Related
So I I've had 2 different recoveries so far that have worked fine.. both came from Rogue though. One was from the 1.5 kernel (Hitman) which installed CWM Touch recovery, the other came with the normal recoveries based off CW 5.0.2.7. They were working fine until I installed Calkulin's Rom(2.8.1). Not sure if they're just incompatible or what, but when I go to recovery it shows the background image of the recovery but none of the options show up. It shows for about half a second and then it goes back to the original boot screen, then to the 2nd screen and turns on. So it basically skips right through the recovery and reboots. Do I need a new Rom or can I fix this? I really like the battery life and visuals of Calkulin's Rom and would love to be able to keep it.
EDIT: One more thing.. Since I installed the ROM, I've been getting market error 492. It doesn't allow me to install anything in the market..
I haven't tried a full wipe yet, so I guess I'll try that and then see how that works with the recovery and Rom..
I did the same thing to my phone this week, and I'm running Blazer, so i'm sure it has nothing to do with either ROM.
Not sure how I caused it but with so many folks running both without this error, I'm guessing that your issue (like mine was) was probably some how self induced.
I flashed back to stock and started over, and things have been working great. Might be worth a shot flashing back, or restore a backup and start fresh.
Haven't seen the market error before. I'm sure someone here has
Good Luck
If you got it off here, could you show me which stock you flashed..?
Everything you need is in the Epic 4G Touch Android Development section
Here is the post I used from Sfhub
http://forum.xda-developers.com/showthread.php?t=1433101
Watch the videos by Qbking77 They walk you thru everything step by step. (I hear his video intro rif every time I close my eyes now so you've been warned) Makes it super easy.
I would read everything you can and watch the videos before you get in too deep. I've had this phone since December, and just flashed my 1st ROM this week cause I've been reading up, and learning all I could before I jumped in the pool.
Well I've done all this with 2 phones before but I've never had this happen.. normally I just get the Rom and I'm good to go..
I think I must've gone wrong somewhere when I originally rooted through a stock rom.. It already seems to be more respondful.
premo1 said:
I think I must've gone wrong somewhere when I originally rooted through a stock rom.. It already seems to be more respondful.
Click to expand...
Click to collapse
Try booting while holding the volume up and power button.
If that does not work, flash recovery from rom manager, and that should get you into recovery to flash whatever kernel/recovery u want.
I've done all that.. None of it works.. I'm currently ODIN'ing Factory Stock Rom with root. Hopefully after that I can redo all of these and eventually end up with a working, corresponding Rom and kernel..
premo1 said:
I've done all that.. None of it works.. I'm currently ODIN'ing Factory Stock Rom with root. Hopefully after that I can redo all of these and eventually end up with a working, corresponding Rom and kernel..
Click to expand...
Click to collapse
Good Luck.
Recovery and market are now working Thank you Adanorm!
