Related
Could someone give be a brief run down of the case types and attributes. Things like how thick they are, grip levels, impact protection, etc. I've seen tons of jell cases but not sure how jell compares to silicone or tpu and others.
ok theres Silicone cases which are really grippy often flimsy and fit phones kind of loose, they offer really good protection but get stuck in your pocket and attract a **** load of lint, and also because they dont fit tight they let a lot of lint and dirt in between the case and phone
theres hard plastic cases. they come with the grippy matte(rubbery) like material that a lot of like HTC phone use on their back covers, and they also come painted with all sorts of designs and in solid colors and also come in clear, and transparent colors(like smoke and all the colors of the rainbow), these protect your phone very well but the downfall is dirt and sharp edges.
most of these cases are a bit of a ***** to get on and off and most people leave them on for a long long time only to find out that dirt and lint got in between the case and phone and left horrible rub marks all over the phone, not to mention that while flexing and moving the case tends to scratch the contact points on the phone also.
then theres my favorite Gel/Jelly/Crystal/TPU all of which are the same they are a hard rubberish case that in most cases are easy to remove and put on and fit the phone like a glove (not leaving a lot of room for dust and dirt to get in) not meaning that dirt doesn't get in but its minimal when compared to the other two types of cases. they protect your phone just as well as any other case, have moderate grip (not too grippy like the Silicone and not too little grip like the hard cases) i compare the feel to kind of like the invisible shield "kind of grip" they come in solid colors and in clear tints
Ive bought all of these cases before on multiple phones (G1, Mytouch, Nexus, HD 2) and I have given all of these a chance and no matter how many times i buy a hard case or a silicone case i always end up with a Gel/TPU case, they fit great add the least amount of bulk out of the three and have saved all of my phones from concrete and tile drops multiple times (almost **** my pants when i did it with my Nexus and HD2 though )
with all these cases your going to have to remove the case every once in a while to get the dust out that gets in between the case and phone (unless you like scratches on your phone) thats the common downside to all of these cases but in return you have the security that you wont crack or damage your phone and it will last you
Great write up, thanks.
So is there little difference between the Gel/Jelly/Crystal/TPU? Reason I ask is that I have the t-mo jell case right now and find it makes the phone too big. I am willing to lose some protection to get something a little thinner and did not know if one of the other materials would be a better fit.
I actually found that the T-Mo case is one of the better ones out there. It it not your normal flimsy rubber gel like I had with my HD2, but fits very snuggly and actually adds a little bit of weight to the phone, which makes it feel a little more solid. (once again, coming from an HD2 that was metal).
There are a couple of other threads about the cases, but most of them say the T-mo case is one of the better ones right now. Because the phones are new, there is not too much in the way accessories at this time.
dmtaub said:
I actually found that the T-Mo case is one of the better ones out there. It it not your normal flimsy rubber gel like I had with my HD2, but fits very snuggly and actually adds a little bit of weight to the phone, which makes it feel a little more solid. (once again, coming from an HD2 that was metal).
There are a couple of other threads about the cases, but most of them say the T-mo case is one of the better ones right now. Because the phones are new, there is not too much in the way accessories at this time.
Click to expand...
Click to collapse
that sounds kind of what i am looking for. so do they just have this one at t mobile stores? or are there several that i need to try to see which is which? the one you are describing, its not flimsly like those silicone gels?
also, what screen protector do you reccommend? I know there are other threads, but it sounds like you have tried many.
not trying to thread jack
kboater said:
not trying to thread jack
Click to expand...
Click to collapse
Damn thread jackers... I kid.
