Related
What is the best thinnest case for the samsung captivate!
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App
i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?
fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?
Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266
Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.
Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place
are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface
I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.
MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.
Amzer argyle for $4
Sent from my GT-I9000 using XDA App
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.
All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.
+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.
Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app
My wife has the Case-mate tough case for her Inspire 4G and I love that case. Unfortunately, they don't make cases for the Atrix yet. Any one have any ideas on a similar 2 piece rubber interior with the hard shell? I really like the design and protection it offers. Thx in advance!
Get the Otter Defender Case. I have dropped my phone plenty of times and there is no sign of damage to my Atrix.
Otterbox Commuter
it has silicone (rubber-style) inside with a hard shell cover outside. Minimal size with maximum protection.
facetubespam said:
Otterbox Commuter
it has silicone (rubber-style) inside with a hard shell cover outside. Minimal size with maximum protection.
Click to expand...
Click to collapse
Agreed I love my Commuter, and it matches what the op asked for better than the defender.
Defender - Hard plastic inside/ soft rubber out
Commuter - Soft rubber inside/ Hard plastic out
Try the $5 hard case from Amazon
I have tried 4-5 different cases ranging from $3 to $30 and I ended up with the $3 hardcase:
(1) $4 Silicon case: it got a little loose after a few days. Would come out of the sleeve if yo drag it too fast from the pocket. I still have 4 of different color at home.
(2) $25 feather case: it is a one piece design, basically protects the batter cover but not much on the front. Returned it.
(3) Otto case: Way to bulky! The whole idea to get an Atrix is for its sleekness!
(4) $3 hardcase (black) from Amazon: I love it the best. It does not add too much to the phone (1mm) and it fits very tight! It gives enough protection on the front (the edge on the front raises about 1mm). The only caution is that once it is installed, it is very hard to remove it. You can remove it by plying open the snaps on the four corners using a flathead screw driver, but woul probably destroy the case.
Thanks for the replies guys, I do like the Commuter! Probably gonna order one off Ebay this weekend! I don't like the the hard cases, but I've seen them allow dirt inside and end up scratching the plastics on the backs of phones.
Speck Candyshell? rubber interior, hard plastic exterior
Purple Drama Llama said:
Speck Candyshell? rubber interior, hard plastic exterior
Click to expand...
Click to collapse
have the speck case droped it one time phone poped out of the case and got scratched up do not recommend it go otter box
Well I have to vote for the spek case. I dropped my case and it cracked the case but phone was ok and stayed inside the case. I went and got another one, I find the otter box a bit bulky.
Both cases are very good IMHO
+1 for speck case, great size to protection ratio!
Sent from my MB860 using XDA App
Official Moto Ruggedized replacement battery cover at cnn.cn. In stock and shipping. Some good discussion on this as well as a youtube review can be found on here http://forum.xda-developers.com/showthread.php?t=1020143
I've had it for a week and very happy due to the minimalistic design.
get either an seidio innocase or get an incipio feather case, those 2 are my personal favorites.
the innocase has a nice pad inside so it won't scratch the phones battery cover,while keeping it as small as possible.
the feather case is for the minimalist look, least amount of space consumption and the best for docks so you won't have to pull it out...but its a little fragile, it will protect for falls since it adds a little gap to the front but most likely the fall will take the hit and crack the case.
if you're looking for something similar to the case-mate cases, go for the sidio.
Incipio
Sent from my MB860 using XDA Premium App
I highly recommend one of the glossy black TPU cases you can find off Amazon: $8.50 before tax.
Check these ones out. I'm currently using the plain black and it is very nice.
http://www.seidioonline.com/category-s/5684.htm
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Personally I like the Leather style flip cases, The one that doubles up as a wallet.
http://www.ebay.co.uk/itm/BLACK-WAL..._MobilePhonesCasesPouches&hash=item3374db7913
I would never pay more than £10 (delivered) for a case.
in terms of slimness i've basically narrowed it down to two giants.
1. sgp ultra thin
2. casemate barely there.
not sure which ones better but from what i can tell they're pretty much the same, both at a hefty 25 bucks.
anyways, i'm in the same boat as you. XD
not sure which case to get.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the rearth and it is very slim, the only down side it is a beeeoootch to take off (i have a dock/charger for the phone) and if you take it on and off a lot it cracks and the part closet to the usb port cover, nothing earth shattering it actually makes it much easier to take the case off - that and the sgp ultra clear and it is almost like having nothing on the phone at all.
