similar to the current line of products.
And now that I've thought about it, I think I have the parts in the house to make one, and I may do that although I'll probably use jewelry hooks to catch the top beam against the cross beams.
roustabout said:
Well, the use of adhesive is (to me) an additional means of securing the device. And I didn't come up with my mechanism for it idly - I repeatedly had the devices fall out while reading, especially in bed.
Click to expand...
Click to collapse
The adhesive is the only means of securement on this particular model. And this won't be happening, which is why these (all their models, including the likes of Portenzo, Treegloo) cases don't require additional means of retention.
It is possible to make a latching mechanism that doesn't spoil the look if you have the right tools and time... ....It would look very, very similar to the current line of products.
Click to expand...
Click to collapse
I'm all for DIY, so if you can make a case that looks half as good as a DODOcase - or a Portenzo - I would be genuinely interested in seeing it.
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Tonesav said:
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
I'm looking to buy still, just got my s8+ a couple weeks ago, with the unveiling of the note8 I almost took it back
as of right now for in the car I'm using https://www.amazon.com/BESTEK-300W-Power-Inverter-Adapter/dp/B004MDXS0U/ with cables
not sure I want to have to add in something to a case to make it compatible I'd rather the case be compatible to begin with, many magnetic chargers work just fine without add ins
https://docs.google.com/drawings/d/10wBkiHyNDZF969vzCDtKLQ8TI5XLnB5wJ3GOLJJhA-8/edit?usp=sharing
basically just imagine some time on the dremel to cut out everything covering up the back as much as possible except maybe leaving a bit near the edges
if I have the ring it'll be near the power button
and the kickstand will be probably above the camera or down by the fcc text, very small chance I do it vertical by the bixby button
pair it with a belt clip, and maybe something like a folio cover under the screws if I do feel like having cards
if I can do this with existing parts and a dremel why can't one of these case makers?
I'm trying to figure out how I would do a swivel like the ring but with something as long as a kickstand for more angle options, found one custom stent on a case that could work, not sure yet if that's how I want to do it?
figured it out, answer is no kickstand, there's 3 places I legit need a kickstand and I can just get stands and put them there
apparently there isn't much of a phone case modding scene I can find.... does everyone just live with the cases they buy? can't everything be improved with some ingenuity?
My new case, ticks most of the boxes
https://www.amazon.co.uk/XOOMZ-Detachable-Blocking-Magnetic-Leather-Brown/dp/B073QJ1N8P
biotoxin said:
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
Click to expand...
Click to collapse