Just an FYI and I know lots of popel love the t-mo case. Some pics to show how it increases the size of the phone. You can see a vibrant t-mo case, naked and G1.
i played with the one my tmo store had when i purchased my phone and it seems way more sturdy and better quality than most (I hated the one that came with my HD2 that ***** was flimsy as hell) my only gripe with that case is the fat lip around the edge of the screen, other than that i like it, but TPU cases IMO add the least amount of thickness heres some pics to clear up names between the different type of cases
Heres a Silicone (like the one at the T-Mo store) T-mo's is way better in quality though
http://cgi.ebay.com/BLACK-SILICONE-...ewItem&pt=PDA_Accessories&hash=item43a077b6a9
heres the TPU/Gel/Jelly/Crystal/Hard Rubberish stuff
http://cgi.ebay.com/2-x-TPU-Case-Fi...AU_MobilePhoneAccessories&hash=item3caf486870
http://cgi.ebay.com/1-Silicone-Gel-...t=LH_DefaultDomain_0&var=&hash=item84b70ce076
I think Im about to take a plunge for a Galaxy S version since its been somewhat verified that it fits the Vibrant
Soooooo... theres also hybrid cases lol that mix both TPU and Silicone and that Mix hard Plastic and TPU
Hard Plastic and TPU
http://www.youtube.com/watch?v=3QhIb8OT9zI&feature=channel
Silicone and TPU
http://www.youtube.com/watch?v=sIi9cbm7HxU
to explain the differences in TPU, SILICONE and PLASTIC
TPU means Thermoplastic Urethane/Polyurethane BTW in case anyone was wondering (Sorry i just found out lol)
oh yeah and Silicone means BOOBIES lol
SykesAT said:
Damn thread jackers... I kid.
Just an FYI and I know lots of popel love the t-mo case. Some pics to show how it increases the size of the phone. You can see a vibrant t-mo case, naked and G1.
Click to expand...
Click to collapse
that looks really nice and protective. does look like it adds some size though. I think im going to check it out as I really want something right now and dont want to wait form something to ship from hong kong off ebay.
i know, off topic, but what screen protector are you using in the pics? do you like it? I know in the other thread people recommned the somthing freak, but I dont love the idea of putting water all over my new phone. Most say the protectors from tmobile store are dull and dull down your screen...
kboater said:
that looks really nice and protective. does look like it adds some size though. I think im going to check it out as I really want something right now and dont want to wait form something to ship from hong kong off ebay.
i know, off topic, but what screen protector are you using in the pics? do you like it? I know in the other thread people recommned the somthing freak, but I dont love the idea of putting water all over my new phone. Most say the protectors from tmobile store are dull and dull down your screen...
Click to expand...
Click to collapse
I still have the ones that came on the phone... Still trying to determine what to buy... given myself till the end of the week to decide.
On my G1 I use bodyguardz. I really liked it but two years have passed so I wanted to see if there was anything else that people liked. I would be happy to get bodyguardz again.
Gel/jelly are the same as silicone cases (soft)- not the same as crystal/TPU cases (a bit harder).
-bZj
_____
-sent from my Samsung Vibrant via XDAapp
YOU DONT KNOW ****!!!!!!! lol j/k ok lets just call it TPU and Silicone to keep it simple
just ordered my TPU case with 3 screen protectors (you know since i have 3 screens) and three wipe cloths (in case i forget my hanky?) as you can see in the description its a "Silicone" TPU case, it must be a hybrid case? lol j/k Ebay descriptions misinform everyone
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280537757969&ssPageName=STRK:MEWNX:IT
when i "Google'd" Gel case and Jelly case and clicked on "images" a whole **** load of TPU cases came up BTW
^^^ that's what got me kind of confused cause eBayers can list their products as multiple materials and only when you get in and read the fine print does it clarify what it is exactly. I was about to buy the exact one you bought but the buy it now price jumped to $43 as I was going though the checkout process...
thanks for everyone's help with this. Last night I bought a cheapy (link) to hold me over till there are more options.
finally went to the t moble store and got their case. its the same as the one a few posts back that has pictures. I do like it, but wish it fit just a little more snug. im coming from a mytouch that had a snap on hard shell, so im used to them fitting tight. this will do for now. thanks for the info
now, guess ill order the clearfreaks screen protector from ebay... not thrilled, but dont see to many other "good" options at this point
is it true that the silicon type of cases doesnt allow the heat to dissipate and heats up the device ?
