Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
Hi, my blueangel has been acting up, everytime i turn it on the start button and message buttons keep getting pressed constantly (being activated) however when i turn the backlight off, by pressing the power button for 5 secs, the problem is solved, but when i turn on the backlight it gives me the same problem..
Any ideas how i can solve this problem, since my blueangel is not in warranty.
anyone?
For me it sounds like a hardware problem, but can you share with us which rom do you use ?
my rom version is PDA2k_Arabic_14000_169_11200
I too think that it might be a hardware error, however, is there any way to fix it.. ???
Hi,
my Hox's screen doesn't turn on after I put it to sleep. I press the power button and only capacitive buttons turn on and after a few seconds they turn off too. And when I press the volume keys and it changes the volume.
Then I hold power button for long time and phone Turns off . when I turn it on it boots with screen still off.
After a few times turning the screen on/off ,it turns on and its fully functional, I can turn it off, wait a few seconds , and turn it on again.
but after waiting for a minute I have the same issue.
This issue happened when I flashed my first rom(ARHD) on it. I have tried re installing ARHD, and recovering stock rom, but the problem is still there.
Can somebody help me please ?
Hi all,
I have some trouble with my Z1 compact. Very often when screen is off and pressing powerbutton (to get to unlock screen) the screen goes on but in the same sec goes it off. The same thing can also happen if screen is on and I want to turn it off -> it goes off and again on and I'm back at unlock screen. This issue appears kind of randomly and I have no idea if this is a software bug or a hardware problem.
Using CM11 M12 stable. Any ideas? Thank you
Milltach said:
Hi all,
I have some trouble with my Z1 compact. Very often when screen is off and pressing powerbutton (to get to unlock screen) the screen goes on but in the same sec goes it off. The same thing can also happen if screen is on and I want to turn it off -> it goes off and again on and I'm back at unlock screen. This issue appears kind of randomly and I have no idea if this is a software bug or a hardware problem.
Using CM11 M12 stable. Any ideas? Thank you
Click to expand...
Click to collapse
I have the same phone and OS, and have seen the same issue, but until I saw your post I have dismissed it as something I was doing when pressing the power button. I believe it must be a software bug, since I did not have the problem when running the stock OS. Perhaps it is worth a bug report.
Milltach said:
Hi all,
I have some trouble with my Z1 compact. Very often when screen is off and pressing powerbutton (to get to unlock screen) the screen goes on but in the same sec goes it off. The same thing can also happen if screen is on and I want to turn it off -> it goes off and again on and I'm back at unlock screen. This issue appears kind of randomly and I have no idea if this is a software bug or a hardware problem.
Using CM11 M12 stable. Any ideas? Thank you
Click to expand...
Click to collapse
I use Xposed and GEM Xperia Xposed module, that has 'wake up with volume keys'
Not really a solution, more of a workaround
Hi all,
Problem: When the phone is turned on, locking the screen works beautifully. Once the display turns off, pressing the power button doesn't do anything... for about a minute. Then the display wakes up and everything is fine again. It doesn't sound like a hardware issue, as the power button works in recovery, and to lock the screen. The screen turns on instantly in recovery and when powering on the phone, so I don't think it's the screen's problem either.
Does anyone have any ideas to fix this problem? Thanks!