Glad your back up and running
I just flashed the newest version of the codename rom (JustLoveCodename-Android-(Alpha1)2.0.0-RC to my epic 4g touch. I also flashed the Google apps pack that comes with it. It seemed nice at first, but then I tried using the market and it just kept telling me there was a server error. I tried re-downloading it from third party sites but nothing was working. So I went to flash back to Calkulins rom. As I got into recovery mode, it seems the phone somehow changed itself to another recovery system (It might've been CWM) instead of the rogue one I had prior from the initial root process. I tried flashing anyway and the a picture of a dead android with his front opened up and a red exclamation popped up. I rebooted the phone to see what would happen. It brought me right back to Code name's rom. I tried it 3 more times yet the same thing happened every time. I also tried a battery pull. It did not work. I am thinking of doing one of two things: I am going to either go through the initial root stages again or I am going to try to delete the Codename rom from my SD card and try flashing another rom (preferably Calkulin). Please tell me if this is the right thing to do or if there is another method of fixing this problem. Thank you for taking time to read this. I really appreciate any help. FYI: My phone is still in working condition, but I am stuck using the Codename rom which I really do not want to use anymore. I just was able to get ES file manager working and i checked my external sd folder, but there is nothing in it. When i look at my storage from system settings, it says i still have the memory on it. So why is ES not displaying it? =( I re-installed rogue cwm and flashed calkulin's rom again and everything is fine. Heed my advice and be wary of the Codename Rom. Editor's, you can delete this thread if you wish. =)
Gzerner said:
I just flashed the newest version of the codename rom (JustLoveCodename-Android-(Alpha1)2.0.0-RC to my epic 4g touch. I also flashed the Google apps pack that comes with it. It seemed nice at first, but then I tried using the market and it just kept telling me there was a server error. I tried re-downloading it from third party sites but nothing was working. So I went to flash back to Calkulins rom. As I got into recovery mode, it seems the phone somehow changed itself to another recovery system (It might've been CWM) instead of the rogue one I had prior from the initial root process. I tried flashing anyway and the a picture of a dead android with his front opened up and a red exclamation popped up. I rebooted the phone to see what would happen. It brought me right back to Code name's rom. I tried it 3 more times yet the same thing happened every time. I also tried a battery pull. It did not work. I am thinking of doing one of two things: I am going to either go through the initial root stages again or I am going to try to delete the Codename rom from my SD card and try flashing another rom (preferably Calkulin). Please tell me if this is the right thing to do or if there is another method of fixing this problem. Thank you for taking time to read this. I really appreciate any help. FYI: My phone is still in working condition, but I am stuck using the Codename rom which I really do not want to use anymore. I just was able to get ES file manager working and i checked my external sd folder, but there is nothing in it. When i look at my storage from system settings, it says i still have the memory on it. So why is ES not displaying it? =( I re-installed rogue cwm and flashed calkulin's rom again and everything is fine. Heed my advice and be wary of the Codename Rom. Editor's, you can delete this thread if you wish. =)
Click to expand...
Click to collapse
K. The reason you aren't getting to the old version of CWM is because you flashed Codename. Codename is an AOSP ROM which has been known to cause bricks when flashing with Rogue. Because if the bricks the developers opted to but include CWM of any kind in the kernel. What you need to do is find a replacement ROM and download it. Once you've downloaded it you need to flash the EL26 stock CWM (you can find it in the OP of the link below) then use it to flash your new ROM.
http://forum.xda-developers.com/showthread.php?p=295021
Well you're at it is suggest reading the How Not To Brick Your Phone thread in general.
Good luck!
Codename rom is an AOSP rom so your external SD storage will be under /emmc and not /sdcard/externalsd. That's why it wasn't showing up. Same thing with CM9 and AOKP, not because it doesn't work. Also I wouldn't recommend flashing anything ICS related from rogue recovery, js.
And recoveries changed because with our phones, the recovery is packed into the kernel itself so when you flashed Codename, the recovery changed to the stock recovery included with the roms kernel. Hope that clears it up lol.
Sent from my SPH-D710 using Tapatalk
If you want a fresh install, the best way is to Odin the el29 kernal. From there, get into your recovery and wipe and flash away.
Sent from my SPH-D710 using XDA
I recently recieved my One V and finally decided on rooting/installing a custom rom. I came from an Optimus V and had no problems installing a custom rom in that.
However it seems that no matter what kernel/rom I use they eventually lock up within the first 5 minutes of booting and restart. I've tried practically everything and can't get them to work. I wanted to ideally run the CDMA Pacman Rom w/ the Supersick kernel. Any help would be greatly appreciated so I have can have this working before work tomorrow.
Did you do a full wipe ???
ryansinibaldi said:
I recently recieved my One V and finally decided on rooting/installing a custom rom. I came from an Optimus V and had no problems installing a custom rom in that.
However it seems that no matter what kernel/rom I use they eventually lock up within the first 5 minutes of booting and restart. I've tried practically everything and can't get them to work. I wanted to ideally run the CDMA Pacman Rom w/ the Supersick kernel. Any help would be greatly appreciated so I have can have this working before work tomorrow.
Click to expand...
Click to collapse
"It ain't workin" isn't enough information for anyone to troubleshoot from.
