Related
CM10 Section
I'm not a developer, im taking effort to put more choices of kernel for our community
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Explanation of Android Governors
Revision Version! Features
Added Governors :-
- Lulzactive
- SmartAssV2
- interactive
- conservative
- ondemand
- performance
IO Scheduler
- noop
- deadline
- row
- cfq
- bfq
- sio
- vr
- Compiled with latest Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8 by Christopher83
- Built with -O3 optimization flag (both kernel and modules)
- CPU voltage control VDD sys interface
- Google Snappy V3 Zram
- 377 Ram
- Lowered display panel voltage
- Improve Responsiveness
- Improve Performance
- dynamic read-ahead
- frandom
- Added NEON compilation flag to VFP module
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fixed 100% battery notification after charger unplug
- Dynamic management of dirty page writebacks credit to Christopher83
- Increase audio loudness
- random tweak - credit to imoseyon
- Dynamic management of timer slack - credits to christopher
- LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas) - adapted by Christopher
- Simple GPU governor for Andreno xxx - by faux
- Lowest frequency 61Mhz enabled
- Implemented UKSM
- Implemented TurboBoost Mods http://forum.xda-developers.com/showthread.php?p=37905307
Features For Before Revision Version!
Added Governors :-
- Lulzactive
- SmartAssV2
- interactive
- conservative
- ondemand
- performance
- SmartAssV3
- Intellidemand
- InteractiveX
- Hyper
IO Scheduler
- noop
- deadline
- row
- cfq
- bfq
- sio
- vr
Features
- Compiled with latest Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8 by Christopher83
- Built with -O3 optimization flag (both kernel and modules)
- OverClock Features
- CPU voltage control VDD sys interface
- SnapDragon Optimization
- Google Snappy Zram
- 377 Ram
- Lowered display panel voltage
- Improve Responsiveness
- Improve Performance
- dynamic read-ahead
- frandom
- Added NEON compilation flag to VFP module
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fixed 100% battery notification after charger unplug
- Dynamic management of dirty page writebacks credit to Christopher83
- Increase audio loudness
- random tweak - credit to imoseyon
- Dynamic management of timer slack - credits to christopher
- LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas) - adapted by Christopher
- Simple GPU governor for Andreno xxx - by faux
- Lowest frequency 61Mhz enabled
- Implemented UKSM
Description
Code:
[I]( SmartassH3 - a "smartassV2 with tweaks by H3ROS" governor! )[/I]
[I]( felix is esclusive nexus kernel )[/I]
[I]( 'nexus' is a governor based on interactive and ondemand created by biagio7xD )[/I]
My GitHub
Installation Guide For Revision Version
1. Reboot To Recovery Mode
2. Clear Cache and Dalvik Cache
3. Flash the zip - will go into Turbo Boost Aroma
4. Choose any size for your swap size - Further Information of Turbo Boost > http://forum.xda-developers.com/showthread.php?p=37905307
5. Auto Reboot after finish Aroma
If had any problem only -
6. Reboot to recovery again
7. Clear Cache and Dalvik Cache
8. Reboot (normal boot)
Installation Guide For Before Revision Version !:
1. Reboot To Recovery Mode
2. Flash the kernel
3. Wipe Cache & Dalvik Cache
4. Fix Permissions
5. Reboot (normal boot)
6. Reboot to recovery again
7. Fix permissions again
8. Reboot (normal boot)
Code:
[I]Credit to :-[/I]
- Our Master [URL="http://forum.xda-developers.com/member.php?u=3044346"][B]Arco[/B][/URL] for his kernel source ([I] go press thanks for any posted by arco :D without he, this kernel wont existed[/I] )
- educk for his tutorial and governors
- biagio7xD for extra governors and SnapDragon Optimization
- Christopher83 that helping me teach how to correct the error and advising me
- Xistance for his teaching
- CastagnaIT for his useful sources
- CyanogenMod developers that developing our CM
- Linaro GCC developers let me using this powerful compiler
- hadidjapri hadiconfig (more RAM)
- keff for OC code
- THANKS for delta-roh and Harbir - Turbo Boost Credits [url]http://forum.xda-developers.com/showthread.php?p=37905307[/url]
- faux for Simple GPU governor for Andreno xxx
- xda-developers.com for all the teaching and members
GitHub
XDA:DevDB Information
[Kernel][CM10] HurtSky's Kernel REV10 24/12/2013, Kernel for the Samsung Galaxy W I8150
Contributors
hurtsky
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: REV10
Stable Release Date: 2013-12-24
Created 2013-09-29
Last Updated 2014-08-21
Reserved
LATEST VERSION REV10 : PLEASE DOWNLOAD IT AT ATTACHED FILE IN THIS POST
Older version can be download at HERE and at first post attached files
Changelogs of Revision Version
Code:
[B][I]REV10[/I][/B] 24/12/2013
- revert high mem > normal RAM size now (i experienced back laggy situation and unstable system process so i decided to revert and test it, frankly it really nice using normal RAM size just like what i already mention before - i wont entertain anymore any request about high mem in RAM size)
- revert UKSM into KSM (i still not really satisfied with experience when using UKSM so i revert it to legacy KSM)
- cpufreq: Add cpu-boost driver (thanks to Saravana Kannan)
- cpufreq: Add a sync limit to cpu-boost (thanks to Rohit Gupta)
- build with ccache (thanks to hadidjapri)
- some old error that i miss-look
- kernel: Prevent unnecessary rfkill event generation (thanks to Vitaly Wool)
- jiffies conversions: Use compile time constants when possible (thanks to Joe Perches)
- fs: vfat: reduce the worst case latencies (thanks to xiaogang)
- softirq: reduce latencies (thanks to Eric Dumazet)
( read my github for explanation of all this changes - i wont explain more detail unless for some reasons )
[B][I]REV9[/I][/B] 19/11/2013
- squashed update to 3.0.101 [EOL] version of kernel
- Add BFS Version !
- enable Ultra UKSM
- ReADD 377 Ram Size
- TEST : Reserve More RAM size due to reducing logger size usage.
[B]REV8 fixes[/B]
- fix WSB again - thanks to Keff
[B][I]REV8[/I][/B] 16/10/2013
- squashed update to 3.0.100
- enable unaligned access
- fix white screen bug - credit to Keff
[B][I]REV7 [/I][/B]14/10/2013
- squashed update to 3.0.99
- minor updates - github
[B][I]REV6[/I][/B] 30/9/2013
- squashed update to 3.0.97
- updated frontswap
- sync with arco latest changes
- disable UKSM
- activate Normal KSM
[B][I]REV5[/I][/B] 15/9/2013
- squashed update to 3.0.96
- sync with arco latest updates - github
- backport zram from 3.7 kernel - credits to boype (modified and adapted for this kernel by myself)
- Implement zsmalloc from 3.7 kernel for better Zram operation - credits to boype
- Implement zcache-main for better Zcache operation
- Reactivate normal KSM - it is better with this all modification
- Test - Implement - Optimize copy_page for modern ARM platforms and Optimize ARM memset and memzero functions - credits to boype (see at my github for more information)
- Enable Compaction - testing mode
- Add SIO Plus I/O / block
- Completed Optimize freezing tasks by reducing task wakeups by Collin Cross - [URL="http://linux-kernel.2935.n7.nabble.com/PATCH-00-10-optimize-freezing-tasks-by-reducing-task-wakeups-td641856.html"]For more information[/URL]
- Tweaks - Deadline: Allow 0ms deadline latency, increase the read speed by xiaobing tu
- Tweaks - adaptive vfs_cache_pressure on suspend / resume ( low vfs_cache pressure values save battery while idle, while
a low value also causes stutter with longer up times )
- Tweaks - BFQ scheduler tweaks (thanks pkgnex & Khrushy from Franco dev team) - credit to boype
- Remove Snappy Google compression support for Zram
- Remove Zram For Android Optimization
[B][I]REV4[/I][/B] 6/9/2013
- Add Zram For Android Optimize
- Enable Cleancache
- Enable Zcache
- Add Lz4 compressor for lib - not enable just to put more features
- Use Snappy Compressor for Lib and crypto
- Remove Turbo Boost - seems it more good in performance without it
[B][I]REV3[/I][/B] 1/9/2013
- Squashed updated to 3.0.94
- Normal RAM size, no high MEM !
- Fix audio lag !
- Minor updates
- Remove all start on boot default for - Dynamic management of timer slack , LowMemoryKiller management of not killable processes -
USE PERFORMANCE CONTROL to enable it > [url]http://forum.xda-developers.com/showthread.php?t=2401988[/url]
[B][I]REV2[/I][/B] 24/8/2013
- correcting Zram Kconfig from old kernel version.
- update Snappy Google Zram Version!
- Remove Unnecessary Commits
- Update LZO compression Lib
- Sync with arco latest kernel 3.0.93
- Modified from beginning
- fix sudden hang during voltage changes
- remove OverClock features - available 61Mhz-1.4Ghz
- remove governors - Only left SmartAssV2 and Lulzactive
- zram source updated !
- Snappy Google compression V3 for zram
- Implement Turbo Boost Mods !
Old Version Changelogs
Code:
[COLOR="DeepSkyBlue"]Arco Kernel with added Governors Only[/COLOR]
[B][I]v1.2[/I][/B] 14/5/2013
-sync with latest arco kernel 3.0.78
[B][I]v1.1[/I][/B]
- sync with latest arco kernel 3.0.72
[I][B]v1.0[/B][/I]
- sync with latest arco kernel 3.0.71
- SmartAssV3
- Felix
- Nexus
- InteractiveX
- OndemandX
- LionHeart
- added sio
- added vr
- Lulzactive
- SmartAssV2
- interactive
- conservative
- powersave
- ondemand
- performance
- noop
- deadline
- row
- cfq
- bfq
- CPU voltage control VDD sys interface ( Adjust Your voltage using any 3rd application e.g - android tuner )
- dynamic read-ahead
Code:
[COLOR="MediumTurquoise"]Additional Optimization Version[/COLOR]
[B][I]V4.0[/I][/B] 16/8/2013
- squashed kernel update to version 3.0.91
- fix lowered WIFI voltage - thanks to [user=4410351]@honeyx[/user] because mentioning it
[B][I]V3.9[/I][/B] 13/8/2013
- squashed update kernel 3.0.90
- Added improve sensitivity from Project Lard
- minors updates
[B][I]V3.8[/I][/B] 11/8/2013
- sync with arco latest version 3.0.89
- fixed usb charging - credit to arco
- added 518Mhz frequency - credit to honeyx
- Fix audio lag while using Lulzactive Governors - credit to honeyx
- Implement Suspenze_Freeze - more battery saver
- Implement UKSM ( ultra KSM )
[B][I]V3.7[/I][/B] 29/7/2013
- Better script in RAMDISK for kernel tweaks - credit to christopher83
- Enable 61Mhz frequency, no more Sleep of Death
- Implement Simple GPU governor for Andreno xxx by faux - test - (more battery friendly)
- Updated Freezer source - refer to github
- Updated Idle CPU source - refer to github
- Updated random source with some hack by Dorimanx - refer to github
- minor update - refer to github
[B][I]V3.6 [/I][/B]25/7/2013
- squashed update 3.0.86
- small update of power management
[B][I]V3.5[/I][/B] 17/7/2013
- squashed update 3.0.86
- Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8
- implement Dynamic management of timer slack - credits to christopher
- implement LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas)
- updated power management sources
- updated voltage regulation - lowered some voltage
- random tweaks
- frandom fix - thanks to keff
[B][I]V3.4[/I][/B] 15/6/2013
- sync to arco latest repo 3.0.82
- Dynamic management of dirty page writebacks credit to christopher83
[B][I]V3.3[/I][/B] 8/6/2013
- sync with arco latest repo 3.0.80
- added intellidemand governor
- removed nexus governor
- frandom fix
- optimized slub allocator
- lowmemorykiller: Voku and Dorimanx tweaks for LMK -credits to Christopher83
- Dynamic Fsync v1.2
- Rwsem Update
- Reenable Gentle Fair Sleepers
- other minor changes- refer to github.
