Hi,
Am very new to rooting and installation of ROMs and Kernels. I accidently copied a jelly bean customized kernel in zip format to my SD card. Then using CWV i rebooted my phone and chose the option as boot from a ROM and i chose the customized ROM to boot from. Some progress like Unzipping was shown and suddenly a message popped up saying unable to install. I went for rebooting the phone and now its stuck at SONY logo and nothing else.Pressing back button also doesn't seem to help. I went to my PC tried the flash tool and there are two ftf files i had downloaded earlier pertaining to arc s 587 and another one one 562. I excluded the kernal and tried to flash my phone. The flash showed progress but then again the thing is back to square one. Can anyone help me??? Please!!:crying:
You did not copy a kernel to your SD card... No one flashes a kernel in cwm. You say you're stuck at Sony logo, more likely you forgot to flash boot.IMG in the ROM zip using flashtool or fastboot
Sent from my Xperia Arc S using xda premium
Include kernel, reflash the ftf
All you need to exclude is ta and simlock
Post by NASA Computer from the 1960s
Related
OK, I Know I did a very stupid thing but I flashed the Nordik Version of the Official ICS Rom for Arc S on My Arc.
Now The problem is when it was flashing, the flash stopped at a certain point. Here is the message
14/002/2012 20:02:24 - INFO - Flashing userdata.sin
14/002/2012 20:02:24 - ERROR - Error flashing. Aborted
14/002/2012 20:02:24 - INFO - Now unplug the device and power it on
Click to expand...
Click to collapse
But then After I Rebooted, It showed the sony logo for a second and then some logo of the mobile with a caution symbol (Yellow Exclamatory Mark). And thats it, after a couple of seconds, it switched off.
I repeated the process and the same thing.
Scared Then I Flashed a Doom Kernel and did a factory reset. While the factory reset, it said that it could not open \data :|
i tried formating data many times but it could not mount it saying different file system.
So I flashed a matching Custom ROM and It does not work, Nether is any app installing nor any file getting saved
Please Help!
And Anyway to solve the /userdata filesystem problem?
If flashtool stopped then try re-downloading the file in case it was corrupt, and try to re-flash. If that's not successful download a stock 2.3.4. ftf and flash that.
FTF Wasnt corrupt :\
Now I Have tried flashing the 2.3.4 Android aswell BB 48
A Very old one which I downloaded around december time to root my Arc.
That doesnt even go past the SE Logo
The Custom ROM atleast booted.
My Guess is that the userdata partition has a different filesystem than the one it can read :\
Think it's to do with flashtool being unable to handle ICS data parameters. Binary has posted some type of workaround till he updates it.
Ok, Will check them out.
Thanks!
In his post?
think so, it's mentioned in the thread.
Nope
It stops while flashing the system.sin file
Anyway to solve the /userdata filesystem problem?
Not yet, apparently. I use cm9 so don't really know, though I think there's a cwm flashable ics stock.
sinksterĀ©
No Use of that
Try connecting in fastboot, and use the erase or format commands, e.g. 'fastboot erase boot' or erase system, in case it's a system partition issue
Then try a kernel and rom.
sinksterĀ©
OK, Apparently the problem was that I was using an old version of the flashtool (0.5.8)
I downloaded the latest 0.6.9.1 and followed the 3 step flasshing process
Enjoying ICS on my LT15i
SS4Serebii said:
OK, Apparently the problem was that I was using an old version of the flashtool (0.5.8)
I downloaded the latest 0.6.9.1 and followed the 3 step flasshing process
Enjoying ICS on my LT15i
Click to expand...
Click to collapse
Hi ,
I have ARC S with unlocked boot loader.
I can install any kernel on the phone via fast boot or by using the flashtool latest version.Right now I have installe dthe lupus kernel V16 and I can boot to the CWM and I hae installed the latest version of Ultimate Xperia HD by jader , I can install and after installation if i reboot the phone is stuck at booting screen only. I have tried various kernels and various roms all are giving the same issue.