MOD EDIT: No advertising
all those links are messed up
dbl post. Sorry.
Mods pls delete this one.
I think he meant these:
http://www.obostore.com/momax-pc-tpu-i-case-pro-for-motorola-atrix-4g-p-1012.html
http://www.obostore.com/rock-ultra-thin-nakedshell-faceplate-for-motorola-atrix-p-1055.html
First one was nice (esp the black one), second has its own flair i guess.
Good cases all around, but how mch bulk these add ? and how is the overall girth affected ? Anybody can clarify that?
I already think that present atrix is just right with its weight and girth so cases might just disturb that.
garrett_tx said:
all those links are messed up
Click to expand...
Click to collapse
I just ordered one of these, black one with transparent back.
http://www.obostore.com/kutoo-tpu-silicone-case-skin-for-motorola-atrix-4g-p-1026.html
hope it looks as good as in pictures.
spacescreamer said:
I think he meant these:
http://www.obostore.com/momax-pc-tpu-i-case-pro-for-motorola-atrix-4g-p-1012.html
http://www.obostore.com/rock-ultra-thin-nakedshell-faceplate-for-motorola-atrix-p-1055.html
First one was nice (esp the black one), second has its own flair i guess.
Good cases all around, but how mch bulk these add ? and how is the overall girth affected ? Anybody can clarify that?
I already think that present atrix is just right with its weight and girth so cases might just disturb that.
Click to expand...
Click to collapse
I just now dropped my phone on the concrete driveway on my way into the house. Luckily, I have the first case/sleeve adorning my Atrix - actually a very close variant without that slick translucent back. Mine is just "all black everything". I smiled as I picked it up off the ground. You know that cracking, smacking sound that your brand new cool-ass super phone makes when it hits the ground? Well mine did not make a sound. The only reason I knew I dropped it is because I felt something missing from my hand. If the first case is anything like the one wrapped around my Atrix - get it. I smiled as I picked it up, just thumbed the dust off the impact corner....
Solid a phone as the Atrix is, that was a guaranteed scratch/dent or what have you without that case.
http://www.bestbuy.ca/en-CA/product/g-zed-g-zed-mobile-motorola-atrix-case-black-gzmoatrskin1/10167359.aspx?path=6447e55fb4e9d37985389c4f76d43d4aen02
I also have the second one - "ROCK". I had high hopes for it with it's low profile and all, but it's in my stuff drawer now. It's a loose fit on the Atrix, and does not offer full impact protection. Your Atrix extends past the protective limits of the case's cut-outs at key spots. An unfortunate drawback to the case's uber thin profile. A well placed fall will more than likely result in scarring. Moreover, the finish on the Rock case, while pretty and matte, is just as slippery, if not more so than the Atrix itself. It feels too insecure in my hands. The first TPU case (or at least the one I have from Best Buy there) is like glue and then slippy when it counts. For example, I can "stick" my phone on my laptop screen and hang it there as I'm dev'ing or flashing, or on a support call for work or what have you and it stays quite put until I remove it. I can also stick it on 90 degree vertical glass surfaces, almost vertical on my ultra suede couch, and other felt type surfaces. At the same time it slips unencumberd into my tight denim jeans pocket without fuss. Well I guess it's just the nature of TPU, so if you've had TPU cases before you might already know this.
Having both myself, I'd highly recommend the first one (as long as it's like the one in the Best Buy link which I believe it is) It's thicker, but it's so bearable it's like the Atrix should have come with it from the factory. It MIGHT add a millimeter to the entire depth of the phone. It's also a sure grip on your Atrix - I know you've wished your Atrix was not as slippy as it is.