I have used diztronic cases for the last year (for my SII and now my N7000). They are very similar to the boxweave case you posted.
http://www.amazon.com/Diztronic-Fle...0386413&sr=8-3&keywords=diztronic+galaxy+note
As you know TPU protects like a silicon case but doesn't stick in your pocket or collect lint and dust due to it not being "sticky" feeling. I recently sold my SII for over $300 after 8 months of daily use because my SII was in perfect condition as a result of being in a diztronic tpu case. No, I never dropped the phone on cement or anything but I dropped my SII on the carpet from 5+ feet and the phone was unchanged when I picked it up. Didn't pop out of case or battery, etc. Because the tpu cases have a 1/8 or so "lip" on the front they also allow the phone to be placed face down on flat surfaces. IMHO and experience, a good tpu case is all you need to fully protect your phone unless you work in construction or somehow expect to drop it on cement.
So, my vote goes to the boxweave or diztronic cases. BTW I got 2 diztronics for $14 from amazon, the black matte and smoke matte. Great deal!
^I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
Anyway, Thanks for the input so far guys, keep it coming.
bumper TPU from Amazon
I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
first post here,
I have one of these.
search amazon for bumper cases.
I'm not allowed to post urls.
I like it, I have it on right now. What I have is different from what's
in the pictures. No cutouts for the buttons and the other cutouts are not
as big. The covers of the buttons are pretty sensitive, unlike the covers
for the Boxwave type which I got from Hongkong for 2 bucks.
Check amazon out, they have a lot of cases.
I also have the elago Breathe case, I love them I have two.
I ended up taking my chances on this. I guess it's going to be as close as I get. Thanks everyone, I'll let you know how it is when I get it.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the 3 of them
Go for the Rearth Ringke Slim , is THE BEST OF ALL !!!
Hi all, I'm in a similar dilemma.
I've got a choice between these two:
https://www.gearzap.com/media/catalog/product/3/4/34484-2.jpg
and
http://www.ebay.co.uk/itm/HYBRID-SI...lePhonesCasesPouches&var=&hash=item416682f7b6
I know I should pick the Zenus, but would the inside bit that holds my phone scratch the outer bezel? And since the hybrid one has a silicon case THEN a hard outer shell I figured it would be good too. Any ideas?
Thanks!
I use a an SGP Ultra thin. Comfortable case. Considering the size of the phone the case is great. Merges with the Phone. +1 anytime.
I ordered this one http://www.ebay.co.uk/itm/160732471512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It has a stand that works in both axis.
good
Nice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just received my Otterbox Commuter all-black case for my HTC One Stealth Black. I bought it from eBay. I read in another thread about the country of assembly being important for the quality of the case. Although the location of the seller is in the USA, the retail packing of the case says "Assembled in China". However, i haven't found a single flaw with the case itself. It fits my HTC One perfectly. There are no anomalies with the case. I think the Q.C. on the China-assembled units have improved. Anyway, i'm very satisfied with the case itself.
Link to the official product page: http://www.otterbox.com/HTC-One-Com..._htc4-one_color=20&start=1&cgid=htc-one-cases
Here's olis4's youtube video review of the Otterbox Commuter all-black case: http://youtu.be/GpNBThwyubM
On the manufacturer's site, the Commuter case is currently priced at $34.95 but you'll get it cheaper on Amazon or eBay.
My all-black case packaging bears the same SKU: 77-26379 as shown on the official site - you should probably verify if the official SKU matches exactly with what's on the retail packaging, if you happen to have any issues (maybe you didn't get an original case).
Installation of the Otterbox Commuter case:
1. The case itself comes in 2 parts; the soft TPU-like interior half of the case and the outer hard-shell plastic case. You need to install them separately.
2. You need to put the soft case on your phone first. Make sure that the lip of the soft case is positioned evenly all around the screen of your phone - this is important as it will ensure a perfect fit when you put on the hard-shell case.
3. Now, you can put on the hard-shell case, starting from the bottom of the phone, where micro-USB flap is located. I found it easier to start from there and then press the hard case onto the phone as i worked my way up to the top of the phone. You will likely have a little trouble to get a perfect fit right away. The trick is to push the hard case near the top and bottom of the phone, and try to open the flaps so that the hard case can fit otherwise the closed flaps will get in the way. You can just use your nail to pry open each flap, as you continue to push the hard case on. Once you have the flaps open, you can then squeeze the case all around the phone to make sure that hard case fits perfectly, before you finally close the flaps. You should now have your Otterbox Commuter case installed correctly.