[B][I]V3.2[/I][/B] 28/5/2013
- Compiled with latest Cross Compiler Toolchains - Linaro GCC 4.7.4-2013.05 Toolchains
- sync with latest arco kernel 3.079
- using handi config - 378ram
- revert old audio loudness and change with Increased audio loudness (from Skywalker) (rev 2) - credit to CastagnaIT
- bring back 100% battery notification after charger unplug
- some other minor updates
[B][I]V3.1[/I][/B]14/5/2013
-sync with latest arco kernel 3.0.78
[B][I]V3[/I][/B]
- sync with arco's latest kernel 3.0.77 and others updates
- restart work with new environment
[B][I]Test Version 3[/I][/B]
- Disabled Gentle Fair Sleepers for better performance
- Overclock support added back (thanks to keff)
- Increase audio loudness
- Added Hyper Governor
[B][I]Test Version 2[/I][/B]
-sync with arco latest kernel (3.0.74)
[I][B]Test Version 1[/B][/I]
- sync with arco latest kernel (3.0.73)
- removed some governors (powersave, ondemandX, felix)
- removed OC support
[B][I]V2.2[/I][/B]
- revoke from scratch (latest kernel)
- Lowered display panel voltage
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fsync control
- Fixed 100% battery notification after charger unplug
[B][I]V2.1[/I][/B]
- sync with arco latest kernel 3.0.72
- Compiled with Linaro GCC 4.7.3-2013.03 toolchain optimized for Cortex-A8 cpu with Neon technology support
- revert to 371mb Ram
- Improve Responsiveness
- Added NEON compilation flag to VFP module
[I][B]V2[/B][/I]
- Wifi Fix - ivendor
- SnapDragon Optimization
- Google Snappy Zram
- 376mb Ram
- OC support
- dynamic read-ahead
- frandom
All start on boot default for - Dynamic management of timer slack , LowMemoryKiller management of not killable processes Already been removed !
- USE PERFORMANCE CONTROL to enable it > http://forum.xda-developers.com/showthread.php?t=2401988
Settings of The Available Features
partly been taken from Christopher explanation thread - http://forum.xda-developers.com/showthread.php?t=2172148 all credit go to Christopher83 please thank he for prepare this detail of function
LowMemoryKiller management of not killable processes
This feature allows to define processes and system processes white-lists filled with the preferred process names and to not be killed by lowmemorykiller, unless it is absolutely necessary.
This feature exposes four new lowmemorykiller parameters:
- donotkill_proc, is the flag to enable / disable this feature for the processes chosen by the user
- donotkill_sysproc, is the flag to enable / disable this feature for the system processes chosen by the user
- donotkill_proc_names, is the list of process names (comma separated) chosen by the user to be preserved from killing
- donotkill_sysproc_names, is the list of user system process names (comma separated) chosen by the user to be preserved from killing
When the lowmemorykiller needs to free ram, it will first kill the processes not included inside the two process name lists chosen by the user.
If there are no more standard killable processes, then it will be necessary to kill one of the processes included inside one of the two white-lists, to prevent system hangs, slowdowns, etc.
How to customize the white lists of processes to preserve from killing:
On HurtSky's Kernel the feature is enabled by default and the provided processes white lists are the following:
- donotkill_proc_names = "com.cyanogenmod.trebuchet,com,android.inputmethod.latin"
this means that Trebuchet Launcher,stock keyboard will be preserved from killing
- donotkill_sysproc_names = "android.process.acore,com.android.phone,com."
this means that the system process, the phone process will be preserved from killing
1) By using a customized init.d script (the custom value will be always restored after a reboot, if you don't format the system partition)
- Download the script named 80dnkp
- If the file has been saved with .txt extension (stock browser), rename it by removing the .txt extension
- Edit the file by setting your preferred status and processes list
- Copy the new file inside /etc/init.d
- Give the rwxr-xr-x permissions to the file (read, write, execution for owner, read and execution for group users, read and execution for others)
- Reboot
2) By directly editing the files inside /sys/module/lowmemorykiller/parameters (note that set values will be lost after a reboot/shutdown)
3) By using Terminal Emulator (note that set values will be lost after a reboot/shutdown)
- Open Terminal Emulator
- Run these commands if you want to enable the feature
Code:
# To enable this feature for the processes chosen by the user
echo 1 > /sys/module/lowmemorykiller/parameters/donotkill_proc
# To enable this feature for the system processes chosen by the user
echo 1 > /sys/module/lowmemorykiller/parameters/donotkill_sysproc
- Run these commands if you want to disable the feature
Code:
# To disable this feature for the processes chosen by the user
echo 0 > /sys/module/lowmemorykiller/parameters/donotkill_proc
# To disable this feature for the system processes chosen by the user
echo 0 > /sys/module/lowmemorykiller/parameters/donotkill_sysproc
- Run this command if you want to add, for example, Trebuchet Launcher (CM default launcher) and the default keyboard to the processes white list
Code:
echo "com.cyanogenmod.trebuchet,android.inputmethod.latin" > /sys/module/lowmemorykiller/parameters/donotkill_proc_names
- Run this command if you want to add, for example, the system process, the phone process and DSP Manager to the system processes white list
Code:
echo "android.process.acore,com.android.phone,com.bel.android.dspmanager" > /sys/module/lowmemorykiller/parameters/donotkill_sysproc_names
Click to expand...
Click to collapse
This features currently been disable because normal KSM react more better with current settings
Ultra ksm
UKSM is more optimized and also working for single core systems. using this should give much better ram usage, but at the cost of more cpu usage - ( it seems latest version of UKSM optimized for battery usage also )
In this kernel the UKSM off by default -
How to stop and re-run :
to stop uksm run:
echo 0 > /sys/kernel/mm/uksm/run
for re- run:
echo 1 > /sys/kernel/mm/uksm/run
Redirect to this post if users want to enable it on boot > http://forum.xda-developers.com/showpost.php?p=44606319&postcount=880
This UKSM can be tweaked more by visiting this thread http://forum.xda-developers.com/showthread.php?p=44531620
thanks for @eryzerz for informing this
Click to expand...
Click to collapse
This features also already been remove from package, you can download it from their official thread
Some Information about TURBO BOOST mods http://forum.xda-developers.com/showthread.php?p=37905307 < for futher information ! Please read !
This quote taken from TURBO BOOST thread ! Credit goes to TURBO BOOST DEVELOPERS
Disadvantages of a NORMAL swap file on your sdcard:
A sdcard is always slower than internal memory
You may NEVER unmount the sdcard or connect your phone to your computer, because you then just kill your swap file – it is the same as pulling out the Ram of your running computer!
Disadvantages of a swap partition on your sdcard a.k.a. HARD SWAP (the one that you all always swap ! ) :
A sdcard is always slower than internal memory
You will need a separate partition on your sdcard
You can connect the sdcard to your computer, but you cannot unmount and remove it without powering off your phone – you would kill your swap space immediately!
Disadvantages of a swap file in RAM - a.k.a. ZRAM:
This reduces the already low RAM memory
Leads to many low memory problems, like sense restarts and lags
TURBO BOOST ! PART
Advantages of 98swap_<partition> (TURBO BOOST MODS) compared to the methods above:
It uses internal memory – so it is fast!
This memory is not available to the user (/cache and /system) – so it does not decrease any space given to the user
It does not use your sdcard in any way – so feel free to unmount and remove your sdcard whenever you like – also without powering off your phone!
Disadvantages of 98swap_cache
None - you name it!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FEEDBACKS / QUESTION / BUGS
Normal Question
- how the battery consumption?
hurtsky said:
here my screenshot about idling power consumption.. i let my phone really sleep today more good than before ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
dollyaja said:
I hope the latest build can beat up this one. DOWNLOADING!!
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
- how the Performance?
K_TECH said:
i try to use 0,3-0,8Ghz, & play DeadTrigger,NFS,PES2012,SubwaySurf.. i had no lag too "without tweak"...
Big thanks to hurtsky :thumbup::thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
dec0der said:
playing candy crush, hill climb, minion rush and pou (lolz) NO LAG! i wonder how much max ram can kernel 3.x.x can go... (.)^(.)
Click to expand...
Click to collapse
BUGS ?
Some users reported that incoming call abit slower to wake
- this just because updated of suspended , it make the wake up abit slow but it help reducing power consumption
Click to expand...
Click to collapse
Re: [Kernel][CM10] HurtSky's Kernel V1.0 1/4/2013
First.. thanks for this
Updated to New Version
Re: [Kernel][CM10] HurtSky's Kernel V2.0 4/3/2013
nice kernal!^^
yet now not found bug yet~smooth!haha~
Sent from my GT-I8150 using xda premium
Re: [Kernel][CM10] HurtSky's Kernel V2.0 4/3/2013
New thread and new kernel? Whats the difference? Frandom but no high mem bro? Good job.
Sent from my GT-I8150 using xda premium
---------- Post added at 08:26 PM ---------- Previous post was at 08:23 PM ----------
Cm10 or cm10.1? Confused here
Sent from my GT-I8150 using xda premium
CM10 here.. sorry forgot to edit at top. 376 ram start with V2
smoothest kernel ever tried with games ;D
How sbout batery?
looks good
Nice post, are this kernel compatible with cm10 alpha 7? Sorry for my by english.
Sent from my GT-I8150 using xda premium
Aldich13 said:
Nice post, are this kernel compatible with cm10 alpha 7? Sorry for my by english.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Yes. It is based on latest arco cm10 alpha7 kernel.
Sent from my GT-I8150 using Tapatalk 2
waiting for new kernel (Cm10.1 Alpha 2)
ghost141 said:
waiting for new kernel (Cm10.1 Alpha 2)
Click to expand...
Click to collapse
in cloning process
waiting for cm10 new kernal~XD
add oil~
Sent from my GT-I8150 using xda premium
updated to new version
thx~
will flash it now~^^
Sent from my GT-I8150 using xda premium
---------- Post added at 02:26 PM ---------- Previous post was at 01:41 PM ----------
I already flash this kernal, but it stuck on boot...is it the problem of undervolt too much? batur kernel also happened this be4 ~
Hope can fix early~^^
Sent from my GT-I8150 using xda premium
yugioh93 said:
thx~
will flash it now~^^
Sent from my GT-I8150 using xda premium
---------- Post added at 02:26 PM ---------- Previous post was at 01:41 PM ----------
I already flash this kernal, but it stuck on boot...is it the problem of undervolt too much? batur kernel also happened this be4 ~
Hope can fix early~^^
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
hurm... i see... i will wait others feedback also..
Did not boot for me too. Stuck after Samsung logo. Thank god I back up stock beta 1 kernel.
It suppose to be v2.1 for the latest right? You named it v2.2 there. Is it mistaken for the v2.2 for cm10.1?
-XDA Rocks-
CM10.1 Section
I'm not a developer, im taking effort to put more choices of kernel for our community
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Explanation of Android Governors
Revision Version! Features
Added Governors :-
- Lulzactive
- SmartAssV2
- interactive
- conservative
- ondemand
- performance
IO Scheduler
- noop
- deadline
- row
- cfq
- bfq
- sio
- vr
- Compiled with latest Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8 by Christopher83
- Built with -O3 optimization flag (both kernel and modules)
- CPU voltage control VDD sys interface
- Google Snappy V3 Zram
- 377 Ram
- Lowered display panel voltage
- Improve Responsiveness
- Improve Performance
- dynamic read-ahead
- frandom
- Added NEON compilation flag to VFP module
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fixed 100% battery notification after charger unplug
- Dynamic management of dirty page writebacks credit to Christopher83
- Increase audio loudness
- random tweak - credit to imoseyon
- Dynamic management of timer slack - credits to christopher
- LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas) - adapted by Christopher
- Simple GPU governor for Andreno xxx - by faux
- Lowest frequency 61Mhz enabled
- Implemented UKSM
- Implemented TurboBoost Mods http://forum.xda-developers.com/showthread.php?p=37905307
Features For Before Revision Version!