Be more specific on what you did, which instructions you followed, what ROM and what kernel, what sort of computer you're running, where you're downloading from, and the steps you are taking. If none of the ROMs are working, the problem is probably not the ROM, if you know what I mean...
donhashem.dh said:
Did you do a full wipe ???
Click to expand...
Click to collapse
Full wipe as in? (sorry, still a bit new). I did do a factory reset in CWM before installing whichever ROM I was trying at the time. I wiped all caches too.
slack04 said:
"It ain't workin" isn't enough information for anyone to troubleshoot from.
Be more specific on what you did, which instructions you followed, what ROM and what kernel, what sort of computer you're running, where you're downloading from, and the steps you are taking. If none of the ROMs are working, the problem is probably not the ROM, if you know what I mean...
Click to expand...
Click to collapse
I used the HTC One V AIO Toolkit to unlock the bootloader, get root, install CWM 6.0, create a backup and then install a kernel (I used the Super Sick JB one). From there I used CWM to gain access to my SD card and transferred over the CDMA Pacman ROM (after wiping everything clean) and then installed the ROM. It booted up successfully however as stated in a minute or so it would freeze up and restart itself. Even if I don't do anything after a reboot it'll still reboot itself anyways.
I did a bit of research and I'm thinking it could be due to the OTA Radio update from 2-3 weeks ago? I'm at my bootloader now and it says I have radio version 1.00.00.0928.
Any further help to resolve this issue would be greatly appreciated. It's worth noting that I've tried many different Kernels (repeating all the steps above with full wipes every time) and different ROMs that were supported by the kernels. I've even tried to restore my phone back to stock and it just starts skipping at the VM Boot screen.
Oh, and I'm running Windows 7.
You mean the Rom booted normally right ?? If yes then the problem is with the Rom
donhashem.dh said:
You mean the Rom booted normally right ?? If yes then the problem is with the Rom
Click to expand...
Click to collapse
Pardon my ignorance but that just doesn't make sense. I've tried several different ROMs with the correct kernel's (Pacman, CM9/10, AOKP JB) and it's all the same scenario. They all boot (or occasionally don't boot and restart themselves at the boot animation) and then reboot themselves once they're pass the lock screen.
Like I said even currently if I restore my stock rom file it just loops at the VM Boot animation (which doesn't play fluidly).
Figured out the issue . It was radio version 1.00.00.0928 messing up my kernel.
Hi
Guys i need your help. Pleas can someone tell me for now what mods is much better for I927R (Also withe very stability and with much less bugs) ?!
I found Liquid Smooth but it have some problem so i need your guide about other mods.
Thank you
ICS Roms are the best and most stable... Stock ICS from AT&T UCLJ3 or any roms based off of it ... Dman's daily driver, Ice Pop Rom by RawRaw, LiteRom by TheGreaterGood...
Unfortunately none of those are being maintained but I had been running Dman's for the last couple months, great battery life when paired w/ JuiceDefender (20+hours of heavy use when I'm not sleeping).
Now the newest CM10.1 by Spyke seems pretty solid ... Just a couple of issues.
ICS is the only one you'll get bug free, though. Stock is hard to compete with when we're pairing up roms without a true Devdeloper.
On this subject, I've just reverted back to using IcePop ROM after (unhappily) downgrading from Spyke's latest 10.1 ROM - just mainly because of the Bluetooth headset issue, which I really need working for work purposes.
I'm just wondering if there are any ICS builds that have GPS working correctly? I tried flashing the Rogers modem (since my phone was originally a Rogers import, flashed to AT&T ICS, then played with ICS from there) and first time I ran GPS status it took 771 seconds... I'm going to keep trying just in case that was the first time only, but 12 minutes is still a very long time for an initial fix .
