[Q] [Urgent] Hard locked after messing with Odin - AT&T Samsung Galaxy Note II

I had an issue earlier, where I couldn't get into recovery, so I had to mess with Odin...
Now that I have my recovery back and is able to boot up, I am not able to:
Connect to service
Use any internel phone memory
Settings > About > Baseband version "Unknown"
I have tried stock, cleanrom, Jedi Rom, they all ended with the same result.
Also running on the correct modem.
Would flashing pit file save it from brick?
Device: i317M

Would any suggest me to try anything out before I send it to Samsung?

Sounds like you wiped your imei or /efs partition. Not sure of a solution atm

Look into NV item repair for either the Note 2 LTE or the North American SGS 3.

Related

[Q] Network lost during downgrade procedure. Any Help

T-Mobile Note 2:
How can I get data service back on the Note 2?
I cannot get 4G/LTE status on the Note 2 after the downgrade procedure.
I was on the latest OTA. I downgraded to 4.1.1 in order to be able to unlock the phone.
I flashed Factory Image T889UVALJ1 successfully. I noticed in the Flashing Instructions it states:
For Factory Image use Odin. – which I used
__-- Unzip the downloaded file and flash ".tar.md5" via Odin. Ignore "SS_DL.dll". Will LOOSE data and root. Back to Factory State.
____-- If you boot loop go back into recovery, do a factory reset, and reboot
I lost data service and I am having a hard time trying to get the network back again. I have tried flashing to the latest OTA, CM10 nightlies, and now currently on Jedi14. Everything works except Network. I put the sim card on a Galaxy S4 phone and the 4G/LTE service is there but no service on the Note 2.
I have searched and searched on how to get it back and nothing. Any help would be appreciated.
Anyone????
I have an extra Note 2. Rooted as well. Is there a file that I could use from the working Note 2 and place it in the non working Note 2?
For fun, I made a backup of the working Note 2 and placed it with the non working Note 2. Everything is there except network.
Do you have the correct APN setting?
Can you see your IMEI number?
Do you have the correct modem?
Sent from my SGH-T889 using xda premium

[Q] Baseband/Download Mode name incorrect

Hi I know this is my first post on here but i have been researching and havent been able to find anything on it. I sent in my gs3 to squaretrade and recieved a replacement one today. The model says GT-I747 on the back. So I started the phone, rooted it and installed cwm using the toolkit. I went to go install CM10 when it gave me a getprop error. I thought this was wierd so I installed a different 4.2.2 aokp rom and it worked fine. I started up the phone and realized i wasnt getting any 4g. only up to H+. I went and looked at the baseband version and it says T999UVDMD5 which i know is the tmobile version. the model number still said SGH-i747 but i figured that was just because it was an i747 rom
I thought this was strange and was like oh well ill just go back to stock and start again. I went into Download mode and noticed the product name says SGH-T999. It may have said that before and i didnt notice but i did this time, Any time I try to reflash anything with odin it gives me a
Complete(write) operation failed error. Whether im trying to reflash the baseband or back to a stock rom i get that error. On the phone it says SECURE CHECK FAIL : aboot
i also tried flashing the i747 modem in cwm from one of the threads on here which just made the baseband unknown in the settings with no reception and such. I tried multiple modems with no luck. the only way i was able to regain reception was by flashing another T999 modem through CWM
as a last attempt I installed a Touchwiz rom through cwm to see if it would sync through kies. It said my firmware version wasnt supported for update via kies. when i go to software upgrade and initialization it says 'SGH-I747' does not support initialising.
Im stuck. Please help

[Q] IMEI unknown / unknown baseband T889

So, I have my T-Mobile SGH-T889 Note II and a few days ago, I was trying to move to a different rom and in the process ended up losing the imei and baseband. I do not have a backup of my efs folder, and none of the common "tricks" to fix it are working. There are no Qualcomm USB settings when I try the *#7284# and flashing the phoneutil.apk file didn't fix that.
It was to the point where the phone wouldn't get wifi or cell signal but after flashing back to 4.1.1 image, Wifi is working and the phone is re-rooted.
So now I basically have a small tablet...
Is there any hope of getting the IMEI/baseband fixed so that my husband can use my note II? I've already upgraded to a note 3.
Attached are the images of the efs folder (imei folder is empty) and also of the About Device area in settings.
How did you "flash back to 4.1.1 image"?
Coug76 said:
How did you "flash back to 4.1.1 image"?
Click to expand...
Click to collapse
With Odin and the factory image from the development thread here.

Baseband / IMEI Lost

Hi
I am creating this post after searching for many hours and trying multiple things mentioned on xda and other sites. but nothing worked for me
I have T889V ( Note 2 from WindMobile) and by mistake I flashed At&T stock rom which resulted in loss of baseband and IMEI
Right now phone is working with only Wifi ( NO 3G and calls)
I have backup of this phone when I bought it. I have following backups
1. TWRP EFS backup
2. NVRAM Backup
3. QPST Backup.
4. Backup of m9kefs1, m9kefs2 and m9k2efs3
Tried following things
1. I have tried to ODIN stock Wind firmware but it did not bring back baseband
2. . Tried to flash modem from Tmobile 889 , but baseband still remains unknown.
3. Tried to odin Tmobile firmware but it always fails at radio/modem step.
4. Tried multiple pit files but all gets stuck at " Mapping pit file"
5. Tried to odin stock 4.12 firmware from Wind and manually copied m9kefs1, m9kefs2 and m9k2efs3 using dd , baseband still remains unknown.
6. Tried to restore my backup with QPST but it says says no phone connected , even though when I add port it sees COM3-USB/QC Diagnostic. Yes I changed mode to "RM*** + DM + MODEM".
Can someone please help me in getting this phone working again.

Any way to recover a Mis-flashed Tab ?

Got a Tab 3 7.0 from a coworker he tried to flash it
im a little knowledgeable with flashing Odin ect. i cant figure out what he did
its a SM-T217S Wi-Fi will not stay on for more than a Second BT same i used a active Ting Sim it says No sim card no data
i re flashed the Original Stock JB rom no luck
Any ideas ?
Sparky the clown said:
Got a Tab 3 7.0 from a coworker he tried to flash it
im a little knowledgeable with flashing Odin ect. i cant figure out what he did
its a SM-T217S Wi-Fi will not stay on for more than a Second BT same i used a active Ting Sim it says No sim card no data
i re flashed the Original Stock JB rom no luck
Any ideas ?
Click to expand...
Click to collapse
Have you performed a factory reset or full data wipe from recovery? (flashing an Odin package does not wipe data).
Wifi and bluetooth disconnecting can sometimes be resolved by deleting the wifi and bluetooth (or bluedroid) folders located in the /data/misc directory. A factory reset will also remove those directories and allow them to be re-generated after a reboot.
There is also KitKat firmware (4.4.2) available at sammobile.com that you could download and flash through Odin.

Categories

Resources