Added Governors :-
- Lulzactive
- SmartAssV2
- interactive
- conservative
- ondemand
- performance
- SmartAssV3
- Intellidemand
- InteractiveX
- Hyper
IO Scheduler
- noop
- deadline
- row
- cfq
- bfq
- sio
- vr
Features
- Compiled with latest Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8 by Christopher83
- Built with -O3 optimization flag (both kernel and modules)
- OverClock Features
- CPU voltage control VDD sys interface
- SnapDragon Optimization
- Google Snappy Zram
- 377 Ram
- Lowered display panel voltage
- Improve Responsiveness
- Improve Performance
- dynamic read-ahead
- frandom
- Added NEON compilation flag to VFP module
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fixed 100% battery notification after charger unplug
- Dynamic management of dirty page writebacks credit to Christopher83
- Increase audio loudness
- random tweak - credit to imoseyon
- Dynamic management of timer slack - credits to christopher
- LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas) - adapted by Christopher
- Simple GPU governor for Andreno xxx - by faux
- Lowest frequency 61Mhz enabled
- Implemented UKSM
Description
Code:
[I]( SmartassH3 - a "smartassV2 with tweaks by H3ROS" governor! )[/I]
[I]( felix is esclusive nexus kernel )[/I]
[I]( 'nexus' is a governor based on interactive and ondemand created by biagio7xD )[/I]
My GitHub
Installation Guide For Revision Version
1. Reboot To Recovery Mode
2. Clear Cache and Dalvik Cache
3. Flash the zip - will go into Turbo Boost Aroma
4. Choose any size for your swap size - Further Information of Turbo Boost > http://forum.xda-developers.com/showthread.php?p=37905307
5. Auto Reboot after finish Aroma
If had any problem only -
6. Reboot to recovery again
7. Clear Cache and Dalvik Cache
8. Reboot (normal boot)
Installation Guide For Before Revision Version !:
1. Reboot To Recovery Mode
2. Flash the kernel
3. Wipe Cache & Dalvik Cache
4. Fix Permissions
5. Reboot (normal boot)
6. Reboot to recovery again
7. Fix permissions again
8. Reboot (normal boot)
Code:
[I]Credit to :-[/I]
- Our Master [URL="http://forum.xda-developers.com/member.php?u=3044346"][B]Arco[/B][/URL] for his kernel source ([I] go press thanks for any posted by arco :D without he, this kernel wont existed[/I] )
- educk for his tutorial and governors
- biagio7xD for extra governors and SnapDragon Optimization
- Christopher83 that helping me teach how to correct the error and advising me
- Xistance for his teaching
- CastagnaIT for his useful sources
- CyanogenMod developers that developing our CM
- Linaro GCC developers let me using this powerful compiler
- hadidjapri hadiconfig (more RAM)
- keff for OC code
- THANKS for delta-roh and Harbir - Turbo Boost Credits [url]http://forum.xda-developers.com/showthread.php?p=37905307[/url]
- faux for Simple GPU governor for Andreno xxx
- xda-developers.com for all the teaching and members
GitHub
XDA:DevDB Information
[Kernel][CM10.1][3.0.x] HurtSky's Kernel REV8 16/10/2013, Kernel for the Samsung Galaxy W I8150
Contributors
hurtsky
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: REV 8
Stable Release Date: 2013-10-16
Created 2013-09-29
Last Updated 2014-08-21
Reserved
Changelogs of Revision Version
Code:
[B]REV8 fixes[/B]
- fix WSB again - thanks to Keff
[B][I]REV8[/I][/B] 16/10/2013
- squashed update to 3.0.100
- White screen bug fix - credit to Keff
- Enable unaligned access
[B][I]REV7[/I][/B] 14/10/2013
- squashed update to 3.0.99
- minor updates - github
[B][I]REV6[/I][/B] 30/9/2013
- squashed update to 3.0.97
- updated frontswap
- sync with arco latest changes
[B][I]REV5[/I][/B] 18/9/2013
- squashed update to 3.0.96
- sync with arco latest updates - github
- backport zram from 3.7 kernel - credits to boype (modified and adapted for this kernel by myself)
- Implement zsmalloc from 3.7 kernel for better Zram operation - credits to boype
- Implement zcache-main for better Zcache operation
- Reactivate normal KSM - it is better with this all modification
- Test - Implement - Optimize copy_page for modern ARM platforms and Optimize ARM memset and memzero functions - credits to boype (see at my github for more information)
- Enable Compaction - testing mode
- Add SIO Plus I/O / block
- Completed Optimize freezing tasks by reducing task wakeups by Collin Cross - [URL="http://linux-kernel.2935.n7.nabble.com/PATCH-00-10-optimize-freezing-tasks-by-reducing-task-wakeups-td641856.html"]For more information[/URL]
- Tweaks - Deadline: Allow 0ms deadline latency, increase the read speed by xiaobing tu
- Tweaks - adaptive vfs_cache_pressure on suspend / resume ( low vfs_cache pressure values save battery while idle, while
a low value also causes stutter with longer up times )
- Tweaks - BFQ scheduler tweaks (thanks pkgnex & Khrushy from Franco dev team) - credit to boype
- Remove Snappy Google compression support for Zram
- Remove Zram For Android Optimization
[B][I]REV4[/I][/B] 6/9/2013
- Add Zram For Android Optimize
- Enable Cleancache
- Enable Zcache
- Add Lz4 compressor for lib - not enable just to put more features
- Use Snappy Compressor for Lib and crypto
- Remove Turbo Boost - seems it more good in performance without it
[B][I]REV3[/I][/B] 1/9/2013
- Squashed updated to 3.0.94
- Normal RAM size, no high MEM !
- Fix audio lag !
- Minor updates
- Remove all start on boot default for - Dynamic management of timer slack , LowMemoryKiller management of not killable processes - USE PERFORMANCE CONTROL to enable it > [url]http://forum.xda-developers.com/showthread.php?t=2401988[/url]
[B][I]REV2[/I][/B] 24/8/2013
- correcting Zram Kconfig from old kernel version.
- update Snappy Google Zram Version!
- Remove Unnecessary Commits
- Update LZO compression Lib
- Sync with arco latest kernel 3.0.93
- Modified from beginning
- fix sudden hang during voltage changes
- remove OverClock features - available 61Mhz-1.4Ghz
- remove governors - Only left SmartAssV2 and Lulzactive
- zram source updated !
- Snappy Google compression V3 for zram
- Implement Turbo Boost Mods !
Old Version Changelogs
Changelog
Code:
[COLOR="DeepSkyBlue"]Arco Kernel with added Governors Only[/COLOR]
[B][I]v1.1[/I][/B]
-sync with latest arco kernel 3.0.72
[I][B]v1.0[/B][/I]
- sync with latest arco kernel 3.0.71
- SmartAssV3
- Felix
- Nexus
- InteractiveX
- OndemandX
- LionHeart
- added sio
- added vr
- Lulzactive
- SmartAssV2
- interactive
- conservative
- powersave
- ondemand
- performance
- noop
- deadline
- row
- cfq
- bfq
- CPU voltage control VDD sys interface ( Adjust Your voltage using any 3rd application e.g - android tuner )
- dynamic read-ahead
Code:
[COLOR="MediumTurquoise"]Additional Optimization Version[/COLOR]
[B][I]V2.8[/I][/B] 16/8/2013
- squashed kernel update to version 3.0.91
- fix lowered WIFI voltage - thanks to [user=4410351]@honeyx[/user] because mentioning it
[B][I]V2.7[/I][/B] 13/8/2013
- squashed kernel update to 3.0.90
- Added improve sensitivity from Project Lard
- fixed usb charging - credit to arco
- added 518Mhz frequency - credit to honeyx
- Fix audio lag while using Lulzactive Governors - credit to honeyx
- Implement Suspenze_Freeze - more battery saver
- Implement UKSM ( ultra KSM )
- Better script in RAMDISK for kernel tweaks - credit to christopher83
- Enable 61Mhz frequency, no more Sleep of Death
- Implement Simple GPU governor for Andreno xxx by faux - test - (more battery friendly)
- Updated Freezer source - refer to github
- Updated Idle CPU source - refer to github
- Updated random source with some hack by Dorimanx - refer to github
- minor update - refer to github
[B][I]V2.6[/I][/B] 25/7/2013
- squashed update 3.0.86
- small update of power management sources
[B][I]V2.5[/I][/B] 19/7/2013
- squashed update 3.0.86
- Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8
- implement Dynamic management of timer slack - credits to christopher
- implement LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas)
- updated power management sources
- updated voltage regulation - lowered some voltage
- random tweak
- frandom fix
[B][I]V2.4[/I][/B] 15/6/2013
- sync with arco latest repo 3.0.82
- Added Dynamic management of dirty page writebacks credit to Christopher83
- Added Dynamic Fsync from erik96
- fix Frandom
- RWSEM optimizations
- Optimized SLUB memory allocator
- Added Intellidemand Governor
- Increased audio loudness (from Skywalker) (rev 2) - credit to CastagnaIT
[B][I]Test Version 4[/I][/B]
- disable Disabled Gentle Fair Sleepers for better performance
- Overclock added back ( thanks to keff)
- Increase audio loudness
- Added Hyper Governor
[B][I]Test Version 3[/I][/B]
- sync with arco latest kernel (3.0.74)
[B][I]Test Version 2[/I][/B]
- sync with arco latest kernel (3.0.73)
- removed some governors (powersave, ondemandX, felix)
- removed OC support
[B][I]V2.3[/I][/B]
- Lowered display panel voltage
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
[I][B]V2.2[/B][/I]
- sync with arco latest kernel 3.0.72
- Compiled with Linaro GCC 4.7.3-2013.03 toolchain optimized for Cortex-A8 cpu with Neon technology support
- revert to 371mb Ram
- Improve Responsiveness
- Added NEON compilation flag to VFP module
[I][B]V2.1[/B][/I]
- Wifi Fix - ivendor
- SnapDragon Optimization
- Google Snappy Zram
- 376mb Ram
- OC support
- dynamic read-ahead
- frandom
All start on boot default for - Dynamic management of timer slack , LowMemoryKiller management of not killable processes Already been removed !
- USE PERFORMANCE CONTROL to enable it > http://forum.xda-developers.com/showthread.php?t=2401988
Settings of The Available Features
partly been taken from Christopher explanation thread - http://forum.xda-developers.com/showthread.php?t=2172148 all credit go to Christopher83 please thank he for prepare this detail of function
LowMemoryKiller management of not killable processes
This feature allows to define processes and system processes white-lists filled with the preferred process names and to not be killed by lowmemorykiller, unless it is absolutely necessary.
This feature exposes four new lowmemorykiller parameters:
- donotkill_proc, is the flag to enable / disable this feature for the processes chosen by the user
- donotkill_sysproc, is the flag to enable / disable this feature for the system processes chosen by the user
- donotkill_proc_names, is the list of process names (comma separated) chosen by the user to be preserved from killing
- donotkill_sysproc_names, is the list of user system process names (comma separated) chosen by the user to be preserved from killing
When the lowmemorykiller needs to free ram, it will first kill the processes not included inside the two process name lists chosen by the user.
If there are no more standard killable processes, then it will be necessary to kill one of the processes included inside one of the two white-lists, to prevent system hangs, slowdowns, etc.