Note: I have a screen protector on my phone and it never interfered with the installation of the case. The inner soft case lip wrapped around the edges of the screen nicely and didn't peel off or affect the screen protector in any way.
What make this case special?
1. The case gives a solid and comfortable feel. I am much less worried with this case on my phone, knowing that the fragile aluminium device is protected from any accidental drops and dust. The case is light-weight considering all the protection it offers and it doesn't add too much bulk to the phone. The HTC One's back is naturally curved and the Commuter case retains that aspect of the phone - some cases make the back completely flat.
2. The cut-outs are perfect. Protection has been considered for every part of the phone. Only the power button is left uncovered so as to allow the IR blaster to function normally. The microphone at the bottom, the noise cancelling mic on the back and especially the beautiful case design around the camera and flash give the case a stunning look.
3. The volume buttons are completely protected by the inner soft case and they have to be one of the best i've ever tested on the HTC One. They protrude slightly from the right-side of the case for easy access as you can just feel them without having to look at the phone to find the volume buttons. The soft buttons feel just right - you won't accidentally press them while holding the phone or while it's in your pocket and they are not hard to press either. They have this nice clicky feel to them and are responsive.
4. The lip on the front of the case has a nice sharp angular design. It grips the sides of the phone firmly and doesn't come off easily - not unless you remove the hardshell case first. When placing the phone face-down on any flat surface, your screen should be fine. The front lip forms part of the soft TPU-like inner case, and it prevents your phone from sliding if you were to put it face-down on an inclined (even if it's polished) surface. I tried it and the phone won't budge easily.
5. The earphone's jack port and micro-USB port are protected against any dust and are easily accessible. Opening and closing these flaps is easy. Just use your finger or a little nail-prodding to open the TPU flaps quickly (there is a tiny gap right under the flaps that enable you to wedge your nail into it) and then push the flaps back into place when you no longer need access to those ports. The soft TPU material that make up the flaps are held securely in place as they are squeezed in between the hardshell case cut-outs, so the flaps won't open even if you shake your phone or if it drops.
6. There is a groove where the power button of the One is situated - this allows very easy and intuitive access to the power button and doesn't block its IR transmission. Normally, without a case on, it can be a little difficult to find the power button without looking at the phone.
7. The hard-shell case is actually of a light grainy texture, which makes it even more scratch-resistant. I tried to scratch it with keys and coins but no change, although it will surely scratch if you use something sharp like a knife - but then, i don't see why you would put an open knife in your pocket with your phone. You'll likely get yourself stabbed in the leg before it affects your phone. :laugh:
I've added some pictures below. I think that real pictures of the case give way more accurate descriptions of the actual case than what you see on the official site (usually these are graphic renders and the color reproduction isn't always accurate). By the way, as i mentioned above, i've got a screen protector on, so in the pictures, the phone screen might appear a little bit glossy from the slanted viewing angles. It's not the screen protector that came with the Otterbox. I had that screen protector installed at the shop when i bought the phone. It's just a generic screen protector but it looks fine to me, so i haven't removed it.
I did some research on which color to get before placing my order for the Otterbox Commuter. Initially, i wanted to get the Glacier color, with its inner black and outer greyish hard-shell case. However, from pictures shared by those who bought the Glacier case, the hardshell is actually white. The other color options for the Commuter case are also actually a bit washed out or pale when compared to the pictures on the official site, so the colored cases are not as striking (in my opinion). I eventually decided to go with the all-black case to be sure that i'd get the same color as i would expect.
Verdict: Overall, i'm very pleased with the all-black case. If i had to do any nitpicking on the Otterbox Commuter case (other than the inaccurate representation of the colored cases on the official Otterbox site, which in reality are much lighter in color), it's the power button which could have also been protected whilst enabling the IR blaster to function, using the ingenious design on the UAG case for the HTC One.
UPDATE: Otterbox Commuter v/s UAG
I recently bought the UAG (Aero) case for my HTC One, in order to have a better hands-on comparison with the Otterbox Commuter case.
I have used the UAG case on my HTC One for a week to test it thoroughly and here's my honest review:
The UAG case is probably the best alternative to the Otterbox Commuter case. Both cases offer great protection, have good ergonomics and nice design. However, there are some distinct differences between these two popular HTC One cases:
Positive features of the Otterbox Commuter case v/s the UAG case:
- The headphone jack port and microUSB port are completely protected against dust with the rubber flaps, which open and close easily. In the UAG case, these ports are open. This is the most important difference between these two top cases for the HTC One. If you want maximum protection and you have to choose between those two cases, go for the Otterbox Commuter as it will keep your One's ports clean from dust and other small solids/debris and prevent clogging these ports in the long run (the rubber flaps are a tight fit, so they might even be able to guard against an occasional water splash although i wouldn't recommend testing that deliberately, as the case has no official certification for water resistance).