I can install the ROM but cannot boot it gets stuck at booting screen. I have formatted the partition's via fastboot and by using the CWM still the issue persists.Please help.
Flash the stock firmware ftf file, then try again, or flash a different kernel.
Sent from my Xperia X10 using xda premium
I have tried the same.and it stops and doesn't flash the Rom loading Kernel is very easy, can install Rom too but after this
When I boot it just sits at boot screen
Sent from my iris405 using Tapatalk 2
santsplen said:
I have tried the same.and it stops and doesn't flash the Rom loading Kernel is very easy, can install Rom too but after this
When I boot it just sits at boot screen
Sent from my iris405 using Tapatalk 2
Click to expand...
Click to collapse
Hi guys , Please help me as I have tried multiple kernels and roma all of them exhibit same issue,
Booting to CWM using the CWM inbuilt into the kernel takes a long time as well as once a rom is installed via CWM it completes installation and then comes to the boot screen and it sits at the boooting screena and does not get past it.
How are we gonna help if you don't state ROM and kernel and what exactly you did.
Sent from my Xperia X10 using xda premium
I have installed lupus v 16 kernel , with xperia ultimate hd rom and xperia blue rom both are having same issue.I can boot to cwm and install the rom but after you give reboot after the rom installation it just sits at the boot animation screen .
One thing I noticed is that booting to cwm takes almost a minute after turning on the phone , is this normal ?.
Sent from my iris405 using Tapatalk 2
Did you wipe everything before instaling, and have you tried reflashing th kernel
Sent from my X10i using xda premium
I have wiped system and data ,cache,dalvik cache and have even formatted the partitions from fastboot using fastboot commands ,have even tried rush kernel and u am facing same issue .Please help.
Sent from my iris405 using Tapatalk 2
Hi, i recently upgraded my xperia arc lt15i to the new ics software, all went well and everything working fine so i decided to root the phone which i managed to do with no problems. Being the tinkerer that i am i decided to move some files from my phone memory to sd card. Bad idea! My phone locked up and is now stuck in boot loop. I tried to flash the ics firmware but cannot do it because i need to turn on usb debugging which obviously i can't do. Is there anyway i can resolve this? The annoying thing is that i can see the files i moved on my sd card when plugged into my laptop if only i could transfer them back to phone memory all would be good. Any help is much appreciated.
Thanks Phil
Use aroma file manager from the android dev forums. It'll let you move files in recovery.
sinksterĀ©
Thanks but i can't seem to find the aroma downlaod anywhere and how do i start my phone into recovery?
Cheers
Philhnt said:
Thanks but i can't seem to find the aroma downlaod anywhere and how do i start my phone into recovery?
Cheers
Click to expand...
Click to collapse
Aroma File manager can be found in the Android themes and apps section (not in Arc themes and apps) i think so..
To boot into recovery press the volume down button while Sony Ericsson logo (name) is shown
Sent from my LT15i using XDA
Ok, so i've found the aroma file and copied it to sd card. Now I can't seem to get my phone into recovery mode. Also how will i know my phone is in recovery???
You'll need a kernel that has cwm to get into recovery...
So flash a new kernel on and then press volume down on boot screen to get into recovery. Though this means you'll have to unlock your boot loader
I tried flashing new software to my phone but it wouldn't have it because usb debugging can't be turned on, will i have the same problem trying to flash a kernal?
Cheers
How do i flash a kernal with cwm to my phone, do i need to have fastboot on my computer? I fear i am getting out of my depth! i need an idiots guide!!
Flashing a kernel doesn't deal with usb debugging and all.. First of all, tell me whether your bootloader is unlocked or not! Then I'll explain in steps!
Sent from my LT15i using XDA
Neither u need usb debugging to flash a new firmware or to upgrade the current rom..
for flashing purposes only fastboot or flashmode are required..
download the ics firmware ftf file and flash it via flashtool..
At Gire.prasad, I haven't unlocked the boot loader so i asume it is locked.
At now.i.feel. I tried flashing ics firmware again via flash tool but it wouldn't do it, it came up with an error saying it can't connect to my phone.