How to customize the white lists of processes to preserve from killing:
On HurtSky's Kernel the feature is enabled by default and the provided processes white lists are the following:
- donotkill_proc_names = "com.cyanogenmod.trebuchet,com,android.inputmethod.latin"
this means that Trebuchet Launcher,stock keyboard will be preserved from killing
- donotkill_sysproc_names = "android.process.acore,com.android.phone,com."
this means that the system process, the phone process will be preserved from killing
1) By using a customized init.d script (the custom value will be always restored after a reboot, if you don't format the system partition)
- Download the script named 80dnkp
- If the file has been saved with .txt extension (stock browser), rename it by removing the .txt extension
- Edit the file by setting your preferred status and processes list
- Copy the new file inside /etc/init.d
- Give the rwxr-xr-x permissions to the file (read, write, execution for owner, read and execution for group users, read and execution for others)
- Reboot
2) By directly editing the files inside /sys/module/lowmemorykiller/parameters (note that set values will be lost after a reboot/shutdown)
3) By using Terminal Emulator (note that set values will be lost after a reboot/shutdown)
- Open Terminal Emulator
- Run these commands if you want to enable the feature
Code:
# To enable this feature for the processes chosen by the user
echo 1 > /sys/module/lowmemorykiller/parameters/donotkill_proc
# To enable this feature for the system processes chosen by the user
echo 1 > /sys/module/lowmemorykiller/parameters/donotkill_sysproc
- Run these commands if you want to disable the feature
Code:
# To disable this feature for the processes chosen by the user
echo 0 > /sys/module/lowmemorykiller/parameters/donotkill_proc
# To disable this feature for the system processes chosen by the user
echo 0 > /sys/module/lowmemorykiller/parameters/donotkill_sysproc
- Run this command if you want to add, for example, Trebuchet Launcher (CM default launcher) and the default keyboard to the processes white list
Code:
echo "com.cyanogenmod.trebuchet,android.inputmethod.latin" > /sys/module/lowmemorykiller/parameters/donotkill_proc_names
- Run this command if you want to add, for example, the system process, the phone process and DSP Manager to the system processes white list
Code:
echo "android.process.acore,com.android.phone,com.bel.android.dspmanager" > /sys/module/lowmemorykiller/parameters/donotkill_sysproc_names
Click to expand...
Click to collapse
This features currently been disable because normal KSM react more better with current settings
Ultra ksm
UKSM is more optimized and also working for single core systems. using this should give much better ram usage, but at the cost of more cpu usage - ( it seems latest version of UKSM optimized for battery usage also )
In this kernel the UKSM off by default -
How to stop and re-run :
to stop uksm run:
echo 0 > /sys/kernel/mm/uksm/run
for re- run:
echo 1 > /sys/kernel/mm/uksm/run
Redirect to this post if users want to enable it on boot > http://forum.xda-developers.com/showpost.php?p=44606319&postcount=880
This UKSM can be tweaked more by visiting this thread http://forum.xda-developers.com/showthread.php?p=44531620
thanks for @eryzerz for informing this
Click to expand...
Click to collapse
This features also already been remove from package, you can download it from their official thread
Some Information about TURBO BOOST mods http://forum.xda-developers.com/showthread.php?p=37905307 < for futher information ! Please read !
This quote taken from TURBO BOOST thread ! Credit goes to TURBO BOOST DEVELOPERS
Disadvantages of a NORMAL swap file on your sdcard:
A sdcard is always slower than internal memory
You may NEVER unmount the sdcard or connect your phone to your computer, because you then just kill your swap file – it is the same as pulling out the Ram of your running computer!
Disadvantages of a swap partition on your sdcard a.k.a. HARD SWAP (the one that you all always swap ! ) :
A sdcard is always slower than internal memory
You will need a separate partition on your sdcard
You can connect the sdcard to your computer, but you cannot unmount and remove it without powering off your phone – you would kill your swap space immediately!
Disadvantages of a swap file in RAM - a.k.a. ZRAM:
This reduces the already low RAM memory
Leads to many low memory problems, like sense restarts and lags
TURBO BOOST ! PART
Advantages of 98swap_<partition> (TURBO BOOST MODS) compared to the methods above:
It uses internal memory – so it is fast!
This memory is not available to the user (/cache and /system) – so it does not decrease any space given to the user
It does not use your sdcard in any way – so feel free to unmount and remove your sdcard whenever you like – also without powering off your phone!
Disadvantages of 98swap_cache
None - you name it!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FEEDBACKS / QUESTION / BUGS
Normal Question
- how the battery consumption?
hurtsky said:
here my screenshot about idling power consumption.. i let my phone really sleep today more good than before ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
dollyaja said:
I hope the latest build can beat up this one. DOWNLOADING!!
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
- how the Performance?
K_TECH said:
i try to use 0,3-0,8Ghz, & play DeadTrigger,NFS,PES2012,SubwaySurf.. i had no lag too "without tweak"...
Big thanks to hurtsky :thumbup::thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
dec0der said:
playing candy crush, hill climb, minion rush and pou (lolz) NO LAG! i wonder how much max ram can kernel 3.x.x can go... (.)^(.)
Click to expand...
Click to collapse
BUGS ?
Some users reported that incoming call abit slower to wake
- this just because updated of suspended , it make the wake up abit slow but it help reducing power consumption
Click to expand...
Click to collapse
first ! thanks thanks thanks ! nyc work ... smooth+battery saver
nice job
the RAM still 352mb?
hotheabilly said:
the RAM still 352mb?
Click to expand...
Click to collapse
yes.. more RAM still in progress.
hurtsky said:
yes.. more RAM still in progress.
Click to expand...
Click to collapse
thankyou, looking forward for a new version
hurtsky said:
yes.. more RAM still in progress.
Click to expand...
Click to collapse
good luck c:
i think more RAM will give us problem with camera or others, i in way compiling stock RAM and more RAM.. hope you can try it and give feedback
Re: [Kernel][CM10.1] HurtSky's Kernel V1.0 1/4/2013
Hello there hurtsky, add intelidemand and lionheartx if you dont mind xD
Sent from my GT-I8150 using Tapatalk 2
selfishloner said:
Hello there hurtsky, add intelidemand and lionheartx if you dont mind xD
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
will try need see my leisure time
updated V2
hurtsky said:
updated V2
Click to expand...
Click to collapse
downloading
Re: [Kernel][CM10.1] HurtSky's Kernel V2.0 4/3/2013
Its seems WiFi patch made my phone WiFi connection a little strange, its stay in grey bar, not became blue. And I cant access internet with chrome/facebook/twitter. Im using WPA2 router. Anyone had same issue?
-Sent from CM10.1 i8150-
hurtsky said:
yes.. more RAM still in progress.
Click to expand...
Click to collapse
Any issue with switching to front camera?
omegahanggara said:
Any issue with switching to front camera?
Click to expand...
Click to collapse
test it first. that why i make 2 version stock Ram and more RAM.. because i didn't use CM10.1
Re: [Kernel][CM10.1] HurtSky's Kernel V2.1 4/3/2013
hurtsky said:
test it first. that why i make 2 version stock Ram and more RAM.. because i didn't use CM10.1
Click to expand...
Click to collapse
Its okay (both 376Mb and stock RAM)
Btw I tried to forget the WiFi network password, reboot the phone and reconnect/inputting password again and everything is fine now thanks hurtsky.
-Sent from CM10.1 i8150-
Re: [Kernel][CM10.1] HurtSky's Kernel V2.1 4/3/2013
Sorry for this noob question. But can someone give me the instruction to flash this kernel? I am new for this change kernel things
Sent from my CM10.1 Wonder
Re: [Kernel][CM10.1] HurtSky's Kernel V2.1 4/3/2013
How's the new kernel? Downloading it now.
Sent from my GT-I8150 using xda premium
This Kernel is based off the sources of AndreiLux Perseus Kernel (alpha35).
If you consider to thank me, please also consider to thank him http://forum.xda-developers.com/showthread.php?t=1927852
Features (changes compared to Perseus):
- updated Linux Kernel base to 3.0.79
- working for Aosp and Sammy at once (Big thx to Gokhanmoral for making this possible)
- Portet Ezekeel's Touchwake Feature (from nexus s)
- Oc up to 2 Ghz
- updated ROW i/o scheduler
- using Joe RCU
- Backport from Linux 3.5 smp driver parts
- Cm Wifi driver (from D2 Linux 3.4 kernel)
- LulzactiveQ cpu governor (from siyahkernel, thx again to Gokhanmoral)
- Hotplug Cpu Governor
- Proportional Rate Reduction for TCP
http://kernelnewbies.org/Linux_3.2#head-1c3e71416a9fdc2f59c1c251a97963f165302b6e
- improve memcopy/memmove
- Using Voodoo Sound
- mdnie: toggling mdnie negative effect with home button (Gokhanmoral)
- Reverted LED Control
For setting up the Kernel features, I recommend using Trickster Mod (free), until i have added STweaks support
Click to expand...
Click to collapse
Many Thanks to:
- RichMD (I wouldn't have this device without him)
- Gokhanmoral
- Andreilux
- DAGr8
- simone201
- ptmr3
- Stratosk
- RolloS
- kasper_h
- all the others mentioned in the changelogs
N7100 users please use the N7100 kernel
N7105, At&T + Tmo users please use the t0lte Kernel
For support, please use my thread in international section:
http://forum.xda-developers.com/showthread.php?t=2239453
Changelog:
19.04.2013:
- Fixed patch: "LOAD_FREQ (4.61 s) avoids loadavg Moire (thx to Klaus Ripke)", many thx to AndreiLux for pointing and fixing this
- Added Franciscofranco's Touch Boost Control (input boost frq., when screen touched can be set with trickster mod app), including the additions from simone201, but fixed to not beeing stuck at high freq.
- removed LCDFreq scaling mechanism (using touch boost instead)
- fixed charging while device off
- applied a bluetooth patch from cm (might help with bt issues some users were reporting)
Click to expand...
Click to collapse
more to come ...
dual boot kernel is up in my main thread:
http://forum.xda-developers.com/showpost.php?p=41889125&postcount=715
★COMPULSION KERNEL★
This Kernel Is Only Compatible For All T-Mobile N900T, SM-N9005, And Also The N900W8 SNAPDRAGON 800 Quad-Core TouchWiz Samsung Based KitKat 4.4.2 Roms For This Device!
Note To Developers... If You Want To Include This Into Your Rom, Credit Is All I Ask!
Read below "BEFORE" downloading, flashing, and posting questions....
...REMEMBER...
I am not responsible for anything that happens to your device, if your SD card goes dead, and everything else!
COMPULSION KERNEL FEATURES:
GENERAL FEATURES:
★ Built Using: Official N900TUVUDNF9 KitKat Samsung Source Code
★ Supported Filesystems: Ext2, Ext3, Ext4, FAT32, NTFS, USB OTG, exFAT, CIFS, F2FS
★ Linaro GCC Toolchain Version: 4.9-2014.08
★ SETUID Restrictions Removed
★ A Bunch Of CodeAurora Fixes
★ Linux Kernel Version: 3.4.104
★ SELinux Status: Permissive
★ Kernel Compression: XZ
★ /proc/last.kmsg Support
★ ADB Insecured Kernel
★ USB Mass Storage
★ Init.d Support
EXTRA FEATURES:
★ Intelli-Plug CPU Hotplug Driver With Eco Mode
★ Implemented Patches For DriveDroid App
★ Use Android Device As USB Keyboard/Mouse
★ PowerSuspend PM Kernel Driver
★ Imoseyon's Custom Voltage Control
★ Asynchronous Fsync Control
★ TouchWake Implementation
★ Intelli-Thermal Control
★ Dynamic Sync Control
★ Simple GPU Algorithm
★ Faux Sound Control
★ Forced Fast Charge
GOVERNORS & I/O SCHEDULERS:
★ Default CPU Governor: InteractiveX
★ Default I/O Scheduler: Deadline
★ CPU Overclocking Up To: 2.65GHz
★ GPU Overclocking Up To: 450MHz
★ Underclocking Down To: 268MHz
CPU GOVERNORS:
★ Yankactive
★ Nightmare
★ PegasusQ
★ Abyssplugv2
★ Badass
★ Smartassv2
★ Smartmax_eps
★ Smartmax
★ Asswax
★ Dancedance
★ SmartassH3
★ Hyper
★ Intelliactive
★ ConservativeX
★ Intellidemand
★ Conservative
★ Ondemandplus
★ OndemandX
★ Userspace
★ Wheatleyplus
★ Wheatley
★ Powersave
★ Performance
★ Lionheart
★ InteractiveX
I/O SCHEDULERS:
★ Noop
★ Deadline
★ Row
★ CFQ
★ BFQ
★ Test-iosched
★ SIO
★ FIOPS
★ ZEN
★ SIOPLUS
★ VR
★ FIFO
★ TripNDroid
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
* First Thing To Do... Do A Nandroid Backup!