- less rugged appearance, if you want a case which offers great protection but is more discreet and elegant at the office, with a more subtle appearance. The design around the camera and flash are a nice additional touch relative to the UAG case, where the camera and flash cut-outs are simple.
- retains the original curved back shape of the HTC One while the UAG makes the back of the One completely flat (this is subject to your own liking as some people might prefer the more comfortable curved back of their HTC One when holding it and others might prefer their HTC One to rest flat on a surface without rocking from side to side when using it).
Negative features of the Otterbox Commuter case v/s the UAG case:
- the power button is unprotected. This is probably the biggest gripe compared to the UAG case, which uses a nice design to cover the power button with a cut-out on top, to allow the IR blaster built into the power button, to function normally.
- the design of the UAG case is more distinctive, especially on the back. You can identify it easily (unless you're using a dual color Commuter case, which also gives a unique look). For most people, their first impression when looking at the back of the UAG case, would usually be "built to resist tough conditions", like at a construction site, etc.
- makes the back of the phone completely flat. This might be desirable to some people.
- If you are someone who cares about how quickly you can remove your case, then the UAG can save you a few seconds, as the Otterbox Commuter comes in two parts, so you have to remove the hard case first before removing the inner soft TPU case. The UAG comes in a single piece and you can just pop it out if you like to change cases on the fly while you're out and about. But this is probably a very minor (if worthy at all) argument in UAG's favor.
- the actual colour combination cases don't match what you see on the official site in the graphic renders - the real colours tend to be pale or washed out, except for the all-black Commuter case which looks identical. The colours of the UAG cases, on the other hand, match perfectly. I got the Aero color, which is a dark blue and i was pleasantly surprised as it's a unique colour among all my other cases.
If you like this review, just hit the "THANKS" button! :highfive:
I just received mine today! i ordered the steel blue, which actually is like a cyan.
i really like the case, as unfortionatlly the USB port always gets dirty its very good for this purpose, and it's very light weight too!
i had the original HTC flip case, and SPECK with kick stand, they are larger, less protection and worse grip.
Highly Receommended.
I had the white one for a day. The black one definitely looks nicer. However, I took it back because I have been caseless so long that this added so much bulk (compared to what I am used to.) I dropped my phone 2 days after taking it back, bad luck I guess. Overall, the case doesn't add very much bulk, I just couldn't stand any at all after using it naked for so long.
I've had a Commuter on my One since about 3 days after getting it, and I love it. Definitely not too bulky, and the grip is excellent. The One is like a wet bar of soap with no case. I've dropped it twice, and both times picked it up, dusted it off, and went right back to regular use.
I have had the commuter for 3 months.
I Have dropped my ONE often and thankfully with the commuter case on. The case is not bulky yet does its job for sure. The rubber on the case takes all the impact. I like the extra rubber on the corners as well,, seems to be the place where my phone hits most often when dropped.
Majority of drops are from the couch or bed onto hardwood floors. I have had a good amount of drops in the outdoors at work while standing up as well and onto concrete and blacktop. So far so good!! The Commuter handles my line of work (construction) very well. I added the Mime Ghost screen protector a few days ago and it makes the combo even more AWESOME :good:
Thanks for the review, I've been considering the commuter case, as well as the black/gray/black OEM case here, but I can't seem to find that color to purchase.
I like the case also. The belt clip sucks. Can some one recomend a belt pouch.
Sent from my HTC One using xda app-developers app
peteschlabar said:
Thanks for the review, I've been considering the commuter case, as well as the black/gray/black OEM case here, but I can't seem to find that color to purchase.
Click to expand...
Click to collapse
That red-grey-black case is not OEM - it is actually the official hardshell case for the HTC One called the Double Dip. It's available on Amazon or eBay. It's only available in those three-color combination. If you see any similar case design in any other colors, you're not getting an original HTC One case. I wouldn't advise you to get that case though, as it has been widely reported that it will scratch the sides of your phone as you slide it into the main wrap-around case (the scratches caused by the very-tight case is especially visible if you have a non-silver colored HTC One). Also, the Double Dip case doesn't offer the same high level of protection as the Commuter case, which consists of a hardshell wrapped around a layer of soft TPU-like impact-resistant material. The only advantage of the Double Dip, in my opinion, is the added protection of the speaker grills, which can be prone to scratches, since the grills are also made of aluminium and coated with the same paint as the rest of the phone (unless you get the silver version where scratches aren't that visible).
coldsteal said:
I like the case also. The belt clip sucks. Can some one recomend a belt pouch.