I might post some pictures of my Atrix spider-manning all over the place later in its TPU case.
Momax all the way.
i just updated all the links ! sorry for the bad links !
the rock ultra thin case is really thin and doesnt add alot of bulk to it . really living to its name of naked shell . haha
spacescreamer said:
I think he meant these:
http://www.obostore.com/momax-pc-tpu-i-case-pro-for-motorola-atrix-4g-p-1012.html
http://www.obostore.com/rock-ultra-thin-nakedshell-faceplate-for-motorola-atrix-p-1055.html
First one was nice (esp the black one), second has its own flair i guess.
Good cases all around, but how mch bulk these add ? and how is the overall girth affected ? Anybody can clarify that?
I already think that present atrix is just right with its weight and girth so cases might just disturb that.
Click to expand...
Click to collapse
No advertising
i get the point that its to allow some protection while maintaining the form factor, BUT IS IT REALLY WORTH IT?! would i get similar performance from a case thats twice as big or would this just be a piece of crap if you dropped your phone (cause if i crack the screen on this phone ill be ass-out)?
If you want real protection you don't want the feather. At a minimum you want a Seidio surface (for minimum bulk) or active/ Otterbox case. If you want cheap, just go with a tpu from amazon. The problem with the Feather is it doesn't wrap around completely and therefor offers no protection for the screen or corners. That is a case worth bull-snot in my eyes.
In my experience, the thin'n'light cases are only for those who need a little bit of scratch protection (aka desk jockeys like me, but I work on cars and stuff so I need the durability).
If you want the ultimate durability, get an Otterbox Defender. They're bulky as hell, but extremely durable.
If you want good protection without nearly as much bulk go with an Otterbox Commuter like I'm running. No complaints so far, even after a few decent tumbles.
vrgelinas said:
In my experience, the thin'n'light cases are only for those who need a little bit of scratch protection (aka desk jockeys like me, but I work on cars and stuff so I need the durability).
If you want the ultimate durability, get an Otterbox Defender. They're bulky as hell, but extremely durable.
If you want good protection without nearly as much bulk go with an Otterbox Commuter like I'm running. No complaints so far, even after a few decent tumbles.
Click to expand...
Click to collapse
+ 1
I work with cars too and I will never again use a snap on case. They shatter and send the phone flying in the air. I do like the look of the feather though. Maybe I'll try one down the line
Sent from my ADR6350 using Tapatalk
I bought a feather and liked it, not the most protection, but it was enough for my needs and I can't stand big cases. However, after 2 to 3 months, I started noticing small cracks around some of the corners and around the camera opening. They haven't effected the overall structure of the case yet, and I'll admit to taking the phone out of the case god only knows how many times to do battery pulls when I was hacking and flashing a lot of roms. I'm sure this contributed to the cracks, so I won't fault the case entirely.
If you want basic protection in a super small and light case, it's a good option. And for the $16 I paid for it (on ebay, and it included a screen protector) I'm really not too upset at the cracks, again, since I did put the thing through hell.
i broke a feather. that said it took the hit instead of the phone, but they're not all that durable.
i have the feather and it cracked in three places without ever being dropped. not cool. but they shipped me a new one under warranty without making me send mine back. yay. the only reason i got it was because my back cover was making creaking sounds in one corner and this case stopped that without adding bulk.