* Download The Kernel.
* Flash The Kernel.
* Reboot Your Device.
* Once Rebooted... DONE!
CHANGELOG
★10.12.2013
- Initial Kernel Release
★10.16.2013
- Gave The Kernel A Name! [It's Now Called The "Compulsion Kernel"]
- Did Some Governor And I/O Tweaks For Better Performance!
- Added Some New I/O Schedulers: SIO, FIOPS, And ZEN!
- Faux's Overall Stats For Quad Core Devices Via Sysfs!
- Lowered MIN Allowed Voltage To 700mV!
- Added Dependencies For OC Ultimate!
- Added Overclocking Up To 2.65GHz!
- Now Comes With USB Fast Charge!
- Added Faux's CPU Freq Limiter!
- Plenty Of Kernel Optimizations!
- Fixed Some ADB Root Issues!
- The Kernel Is Now Insecured!
- Added CPU Voltage Control!
- Some Overclocking Tweaks!
- Fixed Some exFAT Issues!
- Minor Code Clean Up!
- Awesome Battery Life!
★10.17.2013
- Added Three New Governors! [Wheatley, Intellidemand, And ConservativeX.]
- Set MIN_LATENCY_MULTIPLIER To 20 On Some Governors!
- Comes With Intelli-Plug CPU Hotplug Driver With Eco Mode!
- A Whole Bunch Of Intellidemand Boosting Performances!
- A Massive Load Of Intelli-Plug Tweaks And Modifications!
- Tweaks For Faster Wakeup From Suspend!
- Added Some Optimization Flags For ARM!
- Enabled Unaligned Capability For ARM!
- Hopefully Fixed Some Bootloop Issues!
- More Kernel Speed Enhancements!
- Removed Some Deprecated Logic!
- Reduced Some Dmesg Log Spam!
- Some More Code Cleanup!
- Tweaks For Battery!
- Even Better Battery!
- Plus So Much More!
★10.18.2013
- There Is Now Two Versions Of The Kernel! [STANDARD VERSION And ULTIMATE VERSION.]
- Added UKSM "Ultimate Kernel Samepage Merging" Feature!
- Optimized Kernel Samepage Merging (KSM)!
- Enabled /proc/last.kmsg Support!
★10.26.2013
- UKSM Enabled By Default! [Potential Increases In Performance.]
- Fixed The /proc/last.kmsg Not Showing Issue!
- Lowered MIN Allowed Voltage To 600mV!
- Decreased Some Voltages For Stability!
- Enabled Advanced Power Emulation!
- Added GPU O/C Up To 533MHz!
- Added GPU O/C Freq 487.5MHz!
- Smoother Gaming Performance!
- Enabled PROC_FS For Netfilter!
- Did Some Defconfig Changes!
- Did Some Minor O/C Tweaks!
- Added Faux Sound Control!
★11.4.2013
- Added Intelli-Thermal Control! [This Let's You Adjust The Throttling Temperature Thresholds For Each Core.]
- Some Cpufreq Tweaks That Should Help The Kernel Perform Better!
- Updated Some Default Settings For Intellidemand Frequencies!
- Added Dynamic Load Sampling Rate Logic On Intelli-Plug!
- Allowed 0ms Deadline Latency For Deadline Scheduler!
- Fixed Optimal_Freq Logic For Ondemand!
- Reduced Even More Dmesg Log Spam!
★12.19.2013
- Added New PM Kernel Driver For Android W/O Early_Suspend!
- Disabled Tima Uevent, Tima Log, And Timer Stats Configs!
- Implemented Some Miscellaneous Fixes!
- Added Support For H.264 LEVEL 5.2!
- Added Plenty Of Ondemand Tweaks!
- Disabled Some Debugging Configs!
- Enabled NTFS Filesystem Support!
- USB Fast Charge Is Now Fixed!
- Added Dynamic Sync Control!
- Added 24 Bit Audio Playback!
- Added Asynchronous Fsync!
- Added Panel Color Control!
★12.31.2013
- Did Some Defconfig Changes To Enable Some More USB/MMC/SD/SDIO/LED/RTC Drivers Support And Also MSM SoC Audio Drivers Support!
- Added CPU-Boost Driver! [It Boosts The Frequency Of A CPU For A Short Duration To Maintain Good User Experience.]
- Implemented Patches For DriveDroid App! [It Allows You To Boot Your PC From ISO/IMG Files Stored On Your Phone.]
- Now Comes With OndemandX And InteractiveX Governors With Screen Off Max Freq Support!
- Updated Faux Sound Control W/ Added Power Amp Registers Access Control!
- Updated OndemandX And InteractiveX With A Ton Load Of Code Tweaks!
- Implemented Some Code Fixes/Memory Leak Fixes!
- Increased Readahead Value To 1024kB As Default!
- Added A Bunch Of MSM: KGSL Modifications!
- Added GPU Simple/Conservative Governors!
- I Have Set GPU Simple Governor As Default!
- Updated Intelli-Plug And Intellidemand!
- Done Some USB Code Cleanup!
- Added Thermal Engine Tweaks!
- Added LED Extended Controls!
- A Lot Of Further Optimizations!
- Performance Improvements!
- Added MDNIE Lite Controls!
- Added Writeback Tweaks!
- Plus So Much More!
★1.30.2014
- Added Hyper, SmartassH3, Dancedance, Asswax, Smartmax, Lionheart, Smartassv2, Smartmax EPS, Badass, OndemandPlus, Abyssplugv2, PegasusQ, Nightmare, And WheatleyPlus CPU Governors.
- Added More Than 400+ Various Changes/Improvements For ARM, Cacheflush, Qseecom, Sched, Crypto, Tick, Nohz, Mmc, TTY, ASoC, Msm:Kgsl, Timekeeping, Cpuidle, Bam_dmux, Net:Wireless, And So Much More From Codeaurora.
- Modified Bus Vector For RNG Client On MSM8974. (Helps Alleviate Some Slowdowns In Boot Time.)
- Added Initial Overclocking Of Slimbus. (Gives The Best Audio Quality For The Hardware.)
- Added Some msm8974.dtsi Changes To Optimize The Performance Of The Kernel.
- Increased Adsp Heap Size For Hevc Hybrid Codec To Support 1080p Video.
- Added Throttling Adjustments To Better Deal With Added Overclocking Heat.
- Removed Faux Voltage Control For Imoseyon's Custom Voltage Control.
- Serious Power Saving Improvements For Sched_mc_power_savings.
- Removed Camera v1 Source Files. (Removed Since It's Obsolete.)
- Removed msm-dcvs Pwrscale Driver. (No Longer In Development.)
- Added Initial CPU Underclocking For MSM8974 Down To 96MHz.
- Removed MMC Perf Profiling. (Less CPU Work, More Battery.)
- Added I/O Schedulers BFQ, SIOPLUS, VR, FIFO, TripNDroid.
- Added Cryptos And Also NEON Optimized Crypto Routines.
- Removed Conservative GPU Governor Due To It Freezing.
- Added Some GCC Optimization Compiler Flags For Linaro.
- Added New Frandom Code With Frandom Device Support.
- Enabled Zswap, Frontswap, Vnswap, And Cleancache.
- Kernel Build Using Linaro GCC Toolchain Version 4.8.3.
- Many Defconfig Changes And Added Drivers Support.
- Implemented LoUIS API For Cache Maintenance Ops.
- Reverted GPU Overclocking (Hasn't Never Worked.)
- Added Power Enhancement For Wacom Hardware.
- Increased Default Entropy Settings To (512,2048).
- Switched Kernel Compression From XZ To LZO.
- Enabled All TCP Congestion Control Protocols.
- Increased Minimum Readahead Value To 64kb.
- Updated MDNIE Lite Control To Latest Code.
- Added Suspend Hooks To Synaptics_i2c_rmi.
- Added Optimized ARM RWSEM Algorithm.
- Added Optimized AES and SHA1 routines.
- Added CFQ, Deadline, SIOPLUS Tweaks.
- Updated BFQ I/O Scheduler To V6 (R2).
- Reduced Number Of CPU Frequencies.
- Updated Linux Kernel Version To 3.4.78.
- Added Support For NEON Kernel Mode.
- Updated Intellidemand To Version 5.0.
- L2 Cache Bus Bandwidth Overclock.
- Lowered GPU Voltage Constraints.
- Enabled Panic On Data Corruption.
- Removed Container Setup.
★2.26.2014
- Fixed The Issue Users Were Having In Faux Clock App That Would Always Set Their Current Max Frequency Back To 2.3GHz As Default Frequency While Overclocking. (Now The Frequency That You Choose Should Now Stick.)
- Removed Both MDNIE Lite Control And Panel Color Control. (In My Opinion Panel Color Control Was Never Needed And MDNIE Lite Control Seems To Break "Screen Mode" On Your Device Settings Menu In Device->Display.)
- Added Various Changes/Improvements For ARM, Lib, PM/Qos, Slab, Slob, Slub, MM, Ping, CameraV2, MSM:Camera, Iov-iter, Fuse, AIO, Mutex, Random, Epoll, Sched, Ext4, And More From Codeaurora.
- Fixed The Issue Users Were Having When Enabling USB Mass Storage Mode That Would Make The UMS/MTP Notification Flicker Constantly.
- Enabled AIO Optimization, Generic Strncpy, Generic Strnlen, Dcache Word Access, And Slub.
- Tuned Hyper, PegasusQ, And Nightmare Governors For Battery And Performance.
- Kernel Build Using Linaro GCC Toolchain Version 4.8-2014.01.
- Updated Linux Kernel Version To 3.4.82.
- Updated BFQ I/O Scheduler To V7 (R2).
- Added Intelliactive Governor.
★4.7.2014
- Added Mostly All Of My Previous Changes And Features To Kitkat Source. (The Only Things That Weren't Included Is Intelli-Thermal, Faux Sound, CPU Underclocking, and USB Fast Charge. Will Be Added In A Future Update.)
- Kernel Is Now Based From The T-Mobile SM-N900T Official UVUCNB4 KitKat Samsung Source Code.
- Added Some OndemandX Tweaks. (Ondemand Is Still Buggy, It's Rom Related, Not Kernel Related.)
- Removed CPU_FREQ_LIMIT Completely Without Sacrificing CPU_FREQ_LIMIT_USERSPACE.
- Removed Bootchecker, Auditd, And Tima_Dump_Log. (Security/Knox Related, Not Needed.)
- Minimum Frequency Will No Longer Keep Switching To 1190400.
- Kernel Build Using Linaro GCC Toolchain Version 4.8-2014.03.
- Added A Bunch Of Various CodeAurora Changes And Fixes.
- Added GPU Overclocking Up To 533MHz.
- Updated Linux Kernel Version To 3.4.86.
- Added Some More InteractiveX Tweaks.
- Removed Some Even More Log Spam.
- Set Default Governor To InteractiveX.
- Updated Intelli-Plug To Latest Code.
- Faster And Smoother Than EVER.
- Updated Intelliactive Governor.
★5.2.2014
- Disabled Multicast On Suspend. (This Allows The Device To Sleep Peacefully Without Being Woken Up By Local Lan Broadcast Traffic, Reducing Wakelocks.)
- Disabled All Ondemand Based Governors Due To Freezes And Random Reboots.
- Adjusted GFX Regulator Parameters + Further Reduced CPU Retention Voltage.
- Updated Interactive(X) Governor With Various CodeAurora Tweaks.
- Increased LED Flash Current For Better Camera Image Quality.
- Disabled Performance, Powersave, And Userspace Governors.
- Updated CPU Boost With Various CodeAurora Fixes/Changes.
- Allow USB Charging At 1A. (Charging Is Now Much Faster.)
- Added Initial CPU Underclocking Down To 268MHz.
- Fixed All Kernel Leaks And Done Some Cleanup.