Also - I've found that I'm getting more and more bootloop problems even with clean installs - so wiping cache, data, dalvic, etc. Is there some way to do a *thorough* wipe without bricking the phone? I can back all my data up no worries, but next time I move to JB (in the optimism that the BT issues will be fixed soon, judging by the positive progress being made by Spyke ) I would like to do a clean build from scratch and not have to gamble being able to start the phone up again
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
I, also, had reverted to using JB Because GPS wouldn't work ... There's a thread in here (search for it) that shows the solution to the GPS fix, its editing sirgps.conf and gps.conf ... I was getting a fix on GPS in under 30 seconds.... GPS was a huge let down in the stock ICS rom, Even when using TheGreaterGoods LiteRom w/ GPS fix I found after a couple of days my gps didn't hold....
Thanks for the reply.
I was considering formatting /system this morning when I was getting stuck in a boot loop from trying to get M3 running, but decided it was a risk I'd have to check up on first . Next time I do a build from scratch (I'm going to resist until the BT stuff is working - fingers crossed!) I'll do that.
I remember having a look at the gps.conf fix but don't recall anything about sirgps.conf - so I will look it up, thanks!
As an aside, I've been checking the GPS fix a couple of times since my last post and it is coming up in under 30 seconds each time... I'm wondering if my attempt to flash the Rogers modem did in fact fix the issue... I'd do a reboot but I'm too scared I won't get the phone up again XD
EDIT:
Found the fix, I did a few of the changes (rather than all of them), and it's now picking up 8 satellites instead of 3-5, and getting a stronger signal from each... and all I did was point it to the AU ntp server, and tell it I'm not on the ATT network . I'll save the suggested settings to a text file on my SD card so next time I'm out and about and if it plays up I'll have access to the details.
yohan4ws said:
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
Click to expand...
Click to collapse
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
davidpartay said:
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
That has to be very concerning to you, I've never had an issue booting any ROM. And very strange flashing the Kernel separately would resolve your booting issues...
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
If I were in your position I would try and do a full revert back to the earliest version of gingerbread I could find on samfirmware and then use Kies to udpate - THEN I would retry flashing to a newer JB or ICS Rom.
Pretty time consuming but that is the price we pay to mod
davidpartay said:
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
yohan4ws said:
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
Click to expand...
Click to collapse
Not yet. I'll have to check which ones I have - I'm certain I have the AT&T ICS rom from November but then I'd have to go digging through my email for the unlock code again, so I'm trying to avoid doing that at this point . If i can find the stock GB Rogers rom at some point I might flash that one back on before I do any more upgrades. The phone is up and running at this point though, so I'm not too fussed. I've also noticed that it's a little quicker than before so I think the version of LiteKernel I installed was a good idea anyway.
bubor said:
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
Click to expand...
Click to collapse
I've tried pulling the battery a few times, but probably no longer than 30 seconds. Next time I'll give it a couple of minutes. I tend to do this late at night when I'm not expecting any calls (except fire brigade but I have a pager for that too) so time without a phone is no issue to me
Yesssss
After much irritation at continually getting stuck in boot loops again, I've 'Oneclicked' the phone twice, got fed up with the AT&T ICS ROM within about 5 minutes, gave up on IcePop because of buggy GAPPS...
And thought, bugger it. Format /system. Factory reset. Clear cache + Dalvik. Installed in this order:
Jellybean 4.2 ROM from 0217
Spyke's M3 update
PAC rom
GAPPS dated 0427
"Kick-ass Kernel"
and it BOOTED FIRST GO
I am pleased
Does JB need already to be installed before putting the M3 revisions on? Maybe that's where I've been going wrong all along, because my attempts at running both the standard M3 and PAC ROM (even immediately after OneClicking) resulted in boot loops or eternal boot loading.
Uhh... what do you mean by "One Clicking" ??
I know there's a "superoneclick" that will flash and root the rom all at once, but I never personally found it to work for our glides.
Using CWM and installing the ROM through the CWM boot menu is severaly key presses so ... not too sure what you're referring to.
Also, I've always downloaded to a hardwired computer then copied over USB to my phone and flashed ... sometimes the download will have errors if I grab it from my phone.
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
davidpartay said:
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
Click to expand...