Click to expand...
Click to collapse
I think this might be exactly what you're looking for, as it fits the Commuter and Defender cases for the HTC One: http://www.amazon.com/LEATHER-POUCH...1379675221&sr=8-5&keywords=htc+one+belt+pouch
Thanks, just ordered it.
Thanks !! Just placed the order.
electronical said:
That red-grey-black case is not OEM - it is actually the official hardshell case for the HTC One called the Double Dip. It's available on Amazon or eBay. It's only available in those three-color combination. If you see any similar case design in any other colors, you're not getting an original HTC One case. I wouldn't advise you to get that case though, as it has been widely reported that it will scratch the sides of your phone as you slide it into the main wrap-around case (the scratches caused by the very-tight case is especially visible if you have a non-silver colored HTC One). Also, the Double Dip case doesn't offer the same high level of protection as the Commuter case, which consists of a hardshell wrapped around a layer of soft TPU-like impact-resistant material. The only advantage of the Double Dip, in my opinion, is the added protection of the speaker grills, which can be prone to scratches, since the grills are also made of aluminium and coated with the same paint as the rest of the phone (unless you get the silver version where scratches aren't that visible).
I think this might be exactly what you're looking for, as it fits the Commuter and Defender cases for the HTC One: http://www.amazon.com/LEATHER-POUCH...1379675221&sr=8-5&keywords=htc+one+belt+pouch
Click to expand...
Click to collapse
electronical said:
That red-grey-black case is not OEM - it is actually the official hardshell case for the HTC One called the Double Dip. It's available on Amazon or eBay. It's only available in those three-color combination. If you see any similar case design in any other colors, you're not getting an original HTC One case. I wouldn't advise you to get that case though, as it has been widely reported that it will scratch the sides of your phone as you slide it into the main wrap-around case (the scratches caused by the very-tight case is especially visible if you have a non-silver colored HTC One). Also, the Double Dip case doesn't offer the same high level of protection as the Commuter case, which consists of a hardshell wrapped around a layer of soft TPU-like impact-resistant material. The only advantage of the Double Dip, in my opinion, is the added protection of the speaker grills, which can be prone to scratches, since the grills are also made of aluminium and coated with the same paint as the rest of the phone (unless you get the silver version where scratches aren't that visible).
I think this might be exactly what you're looking for, as it fits the Commuter and Defender cases for the HTC One: http://www.amazon.com/LEATHER-POUCH...1379675221&sr=8-5&keywords=htc+one+belt+pouch
Click to expand...
Click to collapse
Thanks for the info, I had read about the scratches. I don't understand about the color choices though. It clearly shows on HTC's website that there are two color options, but the only one available for purchase (that isn't a knock off) is the red and gray.
peteschlabar said:
I don't understand about the color choices though. It clearly shows on HTC's website that there are two color options, but the only one available for purchase (that isn't a knock off) is the red and gray.
Click to expand...
Click to collapse
HTC only ever made two official cases for the HTC One:
1. http://www.htc.com/www/accessories/htc-double-dip/
2. http://www.htc.com/www/accessories/htc-double-dip-flip/
Are you referring to the second Double Dip Flip case? There are no other official alternatives (not even in color) that exist.
I personally don't trust non-branded cases, as they tend not to fit properly and sometimes even worse - they can scratch your phone due to poor fitting and/or poorly built with low quality materials (the aluminium unibody of the HTC One is especially vulnerable).
electronical said:
HTC only ever made two official cases for the HTC One:
1. http://www.htc.com/www/accessories/htc-double-dip/
2. http://www.htc.com/www/accessories/htc-double-dip-flip/
Are you referring to the second Double Dip Flip case? There are no other official alternatives (not even in color) that exist.
I personally don't trust non-branded cases, as they tend not to fit properly and sometimes even worse - they can scratch your phone due to poor fitting and/or poorly built with low quality materials (the aluminium unibody of the HTC One is especially vulnerable).
Click to expand...