- Bumped Up GPU Overclocking Up To 550MHz.
- Set InteractiveX Screen Off Max To 1267200.
- Updated Linux Kernel Version To 3.4.88.
- Updated BFQ I/O Scheduler To V7 (R3).
- Reduced Even More Kernel Log Spam.
- Set Default I/O Scheduler To Deadline.
- Removed LED Extended Controls.
- Added Back Faux Sound Control.
- Reduced Wi-Fi Wakelock Times.
- Improved The Kernel's Speed.
★6.11.2014
- Kernel Is Now Based From The Official N900TUVUDNE6 KitKat Samsung Source Code.
- Updated Intelli-plug To Version 2.6 With Touch Boost And Screen Off Max Control.
- Comes With New Faux Generic Voltage Control For DTS Based Kernels.
- Switched Kernel Compression From LZO To XZ To Reduce Kernel Size.
- Added Back Force Fast Charge And Updated It To Version 1.2.
- Kernel Build Using Linaro GCC Toolchain Version 4.9-2014.05.
- Enabled USB Tablet Devices And Xpad Support.
- Set Default Governor To ConservativeX.
- Updated Linux Kernel Version To 3.4.92.
- Updated BFQ I/O Scheduler To V7 (R4).
- Reverted GPU Back To Stock 450MHz.
- Updated Powersuspend To Version 1.5.
- Enabled CIFS Support With CIFS Fix.
- Added Back Intelli-Thermal Control.
- Added Various GCC 4.8.x Fixups.
- Now Comes With F2FS Support.
- Added Simple GPU Algorithm.
★6.17.2014
- Added 2-way Stereo Call Recording Patch For MSM8974. (Not Tested Try It Out And See.)
- Fixed The Problem With Logs Not Showing While Using A Logcat App.
- Updated Linux Kernel Version To 3.4.94.
- Reverted Some Useless Commits.
★6.17.2014
- Reverted/Removed 2-way Stereo Call Recording Patch For MSM8974. (Should Fix The Problem Of Calls Not Going Through And When People Call And Can't Hear You.)
★6.27.2014
- You Can Now Use Your Android Device As A USB Keyboard/Mouse. (Steps... Enable USB Debugging, Connect Your Device To PC/Laptop With USB Cable, Download This App From Play Store Click Here, Open App, Done.)
- Kernel Is Now Based From The Official N900TUVUDNF1 KitKat Samsung Source Code.
- Reverted Faux Voltage Control And Added Back Imoseyon's Custom Voltage Control.
- Disabled UKSM "Ultimate Kernel Samepage Merging" For Stock KSM.
- Fixed Kernel Thermal Sysfs Nodes Permissions.
- Allow WIFI Driver To Use PowerSuspend Code.
- Updated Linux Kernel Version To 3.4.95.
★10.1.2014
- There Are No More Seperate Versions Of The Kernel "STANDARD" Or "ULTIMATE". (The Kernel Will Have All The Features Including CPU Overclocking Which Was The Only Thing Seperating The Kernel Versions STANDARD/ULTIMATE.)
- Added Back 2-way Stereo Call Recording Patch For MSM8974. (Not Tested Try It Out And See.)
- Kernel Is Now Based From The Official N900TUVUDNF9 KitKat Samsung Source Code.
- Disabled Abyssplugv2 Governor. (Due To Freezes/Random Reboots)
- Kernel Build Using Linaro GCC Toolchain Version 4.9-2014.08.
- Added Slimbus Driver Enhancements MKII Tweaks.
- Added Various Commits For Drivers/Net/Wireless.
- Added TouchWake Implementation. (Version 1.5)
- Reverted Many Miscellaneous Useless Commits.
- Updated Intelliactive Governor To Latest Code.
- Updated Faux Sound Control To Version 3.6.
- Added Support For Additional Sleep Modes.
- Reduced Some More Kernel Logging Spam.
- Updated Linux Kernel Version To 3.4.104.
- Updated BFQ I/O Scheduler To V7 (R5).
- Set Default Governor To InteractiveX.
- Updated Intelli-Plug To Version 3.8.
- Merged F2FS Upstream Updates.
- Added Yankactive Governor.
CREDITS AND SPECIAL THANKS
Samsung
Google
T-Mobile
jamison904
franciscofranco
CyanogenMod
itsmikeramsay
Wootever
Xiaolu
faux123
civato
pelya
ptmr3
imoseyon
yank555-lu
KERNEL SOURCE: CLICK HERE
FOR SM-N900T T-MOBILE
COMPULSION KERNEL 16 DOWNLOAD LINK CLICK HERE
FOR SM-N9005 INTERNATIONAL
COMPULSION KERNEL 16 DOWNLOAD LINK CLICK HERE
OLDER KITKAT KERNEL BUILDS
FOR OLDER KITKAT COMPULSION KERNEL BUILDS
------------------------- CLICK HERE --------------------------
Stock Modified KitKat Kernel Is A Kernel With SELinux Set To Permissive, Removed Root Restrictions, ADB Insecure, Init.d Support, Enabled Ram Console (last.ksmg), Fix Crash When Selecting Simple Ondemand GPU Governor, And Ramdisk Changes. Only Simple Minor Changes For Stability And Lesser Problems Instead Of Adding A Bunch Of Commits Of Features And Codeaurora Changes. Get It From The Download Link Below!
STOCK MODIFIED N900TUVUDNF9 KITKAT KERNEL DOWNLOAD LINK -> CLICK HERE
If Your Having Problems And You Want To Revert Back To The Complete Stock Kernel, Then Go To The Download Link Below!
COMPLETE STOCK N900TUVUDNF9 KITKAT KERNEL DOWNLOAD LINK -> CLICK HERE
OLDER JELLYBEAN KERNEL BUILDS
FOR OLDER JELLYBEAN COMPULSION KERNEL BUILDS
------------------------- CLICK HERE --------------------------
Stock Modified Jellybean Kernel Is A Kernel With Only SELinux Set To Permissive And Some Minor Ramdisk Changes, Get It From The Download Link Below!
STOCK MODIFIED N900TUVUBMI7 JELLYBEAN KERNEL DOWNLOAD LINK -> CLICK HERE
If Your Having Problems And You Want To Revert Back To The Complete Stock Kernel, Then Go To The Download Link Below!
COMPLETE STOCK N900TUVUBMI7 JELLYBEAN KERNEL DOWNLOAD LINK -> CLICK HERE
USER'S CUSTOM KERNEL SETTINGS SETUP
Note... I Highly Recommend That You Use TricksterMOD Kernel Settings From The Play Store!
My Preferred Custom Kernel Settings Setup
GENERAL:
TCP Congestion Control: Cubic
Read Ahead Buffer Size: 512
Scheduler: Deadline
Frequency Lock: ON
Min: 268800
Max: 1958400
Governor: ConservativeX
SPECIFIC:
Eco Mode: OFF
MP-Decision: ON
Intelli-Plug: OFF
Multicore Power Saving: 2
Dynamic FSYNC: ON
Temperature Throttle: OFF
GPU Max Frequency: 550
XDA USER: ZDeuce2
GENERAL:
TCP Congestion Control: Cubic
Read Ahead Buffer Size: 1024
Scheduler: Zen
Frequency Lock: ON
Min: 300000
Max: 2265600
Governor: Intelliactive
SPECIFIC:
Eco Mode: OFF
MP-Decision: OFF
Intelli-Plug: ON
Multicore Power Saving: 2
Dynamic FSYNC: ON
Temperature Throttle: OFF
GPU Max Frequency: N/A
XDA USER: WhiTeRhiNo
USER'S SETUP LINK -> CLICK HERE
GENERAL:
TCP Congestion Control: Cubic
Read Ahead Buffer Size: 1024
Scheduler: SIO
Frequency Lock: ON
Min: 268800
Max: 1574400
Governor: Asswax
SPECIFIC:
Eco Mode: OFF
MP-Decision: OFF
Intelli-Plug: ON
Multicore Power Saving: 2
Dynamic FSYNC: ON
Temperature Throttle: OFF
GPU Max Frequency: 450
MPU Voltages: Undervolt By -25mV
Hey Jovy, can I flash on a stock rom? Awesome work btw....
senT ftoM mY tWeaKeD ouT notE 3
slice2011 said:
Hey Jovy, can I flash on a stock rom? Awesome work btw....
senT ftoM mY tWeaKeD ouT notE 3
Click to expand...
Click to collapse
You can flash it on any rom. Also i want people to let me know if exfat works i have added the code for it and also the files so let me know if the exfat support works.
Sent from my SM-N900T using Tapatalk 4
jovy23 said:
You can flash it on any rom. Also i want people to let me know if exfat works i have added the code for it and also the files so let me know if the exfat support works.
Sent from my SM-N900T using Tapatalk 4
Click to expand...
Click to collapse
And let the kernels roll!
Am I able to use set cpu or anything to undervolt the CPU? Or tweak the kernel at all....I was I knew how to modify kernels! Then i could make everything ive ever wanted :silly:....but alas....I am medical personnel:angel:....I am PC literate, but not like you peeps!:good::highfive::highfive:
Dl the kernel on a stock rom n this pop up showed up..
Sent from my SM-N900T using Tapatalk now Free
Done rebooting but still showing the same msg..
Sent from my SM-N900T using Tapatalk now Free
ade_tobat said:
Dl the kernel on a stock rom n this pop up showed up..
Sent from my SM-N900T using Tapatalk now Free
Click to expand...
Click to collapse
Odexed or deodexed rom? Becasue on all of my deodexed roms knox has been removed give me more info on what rom your on and anything that would help.
Sent from my SM-N900T using Tapatalk 4
jovy23 said:
You must definitely be on a rom that is odexed. On all of my deodexed roms knox has been removed give me more info on what rom your on and anything that would help.
Sent from my SM-N900T using Tapatalk 4
Click to expand...
Click to collapse
I hvnt dl any rom since I got this phone only root the device n uninstall some of the apps that I dnt need n also play around with the wanam xposed n I dnt know if this will help u but im using twrp recovery 2.6.3.2 when I flashed the kernel
Sent from my SM-N900T using XDA Premium 4 mobile app
---------- Post added at 01:03 AM ---------- Previous post was at 01:02 AM ----------
Is there a way I could get the stock kernel??
Sent from my SM-N900T using XDA Premium 4 mobile app
ade_tobat said:
I hvnt dl any rom since I got this phone only root the device n uninstall some of the apps that I dnt need n also play around with the wanam xposed n I dnt know if this will help u but im using twrp recovery 2.6.3.2 when I flashed the kernel
Sent from my SM-N900T using XDA Premium 4 mobile app
---------- Post added at 01:03 AM ---------- Previous post was at 01:02 AM ----------
Is there a way I could get the stock kernel??
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
stock kernel is now in the second post.... :good:
Please please please fuse :/
---------- Post added at 02:44 AM ---------- Previous post was at 02:43 AM ----------
On my mute 2 I used cryptonite extensively. Now it's not working :/ I need my pr0n.
Anyone know how to mount encfs? I think they took out fuse from the kernel Damn i
---------- Post added at 02:46 AM ---------- Previous post was at 02:44 AM ----------
Waiting to flash on rooted odex stock
Dl the stock rom deodexed n running this kernel so far is smooth kinda love it hope the battery life improves too.. thx jovy
Sent from my SM-N900T using XDA Premium 4 mobile app
Thanks jovy! Dude if you can write a killer tutorial on this as well (about how you build the kernel and stuff) that would be awesome!
Sent from my SM-N900T using Tapatalk
This makes darthstalker run even faster, which I didn't actually think would be possible.
This phone absolutely blazes now. I'll see how it does with battery life
Sent from my SM-N900T using Tapatalk
Works on Darkstalker v2
Sent from my SM-N900T using Xparent Blue Tapatalk 2
Did you add fast charge ? To speed up charge
Sent from my SM-N900T using XDA Premium 4 mobile app
Kernel seems to be working fine! Haven't found anything broken yet.
Kernel is working great with my SD card. I am able to read my files & transfer them back & forth no problem. Very nice work sir. Thank you very much.
