Hello everyone,
i know that the Desire HD normaly no MHL and USB-OTG have. A friend talled me that this is a software problem.
My Question is now: Can i add this to my ROM with modding or exist a ROM with working MHL and USB-OTG ???
Thanks for helping - Sorry for bad englisch !
Virus3003
No, at present OTG is not available for our device not even on costume Rom or kernel few developers are working on it though....
Sent from my HTC Desire HD using xda premium
Ok, any update on this?
Grand duos specification mention that OTG function can't be use in this phone..
Any chance for us to get this function work on our phone?..
If got..pls help me to give link for it..
thanks..
What I know is that the hardware does not support. Compared to galaxy note that when usb otg is connected immediately it indicates,grand does not respond when connected.
Sent from my GT-I9082 using xda app-developers app
bongski55 said:
What I know is that the hardware does not support. Compared to galaxy note that when usb otg is connected immediately it indicates,grand does not respond when connected.
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
k2wl bro is working on it bro did you tried v11 kernal ?
adheeshkurekar said:
k2wl bro is working on it bro did you tried v11 kernal ?
Click to expand...
Click to collapse
Yes I am on v11 kernel. Also posted on kernel thread that usb otg not working.
Sent from my GT-I9082 using xda app-developers app
bongski55 said:
Yes I am on v11 kernel. Also posted on kernel thread that usb otg not working.
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
yup..i already notice that also..
my fren already try it..not working on v11..
Thats a huge flaw of our device..
Curse samsung for that..
Just hope that someone comes up with a custom kernel that works...
I personally think that we will need externally powered otg even if the kernel is built..
The pin config. May not support powering the usb drive..
Sent from my GT-I9082 using xda app-developers app
The galaxy note natively supports usb otg but cannot also power a external hard disk. For the grand there is the presence of UsbDriveA-F on the storage.folder. I don't know if this is just a remnant of a samsung generic firmware or a deliberate building block for a future otg support. I really hope so.
Sent from my GT-I9082 using xda app-developers app
safone said:
Grand duos specification mention that OTG function can't be use in this phone..
Any chance for us to get this function work on our phone?..
If got..pls help me to give link for it..
thanks..
Click to expand...
Click to collapse
I came across an app in play store..
USB OTG HELPER
it shows Grand as supported device...
I didnt tried it much.. bt once and it didnt worked.. i didnt tried n tested it..
u may have a look....
dev of d app is on xda also...
screenshot attached...
suporete a otg
They say the cyanogenmod rom for this device has support for OTG
http androidlegend. com /update-samsung-galaxy-grand-duos-i9082i9082l-with-cyanogenmod- 10-1
reve1 said:
Dizem que a rom cyanogenmod para este aparelho tem suporte a otg
androidlegend. com /update-samsung-galaxy-grand-duos-i9082i9082l-with-cyanogenmod- 10-1
Click to expand...
Click to collapse
English please. .
Press Thanks if you like my Work/Advice
Samsung Galaxy Grand Duos i9082 OTG
Hi Everyone,
Can anyone please tell me how do I connect OTG cable with Samsung Galaxy Grand Duos i9082. I have been searching the forums on the web from a long time but I am not able to do that. Please let me know source/software or anything that will help.
Thanks in advance.
Regards,
Rahul Bakshi
k2wl has been trying but until now not yet enabled on the grand. I think hardware not supporting.
reve1 said:
They say the cyanogenmod rom for this device has support for OTG
http androidlegend. com /update-samsung-galaxy-grand-duos-i9082i9082l-with-cyanogenmod- 10-1
Click to expand...
Click to collapse
so like have you or anyone tried with CM? Did otg work? I tried on Gennext rom and Pyramid k3 roms but it didnt i didnt install CM since it only support primary sim slot but if it does support otg im willing to install it so please can anyone check it?
Thnks in advance..!
sorry bro
DayWalker said:
so like have you or anyone tried with CM? Did otg work? I tried on Gennext rom and Pyramid k3 roms but it didnt i didnt install CM since it only support primary sim slot but if it does support otg im willing to install it so please can anyone check it?
Thnks in advance..!
Click to expand...
Click to collapse
sorry bro otg is not working in this rom also
more dead threads getting resurrected...
use neotg app its working
:good::good:
Zephyr! said:
English please. .
Press Thanks if you like my Work/Advice
Click to expand...
Click to collapse
Pls anybody check usb otg function working or not after updating the os of gt-I9082 to 4.2.2
Sent from my GT-I9082 using xda premium
vinay_kumar said:
Pls anybody check usb otg function working or not after updating the os of gt-I9082 to 4.2.2
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
no not working tested
kenxda33 said:
no not working tested
Click to expand...
Click to collapse
My grand also the same ive updated to jb 4.2.2. What if i change the Andriod rom to CM 10.1 or some other rom.. Im a newbie.. Thanks in advance
kernel matters
lahirunc said:
My grand also the same ive updated to jb 4.2.2. What if i change the Andriod rom to CM 10.1 or some other rom.. Im a newbie.. Thanks in advance
Click to expand...
Click to collapse
please read other threads before asking #nooffence .... usb-otg is a feature which depends on kernel of phone! and yet,no kernel of galaxy grand has otg compatibility(seems samsung dont wanna provide one)... k2wl has made some custom kernels but they support only oc..not otg till date!:fingers-crossed:
Hi xda'rs, could someone tell me if there is a way to run the host otg after the stock 4.3 update?
I have to try apps, custom kernel or linux script?
Thanks
Just update the phone to 4.3 if USB Host not working then get back to 4.2 or 4.1
I could try it BUT i don't have an OTG Cable.
Sent from Gallifrey using TARDIS
I'm using Mikes ARHD v22, which is based on stock rom and otg is working fine.
Sent from my GT-N7100 using Tapatalk
Hi, running CivZ kk with original firmware.
I have an UA46F7500BR smart tv.
Just after the tv says the tab is connected, my tab says "unable to start screen mirroring because of a hardware issue"
Tried with:
Resetting the tab
Resetting the tv
Installing Poland 4.4.2 original rom
Installing CivZ 4.4.2 rom
Installing CivZ 4.2.2 rom
Installing ScreenMirroring patch from Google play
Don't know what else to try...
Sent from my GT-N5100 using Tapatalk
In this thread is well explained why it is happening
http://forum.xda-developers.com/showthread.php?p=50597640
as far as I know, there is no option yet to have it working on custom roms on our device
spadella said:
In this thread is well explained why it is happening
http://forum.xda-developers.com/showthread.php?p=50597640
as far as I know, there is no option yet to have it working on custom roms on our device
Click to expand...
Click to collapse
Ouch.. I guess you could sent the tv to me..
Sent from my GT-N5110 using XDA Premium 4 mobile app