Click to collapse
Interesting... for future reference, www.samfirmware.com has the stock firmwares, then there's the superUser file floating around the forums that allows you to root by flashing it. Passed that, remove bloat.
Glad you got it working! Welcome to JB
Alright, so I am having this weird issue. I thought I found the fix for it several times, however, NO dice.
I've researched for a few hours now, I just don't know if I have over looked it or what. If it has been answered, I apologize.
I looked at the modified recoveries thread for newer s3 devices, but it doesn't seem to fit my area of error.
The Details:
I've been really curious to try some 4.3 roms. Of course, they are for D2SPR. I get them to flash correctly, after a full wipe. The issue happens right after I set everything up in the phone, and reboot. When I reboot I get hung at the splash screen. I have tried to reflash the rom muliple times only to fall flat on the splash screen again. Now, I don't have an SD Card in the phone, except, I left a TW rom in a folder. I use twrp, forgot to mention that. I rewiped the phone and installed that touchwiz rom, and still it wouldn't allow me to get past splash into that tw rom.
So the only way that I could think of to get out of this hole was to flash the rooted LJ7 tar file I have through ODIN. After getting the S3 into download mode, Odin successfully push LJ7 into my phone. Now again, I had an issue getting it to boot. I read somewhere that when this happens, I need to check the Erase NAND option in Odin. So I tried that out and forced LJ7 back on. After successfully flashing, it boots but gets stuck on the boot animation; the fix to that is booting into stock recovery and wiping once more. Then you are able to get into the OS.
I let the phone sit and take the OTAs till I get from LJ7 to MD4 so I re-root the phone using Odin and Chain Fire's root method. Now I am able to flash the recovery (TWRP) using OpenScript through Goo Manager.
I've only tried flashing Illusion and Carbon's 4.3 rom. The second time I used Carbon's rom. Same results. So I have no Idea what the heck is going on. Can anyone explain this to me better or point me into the direction that I need to go?
Thanks much!
your not the only one that has this problem i have the same thing have tried everything and most of the 4.3 roms same thing. no one on xda seems to know at least i havent gotten any help or responses i have just given u on 4.3. good luck finding any ideas.
Set it up I'm sure you restored some apps and data which may no longer be compatible. Or data which is corrupting the 4.3 rom. Try just flashing the rom setting up your Google account and don't add any apps. See if it does it.
Either way this seems to be a common issue across different devices and 4.3 seems it's part of using roms built on leaks and ports. None are bug free. Very similar to all gb leaks back in the day that would go into bootlooping.
Have a great day!
bbrita said:
your not the only one that has this problem i have the same thing have tried everything and most of the 4.3 roms same thing. no one on xda seems to know at least i havent gotten any help or responses i have just given u on 4.3. good luck finding any ideas.
Click to expand...
Click to collapse
Well, it's good to know that I'm not the only one, however, it's horrible that it's happening to others. I appreciate you spreading the info!
edfunkycold said:
Set it up I'm sure you restored some apps and data which may no longer be compatible. Or data which is corrupting the 4.3 rom. Try just flashing the rom setting up your Google account and don't add any apps. See if it does it.
Either way this seems to be a common issue across different devices and 4.3 seems it's part of using roms built on leaks and ports. None are bug free. Very similar to all gb leaks back in the day that would go into bootlooping.
Have a great day!
Click to expand...
Click to collapse
When I go to set up, I just install about 15 apps, I don't restore. I just download them fresh. I had a habit of doing that and it just stuck. I don't restore anything with Titanium or and root backup/restore app. Could one of those apps not be updated then that causes the partitions to get locked up, or just corrupt /data in general? If that's whats happening.
I just find it extremely odd that I (maybe others), can't wipe, and then re flash another rom; actually I can, it just gets stuck at the splash and never goes forward, that is what had me confused most. If I had an sd card, and formatted data itself, would that fly?
thanks Ed i have tried this after the first 2 tries . i dont have any problems installing 4.3 its just after rebooting it gets stuck. Like you said there are always bugs Im fine with using other roms for now. Hopefully when an official 4.3 drops problems will go away