Is brite still enabled in this kernel
Code:
*
* Your warranty is now void.
*
* This kernel is build my ruddnr951 (Kim Kyeongwook) at Korea android Forum.
* If you wanna contact with me, e-mail to [email protected]
--------------------------------------------------------------------------------------------------
* Me and Jollaman999 are not responsible for bricked devices.
*
Kernel Info
Builder : jollaman999
Intro : Added some features from other kernel sources based on CM kernel. And added some I/O schedulers, Governers, Overclock and Battery optimization.
====Features====
- Dynamic Thermal Control: This function automatically adjust throttling settings when CPU clock changed.
- Stock: Optimus G TDMB support for Korea
- Use Android device as USB keyboard/mouse support (Required app included) (Please refer to the youtube links at the bottom.)
- Buzzing sound FIX!!
- Lollipop multirom support!!
- Power fixed based on Gproj!! (Battery standby time greatly improved!!)
- GHOST TOUCH FIXED!!
- Configurable DoubleTap2Wake's touch counts!!
- Random hot reboot fixed.
- f2fs: Latest Linux patches applied.
- random: Latest Linux patches applied.
- Stock's LED driver ported.
- Used a kernel value which is optimized to battery life and performance balance. So you can use without specific settings.
- Built with latest Linaro 4.9.3-2015.02
- Used a Linux 3.4.106 kernel
- Used a XZ kernel extraction to decrease kernel loading time.
- F2FS file system support.
- Kexec Hardboot multi-boot support.
- Knock On available
- Gamma control feature
- Fast Charge available
- Intelli-Plug hotplug applied for battery life
- Dynamic FSYNC used.
- Advance sound control available.
- Voltage Controls
- CPU Downclock & Overclock (Supported clock : 270~1728MHz)
- GPU Overclock (Supported clock : 533/450/400/320/200/128MHz)
- Default Minimum/Maximum CPU clock : 270MHz / 1134MHz for battery life
- 'Smartmax' CPU Governer used as default for battery life
- 'Simple' GPU governer used as a default
- Westwood TCP Congestion used as a default
- Available TCP Congestion : westwood, reno, bic, cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp. yeah, illinois
- Available CPU Governer : dancedance, lazy, wheatly, asswax, intellidemand, interactive, conservative, ondemand, smartmax, smartassV2, abyssplugv2, lionheart, lulzactive, uberdemand, slim, pegasusq, performance
- Available I/O Scheduler : row, cfq, fiops, sio, fifo, vr, zen
====Changelog (Gen2-v2.5_Update8)====
[Gen2-v2.5_Update8]
- Stock: sound: msm: Stock KK ported (Also fixed voice recording issue (Q Voice, Video recording, Headset mic etc...))
[Gen2-v2.5_Update7]
- Stock: Optimus G TDMB support for Korea
- Stock: gee_defconfig: Enable MOBICORE driver (Related with DRM)
- Stock: tdmb: fc8050: Disable mess debug messages
- Stock: tdmb: fc8050: Fix Korean typo in sources
[Gen2-v2.5_Update6]
- All: f2fs updated
- jolla-twrp: Update kernel
[Gen2-v2.5_Update5]
==AIO Updates==
- f2fs: Update vold binary (Fix can't boot when f2fs partion exist.)
[Gen2-v2.5_Update4]
-All: Revert LGE headphone detect issue with noise fix, Fix min/max cpu voltage range
- Stock_KK: Fix compatibility issue for Kitkat
- jolla-twrp Update kernel
[Gen2-v2.5_Update3]
- Stock_KK: Gen2-v2.5 ported succesfully to Stock_KK kernel!!
- gpu: Stock KK porting
- mdp/fb: Stock KK porting
- led: Stock KK porting
- sound: Stock KK porting
- vibrator: Stock KK porting
- backlight: Adjust for Stock KK
- Complied with latest Linaro toolchain (2015.02)
- Lollipop: Re-complied with latest Linaro toolchain (2015.02)
- jolla-twrp: kernel: Re-complied with latest Linaro toolchain (2015.02)
[Gen2-v2.5_Update2]
==AIO Updates==
- ota: Fix FC issue when data is wiped
- unpack-ramdisk.sh: Fix init.d not working issue in some of roms
[Gen2-v2.5_Update1]
==AIO Updates==
- Lollipop - f2fs: Allow use of either f2fs or ext4 for system, data and cache
- Lollipop - rc-L: Remove useless cpu online lines
- ota: Restore sysinit SELinux permission by ota service script
[Gen2-v2.5]
- f2fs: Update to latest f2fs linux-3.4 branch's sources
- random: Update to latest Linux 4.0-rc1 sources
- hw_random: Update to latest Linux 4.0-rc1 sources
- jolla-twrp: jolla-kernel_Gen2-v2.5 applied
- Updates applied to Stock_KK kernels
====Dynamic Thermal Control====
- This function automatically adjust throttling settings when CPU clock changed.
So when you want to change thermal settings directly, you should turn off this function.
You can turn off this function by patching 'Dynamic_thermal_Off' in my server folder. (Not recommended.)
====USB Keyboard/Mouse Working Video====
http://youtu.be/_PZmWDqw6bA
====Configurable Knock On Touch Counts====
0 : Off
1~9 : Wake by n+1 taps. (n = Your setting)
Example)
0 : Doubletap2wake will not working.
1 : Wake by double taps.
2 : Wake by triple taps.
9 : Wake by 10 taps.
Recognizing Time : 100ms * 'touch counts'
(So when you set to 9, you can wake your device by 10 taps in 1 second. )
Known Issues
- When 'Nightmare' governer is selected, cpu cloks are not showing properly.
- USB Keyboard/Mouse driver is not loaded with Stock Kernel
Changelogs
[Gen2-v2.4]
- sched: Various optimizations and updates applied from faux123's mako kk_mr2
- lowmemorykiller: Some of optimizations applied from faux123's mako kk_mr2
- zram: Some of optimizations applied for Android from faux123's mako kk_mr2
- gee_defconfig: Disable unneeded mpdecision
- jolla-twrp: jolla-kernel_Gen2-v2.4 applied
- Updates applied to Stock_KK kernels
- OTA Updater included
[Gen2-v2.3]
- 2015/18/Feb Added - lge_touch_core: Fix bug of hardware keys not working when dt2w is disabled
- intelli_plug: Turn off wcd9310 debug messages
- msm_thermal: Do not working when screen turned off
- msm_thermal: Make temperature check logic simpler (Improve battery life)
- ipv4: try to cache dst_entries which would cause a redirect (CM update)
- intelli_plug/wcd9310: Force intelli_plug working when playing music while screen off
- dt2w: Fix doubletap2wake not working sometimes
- smartmax: Handle sampling_rate_screen_off by early suspend
- dynamic_thermal_control: Remove hardcoded cpufreq table and get it from current table
- jolla-twrp: jolla-kernel_Gen2-v2.3 applied
- Stock_KK kernels updated
[Gen2-v2.2]
- f2fs: Re-work with f2fs sources for Linux 3.4.x (Now working perfectly with no errors!!)
(/data, /cache re-format recommended if you using f2fs already.)
- jolla-twrp: TWRP v2.8.4 version up, jolla-kernel_Gen2-v2.2 applied, Lollipop multirom support
- multirom: v30 version up, Lollipop compatible
[Gen2-v2.0]
- Change logs only applied for CM/AOSP kernels
- Removed CM/AOSP KK kernels.
- Linux 3.4.106
- Compiled with latest Linaro_4.9.3-2015.01-build
- smartmax: sampling_rate_screen_off: Do not call usecs_to_jiffies function twice.
- wlan: prima updated to v3.2.3.197
- zram Support
- arm-crypto: sha-1, aes, sha256, sha512, arc4 optimization for ARM neon
- KEYS: close race between key lookup and freeing
- Low-memory-killer: Logic optimization from Motorola
- int_sqrt: Improve 3x faster integer sqrt
- readahead: make context readahead more conservative
- sound: Enable 320kbps audio recording
- arm: Perf update from Cyanogen Mod kernel_msm
- acpuclock-8064: Remove not working high level clocks (1782~1890MHz)
- gpu: Remove not working 607.5MHz and re-added 450MHz
- clocks: Remove unsafe lower cpu freqs (81~162MHz)
- smartmax: Fix default values
- fs: Always set noatime no diratime on all partitions! I/O Boost!
- board-mako: add missing updates from CAF
- board-mako: Enable Krait Retention
- msm: mdm2: Decrease leakage before QSC power-up
- smartassV2: Fix default values
- gee_defconfig: Compile smartassV2 cpu governor
- mako-sound: Noise fix ported from Stock KK
- mako-regulator: Add missed pm8xxx-adc regulator while ported Gproj power
- sound: Revert Nuplayer fix
- sound: wcd9310: Increase default gain (Increase volume for call speaker/mic and headphone/speaker)
- board-mako: Increase DC voltage level for G (Stock KK)
- mako: Add missed some of related with tabla for G
- cpufreq: Remove uncomfortable governors (nightmare, interactiveX)
- wcd9xxx: Fix headphone detect issue in 3.3V low batt (Stock KK)
- intelli_plug: Set screen off max to 702MHz
- sound: Buzzing sound FIX!! (intelli_plug,wcd9310: Force set 2cpus working when playing music while screen off)
[Gen2-v1.2]
- LP/KK: smartmax: Added sampling_rate_screen_off parameter - Thanks to gu5t3r
(When screen on, smartmax will increase clock based on sampling_rate.
And when screen off, smartmax will increase clock slowly based on sampling_rate_screen_off.)
- LP: mm: Set VM_MAX_READAHEAD to 512
- LP: msm: vidc: Get the current performance level
- LP: Fix some of sources for compatibility with cm12 build. (Kernels's functions are not changed.)
- aroma-installer: Fix logic of LP kernel and KK kernel installation.
- aroma-installer: Fix logic of LP kernel modules installation.
- aroma-installer: Fix logic of finding init.d support - Thanks to gu5t3r.
This patch only applied for AOSP based Kikat & Lollipop kernel.
====Changelog (Gen2-v1.1)====
- dynamic_thermal_control: Prevent dynamic_thermal call when device is hot and go to ideal state
(When device is hot and go to ideal state 'dynamic_thermal' called and change the msm_thermal settings.
So the original max frequency get lower clock step by step when device is hot.
This patch fix this bug.)
This patch only applied for AOSP based Kikat & Lollipop kernel.
====Changelog (Gen2-v1.0)====
- No more update for Kitkat and Stock.
- Restart with Clean Code!!
(Rebuild with Google mako source. Applied latest Linux patches with some of fixes for joll-kernel directly. So all of sources and kernel performance are stable.)
- Applied patches from Linux 3.4.1 to 3.4.105 one by one. (So sources and performance are stable.)
- Dynamic Thermal Control: Automatically adjust throttling settings when CPU clock changed. (Own making!!)
(Solve the existing problem coming back to 1134Mhz despite you change the CPU clock!!)
- Greatly improved battery life due to the source stabilization. (Light user can be used up to a day or more to use.)
- gpu: Fixed to use minimum gpu frequency when sleep. (Improved battery life) (Own making!!)
- Added jolla-kernel logo
- random: Applied all of latest Linux patches
- f2fs: Applied all of latest Linux patches
- Faux Sound: Applied faux123's latest sources
- Faux Gamma Control: Applied faux123's latest sources
- Intelli-plug: Applied faux123's latest sources
- GPU simple governor: Applied faux123's latest sources
- MTP: Applied Google latest sources
- TCP Congestion: Added cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp. yeah, illinois.
- io-scheduler: Added fifo, vr, zen.
- cpufreq: smartmax: Fix some of default values of smartmax governor. (Improved battery life)
- LZ4 compression format support.
- And applied more patches.
[v17_Final - Only for AOSP based Kitkat kernel]
- Dynamic Thermal Control: Automatically adjust throttling settings when CPU clock changed. (Own making!!)