Bought this case new from ebay knowing about its few problems being reported like the proximity sensor, call problems, and audio issues, but still preferred this over the lifeproof simply for its protection. When i first received it, my initial reaction was "wow, its here, and its HUGE!" But i carefully disassembled it and clean it out just in case, water tested it (passed), dried it off, and finally put my phone in its new suit of armor. It really made the phone huge, and i mean huge, but i honestly dont mind the added bulk because of its substantial protection and it still feels very comfy in hand and doesnt hinder the phones functionality at all. Speaker for music also plays very loudly and crystal clear unlike other reviewers have stated. I think its a great case to buy and kind of essential if you have a very physically active life. Now to the cons (although their aren't many): Unlike many other reviewers of the white version have stated, i dont have call proximity issues, only thing that happens related to proximity is when i turn the phone over to face down while playing music, it pauses, but thats expected because i had that motion option enabled. Next, phone calls work fine and i hear people just fine, but the caller on the other end may have a problem hearing you sometimes. But it rarely happens and most times they can hear you. Easy fixes are bluetooth and earphones. Lastly, the home button definitely requires more pressure to press and the menu/back "buttons" are a little harder to get to but you'll get used to it. Thats the only thing "wrong" with this case honestly and its still excellent to have. I would highly recommend it. If you dont mind a little bulk, get it. Again, great great case :good:
I have a brand new one in original packaging from otterbox if anyone wants, contact me through dm or 6785162209
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing. There are many surface scratches on the screen which you can only see if you look at it while the screen is off under a super, super bright light. Doesn't affect the image quality at all. Outside frame (the gray part) is a little cracked in few places. Not a big deal.
Runs flawless on CM 10.2.1. Undervolted almost 100mV across the board.
I used to be OCD, but decided to save my health instead.
Aftcomet said:
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing.
Click to expand...
Click to collapse
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
bogdaryl said:
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
Click to expand...
Click to collapse
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
aybarrap1 said:
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Fair enough. I suppose we don't always have ideal circumstances to our liking.
NexusS4gFreak said:
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-T999 using xda app-developers app
Aftcomet said:
Fair enough. I suppose we don't always have ideal circumstances to our liking.
Click to expand...
Click to collapse
LOL...I love my phone being slim and I can live with scratches. But after a few near misses with my toddler son and getting soaked a couple of times on the job, I decided I would have to give in. Bring without my phone even for a day would screw up my schedule. Amazing how much I depend on it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
D00ky said:
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
Click to expand...
Click to collapse
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
For everyday protection sure it may be good, but when it comes to 10ft drop, water, being hit, stomped on, and numerous other things, the armor case is the best.
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
NexusS4gFreak said:
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
Click to expand...
Click to collapse
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
D00ky said:
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
Click to expand...
Click to collapse
I finally got 2mm foam as 1mm is hard to get. 2mm foam goes into gaps between ribs on the rubber on the back cover of the case. So this just might do the trick as the case closes ok.
The for the review, I have an Otterbox Defender and love it to death, but I've been thinking of buying one of these.
i have the Acase Superleggera Pro Dual Protection Case on my S3 and it is great!
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
DMF1977 said:
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
Click to expand...
Click to collapse
Not sure but I think that there's no fakes around. Enjoy it.
D00ky said:
Not sure but I think that there's no fakes around. Enjoy it.
Click to expand...
Click to collapse
Thanks!! But I'm sure there are plenty of fakes around...
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
spotmark said:
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
Click to expand...
Click to collapse
I'm not handy and need a case. I will defently lett the naked (and slippery phone) fall...
Also i use a S-pen wich is in my case.
When i clean my phone/case i understand what you mean but it's t dangerous for me...
I've attached a link to the case I use. It also carries my s-pen, but I find that I don't really use the S-Pen. I suppose I'll miss it, the first time I have a need for it.
https://www.amazon.com/gp/product/B0B5CZYR4F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
If you keep in a pocket that's cotton lined you'll get lint build up. Probably something you don't want with this device. At least turn the pocket inside out when washing.
Had that problem with my Buds+ case when kept in the front cotton lined pocket. In the 60/40 cotton/polyester thigh pocket there's no build up. It's now kept in the other cargo pocket as is my N10+. No more build up. No more port cleaning.
I’m on the “no case” team. Phone is already bulky enough… I like the feel of the phone without any case. I have a S-Pen case that came with the preorder goodies, but I only bought it for the S-Pen.