Click to collapse
No, I'm talking about the regular Double Dip case, not the flip. If you look through the photos, there is a pic of the black/gray/black color, and if you click on the Specs tab, look in the color section; it is listed there as an option.
http://www.htc.com/www/accessories/htc-double-dip/#specs
Edit: I apologize the the OP, this is getting off topic for this thread.
peteschlabar said:
No, I'm talking about the regular Double Dip case, not the flip. If you look through the photos, there is a pic of the black/gray/black color, and if you click on the Specs tab, look in the color section; it is listed there as an option.
http://www.htc.com/www/accessories/htc-double-dip/#specs
Edit: I apologize the the OP, this is getting off topic for this thread.
Click to expand...
Click to collapse
I hadn't noticed that HTC put up a second color-combination Double Dip case as available on its website - that's probably because it was never released (from what i found).
Here's a thread about that elusive black/gray/black version: http://forum.xda-developers.com/showthread.php?t=2255928
If you go through the replies in that thread, you'll find someone got that color-combination on eBay and even provided a link. But i seriously doubt that it's official HTC One gear (too many color variations available from the drop-down list).
Also, on the official site, have a look at the reviews (they do mention that the black/gray/black color is unavailable): http://www.htc.com/www/accessories/htc-double-dip/#ratings
electronical said:
I hadn't noticed that HTC put up a second color-combination Double Dip case as available on its website - that's probably because it was never released (from what i found).
Here's a thread about that elusive black/gray/black version: http://forum.xda-developers.com/showthread.php?t=2255928
If you go through the replies in that thread, you'll find someone got that color-combination on eBay and even provided a link. But i seriously doubt that it's official HTC One gear (too many color variations available from the drop-down list).
Also, on the official site, check the reviews section and have a look at the top comment: http://www.htc.com/www/accessories/htc-double-dip/#ratings
Click to expand...
Click to collapse
Thanks for the link, I think I'm just going to end up with the Commuter
Loving this case so far. It looks amazing on the red HTC One.
alxrock said:
Loving this case so far. It looks amazing on the red HTC One.
View attachment 2275181
Click to expand...
Click to collapse
The combo does look GOOD!!
I've used this case for about a month. The rubber side wall next to the USB port is now stretched out and a little loose. I contacted otter box, sent pictures and now have a replacement on the way. Hopefully the new rubber piece holds up better this time around near the USB port.
I have the Cimo Grip case, the Black TPU Verizon Gel Case, and the Radioshack hard clear plastic snap case. The otter box commuter case is my favorite of them all
BygSii said:
I've used this case for about a month. The rubber side wall next to the USB port is now stretched out and a little loose. I contacted otter box, sent pictures and now have a replacement on the way. Hopefully the new rubber piece holds up better this time around near the USB port.
I have the Cimo Grip case, the Black TPU Verizon Gel Case, and the Radioshack hard clear plastic snap case. The otter box commuter case is my favorite of them all
Click to expand...
Click to collapse
I have had mine for 3-4 months now and no stretchy. I have a ruff line of work and hard on my stuff too.
Only problem with mine is it tends to attract lint/ dirt on the inside of the case however it is very easy to clean
Great review! I have the white and grey otterbox that I've only used a few times to work out. I had the uag on my previous phone and I liked the protection and the fact that it was easy to put on and take off. Would anyone want to trade for a case? Preferably the uag
Sent from my HTC One using xda app-developers app
So, ended up with a few different cases via various places, including one I hadn't expected. I didn't really like any of 'em, for different reasons. Here were two, though, I did half-like:
The Diztronic slim black case. Has a nice design and soft rubbery feel to it, but almost too slick... as in might slip right out of my hand. I got this as a freebie when I bought a broken phone. But it goes for $10 on ebay.
https://www.ebay.com/itm/OnePlus-2-...313086?hash=item33db9516be:g:l-AAAOSwRbhaE5DT
Then this Hybrid Armor case.... which I have in a white (as in ugly) color. I paid 3 bucks something for it, so my fault. Cool kickstand shell. But the harder than necessary ribbing left me wishing for something a bit, well, more rubbery and soft. Hmm....
I took the outer shell kickstand off the second case. Would this work? Put it over the Diztronic case and - tight fit! But other than the sligtest lil' bulge at the top (barely noticeable) it looks as thought it came this way. See for yourself (the pic with the white in it is how the Hybrid Case looked before being Frankensteined). And hey... this might work with other slim cases. And again... for 3 bucks for the kickstand.
Alas the outer case with stand has proven too frail.... One of the corners snapped off. Friends who own that case said same happened to them.