Hi guys,
first of all... I want to thank everybody who clicked on my thread and tried help me... ... to the point....
I bought WFS with borken digitizer, then went on MR. Eba and bought another one. And here comes first question... was there a Rev.2 or Rev.3 digitizer ? Wasnt sure so picked Rev. 3 ... Disassembled phone a and assembled back with new digitizer... phone start and woalla... touch doesent respond to anything... i knew that it have to be calibrated so maked goldcard, and booted to Hboot... calibration script loaded... everything went fine until it got to DIAG .... blue header with "TP Calibration" appeard... and then... the wild error attacked... red colored "Step 1 NG" and phone hang... tried to run it through night but battery drained... :/
So... I need to get new touchscreen or another goldcard ... or what ? ... and please someone atleast tell me what Step 1 NG means...
Thanks for any suggestions
Best Regards, Peter
P.S.: Sorry for my English... Im from Slovakia... (nobody knows where it is som round it... its in EU ... LOL )
Related
hi all..
sorry for that... But i am really very sad this night..
my sad story is:
i was Reinstalling WWE rom version 1.40.00 for my device (MDA III), when the prossece reached 8% of progress the upgrading program gave me an error message (belive me i don't remember what it was) . after that the device dead and no response for any action i have triad with it
even when i was trying to do soft / hard reset or trying to access the bootloader mode.
all what i have now is a device with blank black screen for ever.
by the way: my device was in GER (german rom) language at the firest time i gut ,and i have upgraded it successfully since 3 months ago.
What can I do?
help me please, Any advice will be appreciated greatfulllllyyyyy..
thanks in advance..
Were you trying to install WM2005? If so try the WM2005 method of getting into bootloader:
Record + Camera + Power + Soft Reset.
If not...
My device once went completely dead and I later discovered the battery had shorted or something and was totally drained. So take out the battery and charge it SEPERATELY. Leave the device with no battery for at least an hour. Thisll do two things:
1) Give the battery a chance to charge up
2) Totally reset the device as the backup battery will depleat.
Leave it for a mimimum of an hour (longer if you can) then put the battery back in and try turning it on.
Hope this helps cos im just guessing really!
Lewis
i'll try :shock: ..then feedback you with the results...
thank you for your great response <Hero>
sorry .. I forgot to say .. i wasn't trying to install WM2005
BigDamHero
U R My hero .. i love U :wink:
happy news N Good result:
I got bootloader mode of my device ... really i got it..
But... whats the next step to make it works :shock: :shock:
sorry really i need your help
If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
If you use MaUpgradeUt_noID (download and instructions on WIKKI page above) then it should just be a double click.
Basically just follow the WIKKI page above.
Hope it works.
Hello!I just bought myself a HTC Touch and I got a problem with it.At first the device worked fine didn`t had any problems but then one day begun to turn off just sudently without doing nothing on him and then this problem is happening increasingly often (and the signal degreases)one day suddently didn`t whant to turn on anymore,doesn`t want to charge,when i connect the charger the orange led doesn`t show up.So I was thinkin to flash it with another ROM but if the device doesn`t turn on not even in bootloader I do not know if it`s possible to do this..So please help me bringing back to life my elf
PS: Sorry for my bad english..:">
Profy_X said:
So please help me bringing back to life my elf
Click to expand...
Click to collapse
You should post in the elf forum right then . I'm not familiar with the elf at all, but as long as there isn't a JTAG interface, there is nothing you can do .
And how thoes the JTAG flashing works?Can you send me a short tutorial please?is there a possibility to brik the device forever?
PS: I allready post to the elf thread
Did anyone dealed with the same problem on a HTC device?
Hi everyone !
i accidentally droop my Diamond , and now screen lights working , but nothing displaed... black screen!!!
what sould i do ??? repair ??? or maybe someone now this problem ?
Please HELP!!!!
Have u seen a microP error at all...stare deeply into your phone...can u see the today screen when the phone is turned on???
If you have seen a microP error then it is a hardware problem that will either a) get repaired under warranty, or b) (if you have no warranty) you can try what I did...remove your battery & SIM card, carefully remove the screws holding down the bottom cover (that was under the SIM). Carefully disconnect the screen to mainboard connector & clean the contacts, reseat the connector, replace the cover, SIM card & battery, turn on the phone & hope for the best.
I followed these directions twice & it has worked twice...
Good Luck!
will try , thx !
didn't solve the problem
Than only repair shop can help you
wrong section
you may get betta advice if u post in the right section, this has nothing to do with rom development
hello this is my first post in this forum and I hope you accept me as friends on this section of HTC Touch Diamond
.. I have a HTC Touch Diamond P3700 ( new) and since yesterday he cannot be Started on .. and I tried several solutions (reset ....) but no result
Could you provide me a solution Please
My Greetings
Aziz
Nice use of font colors. Unfortunately the same cant be said for your phone. Whats your location and from which (country) did you buy your touch diamond from
Just be patient and listen ayyu3m to explain you and he will help you 100%.I have more worst problem than u have
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
newlead said:
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
Click to expand...
Click to collapse
Okay. So what exactly did you do or what exactly happened to your phone?
man did ya try to charge it? maybe the bettray is dead and can ya load the boot screen u know just press the down volume button and reset see if u can see the three colors screen if its then dont worry ... worst thing is just re-flash the rom PM me for extra help buddy
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
lexxa v said:
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
Click to expand...
Click to collapse
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
ayyu3m said:
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
Click to expand...
Click to collapse
I live in Roumania and bought the phone from someone and i don't know where did he get it from... but when i tried the official htc suport they said that my phone was made for Czech Republic and that's why my ROM update doesn't work...
The answer to second question is that i don't know
Can someone help me please? I don't know what to do now...
Btw the person from whom you bought the device is a resident of Romania?
Yes, he is.
okay can you go into bootloader mode and tell me everything on the screen
DIAM100 MFG 64G
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
USB
thankx. thats all i need for now. let me try to come up with a rom for you...
btw did you have any carrier logo before you ran into this problem...i mean like instead of the orange logo did you have any vodafone logo or just the htc logo during start up
AND do you have a front facing camera for video calls?
I had only the htc logo at start-up and i do have a video camera front facing.
Okay i found your stock ROM.
Do exactly as i say....
go to this link and scroll down to bottom...
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
when you go to the bottom of the page, you will be requested to enter ur SERIAL NUMBER which you just found under your battery.
Enter and press submit.
now select the file Windows_Mobile_6.1_East_Europe and start downloading...
let me know if the download has started also
I started the download ...
Okay good. So once the download complete you are ready to flash...
This is how to flash...
1. Put ur device in bootloader mode again.
2. Connect the device to ur PC
3. RUN the downloaded file....and press NEXT NEXT NEXT....
Reply back if the flashing process is goind smooth or even if you face any problem...
Then i can finally go and sleep
Hello!
I have a problem with blue screen. I don't know the past of this phone, I got it in this condition.
Everything you can see in attachements.
Thx for helping.
I used this thread (http://forum.xda-developers.com/showthread.php?t=2049567) to revive this phone. I wrote rom (rom (GBX0*+3.4.26 Full). Now phone is turning on, but touchpad don't work.
My question is: If this rom is correct for my Rhod100? This fault can be done with wrong flash?