I would love having my Fold naked, but I´m not that brave, so, I use a aramid/kevlar case from AliExpress that is both protective and slim at same time: https://www.aliexpress.com/item/100....order_list.order_list_main.28.5ecf1802HDCCsX
I am still using it without case and love greengray color
ITMASTER said:
I am still using it without case and love greengray color
Click to expand...
Click to collapse
Oh yes most definitely, I kinda wanted the tan one for the goldish frame but I believe this color hands down the best one
spotmark said:
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
Click to expand...
Click to collapse
And naked I think will feel the best but I almost had a couple close calls when it was charging and when I walked by it got hooked on me, and I'm not the biggest fan of how it likes to attract the fingerprints
Naked is best but one drop can be catastrophic!
I've been using the Samsung leather case and am used to it.
I recommend a pouch type holster in any case to carry it around regardless of being in a case or not. If naked, IMHO, it's the ONLY way to go!
I got this one for my Fold 3 and it fits all the xxl sized phones too! The lining is very soft, phone stays clean and scratch and lint free and it's not so bulky and has no hard edges to dig into you when sitting down.
https://www.amazon.com/Nakedcellphone-Samsung-SM-F926-Leather-Vertical/dp/B09DKPT43J/ref=sr_1_18?crid=3PXKAK9P67POV&keywords=fold4+belt+pouch&qid=1669899781&sprefix=fold4+belt+pouch%2Caps%2C59&sr=8-18
Had my first, and only, drop of my phone those morning. No case, off our 34" vanity. It fell face first onto the hard floor. No damage. Whew!
spotmark said:
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
Click to expand...
Click to collapse
Decided I wanted to protect the phone! However the Samsung case I paid 80 $ for sucked. Front screen was really frustrating.
Decided again after reading this thread to go caseless
And just like every other phone I have used in the last ten years, I put skateboard griptape on the back! It is a wonder of the world.
I suggest everyone try it
Now the phone is a joy!! Not pain in the ass
I also enjoy this app called swiftly switch. Gives me a navigation pill wherever I want. I one hand this thing in beast mode and like a Lil navigation pill in the top right for one hand navigation
Thank u
I recommend this https://www.amazon.de/gp/product/B0BG2723M4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
It describes Flip 4 but i bought it for Fold 4, and it was amazing. Very thin, and the Fold looks like a new phone. the stock ases from Samsung are very heavy and not so recommended for the Front screen, but this one is so amazing
device too slippery if no case is on it...............I do like it better w/out one, but don't want the chance to damage it
best case for this phone is Samsung's with the stand at the back the big one. the phone is as thin as it can be and you get a tablet stand at the same time.
TeDeV said:
best case for this phone is Samsung's with the stand at the back the big one. the phone is as thin as it can be and you get a tablet stand at the same time.
Click to expand...
Click to collapse
Best case was last years silicone case. Kept it thing and gave the phone grip with it being silicone
I go naked sometimes after dark.. o wait
I also use my fold 4 naked.. only wah to go like a hero
I would if it wasn't for the camera bump making git a rocking boat when sitting folded on a table.
Usually I do when out though I use the official grip case
I was using a i blason clear case. But that thing attracts so much of my hand oils its a nightmare to keep clean. Just handling it for 5 minutes makes eberythng nasty. Holding this fold 4 naked in my hand is just perfection.
I may return that case. Or keep it for when going outside or work.
Unless someone knows of a better clear case.
Normally i dont care if its clear. But i waited a damn month for this burgundy color and damn strait imma show it somehow lol
ycats said:
device too slippery if no case is on it...............I do like it better w/out one, but don't want the chance to damage it
Click to expand...
Click to collapse
same here. device withouth a case is too slippery, i've read here about skateboard griptape, but not sure about this solution...so I'm using the back kevlar slim case from this pack, front naked: https://www.amazon.de/gp/product/B0BG2723M4/