Thanks
Yes Yes Yes, my phone is back in action. I just flash ics firmware using flashtool again and it worked fine. i tried this the other day and it didn't work so something i downloaded from all of the posts must of helped.
Thankyou thankyou thankyou
It has been a learning curve and i have learnt my lesson. Not to dive in too deep too fast!!!
Thanks to you all again for your in put.
Phil
i unloceked the bootloader
but didnt take a recovery of my original firmware..!
then flashed the cm9 nightly Rom's boot.img file using flashtool fastboot mode
select kernel to flash
then my mobile went to reboot
after that it gets stuck on the xperia screen
i am able to run recovery..but not able to even mount sd card
also my pc companion n sus dont recognise the device..
ajinkya007 said:
i unloceked the bootloader
but didnt take a recovery of my original firmware..!
then flashed the cm9 nightly Rom's boot.img file using flashtool fastboot mode
select kernel to flash
then my mobile went to reboot
after that it gets stuck on the xperia screen
i am able to run recovery..but not able to even mount sd card
also my pc companion n sus dont recognise the device..
Click to expand...
Click to collapse
Cm9 does not need flashing boot.img separately any longer, have you format system yet?
Sent from my LT26i using Tapatalk 2
It's because he's now got cm9 boot and sony firmware. Just flash the cm9 zip in recovery
Sent from my Jellybean Xperia S
installing the zip gives me an error
installation aborted
Hi All,
First of all, Thanks to XDA and FreeXperia project. You guys are doing great.
Problem Description:
Initially my phone had a Genuine ICS 4.04 from Sony Xperia [build 6.1.A.2.55]. I heard about CM10 and Jelly Bean 4.1.2 for Xperia S and I wanted to try it out.
So, at first, for unlocking the bootloader, I followed a few procedures suggested in XDA forums about Xperia S and Youtube videos on how to root it and so, I was able to unlock it successfully.
Next while flashing(This is where I made a mistake) , I downloaded FXP202-cm-10-20130110-UNOFFICIAL-anzu.zip from FreeXperia project site.
I pushed the FXP202-cm-10-20130110-UNOFFICIAL-anzu.zip to sdcard.
I flashed boot.img, but the flash didnt succeed.
Later I figured out that I had to download FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip. The LT26i was a.k.a "nozomi".
I flashed boot.img now again which is from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip, then I could see the FreeXpria Logo and purple light on top. I pressed vol up to enter recovery mode.
But, now the zip image in sdcard is FXP202-cm-10-20130110-UNOFFICIAL-anzu.zip. So, I cannot flash that.
Is there anyway for me to copy the FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip file in my PC to a location in sdcard of phone so that I can point to it during the recovery mode or during fastboot mode, to take it and flash it ??
Is there anyway for me to completely redo the whole set of procedures, putting my phone to a sane state, fully working state with old 4.04 running on it ??
Later, adding to the list of risks, I tried the below command to flash all the contents in the FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip file after all the above procedures.
" fastboot flash system FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip "
I see that it succeeds in flashing too, but didnt boot up.
Help me to proceed now.
Regards,
Gani :|
Gani2012 said:
Hi All,
First of all, Thanks to XDA and FreeXperia project. You guys are doing great.
Problem Description:
Initially my phone had a Genuine ICS 4.04 from Sony Xperia [build 6.1.A.2.55]. I heard about CM10 and Jelly Bean 4.1.2 for Xperia S and I wanted to try it out.
So, at first, for unlocking the bootloader, I followed a few procedures suggested in XDA forums about Xperia S and Youtube videos on how to root it and so, I was able to unlock it successfully.
Next while flashing(This is where I made a mistake) , I downloaded FXP202-cm-10-20130110-UNOFFICIAL-anzu.zip from FreeXperia project site.
I pushed the FXP202-cm-10-20130110-UNOFFICIAL-anzu.zip to sdcard.
I flashed boot.img, but the flash didnt succeed.