(Solve the existing problem coming back to 1134Mhz despite you change the CPU clock!!)
- gpu: Fixed to use minimum gpu frequency when sleep. (Improved battery life) (Own making!!)
- Added jolla-kernel logo
- io-scheduler: Added fifo, vr, zen.
- cpufreq: smartmax: Fix some of default values of smartmax governor. (Improved battery life)
- MTP: Applied Google latest sources
- futex optimization
- Applied some of cpufreq patches
[v16]
- Use Android device as USB keyboard/mouse support (Required app included)
- L-kernel: Applied latest Cyanogenmod patches with 'seccomp'
- f2fs: Latest linux kernel tree patches applied
(Until Dec 9, 2014 f2fs: avoid to ra unneeded blocks in recover flow)
- f2fs: New 'inline_dentry' mount option applied
- L-kernel: makocam kernel added
- Support Stock camera diriver selection mode for L-kernel
- Support mod/nonmod kernel selection for L-kernel
- Recovery-twrp: Update kernel to jolla-kernel_v16
- Recovery-philz: Update kernel to jolla-kernel_v16
[v15]
- Only provided with my cm-12.0 UNOFFICIAL roms.
- Linux 3.4.105 applied.
- Latest mako's lollipop kernel patches applied.
- Makefile Optimization
v0xE
- L-kernel related fixes.
- Power: Applied gproj based power sources. (Battery standby time greatly improved!!)
- doubletap2wake: Fixed 3 taps issue when phone is suspended!!
- doubletap2wake: You can wake your device by 10 taps in a second!!: eek: (Configurable tap counts!!)
0 : Off
1~9 : Wake by n+1 taps. (n = Your setting)
Example)
0 : Doubletap2wake will not working.
1 : Wake by double taps.
2 : Wake by triple taps.
9 : Wake by 10 taps.
Recognizing Time : 100ms * 'touch counts'
(So when you set to 9, you can wake your device by 10 taps in 1 second. )
- doubletap2wake: Adjusted recognizing time.
- io-sched: Remove bfq io-scheduler that eat more batery. Back to fiops as default io-scheduler.
- Remove TDMB driver that not compatible with jolla-kernel.
v0xD
- f2fs: Applied latest updates until Linux 3.17.4
- random: Applied latest updates until Linux 3.17.4
- CM, L : Latest kgsl driver updated based on Lollipop kernel
- CM, L : Wifi updated based on Lollipop kernel
- L : cm-12.0 Ready (Know issue: Random screen flicking)
- GEEB camera fixed
- Stock: GEEB sdcard ramdisk lines added
- block: bfq io-scheduler added and set to default
- cpufreq: dancedance, smartassV2 new governors added
- leds: re-ported based on Stock KK only for duty cycles
- codel net-scheduler applied
- tcp: Some of optimized and TCP Small Queues applied
- ext4 optimized based on new random driver and FIDTRIM support
- zlib: clean up some dead code
- sound: Some of fixed with pop noise fix
- TDMB driver added (only for GEE and not tested)
- Some of mako to GEE related fixes based on Stock KK
- And more..
v12
- GHOST TOUCH FIXED!!
- Stock Wifi driver ported (Version 3.2.3.13 -> 3.2.7.27) (Speed up)
- Stock LED driver ported (LED duration fixed)
- Android L Kernel support
v11.1
- GUI AROMA INSTALLER Applied and multirom supported. (AIO)
- Built with Linaro 2014.09 gcc 4.9.2 latest toolchain.
- CM : Installation method changed to zlmage installation from boot.img installation. (increase compatibility.)
- CM : Built with latest CM source.
- CM : OTG function added. (experimental, now for test.)
- SPARSEMEM kernel option modified.
- Coretex-A15 memcopy optimization.
- memutils: memcpy, memmove, copy_page optimization.
- lge_touch_core: i2c error fixed when you upgrade your firmware.
- ext4: WB_SYNC_ALL pass called from sync(2) Speed up.
- Latest CM kernel patch applied.
v11
- Stock : Kerenel logo driver modified and jolla-kernel logo added.
- Linux 3.4.104 kernel applied.
- Modified to show jolla-kernel version. (On settings - About phone)
- Faux Sound updated to v3.6
- Stock : OTG Function added (USB can be recognized but not works.)
- GEEB : SDCard supported.
- WQ_POWER_EFFICIENT_DEFAULT power save patch applied.
- Kernel MOD NEON supported.
- msdos, ntfs filesystem is compatible.
- Stock : Backlight level kernel log deactivated.
v10_Stock
- Ported Stock Features : GPU, Video, Wifi, LED, Vibrator, IOMMU, Stock Camera
- Random hotreboot optimized.
- Only ext4 filesystem supported currently.
- Another Changelogs are same with CM/AOSP based jolla-kernel.
v10
- Stock Camera ported.
- Random Hotreboot optimization (When we reboot phone first when flash the rom and kernel or when using, there was random hot reboot. So we found the error at the binder which is the linking system between Android and Kernel. So we compare with Gproj kernel source and fixed it. Now you can use ART runtime as well.)
- Minimum clock increased. (81MHz -> 270MHz
- Throttling temperature limit decreased and fixed bug you can't set again to 1134MHz. (We think the last version's temperature limit is to high, so decreased and When you process Throttling, it has locked into 1134MHz. So we fixed.)
- 384MHZ L2 Cache voltage optimized.
- Android Logging (logcat) optimization and deactivated. (Don't use it commonly.)
- F2FS : Linux 3.16.2 version update proceeded.
- Few kernel settings have errors. Fixed.
- Extra minor patch proceeded.
- OMNI Kernel supported. (OMNI ROM)
v9_Refresh
- Kernel stablize : Applied Linux 3.4.103 patch and fix the bugs and errors on the source.
- mod/normal kernel both supported.
- User can personalize throttling option (You can personalize temperature and clock per level at the TricksterMod application.)
(※ You can use temperature limit option at the TricksterMod application, 'Temperature control'.)
Checked Compatible ROMs
Mod : CM12 (GEEHRC Unofficial), CM11 (GEE Unofficial), AxxionKat, Carbon
Normal (non-mod) : Dirty Unicorns, DayDream (This is Korean ROM ), Liquidsmooth
Stock : ARTMOD, Sling, Miui (you have to flash stock_miui)
G3 : GEE3
We always hearing your feedbacks. If there is a problem with specific ROMs, Error report into this thread.
Code:
---About Multi ROM---
jolla-TWRP is GEEHRC based recovery.
So when you going to flash Gproj based ROM or Stock based ROM, it can occur status 7 error.
In this case, extract the ROM file, and delete 'assert' sentence structure at
'META-INF/com/google/android/updater-script' and re-extract the ROM file. Then flash!
After you flash MultiROM zip, you can see 'MultiROM Fail' error message.
In this case, Go to 'Advanced - Multirom - ListROM - Your second rom - Flash zip'
and flash compatible kernel for your secondary ROM.
Download Link
http://buf.jollaman999.com/jolla-kernel_AIO-gee/
Mirror: https://www.mediafire.com/folder/9eemnevifta2z/jolla-kernel_AIO-gee - Thank you for gu5t3r -
If you wanna use F2FS partition, wipe /data, /cache as f2fs file system with TWRP recovery.
Flashing guide
- Follow the instructions of aroma-installer!
Don't be afraid when you flash F2FS kernel! F2FS has more longer first boot time than EXT4 Filesystem!!!
Battery Life : 10~12 hours in my phone
Jolla-kernel's all features only fully-working at TricksterMod application. There could be some features which are not working at other kernel controll apps.
We are trying to make better kernel everytime. Please understand us effort. :laugh:
jolla-kernel is released with a lots of test in other testphones.
But if you have a bug, Report plz.
Code:
[COLOR="DarkOrange"][B][I][U]CREDIT![/U][/I][/B][/COLOR]
[jolla-kernel source]
[url]https://github.com/jollaman999[/url]
[Referenced sources]
The Linux Kernel Archives : [url]https://www.kernel.org/[/url]
cm-11.0 : [url]https://github.com/CyanogenMod[/url]
Loller79 Solid_Kernel-Cyano : [url]https://github.com/Loller79/Solid_Kernel-Cyano[/url]
faust93 f93_kernel : [url]https://github.com/faust93/f93_kernel[/url]
Docker-J Sail_GPROJ : [url]https://github.com/Docker-J/Sail_GPROJ[/url]
faux123 mako : [url]https://github.com/faux123/mako[/url]
MikeEx kernel_msm : [url]https://github.com/MikeEx/kernel_msm[/url]
flar2 ElementalX-m7-4.0 : [url]https://github.com/flar2/ElementalX-m7-4.0[/url]
justin0406 AK-xGenesis : [url]https://github.com/justin0406/AK-xGenesis[/url]
Porting kexec hardboot : [url]https://github.com/Tasssadar/multirom/wiki/Porting-kexec-hardboot[/url]
544MHz GPU Overclock : [url]http://forum.xda-developers.com/showthread.php?t=2307086[/url]
jaeguek's F2FS filesystem : [url]https://kernel.googlesource.com/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools/[/url]
Donation link has been closed
Download link doesn't work
Nicee, thank you!
Sorry
I've just fixed. If you are downloading with your phone, try Chrome. Chrome supports FTP client
Downloading right now, will report about the stability and performance after trying it a while. A stock kernel with kexec hard boot would be really helpful. (I would build myself but sadly do not have time these days)
Oh... I think my friend will read every replies in this Thread and fix it daily and release more stable kernel.
Sent from my LG-E975 using XDA Free mobile app
ruddnr951 said:
Oh... I think my friend will read every replies in this Thread and fix it daily and release more stable kernel.
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Somehow this didn't work on my Carbon gee ROM. I mean, it works, but no matter what governor, voltages, etc in trickstermod, cpu always stays on 81mhz to around 150mhz, bringing the phone to a crawl. Maybe it's because I didn't wipe dalvik, I don't know.
Hmmm... I checked that this kernel is working at Axxionkat, Carbon, GEE Cyanogenmod Roms which are compaitable with MOD kernel.... how about wipe cache, dalvik cache or Flashing rom again...? I think that's not kernel problem
Sent from my LG-E975 using XDA Free mobile app
I try use this kernel on CyanogenMod 11 Nightly, and doesn't work. I installed zip and wipe cache and dalvik, but when I reboot the phone, have a blackscreen.
This kernel is for GEE ROMs. Official CM (E975) is for Gproj. Gproj ROMs are not compaitable with this kernel.
Sent from my LG-E975 using XDA Free mobile app
ruddnr951 said:
This kernel is for GEE ROMs. Official CM (E975) is for Gproj. Gproj ROMs are not compaitable with this kernel.
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Ups, fail! Thanks! I installed Carbon KK (based on Gee ROM) and kernel working... Thaaaaaaanks!
I'm really appriciated to you because you choose jolla-kernel :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is anybody else getting this when trying to visit the link? I read above it was fixed, but this is what I'm getting
iamterence said:
Is anybody else getting this when trying to visit the link? I read above it was fixed, but this is what I'm getting
Click to expand...
Click to collapse
use google chrome.
And I found a new XDA Relink error.
the download URL is ftp://ras.jollaman999.com:8221 but when we automatically redirected by XDA, It is relinking to ftp//ras.jollaman999.com:8221. There's no ':'
I fixed link http:// instead of ftp://
Sent from my LG-E975 using XDA Free mobile app
I like this kernel, except...bootanimation =.=". Flash in AxxionKAT and it replace my bootanimation by original CyanogenMOD bootanimation :laugh:
Is the kernel supposed to be 22mbs? I only asked because normally kernels are between 5 and 8mbs
iamterence said:
Is the kernel supposed to be 22mbs? I only asked because normally kernels are between 5 and 8mbs
Click to expand...
Click to collapse
because this kernel added bootanimation.zip, and it's 17MB
the title is a little confusing here. I mean E975 CM is gproj. Some may think that there's a kind of paradox in the tilte. gee and CM. We shouldn't try this kernel on E975 (geehrc) CM based ROMs like pacman, mokee, and...