Later I figured out that I had to download FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip. The LT26i was a.k.a "nozomi".
I flashed boot.img now again which is from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip, then I could see the FreeXpria Logo and purple light on top. I pressed vol up to enter recovery mode.
But, now the zip image in sdcard is FXP202-cm-10-20130110-UNOFFICIAL-anzu.zip. So, I cannot flash that.
Is there anyway for me to copy the FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip file in my PC to a location in sdcard of phone so that I can point to it during the recovery mode or during fastboot mode, to take it and flash it ??
Is there anyway for me to completely redo the whole set of procedures, putting my phone to a sane state, fully working state with old 4.04 running on it ??
Later, adding to the list of risks, I tried the below command to flash all the contents in the FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip file after all the above procedures.
" fastboot flash system FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip "
I see that it succeeds in flashing too, but didnt boot up.
Help me to proceed now.
Regards,
Gani :|
Click to expand...
Click to collapse
Yeah u can flash stock ftf through flashtool in flashmode.Youll br to your stock rom & kernel.Also may be u can use mount usb storage in recovery(im not confirmed itll work) to put the rom in sd card
Press Thanks
Sent from my Xperia S using xda premium
Hey guys! Today I rooted my device, installed CWM and installed a ROM onto my Arc device today. It all went fine but when I rebooted after the install the device seems to be stuck at the "Sony" logo. I cant seem to boot it into CWM (tried it couple of times). I'm new to this so does anyone know what the problem might be?
Thanks in advance
Did you unlock the bootloader? Flashed the right kernel? Explain a bit what did you flash and how.
troubled_android said:
Did you unlock the bootloader? Flashed the right kernel? Explain a bit what did you flash and how.
Click to expand...
Click to collapse
I'm kinda new to this and I just did what the guide told me to do , which is the following:
For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
Give the phone a good full charge, and enjoy your brand new phone!
Okay I suppose you flashed this rom and installed it with aroma installer. And you can't boot into recovery mode when logo appears (by pressing vol down button?)
Argh I had the same problem when using different rom with aroma installer and I couldn't boot in recovery mode. The main problem was not getting into cwm so I had to flash the stock rom (ftf file) back on arc using flashtool and I rooted the phone and unlocked BL again. Then I restored the previous backed up rom.
Is there any particular reason to have locked BL? You can do it with flashtool.
I don't know what the problem would be since I don't have enough experience with aroma installers, I just know the basics of flashing, installing and I can solve problems on my own arc when I f*** up something but I'm a bit confused here so you better wait for someone who has more brains than I do.
troubled_android said:
Okay I suppose you flashed this rom and installed it with aroma installer. And you can't boot into recovery mode when logo appears (by pressing vol down button?)
Argh I had the same problem when using different rom with aroma installer and I couldn't boot in recovery mode. The main problem was not getting into cwm so I had to flash the stock rom (ftf file) back on arc using flashtool and I rooted the phone and unlocked BL again. Then I restored the previous backed up rom.
Is there any particular reason to have locked BL? You can do it with flashtool.
I don't know what the problem would be since I don't have enough experience with aroma installers, I just know the basics of flashing, installing and I can solve problems on my own arc when I f*** up something but I'm a bit confused here so you better wait for someone who has more brains than I do.
Click to expand...
Click to collapse
I just want to put my standard rom on there atm, can you link me to something that tells me how to do that?
Ok, so here's thread with stock, custom roms, kernels etc. here find the stock rom and choose version (lt15i or lt18i depends on which phone you have and where you're from) and download the ftf file.
Then go to this link where you'll get direct instructions on how to flash. It's really not that complicated. Just open flashtool, choose flashmode and browse for the ftf file, then flash it.
Good luck.
If you wish us to help you, at least tell which ROM you installed.
For a locked bootloader, flash the original TFT through Flashtool.
Root.
Install CWM.
Reflash ROM.
If your bootloader is unlocked, just flash a kernel with CWM included.
Mount your SD Card.
Put the ROM on it.
Flash.
Hope I helped you !
Cheers.